Limit On Number Of Sheets
Sep 29, 2007
I am running a macro that contains a template of a report and when it is done adding data to that report, it copies it to a new tab in the workbook, gives it a new name, and repeats with the next set of data in the blank template, over and over again.
Things work well, the code is correct. But I get to a point where the "Copy Sheet to new tab at end of workbook" doesn't work anymore. The copy sheet to new tab doesn't even work outside of the macro. Is there a limit on the number of sheets (it stuck at sheet 27) or a limit to the characters used across all sheets (my tab names can be long)?
The code I am using to copy to a new sheet is pretty simple:
Sheets("REPORT").Select
Sheets("REPORT").Copy After:=Worksheets(Worksheets.Count)
ActiveSheet.Name = SheetName & " Data Report"
Thanks for some clarifications about this problem. I am wondering if there is a limitation in excel that I don't know about.
View 9 Replies
ADVERTISEMENT
Sep 7, 2012
Is there a way to fix the the allowed numberformats in a workbook?
For example, is it possible to have only the following numberformats in a file : 0.0, 0.0% and $0.0. The file should not allow any other formats, and the user should not be able to create custom formats.
View 2 Replies
View Related
Sep 9, 2008
I have a macro that selects a range of about 20 columns and fills down. It works fine on my smaller set of data, but when I use one that has about 40,000 rows I get the error:
FillDown Method of Range Class Failed
It fills down about 7,000 rows, then fillsdown the first cell of the next row, but leaves the others blank. The entire range (including the nonfilled cells) is still selected.
View 9 Replies
View Related
Sep 28, 2009
I am using a diamond shape that is copied into the active sheet when the user runs a macro. The user then selects the shape and enters some text. I want to limit the characters to a certain number or at least be able to give the user some advice when they enter too many characters.
I have found that, as long as I have manually named the shape "Diamond1", I can get the count in my immediate window with the following:
?ActiveSheet.Shapes("Diamond1").TextFrame.Characters.Count
but I want the count to relate to the active shape. So I tried:
?selection.shapeRange.TextFrame.Characters.Count
and I get a "runtime error 438 Object doesn't support this property or method".
How should I count the characters in the selected shape, and then if it is over say 12, require the user to shorten it or at least present yield a message Box?
View 9 Replies
View Related
Nov 26, 2006
I want to automatically prevent users from entering more than two digits into a textbox.
i dont want to show a message box or anything like that. I want it to be physically imposible for them to enter more than two digits i.e. when they enter two digits, pressing any other keys on the keyboard should have no effect on the contents of the textbox.
View 4 Replies
View Related
Mar 5, 2014
How do I limit the number of digits to the right of the decimal in a calculation?
View 3 Replies
View Related
Aug 22, 2006
I'm trying to create a gradesheet in which any score that falls into the
failing range will automatically highlight in red...
View 2 Replies
View Related
Jun 3, 2014
I have a macro that runs every 15 minutes and stores data into a table. This table is attached to a chart and auto updates with the new data every 15minutes. The table will house historical data over time, however I only want the chart to reflect the last 96 entries (15min data points over 24hours). So, once i have enough data my table will be A2:A97. When A98 is populated, i want the data in A2 to be removed from the chart only.
Here is a breakdown:
A2:A97 is currently displayed on the chart.
I enter new data into A98.
The chart will now display A3:A98.
I enter new data into A99.
The chart will now display A4:A99.
I enter new data into A100.
The chart will now display A5:A100.
and so on.
How I can accomplish this? Does this need to be done in VBA?
View 3 Replies
View Related
Jul 9, 2014
trying to limit the number of characters entered in a cell.
I clicked on Custom then =LEN(A10)=6 which works when i enter more or less than 6 characters, however it lets you paste in something which has more than 6 charters.
View 8 Replies
View Related
Jun 4, 2008
I'm making a line diagram, showing how a value changes over time. My data is measured every 30 min, which results in a mess when it's plotted over a month.
How do I limit the number of times shown on the x-axis, for instance so that only the date (every 24 hours) is shown?
View 9 Replies
View Related
Feb 1, 2008
I wish to limit the number of text characters in a cell and have excel prevent the entry of additional characters after limit is reached. I have tried the Data Validation but it does not preven the entry of additional characters. I want to be able to show the error immediately when the limit is reached and no additional characters are permitted.
View 3 Replies
View Related
May 29, 2014
content from form is captured via formulas to a CIMLoad format on another tab
Users keep entering four to six decimal places in weight value
I need to limit the cell to either whole numbers, or a maximum of 2 decimal places
The cell is formatted to two decimal places, but when you activate the cell it shows the full value they entered, and so does my CIMLoad
How to I limit the value in this cell to whole numbers or numbers with a maximum of two decimal places?
View 7 Replies
View Related
Mar 23, 2009
I'm using the prob() function, and it works for no more than 61 random numbers. Does anyone know of a limit on the number of random numbers used in the function, and whether it's possible to use more numbers in the function? My formula is:
=PROB($C$11:$C$71,$L$11:$L$71,G11,H11)
View 11 Replies
View Related
Nov 27, 2013
I would love to be able to limit the number of rows in a specific sheet so that I can quickly carry formulas to the bottom of a worksheet without carrying them to row 1,048,576. I'm aware of options to hide rows and/or to limit the scrolling with the "view code" option on the worksheet tab; however, I'm mainly worried about worksheet performance. When I carry a formula down, I don't want to see a spinning blue circle run for minutes at a time, and I'm hoping to avoid the same spinning circle when I undo my formula. Is there any way to actually limit the number of rows, or is there any other limitation I could put in that would increase worksheet performance?
View 1 Replies
View Related
Jan 24, 2014
When you want to use Data Validation to limit the entry of the number of characters to a cell does this apply only to the cell that you are entering the characters or can it also apply to a cell that contains a LEN(A1) formula, for instance? Also,does the Data Validation limitation function includes spaces as well? Will the message appear while you are entering the characters (when it has reached the limit) or will it wait until you have hit Enter?
View 1 Replies
View Related
Jun 22, 2007
In sheet1, (B2 & C2) are the numbers entered by the user. After they entered, it will create rows of table according to the number of groups they entered on the respective sheets.
how do I let it create the groups itself?
View 9 Replies
View Related
Nov 3, 2008
How increase Sheets number+1 for all Sheets with Vba?
View 10 Replies
View Related
Dec 3, 2013
I have a workbook with the following sheets i do not want to hide called "Detailed Template", "INTERFACES", "STATUS".
I then have a number of worksheets which have their names as cell addresses i.e. "E4", "E5", "D4", "F4", "G7" and so on.
I would like to hide all worksheets (except the 3 mentioned at the top [which are sheets 1-3]) and any which contain say the value of '4'. This value is defined by a cell in the "INTERFACES" worksheet say 'A1' for example.
I want the macro to be able to automatically do this for which ever value is in 'A1'. So if it were to change to '7' it would hide every sheet that doesn't contain '7' in the name.
View 6 Replies
View Related
Oct 8, 2008
i want to match the cell phone numbers from the sheet working in the column C:C with the sheet GSM column A:A if it match the it has to print the data in GSM sheet column B:B in the working sheet
For (Eg) working sheet data as mentioned below
C
9841 9444 4424 4424 9841
GSM Data as mentioned below
A B 9762 Airtel 9762 Vodafone 9768 BPL 9768 Aircel 9782 Aircel 9783 Aircel 9095 Aircel 9715 BPL 9788 BPL 9788 BPL
if it match it as to update in working sheet as
C D 9841 Aircel 9444 Cell one 4424 Lan line 4424 Lan line 9841 Aircel
View 9 Replies
View Related
Feb 25, 2009
I tried to Google this question but cannot find the answer. What is the maximum number of worksheets that Excel can hide within a workbook? I have a macro which hides all worksheets with the exception of the active worksheet and it has never failed. But this morning I had started working on a workbook containing many sheets and when I ran my HideSheets macro a maximum of 14 sheets hides every time. Is it my code (see below)?
View 2 Replies
View Related
Sep 3, 2007
Im trying to do a macro that will move data from a number of sheets based on a flag in column W on each sheet.
Basically if the flag in column W is "YES" then i want it to copy the whole row and append it (if thats possible?) into the sheet 'Journal'
I have attached a cut down version with only 3 sheets (one of which is the 'Journal' sheet) and only a few rows on each sheet.
View 10 Replies
View Related
May 8, 2008
I tried this macro, written by Leith, to organize a workbook of over 100 worksheets, all named as a 3 digit number. (001, 002, 007, 004, 018, 12, etc.)
For some reason, there was no order to the sorting. Can the macro above be modified to sort my sheets in numeric order?
View 9 Replies
View Related
Nov 10, 2008
I have attached a file containing 3 worksheets (Header, Well, Prod_Abstract) that I want to merge together (MERGED worksheet given) based on a unique number (Entity - Column A) in all three. Well and Prod_Abstract are color highlighted in MERGED to show finished product. The colors are for demonstration only.
View 5 Replies
View Related
Feb 12, 2010
1) This spreadsheet has 7 main sheets, UK, IBE, FIN, BENE, FRA.
2) Each main sheet has 8 sub sheets i.e UK CAT A to H, IBE CAT A to H etc.
3) col BO on the main sheets will have CAT A,B to H and can contain some other text but i'm only concerned about the CAT. Also Cat may be wrote CAT, cat or Cat etc
At the moment i'm using a loop, I had some code from another thread yesterday but this code creates new sheets if it can not find a sheet named the same
I will need to run this as 1 i.e all 7 together or 1 at a time.
View 14 Replies
View Related
Sep 27, 2013
Code:
Sub Copy_and_Layout()
Dim ws As Worksheet
ThisWorkbook.Activate
For Each ws In ActiveWorkbook.Worksheets
ws.Activate
If Left(ws.Name, 5) = "Sheet" Then
Range("B2:G" & ws.UsedRange.Rows.count).Copy
Sheets("Rev New").Range("B1").Insert xlDown
End If
Next ws
End Sub
So far I have this as a code but it seems to only paste the last sheet at the top ....
View 3 Replies
View Related
Mar 26, 2011
Need to find a column of numbers from one worksheet and delete them from another.
Example
To be deleted is below:
83221
83223
83232
83233
83236
to be deleted from is below:
83221
83223
83226
83227
83228
83229
83230
83232
83233
83234
83235
83236
Another issues is that the worksheet that needs to have the numbers deleted from has 3 columns total so the whole row would need deleting, or if its easier I could replace the numbers with 0 and then sort and delete.
View 9 Replies
View Related
Feb 23, 2010
Working with an existing macro from this forum. How do I create the array showing the number of sheets found? I know from a MsgBox that two sheets are found.
View 3 Replies
View Related
Aug 25, 2010
I am trying to build a macro to work with a template file.
The template file has set sheet numbers and names (with one exception, see 4) below).
There are close to 40 sheets in all.
Some sheets are never printed.
Some sheets are always printed.
Many sheets are printed only if they are used.
Most of the sheets are 'break out' sheets and a variable number of them will be used.
So... Here is what I'm trying to accomplish.
1) Always print Sheet4(Overview1)
2) Always print Sheet6(Overview2)
3) Print Sheets 11 thru 40 IF value in cell G50 on these sheets is > 0. Note that this cell has a name (Total) and I would like to reference the name if possible. (It could happen that further evolution of the Workbook moves the cell up or down a row.)
4) Print Sheet38(Data Sort) IF it exists. Otherwise, print Sheet1(Data).
If the information on the Data sheet is limited (eg only 1 or 2 pages), we print it off directly. If the information is more extensive, we copy it to a new sheet and sort it (Data Sort).
I can achieve 1) and 2). I'm not quite sure how to go about 3) as I'm still not very good with macro loops. 4) I haven't tackled yet.
View 3 Replies
View Related
Mar 13, 2014
I am using this codes to extract csv in to my workbook, how to extract only the specific no. of rows from a csv instead of all the rows, I would like to extract only the last 5000 rows of data
Code:
Option Explicit
Sub ConvertCSVs()
Dim wkbDest As Workbook
Dim wksDest As Worksheet
Dim strPath As String
[Code] .........
View 9 Replies
View Related
Aug 21, 2007
I am trying to find a way to print an "entire workbook", but have each of the sheets paged as a group separate from the rest. One workbook typically has up to 20 sheets, with each sheet up to roughly 8 pages. I need each sheet set to show page 1 of 8 or page 5 of 8, not page 22 of 53. Counting and typing in the total number of pages in each sheet's footer is too cumbersome. Also, printing each sheet individually has also been cumbersome when printing to PDF. Are there any other ways to have the "&[Pages]" function only reflect the number of pages within the sheet instead of in the entire workbook?
View 9 Replies
View Related
