Linear Regression On Single Set Of Numbers
Jan 27, 2013If I have a set of numbers 1,2,3,4,5,6,7,8,9 in cells, how can I get a line of best fit, linear regression, in the cells next to them?
View 1 RepliesIf I have a set of numbers 1,2,3,4,5,6,7,8,9 in cells, how can I get a line of best fit, linear regression, in the cells next to them?
View 1 RepliesI was handed the attached file. understand everything except how the values in row 6 were derived No formula present when I received the file, just the numbers. Row 7 is hard entered scores the units achieved
View 8 Replies View RelatedI would like to run a multiple linear regression in vba. I have one dependent and three explanatory variables. I will have to use a macro of some kind, since I need to run too many regressions to do it manually. To simplify things a little bit:
- There will always be exactly three independent variables
- There are no missing values
- The data is allways numerical
I've already got four ranges defined: Yrange, X1range, X2range, X3range. I would like to take these ranges as input parameters for the regression model. The only two parameters I need are Sum Square for Regression (SSR) and the degrees of freedom. I understand that you can use excel's matrix formulas to calculate some of the input parameters, but one doesn't really get around vba. Any (simple) source code allowing me to conduct a regression with three input parameters?
I have set up a linear regression array in Excel and now want to test the significance of my r2 value at a certain level of significance. I've only been able to find tables that give the critical r value, but I want to test it at 99.73% level of confidence and none of them contain that specific value. Is there a way to do this in Excel?
View 3 Replies View RelatedI have a set of data. I know how to do linear regression over the whole set of data. How do I have another linear regression over the first 5 points in the set of data on the same graph ?? I am using Excel 2007
The above is a screenshot of the data analysis (regression) I want to automate with vba code. Like all macros, I tried to record first and only got the following
View 3 Replies View RelatedI have the following dataset and was wondering how I can run a constrained regression in Excel with the constraint being that the total allocation of assets is 100%:
Total return (y): 12 data points
Asset 1 (x1): 12 data points
Asset 2 (x2): 12 data points
Asset 3 (x3): 12 data points
Asset 4 (x4): 12 data points
Asset 5 (x5): 12 data points
Asset 6 (x6): 12 data points
[Attached is a spreadsheet with the actual dataset]
I know the regression equation I need is R = b1X1 + b2X2 + ….+ (1 - b1 - b2 -….- b5 )X6 + e
I am wanting to write a macro which uses the excel multiple regression function (a part of the data analysis add-in). I tried recording a macro while I selected the regression function (Tools> Data Analysis... etc.) which produced the following:
View 3 Replies View RelatedI am trying to set up the formula y = ax^2 + bx + c. Is there a function for that in excel?
To get a little more into my overall goal. I will have a x constant that will remain the same, but I have 8 different sets of a,b, & c coefficients. So, I would like to set up something like, if a row is labeled A1, find the A1 set of coefficients and use them in the quadratic equation. I was thinking I would need to use a CSE, is that correct?
With exception to Duplicate numbers on a single row, or column. I am hoping I can check an entire row against other rows, to see idf the same number are repeated.
Unlike the Lotto, this is about Safety boxes, where I have sequential numbering such as the following:
Row2:5,11,15,16,19,35
Row16: 2,8,12,17,18,33,
Row102: 2,6,8,14,22,44
Row645: 2,6,8,14,22,44
Notice rows 102 and 645
I can't believe all of our staff missed the duplicate lines 102 and 645 of duplicate Although these row numbers were rows 2, 16, 102, & 245
im using a formula to count how many time a customer has payed their bill using COUNTIF.
along with that i would like to use some kind of reference or a secont formula like
=COUNTIF(range1:range2,"Jean K") + another formula, so it will only calculate the amount Jean K has paid, and won;t count everyones elses paymets. i just need a little help to make this happen.
and also included a sample of my sheet in a ScreenShot.
Ok so heres an example workbook:
Book5.xlsx
As you can see from the workbook, each column's amount of numbers depends on the data pulled from an index/match function.
These numbers will change and I want the TREND function to dynamically change with the data.
I have one question about the regression. i know how can i do it lineair, exponentiel ... but how can i make a personnalised regression ? for example, if i have i function f(x)=a+b*x^2 or another function ... how can i introduce my function to draw the regression ? i have excel 2007
View 2 Replies View RelatedI am trying to do multivariate polynomial regression in excel, trying to correlate data of the form y=f(x1,x2) with second order polynomials:
Y = c + a1*x1 + a2*x1^2 + a3^x1^3 + b1*x2 + b2*x2^2 + b3*x2^3
Using the following command, I have achieved this:
=LINEST(A2:A10,B2:B10^{1,2,3,0,0,0}*C2:C10^{0,0,0, 1,2,3},TRUE,TRUE)
theory Excel uses for this kind of regression?
Given 100 samples, to calculate: numbers of hours spent on study is dependent on numbers of hours spent on social networking site.
x (social networking site)
y (study)
x^2
xy
6
4
36
16
24
[Code] .......
SUMMARY OUTPUT
SUMMARY OUTPUT
Regression Statistics
Regression Statistics
Multiple R
0.571423290877713
[Code] ....
So, I've got the coefficient of correlation equals to 0.57, how can I plot my scatter graph?
What is the function to add numbers in a single cell to show only a single number. I know it can be done but do not know the quick function to do it.
View 10 Replies View RelatedI have a string of numbers like this:
378 398 308 978 397 328 078 307 908 278
And this code works fine except for I get a Type 13 Mismatch error on this line of code:
Code:
x = Application.Transpose(Split(my_cell.Value, " "))
Here is the entire sub:
Code:
Public Sub split_down()
Dim x As Variant
Dim my_range As Range
[Code]....
How can I adjust this for several lines of numbers like this?
378 398 308 978 397 328 078 307 908 278
390 327 928 678 392 907 208 320 927 178
608 394 207 578 391 920 108 607 395 324
508 321 168 107 325 924 568 507 341 921
167 345 925 518 567 351 941 160 945 517
560 951 241 245 510 251 516 451 388 338
788 988 337 088 778 339 377 288 330 998
And what is going on with this error. The first number string above should be placed in cell A1 when trying this code.
I'm Importing Columns from one sheet to another in the same workbook. imports good But:
1- Some columns with first records/rows blank do not import at all.
2- I have a column with some letter/numbers combinations and single numbers at times. Those single numbers are not imported. And half my data in that column are single numbers.
In row G, I have a wide range of values from -3000 up to 2500.
These values are generated from a formula. =A5-B5.
I need a script that will scan row G between G5:G500 and give them a letter value.
Convert anything less than 0 to an A
Convert anything equal to 0 or equal to 1 to a B
Convert anything between 2 and 7 to a C
Convert anything greater than 7 to a D
It can place the new categorized letter value over the original formula in row G or put the letter value right next to it in H.
I'm trying to write a macro that will analyze data from one spreadsheet and do a regression. The information I want to be output on the same sheet. I tried to use the record function, but I got an error. It said "Run-time error '1004': ATPVBAEN.XLA could not be found. The code read:
View 2 Replies View RelatedI am trying to write a function that will give me the amount of time a certain number shows up in the same digit place in a large set of numbers.
For example:
111112221233313
111212222233323
111312223233333
111412224233343
111512225233353
111612226233363
111712227233373
111812228233383
111912229233393
given the number set how many times does the number 5 show up in the 4th digit. I know its 3 but for the data size I need to run it on, it is impossible to count.
What function would count how many times a certain number shows up in the same spot?
When I enter the function below as a User Defined Function it gives me a "#NAME?" error. I entered in J12 as:
Code:
"=condense(D12,E12,F12,G12,H12)"
I have values for each column is row 12.
Code:
Function condense(ByVal d1, ByVal d2, ByVal d3, ByVal d4, ByVal d5)
condense = d1 & d2 & d3 & d4 & d5
End Function
How do produce a 5 position number from 5 single numbers?
I am trying to write a macro that will select and copy all cells in a row that do not have a zero value.
The data I am trying to select will be contained in 12 cells in a single row, i.e cells A1:L1 and all zero values will always be on the right hand side of the first non-zero value in this row (going left to right), for example:
Row: A B C D E F G H I J K L
(1) 0 0 0 0 1 1 2 2 2 2 2 2
What I want to do here is to select and copy cells E1 to L1, since they are the cells with non-zero values. This can vary, so here there are 8 cells with non-zero values but the next time there might be only 5 cell or all 12 cells, etc. I have a lot of data to sort like this so doing this manually takes a lot of time.
Once the macro has selected and copied the right cells, I will manually paste the data where I need to put it.
The big problem I am having is knowing how to firstly select the appropiate cells.
I have set up a spreadsheet template that automatically populates specific values through the spreadsheet based on what the value of cell "A1" is. I want to run through 224 potential values in cell A1 and print out the worksheet after each potential value.
My thought on how to approach it is to write a macro that:
1. Selects the next item from the drop down box in cell A1
2. Prints the page (using default print settings)
3. Loops
But I don't know what the code would be. Cell A1 also does not need to be a drop down box, as long as it incrementally runs through all 224 listed values and prints after each one.
need an excel simple formula or function that returns values of y for given x in a two-dimensional array and works in the following way.actually a combination of linear interpolation and lookup/linear search. as in following example
x y
1 10
2 15
3 20
if x=1.5 then y=12.5 (answer available thru FORECAST but incomplete)
if x=2 then y=15 (answer available thru LOOKUP but incomplete)
so for whatever the x i need/get a valid y thru a single formula/method !
sorry m not good in math,
to getting accurate regression coefficients from a dataset with *small* (standard) numbers, which contains centered predictors. More specifically, I have a dataset with 18 observed data points containing a criterion (y), a centered predictor variable (x), another centered predictor variable (z), and the interaction of the two centered predictor variables (xz). This multiple regression equation is structured to test for interactions between the two continuous predictor variables (x and z) as prescribed by Aiken and West (1991) in their classic book.
When I run the regression in Excel with the centered predictors, some of the regression coefficents in the output are estimated to be 0, although they are clealry *not* 0 as estimated by SPSS 14.0.2. I have spent many hours troubleshooting this problem (and searched many forums on the internet) and still do not know why this is happening.
Initially, I thought the problem might have to do with the cross-product of the centered predictors, but even just doing a regression with one of the centered predictors (for certain centered predictors) yields a regression coefficient of 0 (although it should be non-zero as per SPSS 14.0.2). When doing these multiple regressions with non-centered predictors, all regression coefficients are estimated accurately.
I was wondering if anyone had any insights on why I am experiencing these problems.... If anyone wants a sample of some test data I have used to troubleshoot these problems, you can download a file from: [url] and/or email me at (email deleted by Mod) for more datasets or questions.
As i am working on consolidating the Missing numbers manually, whether will it possible for making this automatic.
In Column "A" I have Multiple Duplicate Invoice Numbers and followed by the Different Transcation numbers in Column "B".
In Column "D" I have Each Invoice Numbers and in Column "E" Total Transaction Numbers i.e., no. of times each Invoice have Transactions.
In Column "F" No. of times we received the Transactions.
Here i need to manually need to update each Invoice's Missing Transaction number in Column "H" in single cell with comma separated to each Missing Transaction numbers.
Example:
Before : (Column "A" & "B")
Invoice NumbersTransaction NumbersInvoice NumbersTotal Transaction NumbersReceived Transaction Numbers
A2014000351501 A201400035150 3 2
A2014000351502 A201400035494 13 12
A2014000354941 A201400035881 12 11
A2014000354942 A201400035884 19 17
A2014000354943 A201400035888 14 13
A2014000354944 A201400037613 5 1
A2014000354945
[Code]...
Instead of doing this manually can we have the VBA to auto Update these missing numbers.
Here by i am attaching sample file.
I need find consecutive Numbers in a singles Cell but each numbers have a leading zero and "-" (Dash)
My problem is that the UDF that i found on this forum, is for numbers with out leading zero with comma ",",
So even if change the "," by "-", still getting a error Because the Code is designed to Read numbers Formats different than mine..
My Numbers are located in Cell G12 (down), and the message that i need to show in the cell result is :
If Found :
0 Consecutives --> 0
2 Consecutives --> 2
3 consecutives --> 3
4 consecutives --> 4
5 consecutives --> 5
2 Set of consecutives --> 2S
Example of 0 consecutives --> 01-04-07-12-25-30
Example of 2 consecutives --> 01-02-07-12-25-30
Example of 3 consecutives --> 01-02-03-12-25-30
Example of 4 consecutives --> 01-02-03-04-25-30
Example of 5 consecutives --> 01-02-03-04-05-30
Example of 2 sets of consecutive s --> 01-02-07-12-25-26
BTW my numbers start on Cell G12 down..
______G12_______
01-02-03-20-21-25
I built an Excel Macro to pull information from my schedule and compile it within another Worksheet. The Macro below searches for an instance of "Unavailable" and then populates my Data Worksheet with the WeekDays (ie: M-W-F or ALL Week), the Details (ie: Vacation or Training) and the Name of the employee. I struggled with a way to populate my employee name as "unavailable" isn't always offset by the same amount of characters to employee name (as it is with WeekDays and Details). Instead, I collected the row in which "Unavailable" was found.
I used the Vlookup function to populate the number of Absences and it worked swell.
=VLOOKUP(C2,O:P,2,FALSE)
C2 is populated with Weekdays (ie: ALL week or M-W-F)
O contains a list of possible day combinations
P contains the number of days
I hoped to use a similar function to populate my employee names. This didn't work well a 'tall.
=VLOOKUP(A2,L:M,2,FALSE)....................
I basically need to grab all the numbers going down in a row and get them into one cell in Text format with a comma between them.
A1
5293
5294
5295
5296
5299
5300
5301
5302
5303
5304
5305
B1
What I need in Text format
5293,5294,5295……