I have to take a range of phone numbers that I have to port from another carrier and manually type them out or copy into another speadsheet, removing duplicate numbers. For example, I have the following numbers:
TSB..... in left column and NS...... in right column. This example includes 3 items as shown above but the single cell could contain more or less than 3 items
What I got going on is a program I use for reporting is shooting out information.. while most of the information it sends to an excel workbook is sectioned by cell, there is a good chunk of information that's dumped into 1 cell. Is there a macro, or something, I can do to separate the information in this single cell, into separate cells? Auto Merged Post Until 24 Hrs Passes;Here is an example of the report. You'll notice a bunch of information in the 'Description' section. What I want to be able to do is run a macro that will seperate the 'Item Number', 'URL', 'Serial Number', 'Model Number', and 'Details' information into seperate cells.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
how to read mutiple values from one cell. For example i want to have one cell for site visits, and there may be more than one. So i want to let the user enter more than one date seperated by a ",". Is there anyway of going about this?
I have a string of text in one cell on Sheet 1 (ie., A1, Sheet 1), here is a excerpt:
A-dec International Inc., A. Bellotti, A. DEPPELER S.A., etc ...
What I need to do is split the cell into separate rows, using the comma as a delimiter. I will be reading the cell from another sheet and need a formula that will provide me with
A1: A-dec International Inc. A2: A. Bellotti A3: A. DEPPELER S.A.
Part I... I got the answer 1987, and now I want Excel to take the numbers out and display... 1 in one box then i set + in the next, then 9 in the 3ed. box, next box +, then 8, then +, then 7 in the last so that i can have Excel make a SUM of it all to 25.
How do I split 1987 and put the numbers in different boxes?
Part II... I want to make A=1 B=2... all the way up to 9, then start over again with J=1 K=2... up to 9 again and then over again.
So that if I write my name it comes out as a value of 14 (Odd = O=6 D=4 D=4 =14)
(AJSØ=1 BKTÅ=2 CLU=3 DMV=4 ENW=5 FOX=6 GPY=7 HQZ=8 IRÆ=9, It's the Norwegian alphabet, that's why there are some extra letters)
So how do I set up my Excel so that is ANY name is typed in I can get it out into a number from the values assign?
I have a file which contains a list of all employees and the extra vacation time they have purchased by manager. I need to create a separate workbook for each manager saved as whatever is in the Manager Field, in a folder that I specify. I would like to have a VBA macro that does this.
No cells contain formulas, but I do need the formatting to be the same.
I have attached a small sample of the file that needs to be split. Since there are three managers in this file there should be three workbooks created.
I have problem with function, I have array with random numbers in cell G1 and columns with X in some of the cells, now I want to check the cells with numbers from cell G1 in column F to see is there X or not if yes count if not do nothing. In attached example result should be 3.
I am trying to write a macro that will select and copy all cells in a row that do not have a zero value.
The data I am trying to select will be contained in 12 cells in a single row, i.e cells A1:L1 and all zero values will always be on the right hand side of the first non-zero value in this row (going left to right), for example:
Row: A B C D E F G H I J K L (1) 0 0 0 0 1 1 2 2 2 2 2 2
What I want to do here is to select and copy cells E1 to L1, since they are the cells with non-zero values. This can vary, so here there are 8 cells with non-zero values but the next time there might be only 5 cell or all 12 cells, etc. I have a lot of data to sort like this so doing this manually takes a lot of time.
Once the macro has selected and copied the right cells, I will manually paste the data where I need to put it.
The big problem I am having is knowing how to firstly select the appropiate cells.
I have set up a spreadsheet template that automatically populates specific values through the spreadsheet based on what the value of cell "A1" is. I want to run through 224 potential values in cell A1 and print out the worksheet after each potential value.
My thought on how to approach it is to write a macro that: 1. Selects the next item from the drop down box in cell A1 2. Prints the page (using default print settings) 3. Loops
But I don't know what the code would be. Cell A1 also does not need to be a drop down box, as long as it incrementally runs through all 224 listed values and prints after each one.
As i am working on consolidating the Missing numbers manually, whether will it possible for making this automatic.
In Column "A" I have Multiple Duplicate Invoice Numbers and followed by the Different Transcation numbers in Column "B".
In Column "D" I have Each Invoice Numbers and in Column "E" Total Transaction Numbers i.e., no. of times each Invoice have Transactions.
In Column "F" No. of times we received the Transactions.
Here i need to manually need to update each Invoice's Missing Transaction number in Column "H" in single cell with comma separated to each Missing Transaction numbers.
I need find consecutive Numbers in a singles Cell but each numbers have a leading zero and "-" (Dash)
My problem is that the UDF that i found on this forum, is for numbers with out leading zero with comma ",",
So even if change the "," by "-", still getting a error Because the Code is designed to Read numbers Formats different than mine..
My Numbers are located in Cell G12 (down), and the message that i need to show in the cell result is :
If Found : 0 Consecutives --> 0 2 Consecutives --> 2 3 consecutives --> 3 4 consecutives --> 4 5 consecutives --> 5 2 Set of consecutives --> 2S
Example of 0 consecutives --> 01-04-07-12-25-30 Example of 2 consecutives --> 01-02-07-12-25-30 Example of 3 consecutives --> 01-02-03-12-25-30 Example of 4 consecutives --> 01-02-03-04-25-30 Example of 5 consecutives --> 01-02-03-04-05-30 Example of 2 sets of consecutive s --> 01-02-07-12-25-26
BTW my numbers start on Cell G12 down.. ______G12_______ 01-02-03-20-21-25
I built an Excel Macro to pull information from my schedule and compile it within another Worksheet. The Macro below searches for an instance of "Unavailable" and then populates my Data Worksheet with the WeekDays (ie: M-W-F or ALL Week), the Details (ie: Vacation or Training) and the Name of the employee. I struggled with a way to populate my employee name as "unavailable" isn't always offset by the same amount of characters to employee name (as it is with WeekDays and Details). Instead, I collected the row in which "Unavailable" was found.
I used the Vlookup function to populate the number of Absences and it worked swell.
=VLOOKUP(C2,O:P,2,FALSE)
C2 is populated with Weekdays (ie: ALL week or M-W-F) O contains a list of possible day combinations P contains the number of days
I hoped to use a similar function to populate my employee names. This didn't work well a 'tall.
I have 300 rows worth of data that looks similar to this, all organized in one column:
John Q. Smith Programmer 2111 NW 13th St Anywhereville, USA, 55555 (555) 555-5555 Joe P. Snider Organizer 5645 NW 45th St Anywhereville, USA, 55555 (555) 555-5555 Patty Williams Accountant 6454 NW 34th St Anywhereville, USA, 55555 (555) 555-5555
As you can see it is consistent with the name, position, address line 1, address line 2, Phone number, for every single entry. All my names are already alphabetized so I don't have to worry about it. What I want to do is have the information for each entry translated into 5 separate columns so it looks like this.
John Q. Smith Programmer 2111 NW 13th St Anywhereville, USA, 55555 (555) 555-5555 Joe P. Small Organizer 5645 NW 45th St Anywhereville, USA, 55555 (555) 555-5555 Patty Williams Accountant 6454 NW 34th St Anywhereville, USA, 55555 (555) 555-5555
Supposing I started the sheet in the top left corner at A1, I was just going to have cell B1=A1 then Cell B2=A6 then just autofill down column B but it doesn't work. I have seen some people do something similar to what I want with VBA but I am convinced there has to be something simple in with an excel formula seeing as my information is already so organized and consistent.
I'm a basic excel user really and cannot find a function that will allow me to complete the following:
CELL A1 includes the following sequence of numbers: 1,2,1,0,2,3 I would like to know how to put a formula/function into CELL B1 that sums up the sequence of numbers in CELL A1 (i.e 1+2+1+0+2+3)
At work, we've got a program that outputs the results of a search into an Excel file, in column 1 below.
17,43,61,63 17 43 61 63
23,29,53,57,77,79 23 29 53 57 77 79
17,29,63,69,71,75,79 17 29 63 69 71 75 79
11,43 11 43
57 57
I need to get that list of numbers listed out to the right, with one number per cell. The list in column one could possibly contain from 1 to 20 numbers, and the last number is always without the comma after it.
I have a list of user names and UIDs, all in one column. I'd like to split the numbers into a separate column. How can I do this? Here's an example:
A'Aross Hd 798027047
A'Yolanda Gallegos 100004367799914
Aaiky Sweet 100000984883871
Aarchie Alin 100000295447271
Aasusana Azanza 100000086329219
Ab Raf 100000223369007
Abigail Cadenas 100003769100097
Abigail Gopaul 100002988007633
Abod Rezk 100002010187332
Btw, I'm an Excel newb and don't know a lot. I did try Data/Text to Columns with a delimiter of spaces, but there's really no rhythm with the spaces so it splits it all whacky.
I have a column in one of my spreadsheets that I would like to split. There's currently not anything that can be used as a delimiter, nor can I use fixed width. the cells in question start with numbers and end with letters.
1.0 Develop Vision and Strategy 1.1 Define the business concept and long-term vision 1.1.1 Assess the external environment 1.1.1.1 Analyze and evaluate competition 1.1.1.2 Identify economic trends 1.1.1.3 Identify political and regulatory issues 1.1.1.4 Assess new technology innovations 1.1.1.5 Analyze demographics .... etc
I need to split this into two columns column A should contain 1.0 and column B should contain Develop Vision and Strategy . Ex: 1.1.1.2 Identify economic trends in column A then column B - 1.1.1.2 column C - Identify economic trends.
