Any way to find out what list boxes are on the active sheet with vba? I have a massive file loaded with listboxes, some copied from other sheets. I am trying to copy the selected value from to the worksheets themselves. I can pull the selected item from the Cell Link's Index or the bound item, but only if I specify the listbox. There are 57 sheets and up to 6 listboxes on a sheet, Do I have to go through and give them all individual names, such as the sheetname_listboxname.
I have two excel sheets, one loads up in Listbox1 and the other in Listbox2, i would like to be able to see if any entries in listbox2 match with entries in listbox1 and then to display the matches in listbox3 with a click of a command button. Is this possible? If so, how would i go about it?
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count) ActiveSheet.Name = Range("O4").Value ActiveSheet.Range("O4").Copy ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues End Sub
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
I have a workbook that I want to copy two separate ranges from and then post to two different sheets. Range one on the active sheet from A4:K(no of rows will vary) to sheet Savoury Year, and range two A64:K(no of rows will vary) to Site Services Year. When pasting I want to paste it to the next empty row down.
I want DELETE the rows that contains 0 (zero or -) in column F (SALDO BRUTO), when I click the Button (Clear). And How I can copy from this sheet to a new sheet in this workbook, but the names of new sheet automatic rename to next date or 2, and next when I click the Button "Copy to New Sheet".
I have a button on a sheet that runs a macro to unhide another sheet. That works, but I want the sheet made visible to remain forward. Instead, the button unhides the sheet and the sheet the button is on comes forward again. I am unable to figure how to keep the sheet made visible forward. Here is the macro 'as recorded'.
I am wanting to create a macro for excel that when run it it will copy the active worksheet and worksheet named "Timesheet" and copy them to a new Excel workbook named the same as the original file + "JobBrief".
I have a userform in my workbook with a button to access it on twenty different sheets in the workbook. Currently the userform will only populate the sheet titled "Blank1". How can I change it so it will populate the active sheet without naming it? So no matter what sheet I'm on when I hit the submit button the userform will populate only the sheet I selected the button on? See macro below.
Code: Private Sub OKButton_Click() Dim NextRow As Long Sheets("Blank1").Activate
I want to copy data from the current sheet, and past it in the "montly" sheet.
'i and j were defined above, with a Case statement Range(" Ai:Cj").Select Selection.Copy Sheets("monthly").Select ' I want the upper left cell of the pasted area to be A11 Range("A11").Select ActiveSheet.Paste
I get an error saying that I should select one cell and then paste. But I thought that that is what I did...
I have a userform with a listbox that has 6 columns (D2:I50) which works great. In column J (J2:J50), I have data which needs wrapping so I plan on putting it in its own listbox. Is it possible to have another list box but one that operates as the first one is scrolled?
When I select multiple values from the listbox, how do I apply the selected set of values (user can select up to 10 out of 80) to a range of cells in a different sheet (in the same workbook), which cannot contain any blank cells?
1. population a combobox in excel vba using code as opposed from a sheet 2. population a listboxin excel vba using code as opposed from a sheet 3. population a combobox in excel vba using text from a file as opposed from a sheet 4. Getting the values from a combobox on a form to populate cells on a worksheet
These list boxes and comboboxes will be on a form.
I have a listbox (form control) on an excel sheet, where the user can select (or deselect) multiple entries.
Is there a way to have vba spit out which options are selected? if I choose "single" for selection type, it will tell me which option i have selected. Is there something similar for multiple?
How to put these multiple listboxes in my form that allow the end-user to make selections and then after they are done, click the submit button that queries the results. I have read so many books and nothing in the books works.
I created a query that includes all the fields in each of the listboxes. For example :
[Code] ....
This way each listbox and there are 11, has distinct values based on my qual_main table and it connects to whatever the other table is that contains the actual values I need to pull. The listboxes display correctly yet when I put the query in my button to run it based on what the end-user selected from the listboxes, it does nothing. I have tried several things and the last code I tried is as follows:
I'm trying to make two multi select listboxes in excel. I have tried I myself, but I know the excistence of VBA only since one week .
In sheet1 I have a number i.e. 50 in "A1" . First I want to make a list of this number, so cell "A2" = 1, "A3" = 2, .... "A51" = 50. This range has to be variable since the number can be 1 but als 100.
Then I want to populate ListBox1 in sheet2 with the list from sheet1. Next I want a second ListBox (ListBox2) and two buttons ("Add item" and "remove items") to move items from ListBox1 to ListBox2 and back.
Finally i want the selection that is made in ListBox2 to be put in sheet1 in a specific column (let's say C) where "C1" is the first selected item from ListBox2 "C2" the second and so on. This range has to be variabel since the number of selected items is not known.
I have used a userform found on this forum (I cannot find the link) that displays row data from a range within a listbox. Unfortunately though you cannot determine the column width. As such I wondered if it was possible to show the data within other listboxes. So for example in listbox1 you can see 5 columns accross (from a range) however one of them is very wide.
Looking at Listbox1 you can only see the firsy 20 characters approximately in each column. Is it possible therefore that once this row of data is selected that the contents of the columns is duplicated in other listboxes on the same userform that can be expanded to accommodate larger text?
I am using a userform and i have added some data to listboxes but it comes as being too long when it is only one character. I checked in properties to change the settings and tried to change everything but it doesnt work.
I am trying to clear check boxes and list boxes on multiple worksheets within a workbook. Below is what I have,but doesn't work. Note: the "bottom " code does work to clear selected cells of their data. I tried to create a macro for the list boxes selecting "----" which I have as the last entry in the vlookup table but was totally unsuccessful at.
Sub cleardata() Dim Obj As OLEObject Dim ws As Worksheet
I am designing a userform that involves a listbox that I am having trouble with. Please note I have little experience with vba, so I don't understand most codes.
I want to make a mulitcolumn listbox, populated with the attached pivot table. I really do not know where to start, and there is no "populating multicolumn listboxes for beginners" instructions anywhere on google or in here. At least, none that I understand.
What I am trying to create is a 2-column listbox, where in the first column, the "code" fields are shown, and in the second column, the corresponding " Name" fields are shown. In the pivot table, you can see how several routes fall under a service, and several services fall under a pc, etc.
I have a spreadsheet that is nearly 100 worksheets. I am new to VBA and would like to put a button on each tab to return me to the last active sheet. I've tried other codes I've found on here but with no luck. I'm not sure if i'm posting them to the right area within VBA.
I am not sure why this code won't delete, I can't believe excel requires the sheet to be active to delete from. It will only work if the .activate line is included.
How can you delete from another worksheet without first switching to it?
