I have used a userform found on this forum (I cannot find the link) that displays row data from a range within a listbox. Unfortunately though you cannot determine the column width. As such I wondered if it was possible to show the data within other listboxes. So for example in listbox1 you can see 5 columns accross (from a range) however one of them is very wide.
Looking at Listbox1 you can only see the firsy 20 characters approximately in each column. Is it possible therefore that once this row of data is selected that the contents of the columns is duplicated in other listboxes on the same userform that can be expanded to accommodate larger text?
I am using a userform and i have added some data to listboxes but it comes as being too long when it is only one character. I checked in properties to change the settings and tried to change everything but it doesnt work.
I have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
i need to be able to fill a combo box on a userform with the data on sheet1 and when you select the item from the combobox it will populate the textbox below.
I have a userform with a listbox that has 6 columns (D2:I50) which works great. In column J (J2:J50), I have data which needs wrapping so I plan on putting it in its own listbox. Is it possible to have another list box but one that operates as the first one is scrolled?
When I select multiple values from the listbox, how do I apply the selected set of values (user can select up to 10 out of 80) to a range of cells in a different sheet (in the same workbook), which cannot contain any blank cells?
1. population a combobox in excel vba using code as opposed from a sheet 2. population a listboxin excel vba using code as opposed from a sheet 3. population a combobox in excel vba using text from a file as opposed from a sheet 4. Getting the values from a combobox on a form to populate cells on a worksheet
These list boxes and comboboxes will be on a form.
I have a listbox (form control) on an excel sheet, where the user can select (or deselect) multiple entries.
Is there a way to have vba spit out which options are selected? if I choose "single" for selection type, it will tell me which option i have selected. Is there something similar for multiple?
How to put these multiple listboxes in my form that allow the end-user to make selections and then after they are done, click the submit button that queries the results. I have read so many books and nothing in the books works.
I created a query that includes all the fields in each of the listboxes. For example :
[Code] ....
This way each listbox and there are 11, has distinct values based on my qual_main table and it connects to whatever the other table is that contains the actual values I need to pull. The listboxes display correctly yet when I put the query in my button to run it based on what the end-user selected from the listboxes, it does nothing. I have tried several things and the last code I tried is as follows:
I'm trying to make two multi select listboxes in excel. I have tried I myself, but I know the excistence of VBA only since one week .
In sheet1 I have a number i.e. 50 in "A1" . First I want to make a list of this number, so cell "A2" = 1, "A3" = 2, .... "A51" = 50. This range has to be variable since the number can be 1 but als 100.
Then I want to populate ListBox1 in sheet2 with the list from sheet1. Next I want a second ListBox (ListBox2) and two buttons ("Add item" and "remove items") to move items from ListBox1 to ListBox2 and back.
Finally i want the selection that is made in ListBox2 to be put in sheet1 in a specific column (let's say C) where "C1" is the first selected item from ListBox2 "C2" the second and so on. This range has to be variabel since the number of selected items is not known.
I have 2 different formulas that I need changed in a similar way.
The first formula is for cell AV11: =SUM(BI11,BP11,BW11,CD11,CK11,CR11,CY11,DF11,DM11,DT11,EA11)+10
Every cell starts off blank.
What I need is for cell AV11 to always start off blank until data is entered into one of the other cells. The problem is that since the sum always needs to be +10 only when data is entered in the other cells, I don't know how to keep 10 from showing in cell AV11 when no data is typed in the other cells.
The other formula is for cell CO39: =(CU8)+3
I pretty much need the same thing. If no data is entered in cell CU8, then I do not want cell CO39 to show the 3.
Any way to find out what list boxes are on the active sheet with vba? I have a massive file loaded with listboxes, some copied from other sheets. I am trying to copy the selected value from to the worksheets themselves. I can pull the selected item from the Cell Link's Index or the bound item, but only if I specify the listbox. There are 57 sheets and up to 6 listboxes on a sheet, Do I have to go through and give them all individual names, such as the sheetname_listboxname.
I have two excel sheets, one loads up in Listbox1 and the other in Listbox2, i would like to be able to see if any entries in listbox2 match with entries in listbox1 and then to display the matches in listbox3 with a click of a command button. Is this possible? If so, how would i go about it?
I am trying to clear check boxes and list boxes on multiple worksheets within a workbook. Below is what I have,but doesn't work. Note: the "bottom " code does work to clear selected cells of their data. I tried to create a macro for the list boxes selecting "----" which I have as the last entry in the vlookup table but was totally unsuccessful at.
Sub cleardata() Dim Obj As OLEObject Dim ws As Worksheet
I am designing a userform that involves a listbox that I am having trouble with. Please note I have little experience with vba, so I don't understand most codes.
I want to make a mulitcolumn listbox, populated with the attached pivot table. I really do not know where to start, and there is no "populating multicolumn listboxes for beginners" instructions anywhere on google or in here. At least, none that I understand.
What I am trying to create is a 2-column listbox, where in the first column, the "code" fields are shown, and in the second column, the corresponding " Name" fields are shown. In the pivot table, you can see how several routes fall under a service, and several services fall under a pc, etc.
I have a simple reporting sheet where the data for orders place is in one sheet and on the other sheet is an imput box for 'date' and it filters through and presents a table of data and two graphs for the date chosen.
I give a daily report (contents of this sheet) but I also need to leave this sheet available for anyone to open and change to another date.
I want to copy the repor sheet into a new one and email but I want the graphs to remain, not go blank when anyone changes the original sheet.
I have a bar chart that was made from table 1 which has the value in it. I have another table, table 2 that has the name corresponding to the value in table 1. I want to color data points in a bar chart with a different color for each name I have in table 2. I also want to give a data label in the data points with the value I have in table 2 instead of the original data label from table 1. Is it possible to do it?
How do I get the listboxes to pre-populate based on the Userid and Option Button selection? Furthermore, write back to the correct cell once the selection has been made?
How can I get the combobox to remove blanks in the Userid? (if each cell in row2 has to be populated then so be it)
I have a fairly straightforward UserForm with 4 listboxes and 4 option textboxes (the textboxes do not need to be a part of the validation I'm needing). I then have a command button that I want to be enabled ONLY if ANY of the 4 Listboxes have a selection. I've tried the "Change" event code below and it works upon the first selection of any listbox item.
However, if the user de-selects all selections in the listboxes (i.e. they are all unchecked), the command button remains enabled. I need the validation logic to enable/disable the button to persist as long as the user has the form open and if there is not a selection in ANY of the listboxes. The reason being is that if they click the command button it will update the cells in the worksheet, which if empty may overwrite previous work completed with blank cells.
Is there a way to use Data Validation that will pull data from a source list and also be able to type in additional data or just new data in same cell?
I would like to do is have 2 listboxes. In the first listbox I would like the name of all the worksheets which contain the words "elective class: " in cell C7.
In the second listbox I would like the name of all the worksheets which do not contain the words "elective class: " in C7. I need this only to source from worksheet 7 onwards however.
The listboxes are called ListBox1 and ListBox2 respectively.
Also I am using this to print and I have a button which currently selects all the data in the first listbox and another button which prints all the selected data. The code being used for this is:
I have a column line chart to which I add data monthly and then have to manually update the "source data" to reflect the added data on chart. This is a rolling graph, which mean that I have to remove data for one month(from last year) and then include the new month's data. Is there any way on automating this process...like a macro or something, so once I add the data excel automatically removes one month of old data and make changes to include fresh data. Eg Currently chart is based on data from A2:F2 and I add new data to cell G2. I need something which automatically update the source data to cell B2:G2.
If there is data in the cell then it is to be left. If there is no data in the cell then I would like to show the value 0.
I have tried using a circular reference, using the formula =IF(ISBLANK(B1),0,B1) and other similar formulas but they dont work as the formula overwrites the data in it.
I can still do a pivot report against the 'saved' data. So it must be out there in a file...? I read the function GETPIVOTDATA. Based on the description, It sounds like it would work to rebuild the source data. However the examples given don't see to match up with that. I have tried playing with the command, but I really don't know what I am doing and have had no luck
Does anyone know of a way to retrieve that stored data that the pivot reports are reporting against?
I used to get data from external excel, access files and today tried to put together query to get data from CSV file. While using same source file, I have creted several queries to get data out based on criteria. For some strange reason, same structure queries that did run with excel or access as data source, does not want to work the same way with CSV files.
Here is example of non working query SQL: SELECT Vendors.Vendor, Vendors.Name, Vendors.`Name 2` FROM `Q:FinanceRapporterPSAPRaw`Vendors.csv Vendors WHERE (Vendors.Name Like '%' & ? & '%')
If I enter "London" as a criteria input, it will not work. However, if I enter "ondon" it will find me all values records whre name contains London... Seems like I need to skip first symbol when entering criteria. This is, of course, not something I would like to do.
