List Files From Directory In Reverse Order
Aug 2, 2014How to List files from a folder down a column in reverse order?
View 3 RepliesHow to List files from a folder down a column in reverse order?
View 3 RepliesI have a question on paste special. Is there a way to paste special reverse the order of numbers?
I have data going in reverse chronilogical order vertically on my spreadsheet. So for example,
3/1/07 12.3 ( Cell A1)
2/1/07 13.2 (Cell A2)
1/1/07 14.5 (Cell A3)
12/1/06 16.7 (Cell A4)
I want to now paste this data vertically (so transpose which there is a handy check off box for) BUT ALSO to Reverse the data so vertically it now reads :
16.7 (in cell A1 for ex) 14.5 (In cell B1 for ex) 13.2 (In cell C1) 12.3 (In cell D1)
Is there a way to paste special reverse the order of numbers?
The script collects all the files in directory and sub-directories and list them in ascending format, I want them to get in transpose format. like for example: Root folder has many sub directories and in them a sub directory XYZ has 5 excel files, it will get the sub directory name in Col A and transpose all .xls files.
Col A | Col B________|Col C_________ |Col D___________|Col E________|
XYZ__|C:/root/test.xls|C:/root/Sales.xls |C:/root/Report.xls |C:/root/sam.xls|
[URL]
Hey is there any way to get a list of filenames into VBA from a specific directory?
for example all files in directory c:my documentsexcel?
Is it possible to get a list of files in a certain directory as a list stored in a spreadsheet?
View 5 Replies View RelatedI have created a spreadsheet with VBA code that lists the files in a directory. The code is as follows:
ListFiles = True
Set Sh = ThisWorkbook.Worksheets(sFileSheet)
lstAttr = vbNormal + vbReadOnly + vbHidden
lstAttr = lstAttr + vbSystem + vbDirectory
lstAttr = lstAttr + vbArchive
If sDirectory = "" Then
If iColumn = 1 Then
sPath = "C:PensionDataPensionPath" ' Set the path, must end with backslash
Else
sPath = "C:PensionDataWorkBench" ' Set the path, must end with backslash
End If
Else
If Right(sDirectory, 1) <> "" Then
sPath = sDirectory & ""
Else
sPath = sDirectory
End If
End If
sFileName = Dir(sPath, lstAttr) ' Retrieve the first entry.
lDataRow = 1
lRows = 1
This works on my PC and it works on other PCs. However, the one PC that it should and must work on, it does not. There is no file listing created.
I have duplicated the files and the folders on my PC and the files in the directories are listed. However, on that one PC, there is no file listing.
Is it possible to create a VBA script that will list the filenames of files in a set directory? I have about 100 directories, each containing 1000 files and they need to go into an excel spreadsheet (each file on a new row)so they can be audited... ;(
View 3 Replies View RelatedI wish to create a macro that looks in a specific directory "D:Records" . It finds the files which are modified after a date "January 01, 2012" in this directory (pdf files). Then it imports these files names into a worksheet.
View 8 Replies View RelatedIn my search I found several example similar to what I need, but nothing I could adapt to filt my needs, (at least not wim my limited skills).
Here what I need to do:
I have multilple Excel files in a directory. (M:/Archived PO Responses/Domestic). On a daily basis, these files are processed via VBA, and deleted after processing. What I need to do is, prior to processing and deleting these files, create an ongoing log of the filenames in that directory.
Example:
The macro would open an Excel file named "Processed Orders.xls", which is stored on the network drive "M:". It would then append all of the filenames in the directory mentioned above to a sheet named "Processed Orders" in that workbook, below any filenames that already exist.
I would like to list all files in a directory (display the full path) and make hyperlinks to all listed files at the same time.
I came accross the code below which works well for files in a directory:
Sub HyperlinksToDirectory()
' puts hyperlinks to each of the files in a directory of your choice
' into the active sheet starting at the active cell
Dim stDir As String
Dim stFile As String
Dim R As Range
Set R = ActiveCell
stDir = InputBox("Directory?", , Default:=CurDir())
stFile = Dir(stDir & "*.*")
Do Until stFile = ""
R.Hyperlinks.Add R, stDir & "" & stFile, , , stFile
Set R = R.Offset(1)
stFile = Dir()
Loop
R.CurrentRegion.Sort key1:=R, order1:=xlAscending, header:=xlNo
End Sub
I currently have a macro working where I can populate the A Column with files from a directory and based on its file extension, however I am having problems trying to populate the second (B) column with that files date modified. I have searched the forum to no avail and I must admit I not the best with vba.
Sub INP_files()
' searches within the file location
' C:Arenium_Projects31-1853012_Barnawartha BOSCADDMX
Dim rngOut As Range
Dim strPath As String
Dim strfile As String
' Sheets("INI_FILES").Select
I am trying to get the list of all files contained within a directory and have them displayed in a confirmation box, listed one beneath the other (as a column, each file name in a new row).
View 2 Replies View RelatedMy problem is to create a macro that will list all folders, subfolders and files in an order in excel. So that I know which folders and files belong to which main folder, more like a hierarchy.
For example,
Sourcefolder
Subfolder 1
File1
I have code that list all files in folders and subfolders, but it does not put them in a hierarchy fashion.
Okay, say I have a spreadsheet like this:
Cell1 Cell2 Cell3
Cell4 Cell5 Cell6
How do I make it:
Cell6 Cell5 Cell4
Cell3 Cell2 Cell1
I have a list like this
Dog
Elephant
Hippo
Cat
Morris Minor
Yak
Jaguar
+ about 300 others
I need to copy these and then paste then in another column in the reverse order. Is this possible ?
Is it possible to have a formula for cells B1 to B10 in order to reverse the order of cell A1:A10 as you can see below.
A
B
1
BO
RENT
2
BOS
WALL
[Code] .........
I have a column of cells which looks like this:
"JUMPING LAZY brown fox"
I need to put the non capitals in the front as so:
"brown fox JUMPING LAZY"
Can I reverse the order of values in a column or row? [ie] first cell goes to last cell, last cell goes to first cell, middle cell stays where it is, etc. [and if so, how?].
View 5 Replies View RelatedI have a user form and in my code I am using the Erow function
EROW = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
the form works fine and is loading the data to the spreadsheet and inserting it into the first empty row. I need to reverse the order of entry into the spreadsheet. So instead of the data from the form going into the first empty row down the spreadsheet, I need to insert the data in a common fixed row at the top of the sheet, every time and then shift the older data out of the row and down the sheet. Essentially putting the oldest data at the bottom and the newest at the top, which is reverse of the EROW entry process, Last row command would essentially do the same thing and I don't know what command would do what I want.
I have to sort data on 3 criteria
The data is:....
At this time I sort by HOURS then Seniority so the sort would look like this:........
Here is the problem, RN HILLER and JA DOE have the same hours and seniority. It is our policy that when 2 or more names and seniority match, they must be sorted by reverse order first letter of last name.
So this would be correct. H in Hiller comes before D in doe when reverse sorting.....
Any shortcut method to convert the row or column data in reverse order . for eg.
from A1 to F1 data is mentioned as 1,2,3,4,5,6 now i need the result from A2 to F2 is 6,5,4,3,2,1. and in another case data in A column from A1 to A6 like 1,2,3,4,5,6 and result needed in B column B1 to B6 is 6,5,4,3,2,1
Can countIF function be used in revers order,
Usually countif function work in following order:-
7
sddf
6
sddf
5
sddf
[code].....
But i want the order in the reverse format as shown below Without Sorting the data.
1
sddf
2
sddf
3
sddf
4
sddf
[code].....
Is there a way to select a series of rows and paste in reverse order.
i.e.,
1 3
2 2
3 1
(The contents of the rows is text and can't be sorted)
I'd like to take the value from one cel, and reverse the digit order in another cell. Example cell c11 value is 1234, I want to display that value in cell c12 as 4321. Is there a way to do this?
View 9 Replies View RelatedI have some code that scans each worksheet in a workbook for sheetnames beginning with 'Model'... if the worksheet name matches, it prints only the used pages on that sheet (see code below).
Dim Ws As Worksheet
For Each Ws In Worksheets
If Left(Ws.Name, 5) = "Model" Then
If Ws.Range("A46").Value = "Page 1-1" Then
Ws.PrintOut From:=1, To:=1
ElseIf Ws.Range("A46").Value = "Page 1-2" Then
Ws.PrintOut From:=1, To:=2
End If
End If
Next Ws
This code works... but I would like it to scan the workbook in reverse order...
ie. print from the last matching worksheet first.
How do I transpose the values in a column of cells (so the value in the topmost cell in the old column becomes the value in the bottommost cell in a new column)?
View 6 Replies View RelatedUsing Excel 2013. I have a pivot chart with date as the x-axis, 1 y-axis series on a Primary and 1 series on a secondary axis. My pivot table is sorted in descending order by date because I need the most recent date on top. To chart the date in order from left to right, I've turned on Categories in Reverse Order .
1. When hovering over the data points on the primary series, the date is reversed. Example: the data point Jan31 says Jan1.
2. The bigger problem is the series using the Secondary Axis is plotting Jan31-Jan1 instead of the Reverse Order .
Is this a problem with Excel or is there other options that I can try to correct all this?
I need to calculate a Sums of Products with unusual requirements. Please refer to the attached picture. The Orange Cells under "Noise Weight" are the Formula Cells. The Values in those Cells need to evaluate as shown in the equations below. I want this to be dynamic, so that if I expand the FM Region (Add Columns between "Noise Weight" and "FM15") AND expand the Severity Region (Add Rows between Severity and Noise Weight), I will not have to update Formulas manually. I know for sure that the standard SUMPRODUCT Function cannot handle this.
PRODUCT 1 = D29*E31 + D28*F31+D27*G31.....+D15*S31
PRODUCT 2 = D29*E32 + D28*F32+D27*G32.....+D15*S32
PRODUCT 3 = D29*E33 + D28*F33+D27*G33.....+D15*S33
...
....
PRODUCT 7 = D29*E37 + D28*F37+D27*G37.....+D15*S37
creating a formula to rank certain cells in reverse order.
Example
Cell Total Rank
B1 = 2456 3
B15 = 2369 2
B30 = 2547 5
B45 = 2141 1
B60 = 2471 4
Rank every 15 cells basically in reverse order.
I wrote the following routine to loop files in folder. I have 4 .xls files in my test folder. This code is only grabbing 1 then exiting. I have used the Dir() loop before with no problems.
Code:
Private Sub GetDataMultipleFiles(ByVal importExt As String, ByVal xFileNum As Integer, ByVal importLoc As String)
Dim Sep As String, myFile As String
Sep = Application.PathSeparator
myFile = Dir(importLoc & Sep & "*" & importExt & "*")
Do While Len(myFile) > 0
[Code] ..........