Scan Worksheets In Reverse Order?

Mar 24, 2007

I have some code that scans each worksheet in a workbook for sheetnames beginning with 'Model'... if the worksheet name matches, it prints only the used pages on that sheet (see code below).

Dim Ws As Worksheet
For Each Ws In Worksheets
If Left(Ws.Name, 5) = "Model" Then
If Ws.Range("A46").Value = "Page 1-1" Then
Ws.PrintOut From:=1, To:=1
ElseIf Ws.Range("A46").Value = "Page 1-2" Then
Ws.PrintOut From:=1, To:=2
End If
End If
Next Ws

This code works... but I would like it to scan the workbook in reverse order...
ie. print from the last matching worksheet first.

View 4 Replies


ADVERTISEMENT

Reverse Order Of Cells?

May 12, 2014

Okay, say I have a spreadsheet like this:

Cell1 Cell2 Cell3
Cell4 Cell5 Cell6

How do I make it:

Cell6 Cell5 Cell4
Cell3 Cell2 Cell1

View 1 Replies View Related

Paste In A Reverse Order

Sep 5, 2008

I have a list like this

Dog
Elephant
Hippo
Cat
Morris Minor
Yak
Jaguar
+ about 300 others

I need to copy these and then paste then in another column in the reverse order. Is this possible ?

View 2 Replies View Related

Reverse Order Of Cell

Oct 23, 2012

Is it possible to have a formula for cells B1 to B10 in order to reverse the order of cell A1:A10 as you can see below.

A
B

1
BO
RENT

2
BOS
WALL

[Code] .........

View 8 Replies View Related

CAPS/non Cap Reverse Order

Oct 10, 2008

I have a column of cells which looks like this:
"JUMPING LAZY brown fox"

I need to put the non capitals in the front as so:
"brown fox JUMPING LAZY"

View 9 Replies View Related

Reverse Order Of List

Oct 2, 2007

I have a question on paste special. Is there a way to paste special reverse the order of numbers?

I have data going in reverse chronilogical order vertically on my spreadsheet. So for example,

3/1/07 12.3 ( Cell A1)
2/1/07 13.2 (Cell A2)
1/1/07 14.5 (Cell A3)
12/1/06 16.7 (Cell A4)

I want to now paste this data vertically (so transpose which there is a handy check off box for) BUT ALSO to Reverse the data so vertically it now reads :

16.7 (in cell A1 for ex) 14.5 (In cell B1 for ex) 13.2 (In cell C1) 12.3 (In cell D1)

Is there a way to paste special reverse the order of numbers?

View 9 Replies View Related

Reverse The Order Of Values In A Column Or Row?

Mar 28, 2009

Can I reverse the order of values in a column or row? [ie] first cell goes to last cell, last cell goes to first cell, middle cell stays where it is, etc. [and if so, how?].

View 5 Replies View Related

Reverse The Order Of Entry Into The Spreadsheet?

Oct 4, 2013

I have a user form and in my code I am using the Erow function

EROW = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row

the form works fine and is loading the data to the spreadsheet and inserting it into the first empty row. I need to reverse the order of entry into the spreadsheet. So instead of the data from the form going into the first empty row down the spreadsheet, I need to insert the data in a common fixed row at the top of the sheet, every time and then shift the older data out of the row and down the sheet. Essentially putting the oldest data at the bottom and the newest at the top, which is reverse of the EROW entry process, Last row command would essentially do the same thing and I don't know what command would do what I want.

View 6 Replies View Related

Sort By Reverse Order First Letter Of Last Name

Oct 19, 2009

I have to sort data on 3 criteria

The data is:....

At this time I sort by HOURS then Seniority so the sort would look like this:........

Here is the problem, RN HILLER and JA DOE have the same hours and seniority. It is our policy that when 2 or more names and seniority match, they must be sorted by reverse order first letter of last name.

So this would be correct. H in Hiller comes before D in doe when reverse sorting.....

View 4 Replies View Related

Column Or Row Data In Reverse Order

Dec 30, 2011

Any shortcut method to convert the row or column data in reverse order . for eg.

from A1 to F1 data is mentioned as 1,2,3,4,5,6 now i need the result from A2 to F2 is 6,5,4,3,2,1. and in another case data in A column from A1 to A6 like 1,2,3,4,5,6 and result needed in B column B1 to B6 is 6,5,4,3,2,1

View 6 Replies View Related

ContIf Function In Reverse Order

Dec 21, 2012

Can countIF function be used in revers order,

Usually countif function work in following order:-

7
sddf

6
sddf

5
sddf

[code].....

But i want the order in the reverse format as shown below Without Sorting the data.

1
sddf

2
sddf

3
sddf

4
sddf

[code].....

View 1 Replies View Related

Paste Rows In Reverse Order

Aug 26, 2009

Is there a way to select a series of rows and paste in reverse order.
i.e.,

1 3
2 2
3 1

(The contents of the rows is text and can't be sorted)

View 9 Replies View Related

Reverse Number Order In A Cell

Oct 14, 2009

I'd like to take the value from one cel, and reverse the digit order in another cell. Example cell c11 value is 1234, I want to display that value in cell c12 as 4321. Is there a way to do this?

View 9 Replies View Related

Paste Column Values In Reverse Order

Apr 9, 2009

How do I transpose the values in a column of cells (so the value in the topmost cell in the old column becomes the value in the bottommost cell in a new column)?

View 6 Replies View Related

List Files From Directory In Reverse Order

Aug 2, 2014

How to List files from a folder down a column in reverse order?

View 3 Replies View Related

Excel 2013 :: Categories In Reverse Order

Oct 4, 2013

Using Excel 2013. I have a pivot chart with date as the x-axis, 1 y-axis series on a Primary and 1 series on a secondary axis. My pivot table is sorted in descending order by date because I need the most recent date on top. To chart the date in order from left to right, I've turned on Categories in Reverse Order .

1. When hovering over the data points on the primary series, the date is reversed. Example: the data point Jan31 says Jan1.
2. The bigger problem is the series using the Secondary Axis is plotting Jan31-Jan1 instead of the Reverse Order .

Is this a problem with Excel or is there other options that I can try to correct all this?

View 4 Replies View Related

Sum Of Products With Non Parallel Arrays With 1 Array In Reverse Order

May 31, 2014

I need to calculate a Sums of Products with unusual requirements. Please refer to the attached picture. The Orange Cells under "Noise Weight" are the Formula Cells. The Values in those Cells need to evaluate as shown in the equations below. I want this to be dynamic, so that if I expand the FM Region (Add Columns between "Noise Weight" and "FM15") AND expand the Severity Region (Add Rows between Severity and Noise Weight), I will not have to update Formulas manually. I know for sure that the standard SUMPRODUCT Function cannot handle this.

PRODUCT 1 = D29*E31 + D28*F31+D27*G31.....+D15*S31
PRODUCT 2 = D29*E32 + D28*F32+D27*G32.....+D15*S32
PRODUCT 3 = D29*E33 + D28*F33+D27*G33.....+D15*S33
...
....
PRODUCT 7 = D29*E37 + D28*F37+D27*G37.....+D15*S37

View 11 Replies View Related

Creating Formula To Rank Certain Cells In Reverse Order

Aug 23, 2012

creating a formula to rank certain cells in reverse order.

Example

Cell Total Rank
B1 = 2456 3
B15 = 2369 2
B30 = 2547 5
B45 = 2141 1
B60 = 2471 4

Rank every 15 cells basically in reverse order.

View 9 Replies View Related

Macro To Set The Order In Which Worksheets Should Be Printed (order Is Changing Daily)

Nov 29, 2008

I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:

I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?

Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...

Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).

Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.

View 9 Replies View Related

Loop Through Cells And Ranges Reverse Order With Backwards Loop

Aug 30, 2006

I am looping through each cell in a range and I would like to loop in reverse order.

Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next

I have tried:

For Each CELL In Range("C" & TotalRows, "C1")

and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.

View 7 Replies View Related

Adding Values Across Different Worksheets Not In Same Order?

Jan 29, 2014

Let's say I have 3 worksheets, the first of which being the total of the 2 other one, let's say total Apples, Red Apples, Green Apples.

The first column has the name of the customer, and the other columns afterwards have several other values such as sales in 2012, sales in 2013, year-to-date sales, growth etc...

I want people to be able to type in the name of the customer, then the sales for Red Apples, and the same in the worksheet for Green Apples, and then their total is shown in the Total Apples worksheet. The problem is that not all customers will buy both, and so overtime the cells will no longer be aligned to have one formula dragged across both worksheets.

Is there a way to get Excel to search the entries in both worksheets and compile them in the Total worksheet, summing entries that are under the same supplier name?

View 5 Replies View Related

VBA - Sort Worksheets In Same Order As List

Oct 7, 2011

I have the below code that sorts a list of Doors that I have in row C17 downwards. Door 54, Door 7, Door 109 etc. The list is feeding a drop down box, people find the door they were looking for, in the said drop down box.

Code:

Sub ListSorter()
Dim LastRow As Long
LastRow = Range("C" & Rows.Count).End(xlUp).row

[Code]....

I wondered if there was some code I could add to the end of this, that would the sort worksheets, which are all named after each cell in the list, in the same order.

View 3 Replies View Related

Sort Worksheets By Numerical Order

Oct 11, 2007

I am trying to sort worksheets in excel by numerical order. I have renamed each worksheet with a different zipcode that corresponds to data on that sheet.

I believe there might be two ways to do this,
1) by sorting numerically the worksheet names.
2) by perhaps referencing a cell on each worksheet (i.e. the zipcode) and sorting it that way.

View 7 Replies View Related

Order Worksheets Based On Integer Cell Value

Aug 9, 2012

I am trying to find a way to loop through all worksheets in a workbook and oder the worksheets based on the integer value in cell "Z1". When a new worksheet is created I have code in place to set cell "Z1" equal to the last value +1. I am now trying to find a way to sort the worksheets based on the value in "Z1" for each sheet. For example:

VB:
Sheet1.Range("Z1").value = 2
Sheet2.Range("Z1").value = 3
Sheet3.Range("Z1").value = 1

Each time a new sheet is created, I am looking for the tabs to be reordered by the Z1 value. In this example:

Sheet3, Sheet1, Sheet2

The users can edit tab names and will be deleting them on occassion so there may be holes in the numbering sequence.

View 3 Replies View Related

VBA To Sort Multiple Worksheets By Number Order

Feb 26, 2014

I found the code below on the Microsoft website and it works except it didn't treat the worksheet tabs as numbers so the sort is 1, 10, 100, 101 etc.

How can I get it to treat the worksheet values like numbers and sort accordingly?.

Code:

Sub Sort_Active_Book()
Dim i As Integer
Dim j As Integer
Dim iAnswer As VbMsgBoxResult
'
' Prompt the user as which direction they wish to
' sort the worksheets.
'

[Code]....

' If the answer is No, then sort in descending order.
'
ElseIf iAnswer = vbNo Then
If UCase$(Sheets(j).Name) < UCase$(Sheets(j + 1).Name) Then
Sheets(j).Move After:=Sheets(j + 1)
End If
End If
Next j
Next i
End Sub

View 1 Replies View Related

List Names In Alphabetical Order From Multiple Worksheets

Mar 3, 2007

I'm trying to get this formula to work across multiple worksheets. It suppose to list names in alphabetical order. I'm using these define names to get it to work. Also may I have another formula that list unique names in alphabetical order?

Col_A=T(INDIRECT("''"&XWSLST&"'!A"&(2+MOD(S,N))))
N=50
S=ROW(INDIRECT("1:"&(N*ROWS(WSLST))))-1
WSLST=Sheet6!$D$2:$D$5


=IF(ROWS($E$2:E2)<= COUNTIF(Col_A,"?*"),INDEX(Col_A,MATCH(LARGE(COUNTIF(Col_A,">"&Col_A),ROWS($E$2:E2))=S+1,COUNTIF(Col_A,">"&Col_A),0)),"")

View 9 Replies View Related

Order Form (worksheet) Populated Sequentially With Items Selected From Other Worksheets?

Feb 6, 2013

I have a workbook with a series of worksheets with stock lists and pricing that I would like a user to be able to select items on (say, with a checkbox) that would then automatically populate a separate master Order Form sheet. The Order Form sheet is currently blank, with headers, and I would like only those items selected on the various stock sheets to be displayed on the Order Form.

View 4 Replies View Related

Excel 2007 :: Copy Same Cells From Multiple Worksheets All Named In Ascending Numeric Order?

Jan 15, 2013

In Excel 2007, Windows 7 Home Premium, I am trying to summarise multiple worksheets into one sheet, creating a list in one column in this summary sheet that includes the cell contents from the same cell from each sheet. For example, my first sheet is called KCD183 and I want to list the value from KCD183 Cell A2 in my Summary Cell A2, then show KCD184 Cell A2 in Summary Cell A3 (i.e. the next row down). So my Summary sheet will list all cell A2s from all my sheets, 1 after the other down column A and will continue to add these for any new sheets I add.

I realise that I could just export the spreadsheet to Access and report on it from there, but I don't have the software!

View 4 Replies View Related

Reverse Data In A Cell / Reverse Cell Contents

Dec 18, 2009

I am trying to write a formula to reverse data in a cell. Basically I am converting a number to hex then I want to take that hex string and reverse it. So it would be something like this my original number is 400001001 my hex number would be 17D787E9 because I am only allowing it to show 8 characters. I want to reverse the 17D787E9 to read 9E787D71.

My question is: How can I reverse that cell? I have searched google and this forum and can't seem to figure it out. I am sure I could do it in VB but I don't know any VB code.

View 5 Replies View Related

Scan Through All Files And Subdirectories

Jan 5, 2009

I am trying to scan through all files within a directory and all subdirectories to find files where the name begins with certain characters. Below is code that will accomplish this for a certain directory, but I do not know how to look through the subdirectories within the specified directory. So, the issues are:

1. How do I loop through each subdirectory within a specified directory?

2. I am trying to return the file name, path name (separate from the file name), and modified date. I can return the name. I can return the path, but it includes the name. Is there a way to return just the path?

3. What is the code to return the modified date of the file?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved