the form works fine and is loading the data to the spreadsheet and inserting it into the first empty row. I need to reverse the order of entry into the spreadsheet. So instead of the data from the form going into the first empty row down the spreadsheet, I need to insert the data in a common fixed row at the top of the sheet, every time and then shift the older data out of the row and down the sheet. Essentially putting the oldest data at the bottom and the newest at the top, which is reverse of the EROW entry process, Last row command would essentially do the same thing and I don't know what command would do what I want.
I am building Food Stand Orders Record Table, which I would like to automate and reduce the data entry process as much as possible so that it will take as long to enter all 400 orders into the spreadsheet and mitigate errors and calculate totals. I am looking for ideas as to how to make this easier to update. Also, I am not set on the concept of the spreadsheet, if there is a better way to capture this data.
Below is a list of columns in my Order Record Spreadsheet: My spreadsheet start on A5. The Header row is A5:N5
No. = record input number Order # = The number of the order taken (i.e. 35306 – 11, 35306 – 12) Item = The Items sold from each order # Item Category = Was the item sold a special order or standard order Date = The date the items and orders were sold Time = The time the order was taken Quantity = how many of the item was sold for that order # Order Taker = record of who (order taker) took the order # Item Price = What is the price of one unit x the quantity of the item sold Total Order = What is the total cost of each item price associated with the same order # Cash Received = We only accept cash, what was the cash tendered with the order# Change = What is the change amount given to back to the customer associated with the order # Donation Received = Is the change amount, When customer associated with order# did not accept the Change. Notes = special notes related to the order#
I want to now paste this data vertically (so transpose which there is a handy check off box for) BUT ALSO to Reverse the data so vertically it now reads :
16.7 (in cell A1 for ex) 14.5 (In cell B1 for ex) 13.2 (In cell C1) 12.3 (In cell D1)
Is there a way to paste special reverse the order of numbers?
Can I reverse the order of values in a column or row? [ie] first cell goes to last cell, last cell goes to first cell, middle cell stays where it is, etc. [and if so, how?].
At this time I sort by HOURS then Seniority so the sort would look like this:........
Here is the problem, RN HILLER and JA DOE have the same hours and seniority. It is our policy that when 2 or more names and seniority match, they must be sorted by reverse order first letter of last name.
So this would be correct. H in Hiller comes before D in doe when reverse sorting.....
Any shortcut method to convert the row or column data in reverse order . for eg.
from A1 to F1 data is mentioned as 1,2,3,4,5,6 now i need the result from A2 to F2 is 6,5,4,3,2,1. and in another case data in A column from A1 to A6 like 1,2,3,4,5,6 and result needed in B column B1 to B6 is 6,5,4,3,2,1
I'd like to take the value from one cel, and reverse the digit order in another cell. Example cell c11 value is 1234, I want to display that value in cell c12 as 4321. Is there a way to do this?
I have some code that scans each worksheet in a workbook for sheetnames beginning with 'Model'... if the worksheet name matches, it prints only the used pages on that sheet (see code below).
Dim Ws As Worksheet For Each Ws In Worksheets If Left(Ws.Name, 5) = "Model" Then If Ws.Range("A46").Value = "Page 1-1" Then Ws.PrintOut From:=1, To:=1 ElseIf Ws.Range("A46").Value = "Page 1-2" Then Ws.PrintOut From:=1, To:=2 End If End If Next Ws
This code works... but I would like it to scan the workbook in reverse order... ie. print from the last matching worksheet first.
How do I transpose the values in a column of cells (so the value in the topmost cell in the old column becomes the value in the bottommost cell in a new column)?
Using Excel 2013. I have a pivot chart with date as the x-axis, 1 y-axis series on a Primary and 1 series on a secondary axis. My pivot table is sorted in descending order by date because I need the most recent date on top. To chart the date in order from left to right, I've turned on Categories in Reverse Order .
1. When hovering over the data points on the primary series, the date is reversed. Example: the data point Jan31 says Jan1. 2. The bigger problem is the series using the Secondary Axis is plotting Jan31-Jan1 instead of the Reverse Order .
Is this a problem with Excel or is there other options that I can try to correct all this?
I need to calculate a Sums of Products with unusual requirements. Please refer to the attached picture. The Orange Cells under "Noise Weight" are the Formula Cells. The Values in those Cells need to evaluate as shown in the equations below. I want this to be dynamic, so that if I expand the FM Region (Add Columns between "Noise Weight" and "FM15") AND expand the Severity Region (Add Rows between Severity and Noise Weight), I will not have to update Formulas manually. I know for sure that the standard SUMPRODUCT Function cannot handle this.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range Dim TotalRows As Long TotalRows = Cells(Rows.Count, 1).End(xlUp).Row For Each CELL In Range("C1", "C" & TotalRows) CELL.Select 'Code here to delete a row based on criteria Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
The overall picture is an order tracking sheet that has start times in column B, end times in column C, number of jobs in an order number in column D and the processing time in column A. On the Summary sheet I have dates listed for each workday.
Next to these dates I am wanting a formula that will traverse through column B of the Custom and Order Entry sheets and provide the number of orders and average processing time that match this. There can be multiple jobs per order number so it needs to order the Sumproduct by column D for each.
In Column B I have dates and in column C I have values correponding to the dates in B. In Column J I have dates and in column L I have values correponding to the dates in J.
The first date entry in column B and J are equal but after that it is different based on a workday formula adding months, years, days etc. etc.
B31 = 06-apr-09 and J31 = 06-apr-09 B32 = 06-apr-10 and J32 = 06-Oct-09 B33 = 06-apr-11 and J33 = 06-apr-10 B34 = 10-apr-12 and J34 = 06-Oct-10 B35 = 08-apr-13 and J35 = 06-apr-11 B36 = 07-apr-14 and J36 = 06-Oct-11 J37 = 10-apr-12 J38 = 08-Oct-12 J39 = 08-apr-13 J40 = 07-Oct-13 J41 = 07-apr-14
As may notice column B adds 1 year to the previous date while column J adds 6 months to the previous date. (This is changing and B can add 1 month while J adds 3 months etc. etc.
I need a formula in column N that will look at the dates in column B and in column J and list them in column N in ascending order while not taking into account double entries.
I found the following code which works fine until I start to select multiple cells in cell B for deletion etc. At this point it throws up a run-time error 13 type mismatch, which will cause problems when other people start to use the spreadsheet.
Private Sub Worksheet_Change(ByVal Target As Range) If Target.Column <> 2 Then Exit Sub If Target.Offset(0, -1) = "" Then Target.Select Application.EnableEvents = False Target = "" Application.EnableEvents = True MsgBox ("You must enter Atlas Part No. first") End If End Sub
I have an Excel VBA interface, with buttons and list boxes. I have been trying, with little joy to create the code to copy the content of the text box into a field on an Excel spreadsheet.
I have a large order spreadsheet with 3 date related columns. One for customer requested delivery date, one for factory quoted delivery date and one for actual delivery date.
I want to be able to set something up that if it gets near either the requested or quoted delivery date (by say a week), that the cell flags red so it's a visual reminder to check whether the order has been dispatched etc.
I've got a master spreadsheet grabbing data from 12-13 different tabs/spreadsheets.
One of those has a table, and I was wondering:
Is it possible for the master spreadsheet to automatically add a new line every time someone adds a new line and creates a new entry in a different spreadsheet?
In other words,
If there is a table in the master spreadsheet, and someone adds a new line, is there a formula which allows the master spreadsheet to add a new line in order to autopopulate?
I am currently producing a work number tracking spreadsheet for the people I work with and wanted to know if there was a way to generate a pop up window that created fields to enter the data for the job being inputted.
I currently have it just a simple macro (below) that enters a new line, adds a sequential number and adds both the date entered, as well as an expected finishing date. It does what I want it to do, however I am looking for it to be fool-proof as the last system was broken as people didn't fill it in fully.
Code: Sub New_Line() Range("A4").EntireRow.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromRightOrBelow Range("A4").Value = Range("A5").Value + 1 Range("C4").Value = Now() Range("D4").Value = DateSerial(Year(Now()), Month(Now()) + 1, Day(Now() - 10)) End Sub
On the previous system it used a worksheet that did similar, with dropdown menus that auto-filled the sheet as well as inputted into the spreadsheet. That was produced by an old employee that isn't working on it any more.
I am trying to create a spreadsheet that will automatically increase the work order number by 1. The cell will always be in the same place. The idea is that when the file is opened it populates the number. After being closed and reopened the number will be 1 higher than the previous.
The page will reused by various people to create and print work requests for my mechanics, I want it to assign the W/O automatically.
I have created a userform but just unsure how to format the code in order to get information to appear in a spreadsheet http://www.srfl.ca/userform.htm
