Any shortcut method to convert the row or column data in reverse order . for eg.
from A1 to F1 data is mentioned as 1,2,3,4,5,6 now i need the result from A2 to F2 is 6,5,4,3,2,1. and in another case data in A column from A1 to A6 like 1,2,3,4,5,6 and result needed in B column B1 to B6 is 6,5,4,3,2,1
Can I reverse the order of values in a column or row? [ie] first cell goes to last cell, last cell goes to first cell, middle cell stays where it is, etc. [and if so, how?].
View 5 Replies View RelatedHow do I transpose the values in a column of cells (so the value in the topmost cell in the old column becomes the value in the bottommost cell in a new column)?
View 6 Replies View RelatedOkay, say I have a spreadsheet like this:
Cell1 Cell2 Cell3
Cell4 Cell5 Cell6
How do I make it:
Cell6 Cell5 Cell4
Cell3 Cell2 Cell1
I have a list like this
Dog
Elephant
Hippo
Cat
Morris Minor
Yak
Jaguar
+ about 300 others
I need to copy these and then paste then in another column in the reverse order. Is this possible ?
Is it possible to have a formula for cells B1 to B10 in order to reverse the order of cell A1:A10 as you can see below.
A
B
1
BO
RENT
2
BOS
WALL
[Code] .........
I have a column of cells which looks like this:
"JUMPING LAZY brown fox"
I need to put the non capitals in the front as so:
"brown fox JUMPING LAZY"
I have a question on paste special. Is there a way to paste special reverse the order of numbers?
I have data going in reverse chronilogical order vertically on my spreadsheet. So for example,
3/1/07 12.3 ( Cell A1)
2/1/07 13.2 (Cell A2)
1/1/07 14.5 (Cell A3)
12/1/06 16.7 (Cell A4)
I want to now paste this data vertically (so transpose which there is a handy check off box for) BUT ALSO to Reverse the data so vertically it now reads :
16.7 (in cell A1 for ex) 14.5 (In cell B1 for ex) 13.2 (In cell C1) 12.3 (In cell D1)
Is there a way to paste special reverse the order of numbers?
I have a user form and in my code I am using the Erow function
EROW = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
the form works fine and is loading the data to the spreadsheet and inserting it into the first empty row. I need to reverse the order of entry into the spreadsheet. So instead of the data from the form going into the first empty row down the spreadsheet, I need to insert the data in a common fixed row at the top of the sheet, every time and then shift the older data out of the row and down the sheet. Essentially putting the oldest data at the bottom and the newest at the top, which is reverse of the EROW entry process, Last row command would essentially do the same thing and I don't know what command would do what I want.
I have to sort data on 3 criteria
The data is:....
At this time I sort by HOURS then Seniority so the sort would look like this:........
Here is the problem, RN HILLER and JA DOE have the same hours and seniority. It is our policy that when 2 or more names and seniority match, they must be sorted by reverse order first letter of last name.
So this would be correct. H in Hiller comes before D in doe when reverse sorting.....
Can countIF function be used in revers order,
Usually countif function work in following order:-
7
sddf
6
sddf
5
sddf
[code].....
But i want the order in the reverse format as shown below Without Sorting the data.
1
sddf
2
sddf
3
sddf
4
sddf
[code].....
Is there a way to select a series of rows and paste in reverse order.
i.e.,
1 3
2 2
3 1
(The contents of the rows is text and can't be sorted)
I'd like to take the value from one cel, and reverse the digit order in another cell. Example cell c11 value is 1234, I want to display that value in cell c12 as 4321. Is there a way to do this?
View 9 Replies View RelatedI have some code that scans each worksheet in a workbook for sheetnames beginning with 'Model'... if the worksheet name matches, it prints only the used pages on that sheet (see code below).
Dim Ws As Worksheet
For Each Ws In Worksheets
If Left(Ws.Name, 5) = "Model" Then
If Ws.Range("A46").Value = "Page 1-1" Then
Ws.PrintOut From:=1, To:=1
ElseIf Ws.Range("A46").Value = "Page 1-2" Then
Ws.PrintOut From:=1, To:=2
End If
End If
Next Ws
This code works... but I would like it to scan the workbook in reverse order...
ie. print from the last matching worksheet first.
How to List files from a folder down a column in reverse order?
View 3 Replies View RelatedUsing Excel 2013. I have a pivot chart with date as the x-axis, 1 y-axis series on a Primary and 1 series on a secondary axis. My pivot table is sorted in descending order by date because I need the most recent date on top. To chart the date in order from left to right, I've turned on Categories in Reverse Order .
1. When hovering over the data points on the primary series, the date is reversed. Example: the data point Jan31 says Jan1.
2. The bigger problem is the series using the Secondary Axis is plotting Jan31-Jan1 instead of the Reverse Order .
Is this a problem with Excel or is there other options that I can try to correct all this?
I need to calculate a Sums of Products with unusual requirements. Please refer to the attached picture. The Orange Cells under "Noise Weight" are the Formula Cells. The Values in those Cells need to evaluate as shown in the equations below. I want this to be dynamic, so that if I expand the FM Region (Add Columns between "Noise Weight" and "FM15") AND expand the Severity Region (Add Rows between Severity and Noise Weight), I will not have to update Formulas manually. I know for sure that the standard SUMPRODUCT Function cannot handle this.
PRODUCT 1 = D29*E31 + D28*F31+D27*G31.....+D15*S31
PRODUCT 2 = D29*E32 + D28*F32+D27*G32.....+D15*S32
PRODUCT 3 = D29*E33 + D28*F33+D27*G33.....+D15*S33
...
....
PRODUCT 7 = D29*E37 + D28*F37+D27*G37.....+D15*S37
creating a formula to rank certain cells in reverse order.
Example
Cell Total Rank
B1 = 2456 3
B15 = 2369 2
B30 = 2547 5
B45 = 2141 1
B60 = 2471 4
Rank every 15 cells basically in reverse order.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I am trying to write a formula to reverse data in a cell. Basically I am converting a number to hex then I want to take that hex string and reverse it. So it would be something like this my original number is 400001001 my hex number would be 17D787E9 because I am only allowing it to show 8 characters. I want to reverse the 17D787E9 to read 9E787D71.
My question is: How can I reverse that cell? I have searched google and this forum and can't seem to figure it out. I am sure I could do it in VB but I don't know any VB code.
I need a way to re-order an excel worksheets columns based on another worksheet.
Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.
How can i reorder the columns without physically having to cut and paste the columns to match?
I have attached a sample spreadsheet.
You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.
I am trying to bulk upload some geo locations for my site, but the data I have is longtude first and latitude after, whereas the site accepts the data reverse, which means latitude, longitude.
that it's possible to change the order somehow.
Here is a example of how it looks:
"(12.595342677449292 55.66937339270993, 12.595097670457731 55.669239938648126)"
Is there a way to reverse the order of data in a column - and maintain that same order but in reverse - so the last value in the column becomes the first, the second last value becomes the second, etc.
View 9 Replies View RelatedI am trying to sort a column of data in ascending order but I am not getting the results I expect. An example of the data held in the cells is:
4972-1A
4972-10A
4972-2A
4972-1B
4972-3C
When I sort it in ascending order it sorts like:
4972-10A
4972-1A
4972-1B
4972-2A
4972-3C......................
I have a macro built that sorts my data by column in descending order depending on what column of information is selected from the drop down menu.
However I need the macro to sort column F in ascending order, and continue to sort the other colulmns in descending order when selected.
I can't get my macro to switch the sort from descending to ascending order for this one column. Looking to see if this is possible, and if so what macro formula I would use.
Here is what the macro i am currently using:
Sub ddSort_Click()
Dim iDdSortVal As Integer
Dim CurrSheet As String
Dim lFirstSectionRow As Long
Dim lLastSectionRow As Long
Dim strCol As String
Dim lRptHeaderRow As Long
Dim iRptMeasColumn As Integer
CurrSheet = ActiveSheet.Name
[Code] .......
Im am looking for a way of automatically sorting the data I have in column "C" (C2:C99 to be exact).
The data represents stock codes which are a mix of text and numbers, starting with 1 letter followed by numbers.
I would prefer something I can put in the sheet tab view code section, so that when any new data is added or altered it automatically sorts the stock codes in to alphabetical then numerical order
EG:
A10
A11
B13
B15
etc....
I have a table with one column of data. The data in this column repeats with 4 relevant pieces of information that I want to put in 4 different columns (fields) in a different spread sheet (or the same would work better and I would just delete the first column when done) keeping the same order the data is now in.
The data currently repeats in a regular pattern (i.e. 123412341234 with no other data in between). I would like to do this with a macro. Could someone help write a macro that will do this
I want to get value from reference one column and return value by corresponding row from another column. This can be done by vlookup column. But it find value from 1st column and return value from given relative column. That mean find from Left column and return value from right side given column number.
But I want find from Given column number and return value from given left column. For Further detail see the Attached file.
I have a list of search words in column A and in column B is the products that address that particular search word and the products are separated by a comma in column B. Each product is listed multiple times under various search words.
What I am hoping to do is reverse this so that the product is listed in column A and the related search words are listed under that product in column B.
if data values are not input and are result of formula or macro can traverse back to see which macro is used to fill the data.
View 3 Replies View Related