I'd like to take the value from one cel, and reverse the digit order in another cell. Example cell c11 value is 1234, I want to display that value in cell c12 as 4321. Is there a way to do this?
View 9 RepliesIs it possible to have a formula for cells B1 to B10 in order to reverse the order of cell A1:A10 as you can see below.
A
B
1
BO
RENT
2
BOS
WALL
[Code] .........
Okay, say I have a spreadsheet like this:
Cell1 Cell2 Cell3
Cell4 Cell5 Cell6
How do I make it:
Cell6 Cell5 Cell4
Cell3 Cell2 Cell1
I have a list like this
Dog
Elephant
Hippo
Cat
Morris Minor
Yak
Jaguar
+ about 300 others
I need to copy these and then paste then in another column in the reverse order. Is this possible ?
I have a column of cells which looks like this:
"JUMPING LAZY brown fox"
I need to put the non capitals in the front as so:
"brown fox JUMPING LAZY"
I have a question on paste special. Is there a way to paste special reverse the order of numbers?
I have data going in reverse chronilogical order vertically on my spreadsheet. So for example,
3/1/07 12.3 ( Cell A1)
2/1/07 13.2 (Cell A2)
1/1/07 14.5 (Cell A3)
12/1/06 16.7 (Cell A4)
I want to now paste this data vertically (so transpose which there is a handy check off box for) BUT ALSO to Reverse the data so vertically it now reads :
16.7 (in cell A1 for ex) 14.5 (In cell B1 for ex) 13.2 (In cell C1) 12.3 (In cell D1)
Is there a way to paste special reverse the order of numbers?
Can I reverse the order of values in a column or row? [ie] first cell goes to last cell, last cell goes to first cell, middle cell stays where it is, etc. [and if so, how?].
View 5 Replies View RelatedI have a user form and in my code I am using the Erow function
EROW = Sheet1.Cells(Rows.Count, 1).End(xlUp).Offset(1, 0).Row
the form works fine and is loading the data to the spreadsheet and inserting it into the first empty row. I need to reverse the order of entry into the spreadsheet. So instead of the data from the form going into the first empty row down the spreadsheet, I need to insert the data in a common fixed row at the top of the sheet, every time and then shift the older data out of the row and down the sheet. Essentially putting the oldest data at the bottom and the newest at the top, which is reverse of the EROW entry process, Last row command would essentially do the same thing and I don't know what command would do what I want.
I have to sort data on 3 criteria
The data is:....
At this time I sort by HOURS then Seniority so the sort would look like this:........
Here is the problem, RN HILLER and JA DOE have the same hours and seniority. It is our policy that when 2 or more names and seniority match, they must be sorted by reverse order first letter of last name.
So this would be correct. H in Hiller comes before D in doe when reverse sorting.....
Any shortcut method to convert the row or column data in reverse order . for eg.
from A1 to F1 data is mentioned as 1,2,3,4,5,6 now i need the result from A2 to F2 is 6,5,4,3,2,1. and in another case data in A column from A1 to A6 like 1,2,3,4,5,6 and result needed in B column B1 to B6 is 6,5,4,3,2,1
Can countIF function be used in revers order,
Usually countif function work in following order:-
7
sddf
6
sddf
5
sddf
[code].....
But i want the order in the reverse format as shown below Without Sorting the data.
1
sddf
2
sddf
3
sddf
4
sddf
[code].....
Is there a way to select a series of rows and paste in reverse order.
i.e.,
1 3
2 2
3 1
(The contents of the rows is text and can't be sorted)
I have some code that scans each worksheet in a workbook for sheetnames beginning with 'Model'... if the worksheet name matches, it prints only the used pages on that sheet (see code below).
Dim Ws As Worksheet
For Each Ws In Worksheets
If Left(Ws.Name, 5) = "Model" Then
If Ws.Range("A46").Value = "Page 1-1" Then
Ws.PrintOut From:=1, To:=1
ElseIf Ws.Range("A46").Value = "Page 1-2" Then
Ws.PrintOut From:=1, To:=2
End If
End If
Next Ws
This code works... but I would like it to scan the workbook in reverse order...
ie. print from the last matching worksheet first.
How do I transpose the values in a column of cells (so the value in the topmost cell in the old column becomes the value in the bottommost cell in a new column)?
View 6 Replies View RelatedHow to List files from a folder down a column in reverse order?
View 3 Replies View RelatedUsing Excel 2013. I have a pivot chart with date as the x-axis, 1 y-axis series on a Primary and 1 series on a secondary axis. My pivot table is sorted in descending order by date because I need the most recent date on top. To chart the date in order from left to right, I've turned on Categories in Reverse Order .
1. When hovering over the data points on the primary series, the date is reversed. Example: the data point Jan31 says Jan1.
2. The bigger problem is the series using the Secondary Axis is plotting Jan31-Jan1 instead of the Reverse Order .
Is this a problem with Excel or is there other options that I can try to correct all this?
I need to calculate a Sums of Products with unusual requirements. Please refer to the attached picture. The Orange Cells under "Noise Weight" are the Formula Cells. The Values in those Cells need to evaluate as shown in the equations below. I want this to be dynamic, so that if I expand the FM Region (Add Columns between "Noise Weight" and "FM15") AND expand the Severity Region (Add Rows between Severity and Noise Weight), I will not have to update Formulas manually. I know for sure that the standard SUMPRODUCT Function cannot handle this.
PRODUCT 1 = D29*E31 + D28*F31+D27*G31.....+D15*S31
PRODUCT 2 = D29*E32 + D28*F32+D27*G32.....+D15*S32
PRODUCT 3 = D29*E33 + D28*F33+D27*G33.....+D15*S33
...
....
PRODUCT 7 = D29*E37 + D28*F37+D27*G37.....+D15*S37
creating a formula to rank certain cells in reverse order.
Example
Cell Total Rank
B1 = 2456 3
B15 = 2369 2
B30 = 2547 5
B45 = 2141 1
B60 = 2471 4
Rank every 15 cells basically in reverse order.
If I have the following text string in a cell "abc123.xyz" how do I reverse the contents i.e. "zyx.321cba"?
If the cell contains a numeric value e.g. 12345, then I want to know how to reverse it i.e. 54321
I am trying to write a formula to reverse data in a cell. Basically I am converting a number to hex then I want to take that hex string and reverse it. So it would be something like this my original number is 400001001 my hex number would be 17D787E9 because I am only allowing it to show 8 characters. I want to reverse the 17D787E9 to read 9E787D71.
My question is: How can I reverse that cell? I have searched google and this forum and can't seem to figure it out. I am sure I could do it in VB but I don't know any VB code.
I am looping through each cell in a range and I would like to loop in reverse order.
Dim CELL As range
Dim TotalRows As Long
TotalRows = Cells(Rows.Count, 1).End(xlUp).Row
For Each CELL In Range("C1", "C" & TotalRows)
CELL.Select
'Code here to delete a row based on criteria
Next
I have tried:
For Each CELL In Range("C" & TotalRows, "C1")
and it does not make a difference. I need to loop in reverse order since what I am doing in the loop is deleting a row. I am looking at a cell and determining its value. If the value is so much, then the row gets deleted. The problem is that the next row "moves up" one row (taking the pervious cell's address) and therefore the For Each Next loop thinks it has already looked at that row.
I need a macro to reverse a number in the cell, suppose a user inputs the number the 48596, after running the macro it should show the output in other cell as 69584.
View 6 Replies View RelatedI have a userform into which a user can enter a number. When they exit the TextBox the number that they entered must be formatted into the number format. eg 12345,67 -> 12.345,67 and -12345,67 -> (12.345,67). To do this is not the problem: formatnumber does the trick. What I am struggling with is to get VB to still recognise this as a number. I need the code that does the opposite of formatnumber. (12.345,67) -> -12345,67. I excell it works perfectly when you format a cell as custom: _(* #,##0.00_);_(* (#,##0.00);_(* "-"??_);_(@_). I want to be able to do the exact same thing in VB.
View 3 Replies View RelatedI am looking for a formula to number rows in A1:A500
I would like to skip a row when B1:B500 cells are empty
then skip that row and start renumbering from 1
This is what I tried so far
=If(b9>"", countif($B$9:$B9,">"""),"")
in cell a1 i have 34
i have a formula
INDEX($A$20:$A$40,MAX(IF($E$20:$G$40=a1,ROW($E$20:$G$40)))))
is there any way i can make this formula look for
34 and the reverse of itself which is 43 also
I have attached an Excel spreadsheet and I will apologize now if I lose you. This spreadsheet contains two entries:
"SwapIt" works great but will only reverse the most current date entry and list it first in the cell and the remaining date entries will remain in oldest to latest dates.
"ReverseDates" works great but errors out with <subscript out of range> when a manual date is entered in the notes (see system created format).
System created format; the entries within a cell will always be - MM/DD/YYYY_tt:tt:tt_AM(PM)_username (this varies) followed by the notes entered by user. So in a nutshell, the system will generate all the following but from oldest dates to latest dates toward the bottom of the cell. I would like to achieve the reverse order, latest entries to oldest entries.
I have specific need for text manipulating formula. Is it possible to reverse text in a cell, for example: microsoft excel to lecxe tfosorcim.
View 12 Replies View RelatedI have a large table with data to which I want to retrieve a name to the left of a certain cell.
Clear as mud so far!
I've put together a small example of what I'm after. In cell F9 is the MAX of cells F2:F7. In cell H3 I then want a formula that will find the MAX of F2:F7 and return the text five rows to the left of that cell. In this example it would be Fred.
The second part of this question is how could I get it to display if more than one person had the same total....
All of the information is provided in one cell, which I can not change. If possible I would like to pull the names from the middle only (example: cell d11 only give me Adam Diaz and so on). Once I have pulled out the name, I would to reverse the name (example: Diaz Adam).
d11=ADIAZ01 Adam Diaz (adam.diaz)
d12=AELIZO02 Alejos Elizondo (alejos.elizondo)
d13=BDELUN00 Bobby Deluna (bobby.deluna)
d14=BFOREM00 Bud Foreman (bud.foreman)
d15=BGREGG00 Billy Gregg (billy.gregg1)
d16=CGREEN06 Christopher Greenwood (christopher.greenwood)
d17=CGREEN08 Cheryl Green (cheryl.l.green)
d18=DDOWNS01 Dickie Downs (dickie.r.downs)
d19=DFLORE03 Daniel Flores (daniel.flores3)
d20=DMENDE01 Donald Mendez (donald.mendez)
d21=DMORAL01 David Morales (david.morales4)
d22=DRODRI07 Domingo Rodriguez (domingo.rodriguez)
d23=DWASHA00 Daniel Washa (daniel.washa)
d24=EBROOK02 Earl Brooks (earl.brooks1)
d25=ECARRE00 Edelmira Carreon (edelmira.carreon)
I am working with a column which always displays the cell contents with oldest notes by date first, then the newest note last. I would like to have the contents from a cell reversed with the newest user input by date on top which will simply when reading. Here is an example of a cell. The string always starts with (MM/DD/YYYY TT:TT:TT AM, then user name).
12/20/2007 8:27:56 AM MBARNEY Approval not required for this change request. 01/25/2008 10:27:32 AM KVELDANDA Change to Category, Type, Item, Region, Site, Department fields triggered an evaluation of whether or not the Change requires approval. Approval is not required.