I have created a file that has several worksheets with different naming convention - to specify what the sheets are for. However, as the sheets are added, I sometimes find it difficult to keep track of all the sheets that I have in the workbook.
Is there a Macro Code or formula that I can use so that a Summary worksheet can summarize all the names of the worksheets that I have in the particular workbook.
I have a workbook with 20+ sheets in it, I add sheets and delete sheets on a daily basis, except for one sheet that is like my summary sheet.
Is there a code, formula, or magic spell that will list the names of the sheets that I have deleted? For instance, if my workbook has 50 sheets and I delete 49 of them, I want to see cells A1 thru A49 (or where ever I wish to place them) filled with the names of the sheets I just deleted.
I have tried placing a hyperlink in a cell on sheet1 workbook1 to sheet1 of workbook 2 however it opens the workbook but does not take me to the correct worksheet stating: Reference is not valid.
Link is Abstractions.xls#Master for example
Is it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
I have a music folder on my computer with a TON of music in it. Some folders have sub-folders as well.
I need an easy way to point to a specific folder and pull ALL the names of the files within that folder and all of the sub-folders and put them on an Excel worksheet.
So a brief example...
Main Folder: Now That's What I Call Music
Sub-Folders: Volume 1, Volume 2, Volume 3, etc
And within each sub-folder is at least 2 more folders named CD1 and CD2.
I want to pull the name of every song in ALL of these folders into one collective list in Excel.
I have a workbook with a menu and 122 sheets holding detail for unique item (product model).
On the menu there is an index of the sheet names which was hand typed. However, the sheet names change as models evolve/get replaced.
I've written a small macro to put the sheet name in cell J1 of each sheet.
[Code] ......
On my menu page i was hoping to do something like this:
A B
Index NAME
2 =sheet[A2].$J$1
3 =sheet[A3].$J$1
That way i could just drag this down and my index list would complete itself and would dynamically update as sheet names change....
Within one workbook I have 15 sheets, 13 are for separate divisions within the company, 2 are used to present sums across the 13 sheets. All 13 sheets have identical columns and rows, with unique numbers in each cell. Right now I am manually selecting the cells to reference in my master sheet, =sheet name!cell+sheetname!cell+sheetname!cell - so and and so on. How can I reference the sheet name once, and then all of the cells to SUM? =sheetname!(c4+c14+c24+c34) etc?
This would let me be able to copy the formula from cell to cell, and only have to change the sheet name each time.
I'm about get code for list out the sheet names in current workbook, list would be displayed in a new sheet at the end.
View 3 Replies View RelatedI've created a macro that loads a listbox with the sheet names from another workbook. It works fine with Excel 2007-2010 but some reason fails with 2013. It doesn't crash, it just doesn't add items to the listbox nor doest it add the caption to Userform1.Caption. It does launch the form. Here is the code snippet:
Code:
'open read-only
wbkpath = Sheet3.Cells(1, "f") 'full pathway to source workbook
Workbooks.Open Filename:=wbkpath, ReadOnly:=True
Set swbk = ActiveWorkbook
swbk.Activate
[Code] ...........
I am attempting to use the code below to activate a sheet whose name is contained in a variable. The line in Bold gives me a "Subscript out of range" error even though the variables seam correct in the debugger.
Code:
Private Sub GetFromArchive_Click()
Dim wkb As Workbook
Dim strPath As String: strPath = "M:EfpDocsArchivesESI Processing Log Master Archive.xls"
Dim lngListItem As Long, lngSelected As Long
Dim varSheets() As String
[Code] .......
we log all customer communication on a daily spreadsheets a report. Multiple projects are listed on that one sheet every day. Is there a way to extract project related communication to a individual project log adding the date from the daily report to the log. The goal is to generate for each project a log will have the daily (or any) communication for one project from the daily report. either adding a work sheet via project name or a separate file. Also is there is a new project a new project log should be created.
View 4 Replies View RelatedI've been trying without success to hyperlink a shape in one workbook that refers to a website contained in a second workbook cell.
The hyperlinked shape is in the current workbook and the website address is in a workbook called "data source.xlsx", sheet 1, cell A1.
My last attempt was this - ('C:UsersLouiseDocumentsMA[data source.xlsx]Sheet1'!A1)
I have a workbook with two sheets. The first one, let's call it the Main sheet, will be used to keep track of the touring artists of a record label. The second sheet contains a list of show venues with their respective contact info. Here's what the two sheets look like :
Main sheet
mainsheet.jpg
List of contacts
listofcontacts.jpg
What I would like is row D of the Main sheet to autofill, according to the contact information contained in row B of the List of contacts, when I enter a venue name in row C of the Main Sheet.
I am creating an excel sheet where I have a list of names and dates to correspond with each of those names. Now, I have another sheet where I want an autopopulated list of those names and dates that are within a range of days since the original date.
For example, I own a company and I want to call back my customers 2 days from the first date, 10 days, 20 days, 30 days, 90 days, 120 days. I have a sheet where I have all my customer's information (Name, contact number, date joined the company etc.). Now, I on a separate sheet, when I enter the current date I want an autopopulated list of which customers I can call back within the 2-4 days, 10-12 days, 20-22 days, 30-32 days, 90-92 days, and 120-122 days.
Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedCode:
Sheets(Array("Sheet 1", "Sheet 2")).Visible = False
How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?
Want to ensure my code will work if the user changes the sheet name.
Two part question:
1) I'm relatively new to arrays, but what I need to do is generate a list of file names and the sheets within each one. I would like to use an array for this, but since I don't have much experience.... well....that's why I'm here. Can someone point me in the right direction?
2) And the second part of this.... I was planning on using the FileSystemObject to determine the files in a selected folder and loop through that list of files, opening each one and harvesting the required info (file name and all sheet names). Should I use the FSO or is there something built into Excel that might be better (and also limit the number of dependencies for this little "project" of mine).
I would like to hyperlink the names in sheet 1 to the same names in sheet two. Is there a way I could do this using a formula rather that do each one by one?
View 3 Replies View RelatedI've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
I am attaching the Excel for your reference.
I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
The two sheets are...
1. Sheet1.xlsx (regular excel sheet as the extension is .xlsx)
2. Consolidated.xlsm (macro enabled sheet as its extension is .xlsm)
1. Copy both the files on your system under a particular folder.
2. Now make 9 replica's of Sheet1.xlsx and name them as Sheet2, Sheet3, Sheet4, .......... Sheet10
3. Open the sheet Consolidated.xlsm and see the button i have added called "Pull Data".
Now write down the code by adding a Module in that excel sheet from the code window.
4. Write a code that will open each of these sheets (Sheet1, Sheet2, Sheet3, Sheet4, .......... so on) one at a time and will copy the data from these sheets to the Consolidated.xlsm sheet.
5. Make sure that the data is appended(and not overwritten) from the multiple sheets (Sheet1, Sheet2, Sheet3). that is once you paste the data from sheet1 to Consolidated.xlsm then the Sheet2 data will be pasted at the end and after that sheet3 data will be pasted and so on..
6. In this way at the end we will have all the data from Sheet1, Sheet2, Sheet3...in the consolidated sheet.
7. The Division column in the Consolidated sheet will have the value of first row in these multiple sheets. So after making the replicas of Sheet1, please change the value in first row (Range A1) to any other value to avoid the confusion.
8. I have highlighted the data for two sheets in yellow and grey color in the consolidated sheet.
Delete All Names in a workbook. Maybe delete names one time?
View 2 Replies View RelatedI have sheet 2007 with 365 named ranges. the names are like "_20070225". I use an intersect procedure that converts the range name into "Sunday, February 25" and places it nicely in a label on a user form. To name the ranges on sheet 2007, my procedure used DateSerial (2007,1,1). I named another sheet 2008, changed the naming procedure to use DateSerial (2008,1,1), and while it works, the intersect procedure throws an error for either sheet. I assume it has something to do with hidden names, or the fact that all names for both sheets are in workbook.names.
Here is the intersect procedure that I call from sub Worksheet_SelectionChange(ByVal Target As Range)
Sub cellINBMs()
Dim nName As Name, str As String
str = ""
For Each nName In ActiveWorkbook.Names
If Not Intersect(Selection, Range(nName)) Is Nothing Then
str = str & nName.Name & ";"
End If
Next nName
If Len(str) <= 1 Then
str = ""
Else: str = Left(str, Len(str) - 1)
MANAGERCONTROLSFORM.SELECTEDDAYLABEL.Caption = Format(DateSerial(Mid(str, 2, 4), Mid(str, 6, 2), Right(str, 2)), "dddd, mmmm d")
End If
End Sub
I have a userform, a textbox and a listbox.
I want to populate the listbox dependant on the worksheet names, skipping the first 4 worksheets The texbox should highlite a value in the listbox (if exists).
How to delete all defined names from a workbook
View 14 Replies View RelatedI have a workbook named Br2012. I would like a macro to copy the range names to BR12013.
View 2 Replies View RelatedI'm working to develop a method to programmatically identify the type of object contained in a UserForm, it's relevant property(s) & their current values.
Currently, I'm importing the relevant form into a new form module within the VBA Project. I'd like to be able to set the Workbook & Userform as variables within the code & do away with the import step. It appears the target workbook can be addressed by using the statement,
Set my_Workbook = CreateObject(Application. GetOpenFilename)
However I'm coming unstuck with the correct syntax to address UserForms in another workbook.
I am trying to implement this formula in my file: = SUMPRODUCT(SUMIF(INDIRECT("'"&$H$1:$H$20&"'!A1:A100"),"criteria1",INDIRECT("'"&$H$1:$H$20&"'!B1:B100"))). I have over 35 sheets in this file with different names. Is there a way to export all the sheet names in list format so that I don't have to go back and forth in the file and type the names?
View 2 Replies View RelatedI just started playing with creating my own macros. I've written a macro to pull all the names of the worksheets in a workbook, now what I want to do is write a piece of code that will pull data from a cell in those worksheets.
So for instance I have all my worksheet names in cell A1 to A10, I want to pull the data from cell E1 from every worksheet in A1 to A10. Can someone help me with a sample code to work with. I'm still reading Power Progamming haven't gotten so far yet.
Need a way to generate a list (i.e. array) of tabs available in the current spreadsheet?
View 3 Replies View Related
