Listing Columns Of Cells In Another Sheet That Are In Date Range That Specify?
Jan 9, 2013
I am creating an excel sheet where I have a list of names and dates to correspond with each of those names. Now, I have another sheet where I want an autopopulated list of those names and dates that are within a range of days since the original date.
For example, I own a company and I want to call back my customers 2 days from the first date, 10 days, 20 days, 30 days, 90 days, 120 days. I have a sheet where I have all my customer's information (Name, contact number, date joined the company etc.). Now, I on a separate sheet, when I enter the current date I want an autopopulated list of which customers I can call back within the 2-4 days, 10-12 days, 20-22 days, 30-32 days, 90-92 days, and 120-122 days.
Name........Cat....Dog....Fish....Mouse NY............Cat.....Dog....Fish.......... NY............Cat...............Fish....Mouse DC.....................Dog..............Mouse DC...............................Fish............ CA ...........Cat................................
I want to create a pivot table to do this:
Name.........Cat....Dog....Fish....Mouse NY...............2.......1.........2........1.. DC...............1......1..........1............ CA ...............1.............................
I have been unable to get it formatted correctly. The closest I get are "sub-colums" with counts.
I cant get this one off the ground. Normally I am pretty good to find bits and pieces of advice from other posts and put something together, but this one has me stuck from the get-go. I want to create several lists based upon the row(s) containing at least one set of criteria (day and time, contained in two differnt columns). Each row allows for up to 3 sets of days and times (i.e. columns B and C, columns D and E, and columns F and G) Each row is date and time stamped as to when the data was entered in that row (column H).
I want one list for each set of the various day/time combinations allowed in columns B thru G. The list should provide the name(s) contained in column A, in chronological order based on column H, when a criteria match is made in columns B:C, D:E, or F:G. This is far easier to understand with the attached sample. The lower section of the sample represents my desired output that I cannot seem to achieve.
I am try to show a list of all rows that have a missing date in column "B" and then show the corrasponding name in the next column "C". I can find the first one on the sheet and how many have missing dates using:
I'm sure this query has been answered somewhere else but I can't seem to find it. I basically have information in two worksheets in the same workbook which need to be compared and the missing values from one worksheet need to be listed in a message. There are duplicate values in both worksheets so only need a list of the unique missing values. For example:
Sheet1 Column A 1 2 1 5 5 2 3 5 4
Sheet2 Column A 2 3 3 4 3 4
The message box should state that we are missing 1 and 5 from the dataset as it is not in Sheet2. If the list could be sorted in ascending order that would be great too.
I have created a file that has several worksheets with different naming convention - to specify what the sheets are for. However, as the sheets are added, I sometimes find it difficult to keep track of all the sheets that I have in the workbook.
Is there a Macro Code or formula that I can use so that a Summary worksheet can summarize all the names of the worksheets that I have in the particular workbook.
Sheet 1 contains a column titled "name" and 6 columns to the right of name titled "sat", "sun", "mon"........ the col titled name is not the first col in the work sheet.
In each row I enter the guest name under the name col and I enter a room number (example: 1A, 1B, 2A, etc...) in the column to the right that coresponds with the day the guest will be staying.
Name Sat Sun Mon Tue Wed Thu Fri
Mr. Smith 1A 1A 1A 1A Mr. Jones 3B 3B 3B Ms. Tiller 4A 4A 4A 4A 4A 4A 4A
Sheet 2 is in the same workbook and looks something like this:
Room # Sat Sun Mon Tue Wed Thu Fri 1A 1B 2A 2B 3A 3B
I want it to look at sheet 1 and populate the date columns with the guest name from sheet 1
I tried this formula =IF('Sheet1'!G:G="1A",'Sheet1!$F:$F,"Available") It seems to work on the first row but I have problems with any rows below that. Basically it acts like there is no data in the rows below.... I think the fact that the names on sheet 1 are not alphabetical is creating part of my problem? I tried a lookup formula but it seems like it has to be the first column in the worksheet and it has to be alphabetical to work like that.
I have a workbook with 20+ sheets in it, I add sheets and delete sheets on a daily basis, except for one sheet that is like my summary sheet.
Is there a code, formula, or magic spell that will list the names of the sheets that I have deleted? For instance, if my workbook has 50 sheets and I delete 49 of them, I want to see cells A1 thru A49 (or where ever I wish to place them) filled with the names of the sheets I just deleted.
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date Dim projEndDate As Date Dim DateStart As Date[code]....
Let's say I have thousands of employees, but I need to determine who worked for me during a particular date range, and all I have to go on is their start date in one column and their end date in another column.
If:
A1 contains beginning date of employment B1 contains ending date of employment C1 contains specified beginning date (criteria) D1 contains specified ending date (criteria)
I have a list of items (TR Sets) from 1 to 96 in the range B4:B99, with values corresponding to each one (Acid Number) in the range C4:C99. I would like to make a separate list that names each TR Set (using numbers 1-96) that has an Acid Number > 0.1 . Is there a formula to do this?
I have a list of names in column B and either a 1 or 0 in column A as below:
0 A B 1 1 Bob 2 0 Chan 3 0 Lucy 4 1 Billy
On another worksheet I want to be able to list only the names with a 1 in column A. This must be done in another worksheet so I have something like below.
1 2 3 4 5 6 7 8 9 10 J Q K A (13 ranks of cards) s c d h (4 different suits...s=spades c = clubs,etc) 5 would be the number of draws of 1 card to make a poker hand
How would I go about listing the 2, 598, 960 different poker hands in separate cells?
I have a number I would like to find that is made up of a number of these cells. Lets say that number is 205, and as such the only possible values that could make that total are 1,100, and 104.
Is there a formula I can run that will allow me to find this number without manually figuring it out.
Hi. Does anyone know a formula to copy a selected range of cells on sheet one to a range on sheet three when a check box in checked. Ex. copy range a4:j4 on sheet one into a4:j4 on sheet three once the check box for on sheet one is checked?
I have a table showing accesssibility of given fruits in some particular shops. What I need is to list the fruits available in every shop right after the shop's name, but skipping any empty spaces (i.e. unavailable fruits. See the example, it's manually entered though).
I am trying to add a gantt chart feature to a project summary worksheet. Ideally I'd like to search Col C (Start date) and Col D (End date) for all projects, and based on the earliest start date (ESD) in C and latest end date (LED) in D, repeatedly insert columns labeled with the value of the ESD (ie Feb 6, 2011), increment by 7 (1 week), insert the next column with ESD+7 and continue on until reaching LED.
I have a spreadsheet with a number of sheets two of which contain tables with many columns with a date heading, I would like a means for the user to select a range of dates and for the spreadsheet to automatically hide any columns that don't fall within this range.
I have a sheet (sheet2) with up to 60000 rows of text. I want to compare column A and B on sheet2 to a range of text (B1:B50) on sheet1. If column A or B on sheet2 doesn't match any of the range of text on sheet1, I want to hide the row on sheet2.
I'm currently using VBA to import sheet2, but haven't gotten really anywhere with hiding the non matching rows.
I need some VBA code to hide columns if they are outside of a specified date range.
- the worksheet i need to run this VBA on is named 'Summary' - Columns A to G need to remain un-hidden at all times - from H17 to ZZ17 i have every month of the relevant years listed (all there chronologically) - D3 holds the 'Date From' variable - D4 holds the 'Date To' variable
I'm trying to create a summary sheet as a second sheet in an XL workbook. I need to pull data from another sheet in the workbook, but only from a date range entered on the second sheet.
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1() Dim r1 As Range, r2 As Range, myMultiAreaRange As Range Worksheets("Pre").Activate Set r1 = Range("J4") Set r2 = Range("K4") Set myMultiAreaRange = Union(r1, r2) myMultiAreaRange.Select Worksheets("Data").Select Range(r1, r2).Select Selection.Copy Sheets("1").Select Range("B5").Select ActiveSheet.Paste End Sub
Trying to incorporate the following in a worksheet: Lock the cells automatically in the columns that are older than 2 days or more Lock the cells corresponding to today and yesterday using a command button after entering X Copy the sheet multiple times with the same features
I'm trying to create a formula that will search for a specific text in "sheet1" within a date range and then SUM the total on "sheet2". I've manage to use the SUMPRODUCT (below) formula but want to expand on this so the SUM can be shown on another sheet(summary page). =SUMPRODUCT((ISNUMBER(FIND({"nmlclex06"},A1:A10)))*(B1:B10)) In this example I search for the text "nmlclex06" and SUM the size, but don't have a date range and don't know how to SUM the data on another sheet.
Can someone pls. assist me with obtaining an Excel or VBA solution for joining data from across a range of cells/columns into one cell? The single cell containing the intended output has to include the name of the source(s) that are noted on the header column and the price corresponding to each source but would exclude the sources which did not have pricing data. Example of logic is noted below:
Cells B1 - D1 contains names of pricing sources. Cells B2 - D2 contain prices from these pricing sources. Intended output: Cell E2 would have the names of all the pricing sources that had prices as well as their corresponding prices; but would exclude those that didn't.
Lastly, pls. see attached Excel file for format of data and intended output in Column E.
I've managed to write a macro to take data input into a column-oriented form and transpose it into the next available rows in 3 data sheets. In the blank workbook, you will find a functional data entry form with a "submit" button that transposes data from the first column of the form to the next available row in sheet "Data_R", data from the second column of the of the form to the next available row in sheet "Data_I", and the sum of both columns to the next available row in sheet "Data_C", clearing the form for further use.
Now, I need adding to the macro code that will sum data from the constituent columns of each multi-column category header (Marketing, Intake, etc.) in sheet "Data C", entering the sums under their respective single column headings in the next available row of sheet "Data_S".
I need to do this in order to use Defined Names (utilizing the OFFSET function) to create charts comparing the different categories that automatically update as new data is input via the form. I know how to do this, I just need the multi-column categories summed into single columns to make it work.
