VBA Code- To Pull All The Names Of The Worksheets In A Workbook
Apr 5, 2007
I just started playing with creating my own macros. I've written a macro to pull all the names of the worksheets in a workbook, now what I want to do is write a piece of code that will pull data from a cell in those worksheets.
So for instance I have all my worksheet names in cell A1 to A10, I want to pull the data from cell E1 from every worksheet in A1 to A10. Can someone help me with a sample code to work with. I'm still reading Power Progamming haven't gotten so far yet.
View 9 Replies
ADVERTISEMENT
Aug 11, 2007
My Thread title should have read covert code TO run on all worksheets with same word in Name. I have had a look at some other pieces of code in this forum but they are quite the same as I want to do....I have tried a few things but each time I get an error ...so for sure I am not modifying the code quite right, I ahve been missing something for what I now want it to do. So I wonder if someone could Please review these two pieces of code...they of course are both for running on just one worksheet in a wookbook.
I would like them both be able to run, still as tow separete pieces of code as they are, on all and only worksheets that have in their worksheet name a key word in this case the word "Region" and that those worksheets all in a single workbook but the workbook does have other worksheets in it I dont want the code to run one on - but those worksheets do not have in their worksheet name the word "Region".
Sub test()
Dim r As Range, txt As String, ws1 As Worksheet, i As Long
Set ws1 = Sheets(1)
With CreateObject("Scripting.Dictionary")
.CompareMode = vbTextCompare
For i = 16 To 21
Again:
For Each r In ws1.Range(ws1.Cells(6, i), ws1.Cells(Rows.Count, i).End(xlUp))
If r.Value <> "" Then
If Not .exists(r.Value) Then
.Add r.Value, Nothing
Else
txt = txt & "," & r.Address(0, 0)
If Len(txt) > 245 Then
ws1.Range(Mid$(txt, 2)).EntireRow.Delete
txt = "": .RemoveAll: Goto Again
End If .............
View 9 Replies
View Related
Feb 20, 2013
I'm about get code for list out the sheet names in current workbook, list would be displayed in a new sheet at the end.
View 3 Replies
View Related
Oct 8, 2008
code to sort all the worksheets in a workbook...
View 13 Replies
View Related
Nov 20, 2007
I recorded a macro in an Excel Workbook which contains 65 worksheets (--this is something received on a quarterly basis for which I have no control). The macro is successful within the workbook created however, a new quarter's data may or maynot have some of the referenced worksheets. 64.9 Waiv - 1 may exists and the others (2, 3, 4, etc) not. The macro fails and prompts for Debug if a worksheet does not exist.
Sheets("64.9 Waiv - 1").Select
Sheets("64.9 Waiv - 2").Select
Sheets("64.9 Waiv - 3").Select
Sheets("64.9 Waiv - 4").Select
Sheets("64.9 Waiv - 5").Select
Sheets("64.9 Waiv - 6").Select
Sheets("64.9 Waiv - 7").Select
Sheets("64.9 Waiv - 8").Select
Sheets("64.9 Waiv - 9").Select
Sheets("64.9 Waiv - 10").Select
Is it possible to alter the macro to look for and only invoke the code if a worksheet past 1 were to exist?
This is what I am requesting the macro do:
Sheets("64.9 Waiv - 1").Select
Range("B9").Select
ActiveWindow.FreezePanes = True
ActiveWindow.SmallScroll ToRight:=5
Range("J8").Select ...............
View 9 Replies
View Related
Aug 26, 2012
I wanted to know if there is any way possible to get vba to insert a formula in a cell to each worksheet in each workbook in a folder and then using loop to extract all the info from each worksheet of each workbook in same folder into a master workbook?
View 1 Replies
View Related
Feb 11, 2014
I'm looking to pull names from a database to a particular sheet based on what info is displayed in the database. I have six names listed in the database with a league type and position. I have three different tabs at the bottom for where the info is supposed to pull depending on the player type.
For example, I want all six players to pull to the 'Mixed' tab and populate the appropriate area based on their position. Next I'd like the 3 players with 'AL' for their league type to populate only on the AL tab and likewise for the players with 'NL' for the NL tab. Not only do I need the players to pull to the appropriate tab but i also want them to populate in the right position within that tab.
View 8 Replies
View Related
Oct 3, 2008
I have successfully loaded a combo box lookup in one cell referencing a column in another worksheet. While the drop down is pulling in all the names listed, there are duplicates in the data set. I want the drop down to only pull unique names. Is there a way I can do this and still use the combo box feature.
View 3 Replies
View Related
May 9, 2008
Essentially I have a sheet of names. This is just my master database. Other sheets get names from this sheet. The names are alphabetized. When I add a new name, the names are resorted on other sheets, but the data assocaiated with those names does not move.
Example:
Sheet1:
Jane Doe
John Doe
Add
Jimmy Doe
Therefore:..............
View 2 Replies
View Related
Oct 2, 2013
I have a spreadsheet with data of customer orders. I am looking for a way to pull the customers who have placed an order between January and August, but did NOT place an order in September (in order to reach out to those customers who have stopped ordering).
I can't post attachments for some reason, so this is a description of how the sheet looks.
Column:
A - Delivery Date (MM/DD/YYYY)
B - Month (MM) --> formula created to pull month from column A. For example 2/12/2013 returns "2"
C - First Name
D - Last Name
I need to find a way to create a list of customers, without duplicates, who placed an order previous to Sept, but not in Sept. So, pull unique names from column C and D that have an entry in column B of 1-8, but NOT 9.
View 3 Replies
View Related
Jun 4, 2014
I have a list of names in column A these names repeat themselves a lot and I don't know how many there are.
now I want to make a list of the names in column c starting at C2 that looks down row A finds names and puts them in column C one after the other.
View 3 Replies
View Related
Oct 15, 2013
Code:
Sheets(Array("Sheet 1", "Sheet 2")).Visible = False
How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?
Want to ensure my code will work if the user changes the sheet name.
View 2 Replies
View Related
Feb 27, 2014
I've been using the following code to bring in individual cell values from one closed workbook to an active one. I would like to modify this is possible to bring in multiple cells at once and also pull them into a different worksheet in the active workbook. Basically, my command button is on Sheet1 but I'd like the data to pull into a cell on Sheet2.
Private Sub CommandButton1_Click()
With Range("Q9")
.Formula = "='C:Users[Workbook Name.xlsm]Worksheet Name'! N27"
.Value = .Value
End With
View 6 Replies
View Related
Feb 25, 2011
Is it possible to produce a list on a new worksheet of all sheet names and their their internal names within a workbook?
If so I would like the tabbed name's to begin in say A2 with the corresponding internal name in B2.
View 3 Replies
View Related
Jan 21, 2010
I need to place a value in cell B on sheet 2 of a workbook. The value I need is stored in C10 on all other worksheets in the same workbook. The name of each worksheet is stored in Column A of sheet 2 (Rows 3 through 404). How do I get the value from C10 on each worksheet into the corresponding row on Sheet 2?
I have Excel for Auditors and there is code on page 201 but it is the reverse of what I need. I need to get the value from the worksheets as opposed to moving a value to the corresponding worksheet.
Example:
Sheet 2
Column A Row 1 = Worksheet name
Column B Row 1 = Need Cell C10 value from worksheet name referenced in A
View 9 Replies
View Related
Jun 3, 2014
How do I copy a Pull Down Menu from WS1 to all other Worksheets?
View 4 Replies
View Related
Nov 24, 2007
I want to open an excel file whose name is a value in a spreadsheet, and then pull a value from the spreadsheet I queried into my existing workbook. Here is the syntax i have so far:
to note: I'm calling the workbook in which the macro is located testproject.xls, and I'm using [integer].xls as my list of files that the macro will query. Ultimately, this code will go in a loop.
Set currentCell = Worksheets("Sheet1").Range("A1")
varCellvalue = currentCell.value
Workbooks.Open "path_of_file" & varCellvalue & ".xls"
Windows("testproject.xls").Activate
currentCell.Offset.(0,1).Select
ActiveCell.FormulaR1C1 = "=[3.xls]Sheet1!R1C1"
The problem is, I want [3.xls] to carry the sale value as varCellvalue with .xls appended, and not be kept static at 3. I tried inserting & varCellvalue & ".xls" into the brackets, but with no luck. My only difficulty is getting [3.xls] to vary along with varCellvalue.
View 6 Replies
View Related
Jul 10, 2014
I have a bunch of different worksheets that I need to pull a single cell from (lets say A1). On my summary sheet (first sheet) I have a list of all the worksheet names. Is there a macro that can pull data by referencing their names in the summary sheet.
Example: Column A has a list of all the worksheet names in my workbook. I want to extract cell A1 from each worksheet based off the name in Column A and be put into Column B. Otherwise, you would have to go through each tab and link it (I am working with 100+ tabs).
Column A Column B
PIN
CID
SIP
View 9 Replies
View Related
Oct 24, 2008
I need to be able to pull information from a "master database" into seperate worksheets. Here is my problem. When I use a vlookup and my identifer is say "office property" then the vlookup will only pull the first "office property" and not retrieve any of the remaining "office property" rows.
View 9 Replies
View Related
Mar 6, 2014
My query is;
I have 2 different worksheets having similar format (header rows/columns) but different data (values). I need to pull out these data based on their values, means if cell is blank leave that cell and move on, but if cell has some value then pull that value with its corresponding row & column headers to place into a simple table to further use it for PivotTable. The number of rows and columns are equal in both worksheets.
So basically, the proposed function will run a check on both worksheets within a specific range of cells for their values and if not blank, it will fetch that cell value along with its relevant row header and column header and place all these attributes into the destination worksheet.
Hope I am quite clear with my query. with the required function to ease my life?
View 4 Replies
View Related
Mar 14, 2009
I have on inventory sheet that has all the data in each cell 2612 to be exact! That changes month to month with deletions.
The format is: Sheet 2
A/B/
334702/UEMR88QX
334703/UEMR85QX
334704/UEMR81QX
334707/UEMR8JQX
The master worksheet has about 5000 items and the (A and B) data are both on it with other data ranging from (A-Y). My question is how do I have a cell look up data and return that it exists or doesn’t exist on the inventory sheet?
Master
A/B/C/D/E/
35/ 465/881676311350/311350/UEMR8ZTU
36/469/881676310722/310722/UEMR8V5V
37/483/881676310924/310924/UEMR8XYU
38/805/881676331096/331096/UEMR8J13
My other problem I need to take that months inventory list and have it look at the master list and return the system number from the master list (B) next to the matching inventory number (C). Allowing me to cross match inventory to master each month and save inventory worksheet each month.
I know I can copy the column and past is as a value so I won’t lose the numbers as the master changes but getting the data onto that months inventory has been a pain.
View 6 Replies
View Related
Jul 11, 2014
Attached is a master metrics deck, where data needs to be refreshed every week, from two different workbooks.
The catch is, the two parent workbooks would be new versions every week (data would be same format, and style within), but file name would change each week, for eg: for 1st workbook, 'XXX_Weekly_Week24.xlsx' to 'XXX_Weekly_Week25.xlsx' and so on.
for 2nd workbook, 'YYY_Weekly_Week24.xlsx' to 'YYY_Weekly_Week25.xlsx' and so on.
In the master metrics deck, a consolidated vew of some of data from workbook 1 and workbook 2 is presented for each week.
This master file would remain same, and only be refreshed each week (preferably with a button on its sheet "REFRESH!!")
Next, need to manually change cells C2:G2 each week to reflect week titles correctly.
For e.g.: week6 would show week 1 through week 5, but during week7, it needs to show week 2 to week 6. Only last five weeks of data any given time.
The first datarows of each set are conditionally formatted (they are compared with other rows in the set and need to reflect danger values, good values etc) (I have done that already).
View 1 Replies
View Related
Dec 6, 2013
I need to look up the name in E2 in the list in column A and if it matches then lookup name in F2 in list column b, if it matches then the corresponding number in column C is displayed in column G. If neither names are in the 2 columns the words"Not on lists" is displayed in cell in column G.
The other problem is one name is spelled two different ways I want it to look for both spelling before moving on to looking up the second name.
I started with this formula but I'm getting #N/A or "not on list" when they are on the list. I'm using ranges prod_sum is columns AthruC, Last_name is range BthruC. =IF(AND(VLOOKUP(F4,prod_sum,3,0),VLOOKUP(I4,last_name,2,0)),"not on list")
View 6 Replies
View Related
Aug 10, 2009
I'm trying to perform the same process to all the worksheets in my workbook. This is the code I have now, but it will only apply to the single active worksheet:
View 2 Replies
View Related
Jan 29, 2014
I want to be able to identify an Excel workbook in a cell, then have another cell pull the value from a specific cell in that workbook.
In the sample attached, I want the formula in cell C4 to pull the value in cell D35 from the workbook identified in cell C3. When I click within the brackets [C3] it asks me to choose a file name from my Explorer file list. "='[other_workbook.xlsx]Audit Information'!D35. I don't want to do that and want it to choose the file listed in cell C3.
View 5 Replies
View Related
Jan 27, 2009
I'm trying to pull some statistics from a workbook I've been sent and am having some trouble working out how to achieve this.
I have a small interface that allows the user to choose a possible answer (drop-down menu) from a questionnaire (Yes, No, Maybe)(cell: C6). On the interface the user also picks the question they wish to see the stats for (cell: C5)
The data I have been sent has been set up with the questions along in row A, and the answers below in each column (the answers run across row A from column G - AH).
So, what I'm basically after is a formula that first looks up the question specified in C5 (I've used HLOOKUP to pull some other data), and then counts how many times the Yes, No or Maybe answers appears in the column where the question data is held.
View 4 Replies
View Related
Sep 27, 2007
I have a workbook I created that is full of macros, graphs, and formulas. Five of the tabs in the workbook are where I will be putting my data. This workbook will also be used by others that don't even know what a macro is or does so I need to make this as simple as possible. How I get my data:
I have a website on my intranet where I have to login and then I have five templates that I run. I can have the results given to me either in HTML or in an excel spreadsheet. The excel results are very basic. Heading for each column and the data below. I have the report generated with blank columns since my page the data will go on has formulas. Thus far I have been copying all rows starting with row2 and doing a paste special (values, skip blanks). I had a macro in my personal.xls file to do this for me but most users will not know how to import it so I need a resolution that will be saved in the WB I send out.
View 5 Replies
View Related
Feb 10, 2008
I have a folder that contains hundreds of excel workbooks. Each workbook has 20 or more sheets. All workbooks have the same look and design. All workbooks have macros that they use to function and the macro I want cannot interfere with their macros.
What I want to do is copy certain cell values (some numeric and some text) from several sheets from these workbooks and paste them into another workbook (a master workbook) that is essentially collecting these values into a table without having to open all these workbooks. For example, let’s say all of the workbooks are named with a numeric value starting with “one.xls” and that the sheets in these workbooks are named “a”, “b”, and so on. So, in the master workbook in cell “B2”, I want the name of the first workbook searched (“one.xls”); then in cell “C2”, I want the value from cell “J45” on sheet “b” of “one.xls”; in cell “D2”, the value from cell “B32” on sheet “b” of “one.xls”; in cell “E2”, the value from cell “K13” on sheet “e” of “one.xls”; in cell “F2”, the value from cell “R43” on sheet “k” of “one.xls”. The in cell “B3” of the master workbook, I want the same information as before except from “two.xls” instead of “one.xls”, and so on down to “three hundred.xls”.
View 4 Replies
View Related
Jan 27, 2009
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies
View Related
Jan 21, 2014
I have two worksheets...let's call them worksheet A and worksheet B. How can I get a list of people who are on worksheet A AND also on worksheet B? I would actually like those names on a separate worksheet.
View 6 Replies
View Related
