I have a list of data that is currently separated into 5 different columns with a heading. Each item in the list is given a score 1, 2, 3, 4 or N, which is then placed into the appropriate column for that score.
What I want to do is to place the data in another sheet in the same workbook in a single column list separated by the labels from the columns in the first sheet, without any blank rows.
I am sure it would be easier if I could show you the spreadsheet and the result I want to achieve but I cannot see here how I can. I tried to copy and paste, but it only pasted as text.
Column A | Column B | Column C Los Angeles | Fire Dept | 3 Los Angeles | Health Services | 12 New York | Fire Dept | 8 New York | Health Services | 22 New York | Internal Services | 100 New York | Public Works | 7 Chicago | Health Services | 15 Chicago | Public Works | 56 Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept Health Services Internal Services Public Works Social Services
Sample file attached. How do I combine the data in columns B-E into column A? Obviously in my sample file you'd use a simple cut/paste but my actual file has hundreds of columns and rows so cut/paste isn't an option. I need to move all the data into column A.
I have an address in one cell in excel. Street/City/State/Zip are all separated by two spaces like this: 123 Anywhere St Chicago IL 60607 United States
I want to break them out into separate columns. The "Text to Columns" won't work because there are no commas or dashes separating the data.
I am trying to combine data from multiple columns into one column. The way my data is set up there shouldn't be any columns that have data in the same row. See below for my example.
I found this treat but it didn't help me as i hoped. Move Data From One Column To Multiple Columns. I try to convert multiple datablocks to a new worksheet and make the adress blocks ready for further sorting and removing actions. The Excel I use is Dutch and i hope that i make my question clear. What I want:
copy each adressblock to another worksheet, put the initals as well as the beginning in a seperate column and delete the unnecessary comma's. Each adressblock is identified by a number in colom A. When a new number is shown, excel has to start a new line to fill. finally,if possible i like to extract the adress line into seperate colums of "street+numer", zip and place. Some adresblock have more than onder adres, if possible i want excel to ad these information in the 'extra' colums.
I am trying to move information that is pulled from a database to look cleaner and easier to read. All of the information exports out into column A only. The attachment is a brief example of what it looks like, and what I’m trying to get it to look like.
I want to move the data in col A to 5 columns C through G in groups of 16 rows. Once the last column is filled with a group of 16, it needs to fill below the first group of 16 in column B onward to column F. It should repeat this process until there is no more data in A. The attachment shows it much better than i can explain it.
I have some basic experience with formulas and macros, but I haven’t had any luck trying to manipulate any of them to give me the information the way I have shown. I would prefer to not have to manually type or cut and past the information in if possible.
in moving data from multiple columns to a single column. I have attached a sample image from an excel file which details the requirement. The first column contains a qualifier, that should remain constant when the data from columns B to the end move to a single column "B". The number of columns for each row is different, however, there is a maximum number, say 25. As mentioned in the image, when the data from columns B to the end is moved in to column B, column A is retained fixed, to the original value, and the original data below it is pushed below. Any pointers to how this can be achieved by VBA or without VBA?
I have been trying multiple SUMIFS and SUMPRODUCT formulas to try and revamp my budget spreadsheet. My first criteria is the month being a certain number (contained in a column), if that condition is met it needs to look for the account number I am budgeting for (row heading) and if it matches both criteria I need it to sum the Column that has the row heading of the account number. I have succeeded in doing a SUMIFS and manually finding the column that has the heading of the account number I am looking for, but I would like this to be an automated process so I can copy the formula. Below is the data I'm using (a very, very small portion of it), and the results are how my budget sheet is going to look. These will be on separate tabs in the workbook.
EX: For July electric revenue (44211) I need my formula to: (if the Month column=7 & if the Account Code row heading=44211, sum the column that has the heading of 44211). So far I cannot get this to work.
I saw this thread from June Cut & Paste Macro: Move Address From Column To Row and I think this what I would like to have my macro do. I have one column which is copied and pasted as text in excel and there is several blank rows.
I attached the spreadsheet example - it has 40 lenders, with the top row being the lender name (A1), followed by address(A2), city-state (A3), two blank rows(A4-A5), lender type (A6), approved date (A7), one blank row (A8), lender specialty (A9), telephone (A10) , e-mail address(A11) and two blanks rows (A12-A13) and A14 starts over again. For this example there should be 8 columns and 40 rows (lender name, address, etc...). As I mentioned I think the previous thread's macro would work with some minor tweaks. I couldn't figure out the best way to handle the blank rows and or remove the blanks and what to add or take out of the macro code.
I'm trying to work out how to take all cells with data from multiple columns and stack them in a single column.
Here's the history...
I have multiple part numbers in single cells in column A. I perform a text-to-columns function. The resulting part numbers spread across multiple columns (say, B through K). Now I need to get all the part numbers, in their own cells, stacked in column A for one continuous list of single cell part numbers.
Is there a VBA option for cutting only the data cells from Column B-K and pasting the data at the bottom of column A while avioding blank cells?
I have a long list of data with many columns and I'd like all the information to be in one column without manually copying and pasting each column and adding to the first column. The data has different amounts of rows and columns as well. An Example is below. I'm using Excel 2010. Is there a formula or something for this? This isn't the data I'm using but just an example since I do this frequently.
I am using excel 2007. I have data which, instead of being posted on multiple columns, is all within 1 column. The data most simply has the characteristics of:
AAA AAA - description BBB BBB - description CCC CCC - description and so on..
I would like to move the descriptions from column A to column B: AAA AAA - description BBB BBB - description CCC CCC - description and so on...
What I am looking to do is this... (using Excel 2007)
I need to have more dependent lists based on the selection in Column A. (My column B is already set up and works perfectly using INDIRECT)
For example: Column F would be a dependent list of colors based on the sales rep chosen in Column A Column I would be a dependent list of managers based on the sales rep chosen in Column A Column M would be a dependent list of part numbers based on the rep chosen in column A
without using VBA? (If I HAD to - okay, the other person maintaining the sheet would be lost....) I haven't been able to find anything close to what I want to do online - maybe I am just not using the correct terms.
I have a range called List that has 3 columns of data:
Corporate Human Resources Services PMA Corporate Procurement Director Ops Central Customer Services Lost Property Office Ops Travel Information Travel Info Call Ctr Ops Travel Information Centres Travel Info Centres
I have 3 columns on the entry sheet called Business Unit (Col A), Department(Col B) and Sub-Department (Col C). I want to limit the choice in column B to based on the selection in Column A in the form of a drop-down list e.g choosing Corporate gives a list of Human Resources Services; Procurement.
I am using the list option for field validation and the following formula in cell B2: =INDIRECT(VLOOKUP(A2,List,2,0)). I'm not sure what I'm doing wrong as I don't get a list of options just a blank cell. Do I need to use a different formula other than VLOOKUP..?
My Table has a data validation list in one row of a table. And different formulas in different rows.
The Table is expanded only into columns. Which means, there will be no new rows...only columns will be added.
If we enter text into the header cell in a new column, the whole new column gets formatted, but the list and formulas do not auto fill into new columns.
Of course an easy way is to copy and paste a column...but is there a way to auto fill lists and formulas into columns of the table? Similar to how the rows get autofilled?
I am trying to compare multiple column in a worksheet to find common component in all the columns and what is unique to a particular column only. And list the results/finding in adj column. What i am trying to accomplish is something as below.
I've looked at the data validation tips and understand how to make a second dropdown dependent on the 1st, but how about a 3rd dependent on the prior 2 selections and so on.
I would like to have dropdowns based on a dataset of 4 columns (Location, Department, WorkGroup, Employee) that frequently gets updated. I would like to have the user select a location then a department then workgroup and employee. I would then fill in a worksheet with other pertinent information. I can get the 1st two dropdowns to work, but haven't found the key to being able to continue to drill down based on the 1st two options.
I cant seem to find the correct syntax for creating 14 validation lists using array members as the source of the named ranged. The validation lists are stored on a different worksheet, the Named Ranges are created fine, as are the ranges that are having the validation applied. The Syntax I am having a problem with is
Public Sub assignDVList(WSD As Worksheet, sListName As String) Dim DVListName As String DVListName = "DV" & sListName Application.Goto Reference:=sListName With Selection.Validation .Delete .Add Type:=xlValidateList, AlertStyle:=xlValidAlertStop, Operator:= _ xlBetween, Formula1:="=" & DVListName
It is the Formula1:="=" & DVListName that is creating the headache. The sub is called as the array moves through the columns, using the header row as the Name for the Named Range, and the data Validation worksheet uses the same naming except it has DV in front.
Want a single count of multiple columns based on the columns selected value. Data is in text format.
Have tried multiple COUNTIF statements and have tried using pivot table (Excel 2010) both only give me total counts for all. I think I need an OR statement somewhere, but not sure where?
In other words, if a single record has an "any" in the any fields or a "yes" in the yes fields, I want to to count that as one record.
I have column A and it has 1000 rows, every row has a number in it, from 5000 to 5200, meaning that some numbers are presented multiple times in column A.
I need to lose repetitions, so every number is in the the table only one time and then I need to convert this one long column into, for example, 9 columns, so there's no wasting of space and have only one column in every page, if printed out.
I have an excel workbook with 8 worksheets. Each worksheet has vertical columns (approx 250 columns per sheet) of numeric data. Is there a function or macro that will combine all of this data into one vertical column without having to individually cut and paste each one into the new column?
I need to consolidate these two lists of data into one list.
First set is just a basic list of individuals with their data.
Second set is multiple entries for those same individuals. Each entry shows a subscription to a programme. The final single sheet should have one row per individual which shows all of the programmes they are subscribed to.
See attached, example sheet.
The real list is 3000 IDs, so need some kind of formula to do this.
I am trying to write a macro that will take data from column A and use it as a column header in column C, and then take the corresponding data in column B and list it under the column header in column C. When the value in column A changes it will move on to column D and then list the corresponding data from column B underneath it in column D until all of the data in the 2 columns is spread across the worksheet. Example:..............
I have a large database of research data where the first column contains different categories (labelled as I, II, III, IV, V, and VI). For each row there is a data value in the second column that is numeric. What I need to do is move the data so that the data are displayed in 6 columns with the data values listed each column heading according to the category label. In the example I've shown there are 6 different categories, but the number of categories (and hence the number of columns in the final resulting sheet) will change for different data sets that I'm using. Also note the the number of cases for each different category is different (so that each column will not be even in terms of the number of rows of data under each column heading). I hope I've been able to explain what I'm looking for clearly.
I've attached a sample file showing the sample data input that I have on one sheet, and then the desired re-tablulated outcome on the second. I have done this using the auto-filter function and copy/paste, but this will take far too long for the larger datasets I'm working with.
I have lots of columns that need to be stacked into a single column Ex: put all data in column A,B, C, then below column D,E, F then below G,H,I Data in column A can be same as in column D or Column G All columns are in the one sheet.
I'm trying to combine multiple columns into 1 column in Excel. I've searched a few places but most of them are tailored for a specific sheet and my VBA skills are elementary
My table looks like this (there could be more than 5 columns... it's somewhat dynamic based on the data given). Note that some columns could have no data, and the size may be different, some have 100 rows of data, while others have 5.
Firm A Firm B Firm C Firm D Firm E
[Code]...
I want to combine these columns into
Consolidated
A B B C D E
[Code]...
Is it possible to do this with an Excel formula? If not, a VBA code
The spreadsheet contains over 21,000 rows of data, and one of the columns (D I think) contains data as in the two examples below.
What she wants is to split this column at the semi-colons ( and have the column header as the "field" name.
Unfortunately not all the cells have the same number of "fields" as you can see. Some don't have an "addressLineTwo" while others also have "stateprovince".
Is it possible to split the column so each "field" goes into it's own column?
Please note that if a "field" is missing there is not two semi-colons to indicate an empty field. I'm also fairly certain that, between them the two examples below show all possible fields.
Data Examples.
addressLineOne:Road Belen Staana;addressLineTwo:Costado Oeste;city:SAN ANTONIO DE BELEN;highRate:194;latitude:9.97631;longitude:-84.20038;postal4005
Didn't there used to be a "Split" function that split text over two cells? I'm sure I used it years ago, but can't find any mention of it in Excel 2003.
