Summing Data In Multiple Columns Using Both Row And Column Criteria
Mar 6, 2013
I have been trying multiple SUMIFS and SUMPRODUCT formulas to try and revamp my budget spreadsheet. My first criteria is the month being a certain number (contained in a column), if that condition is met it needs to look for the account number I am budgeting for (row heading) and if it matches both criteria I need it to sum the Column that has the row heading of the account number. I have succeeded in doing a SUMIFS and manually finding the column that has the heading of the account number I am looking for, but I would like this to be an automated process so I can copy the formula. Below is the data I'm using (a very, very small portion of it), and the results are how my budget sheet is going to look. These will be on separate tabs in the workbook.
EX: For July electric revenue (44211) I need my formula to: (if the Month column=7 & if the Account Code row heading=44211, sum the column that has the heading of 44211). So far I cannot get this to work.
DATA
Account Code
44211
44215
[Code]....
View 4 Replies
ADVERTISEMENT
May 14, 2013
I have a table that looks like the following, only it's actually much larger:
_Red Blue Green Blue
A 2 4 2 3
B 5 2 1 1
C 3 1 2 5
D 2 3 4 2
As an example, I'm trying to sum all cells that match Blue and C. The answer should be 6, but I always end up with either zero or #VALUE.
View 4 Replies
View Related
Feb 23, 2012
Excel 2007. I have an Excel file that contains a data dump from an external database file with numerous analytical sheets that perform calculations. Some of these calculations utilize the SUMIFs function that was introduced in Excel 2007. This function does an outstanding job of summing a column on the data sheet based on multiple criteria.
However, someone high up in management in my organization would like to "drill down" into the data behind the
SUMIFs formulas to get a quick snapshot of the lines in the database that roll into the
SUMIFs formula. =SUMIFS(DataBase!E:E,Data!A:A,C7,DataBase!B:B,D7,DataBase!C:C,E7,DataBase!D:D,F7)
If I double click on a cell with the formula above, Excel takes me to the Database tab and selects Column E which is close, but not exactly what I need. What I really need is for Excel to only show the rows on the database sheet that make up the total in the SUMIFs formula and not the entire data dump from the database.
At present, we have to manually apply the autofilter on multiple columns to show the rows in column E that make up the total in the SUMIFs formula which is a tedious and time consuming task. Is there a way to force Excel to do this? Suggested custom database application or pivot tables, but we do not want to reinvent the wheel.
View 2 Replies
View Related
May 14, 2014
I track distribution using 1 workbook for each sales rep. Each workbook has a separate worksheet (scorecard) for each of their locations showing which of our products are used in that location, for various functions. Each of the locations has a segment (bar, nightclub, casual dining, etc.), and a class (AA, A, B, etc.). All of the scorecards are identical, and are in the same file folder on our shared drive.
Sample:
Location A Class:AA Segment: Sports Bar Rep: John Smith
Product: Product X Product Y Product Z
Well: 1 0 0
Back Bar: 0 1 0
Cocktail Menu: 0 1 1
I was unable to find an HTML maker so this is not an actual sample but what I'm looking at. The above data indicates that for location A (Sports Bar, Class AA), Product X is used as the well, Product Y is on their back bar and their cocktail menu, and Product Z is not used at this location at all.
I need to set up an analytic workbook where I can sum data based on multiple and grouped criteria, and for multiple reps ie- display a scorecard that shows totals for nightclubs and sports bars, class AA, A, and B, for a particular rep; OR display a scorecard that shows totals for nightclubs, class A for a group of reps. Ideally I would like to do this using drop down menus that allow the user to select multiple criteria in each of the drop downs, having the data auto-populate based on those selections.
View 2 Replies
View Related
Sep 22, 2009
I have a table of data: - In cell A1: to C7
A B C#Group Aug-091Merchant Bar2002Plate3Structural - HR1004RHS5Plate3006Structural - HR300
What I would like is a formula that sums up column C if Column B of that row is "Plate" for example
View 12 Replies
View Related
Apr 30, 2012
I'm making a spreadsheet that tracks instances when something goes above or below a threshold. Anytime it goes below, a column populates with the number 1, and if it happens to go below a threshold on a Friday, a separate column populates with the number 2. If its doesnt go below, the column with 1 does not populate, however, every Friday populates with a two.
I need a column that adds the 1 and the 2 when the threshold is broken on a Friday, but only shows the 1 when the threshold is broken on a non friday and shows 0 when the threshold isn't broken, but happens to be a Friday.
View 1 Replies
View Related
Jul 31, 2006
I am having an excel problem such that i have several months in a given year and I want to set up a formula where I can enter a specific year and it will return the sum of all the cells that belong to that year (see attached sheet). So basically if I have 2 months in 2006, 2 in 2007 and 2 in 2008 with corresponding values for each of those months, I want to enter a year in another part of the sheet and a value is returned to me to show me the sum of the revenue for all the months that are in that year. So if I enter 2007, it will sum both those values that belong to 2007.
The years and months are dynamic so I can't just sum the columns because in column D it could be 2006 (depending on the other inputs of my spreadsheet) or it could be 2007, so I essentially need some formula that checks the array to see if that cell belongs in a year that matches the criteria and if it does sum it to all the values that match that criteria. I have tried using vlookup, match, index but can't get it to work.
View 2 Replies
View Related
Aug 27, 2009
Column A: Start Date
Column B: End Date
Column C: Ethnicity Code (letter and number such as B1)
Column D: Hours
What I need to do is work out how many hours each ethnic group did in a specific month.
View 14 Replies
View Related
Apr 23, 2009
I'm trying to sum a criteria of all M's in one column that are x's in a different column, throughout multiple worksheets.
I'm able to get the summary number for 1 worksheet using the below formula (*W1 is the worksheet name); however, how do i encapsulate all the worksheets (lets say W1 through W10), please note that some of the worksheets have different ranges (meaning, not all are from Row 2 to 6)
=SUMPRODUCT(--(INDIRECT("'W1'!C2:C6")="M"),--(INDIRECT("'W2'!D2:D6")="x"))
I tried to replace W1 with W1:W10.
View 9 Replies
View Related
Jul 1, 2013
Example data:
01/05/2013
150
Yes
01/06/2013
1
Yes
[code].....
Basically I'm trying to write a formula that will sum the total of the numbers from column B but only where the month equals June AND column 3 says "Yes".
So the answer would be 101, because rows 2 and 5 are the only rows of that table that meet all the criteria, and the sum of their column B cells would be 101.
I thought I was getting there with Sumproduct and Sumif but I'm now drawing a blank. There is a little extra complexity in that I'm actually pulling the month value from a set of cells elsewhere, but if someone can solve the puzzle above I hope I can do the rest on my own as it's just locations of data to pull from other worksheets really.
View 9 Replies
View Related
Nov 18, 2008
I am trying to review a cell range for a specific criteria, and then sum up another cell range if the criteria matches. Here are the formulas I have typed in - there are two columns I am trying to calculate using the same formula, they are next to each other:
=SUMIF('MASTER POINT SCHEDULE'!I2:I841,"0ACA101",'MASTER POINT SCHEDULE'!O2:O841)
=SUMIF('MASTER POINT SCHEDULE'!J2:J841,"0ACA101",'MASTER POINT SCHEDULE'!P2:P841)
View 9 Replies
View Related
Jan 22, 2010
I would like to sum G column (in my sample) that will meet a date criteria in C (like from 10/9/2009 to 11/9/2009) or similar. I tried it already with a formula =IF(c2=DATEVALUE("10/9/2009")=<("11/9/2009"),G2,0) could not make it work but its okay without the =<, or a single entry date (a sample in AB column), with this formula its being transferred to another column and being summed, what am trying to figure out is to make a formula or function that it can be incorporated in a sum at the bottom of G column if possible, I would be able to check how much cash collected in a week, days or month....
View 4 Replies
View Related
Jan 2, 2013
This formula allows me to find the lowest value in column U where column N contains the text "NO".
{=MIN(IF($N$2:$N$10000="NO",$U$2:$U$10000))}
I want to add another condition so that the formula only returns the lowest value in column U where (i) column N contains the text "NO" and also (ii) column F contains the text "YES".
View 11 Replies
View Related
Aug 5, 2008
I am in need of creating a User Defined Function in Excel that will sum numeric values based on two text criteria. I have a large set of data in an Excel worksheet that includes a column for " Market Type" and a column for "Location ID". I would like to develop a User Defined Function that allows a new or inexperienced user of the template to use the User Defined Function to select first a "Market Type" then select a "Location ID" and get the sum of the amount those values represent. A SUMPRODUCT function in Excel works for this, but can be awkward or intimidating for a new or inexperienced user. For that reason, I am specifically looking for a User Defined Function that will simply the formula for them while at the same time maintaining the degree of accuracy I need.
View 9 Replies
View Related
Jan 8, 2014
In the attached spreadsheet I would like to calculate the totals for pipe and valves by service & size (Columns A,B D & D) from the groups of paired columns Pipes & Valves under the headings of SD0-1, SD0-2, SD0-3 etc etc to LP-SD8 multiplied by the number of Service droppers (Highlighted in red) with the totals in columns G & H.
I can individually write a formula such as G7 = (I7*I4)+( K7*K4) etc etc, but is there a way to lookup up the data cells?
View 7 Replies
View Related
Jun 10, 2009
Imagine column A sorted by invoice numbers. Column B has payments applied but due to movement between unapplied cash, some numbers appear as negatives and positives for the same invoice number.
I want to have a formula which says that for each invoice number, look in column b and eliminate opposite numbers and post only unique values. Keep in mind that there may be multiple lines with the same invoice number.
For example, starting with line 5, for invoice 123, payments 400 and -400 in line 5 and 17 and payments 315 and -315 in lines 7 and 9 will zero out but any other unique payment will be picked up and displayed in column C. Lines 5 and/or 17 will be blank in column C.
View 9 Replies
View Related
Aug 13, 2012
Have a worksheet Pricelist, require to pull data from the columns to a new worksheet only if qty is more than 0, and delete empty rows afterwards. Required result is in worksheet order. Original file is about 10K rows.
Attached sample file : example.xls
View 3 Replies
View Related
Jun 30, 2014
I have a excelsheet that looks like this:
Column A | Column B | Column C
Los Angeles | Fire Dept | 3
Los Angeles | Health Services | 12
New York | Fire Dept | 8
New York | Health Services | 22
New York | Internal Services | 100
New York | Public Works | 7
Chicago | Health Services | 15
Chicago | Public Works | 56
Chicago | Social Services | 4
And I am trying to make it look like this:
Fire Dept
Health Services
Internal Services
Public Works
Social Services
Los Angeles
3
12
New York
8
22
100
7
Chicago
15
56
4
View 8 Replies
View Related
Jul 27, 2013
I am working on a project to automate the import of data and fixing the formatting.
The data contains the date in column A and time in column B. The time is in increments of 15 min for each day. The rest of the data is in columns C:F. Some of the dates don't have all of the times within the day (so instead of 96 rows of data per day, there maybe 80 rows). I have a second sheet of just dates and times that has the correct amount of rows for each day. What I need to do is have the rows data that matches in both the date and time column from sheet 1 copied over to the corresponding date and time on sheet 2. Blank data rows on sheet 2 are fine. I have found some stuff on .Find, but the stuff I found was for specific searches.
Example
Sheet 1
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 01:00 AM 9 10 11 12
Sheet 2
7/27/13 12:00 AM 1 2 3 4
7/27/13 12:15 AM 5 6 7 8
7/27/13 12:30 AM
7/27/13 12:45 AM
7/27/13 01:00 AM 9 10 11 12
View 1 Replies
View Related
Sep 22, 2006
I have 6 columns of data laid out as follows,
columnA columnB columnC columnD columnE columnF
XXXXXXXX XXXX XXXXXX XXXX XXXX XXXX XXXX XX
XXXXXXXX XXXX XXXXXX XXXX XXXX XXXX XXXX XX
I need to find data in columns B and C and add the figures from column F, which drop down one line. I have written the following formula which is giving me far higher figures than I should be getting
= SUMIF($B$2614:$B$2640,"bhree*",IF($C$2614:$C$2640,">=01/07/2006",( OFFSET($C$2614:$C$2640,1,3,1,1))))
View 9 Replies
View Related
May 30, 2007
I need to bring in values into one worksheet from another worksheet using row 1 and column A as criteria. I have previously done this using Sumproduct. However the complicated issue with this new worksheet is the setout. The source worksheet (see attached) has the actual data spread across columns. How can I bring in the values to the 'Summary' sheet from the '0607' sheet using the Employee number and the seg code as 2 criterias to lookup and bring in the resulting data (which is spread out in the purple area in the '0607' worksheet).
View 8 Replies
View Related
May 9, 2008
I have Master sheet where I collect info from sub sheets. All sheets are similarly formatted, ie. product numbers on column A and headers on row 2. I need to sum values from all sheets based product number and header. Master sheet includes all product numbers and some extra headers, sub sheets include only needed numbers. Headers on sub sheets are identical.
Currently I have this thing solved with following formula:
N48=sumproduct(sumif(indirect("'"&$B$378:$B$385&"'!A:A");A48;indirect("'"&$B$378:$B$385&"'!L:L")))
Where B378:B385 includes sheet names.
But problem with this is that column is hard coded, so I have to know that that value I am looking for is in column L. That wouldn't be show stopping problem on its own, but I have columns all the way to DR and copying formulas for each column takes a lot of time when I have to manually update each column. Just copying cell holds that L:L and doesn't change it.
So, in addition of getting values for specific product number I need to get values from specific column based on column header.
View 9 Replies
View Related
Jun 16, 2014
Any quick way to extract data from a table. I need to extract a value from a column that meets criteria from two different columns. I thought I could get this to work with vlookup, but have had no success. Sample data below in table 1 and I would like to get my data into table 2.
elevation
type
grade
percent
weight
5000
5000
5000
5020
[Code] ..........
View 9 Replies
View Related
Mar 9, 2009
I am working on a task analysis involving functions performed by different operators, each function marked by an "X" and totaled at the bottom of each operator column. I have seven sheets, named "Main Engine, Propulsion System, APU and ELEC.", etc. Columns B-F on each sheet are headed "C/M, Engr, Nav, LM, DE" respectively.
I need to add/total the bottom figure in each column (total of number of X's for each column) on a separate, final worksheet. Each of the worksheets contains a different number of functions, therefore the total of X's in each column is listed in a different cell# on each worksheet.
So this is my dilemma as the thread title states: I need to be able to sum/total the amount form different cell numbers (same column) across different worksheets into a cell in a separate, final worksheet.
I have figured out how to do this if the numbers are in the same cell across worksheets, but not varying cells by column.
View 9 Replies
View Related
Jul 15, 2014
I have single values in each cell in column A. I have 100 rows.
I want to take six rows at a time and get them to populate columns B, C, D, E, F, G.
Is there a simple formula for this?
View 2 Replies
View Related
Mar 6, 2013
sample1.xlsx
Sample file attached. How do I combine the data in columns B-E into column A? Obviously in my sample file you'd use a simple cut/paste but my actual file has hundreds of columns and rows so cut/paste isn't an option. I need to move all the data into column A.
View 4 Replies
View Related
Jan 26, 2012
I have an address in one cell in excel. Street/City/State/Zip are all separated by two spaces like this: 123 Anywhere St Chicago IL 60607 United States
I want to break them out into separate columns. The "Text to Columns" won't work because there are no commas or dashes separating the data.
View 3 Replies
View Related
Nov 15, 2013
I have a list of data that is currently separated into 5 different columns with a heading. Each item in the list is given a score 1, 2, 3, 4 or N, which is then placed into the appropriate column for that score.
What I want to do is to place the data in another sheet in the same workbook in a single column list separated by the labels from the columns in the first sheet, without any blank rows.
I am sure it would be easier if I could show you the spreadsheet and the result I want to achieve but I cannot see here how I can. I tried to copy and paste, but it only pasted as text.
View 9 Replies
View Related
Mar 17, 2014
I am trying to combine data from multiple columns into one column. The way my data is set up there shouldn't be any columns that have data in the same row. See below for my example.
[IMG][/IMG]
View 9 Replies
View Related
Sep 7, 2007
I found this treat but it didn't help me as i hoped. Move Data From One Column To Multiple Columns. I try to convert multiple datablocks to a new worksheet and make the adress blocks ready for further sorting and removing actions. The Excel I use is Dutch and i hope that i make my question clear. What I want:
copy each adressblock to another worksheet, put the initals as well as the beginning in a seperate column and delete the unnecessary comma's. Each adressblock is identified by a number in colom A. When a new number is shown, excel has to start a new line to fill. finally,if possible i like to extract the adress line into seperate colums of "street+numer", zip and place. Some adresblock have more than onder adres, if possible i want excel to ad these information in the 'extra' colums.
View 2 Replies
View Related
