I have the following macro that is supposed to find postcodes but it's not working correctly. I don't get an error message it just doesn't find any postcodes.
The postcodes are located on a sheet called "Postcodes" in A2-A2736.
If it finds the postcode it is supposed to return the contents of column B, E and F in a message box saying "B is your nearest branch. This is F miles away which should take E minutes to drive." B is the name of the branch, E is the drive time from the original postcode and F is the drive distance.
I have a row of cells with names. Alex, John, Martha, Jim, etc. Each person has a list of data under them. I have a master column of data. Depending who is on duty today, I want the macro to find the person and then copy paste special the master column over the person column.
Thus, in the macro code where it says
Find(What:="John",
I want it to refer to a specific cell. I.e. what:=$E$4.
Then it must go to the cell it found and copy paste the info in.
i want a macro to advance filter column A and make a unique list of it and then find the maximum value of each country in column A in 10 years. for example final table for country "CL" must be same this
provide me a macro to give a particular message or Cell Name when the cell is blank. I have to check around Eight columns and the starting row is A10. Moreover the sheet can have different numbers of row at different time like some time only 50 persons data will be there and some times 60 or 85 like this but the maximum will be 300. So if the 50 persons data is there than it should not warn about row 51 onwards.
I have two spreadsheets, spreadsheet A and B. In each spreadsheet there is a column labeled 'event' and a number in that column. I need to match the event number in spreadsheet A with the same number in spreadsheet B. In spreadsheet B in the same row as the event number is another value that I need copied back to spreadsheet A.
Manually I would have to copy the event number from spreadsheet A and use 'find' in spreadsheet B. Then check in the same row as the event number in spreadsheet B for a specific number, copy that, head back to spreadsheet A and paste it next to the event number.
I've tried to create a macro to do this but when using 'find' to match the event number in spreadsheet B it keeps on using the first event number I used instead of moving down a row onto the next number. I can upload the spreadsheet if needed.
I'm working on a project in which i had to calculate the average of particular field and that also with a macro in this application i had done that that's working supperb but i'm coming accross a problem according to which the range which i had to take average dosen't contains all integers
eg if range is A1:A10
then data is like
79 80 98 TBA 98 TBA TBA N/A N/A N/A
now ave for this range can't be calculated directly as many values are strings what i need is
using a avg function on this range where TBA(To Be Anounced) is to be treated as 0 and N/A(Not Applicable) as null value
pick a column to test in, this column should be one that will have #N/A error displayed in it and that 'goes as far down the sheet as you need to examine for the #N/A conditions although not all entries have to be #N/A just something in them to the end Using column E for this example as E was where I put a VLOOKUP() formula to test/generate #N/A errors. Const testColumn = "E" change as required 'no other changes to make
Sub DeleteNARows() Dim naRowList As String Dim anyRange As Range Dim anyCellEntry As Range Set anyRange = ActiveSheet.Range(testColumn & "1:" & _ ActiveSheet.Range(testColumn & _ Rows.Count).End(xlUp).Address) For Each anyCellEntry In anyRange If anyCellEntry.Text = "#N/A" Then naRowList = naRowList & anyCellEntry.Row & _....................
I am using the code below to copy data from a sheet that updates externally to copy to a database. For some reason it has quit finding the next empty row to paste data. It is currently over writing the data to row 61. any help advice or suggestions will be greatly appreciated, I am an armature if there is a better way please let me know.
I want to delete a row in a spreadsheet by finding the row that contains a particular value. I use MATCH on spreadsheet #1 to identify the row number on spreadsheet #2 to delete. I need the macro to select the row number on spreadsheet #2 and delete it.
I don't know the syntax for the commands in VBA to write this and I'm coming to this forum for help because I'm too lazy to learn VBA. I've recorded macros to add rows, populate cells, hide sheets, etc. The following code is extracted from a macro I recorded to try to get started, and was hoping to be able to substitue a reference to sheet1 within the parentheses at
Rows("4:4").Select
but I can't make this work. The following is the code I was trying to adapt.
Sheets("Sheet2").Select Rows("4:4").Select Selection.Delete Shift:=xlUp End Sub
I have a excel file with more then 10 sheets..Some of the sheets contains this word in some random cells" #DIV/0! " I want a macro which can find it in every sheet except parent sheet and can remove it.
What I want to do is place a lap time into 2 columns (representing each lap), then excel chooses the lowest number in the two columns on the same row, paste it into another column, and then automatically sort, while keeping the first column static for 1, 2, 3, 4, 5 etc
So what I want is
Column A | Column B | Column C | Column D | Column E 1 | Driver Name | 14.004 | 14.102 | 14.004
I want Column A to remain in tact, never changing, 1-50. I want Column E to hold the fastest lap time calculated from C and D. Then I want excel to automatically sort Column E from lowest to highest, while keeping Column B with a specific driver name in line with their respective lap times. Column A is not a 100% solid requirement, but auto sorting Column E after it's calculated the minimum value of C and D is.
This Macro is supposed to get certain totals for me from diffrent pages. Instead of selecting an entire row I want to select specific cells, so when it finds the word total on the sheet, whose location can change often it will return the value two cells away.
I am trying to write a Macro that will identify a particular column by its field header (i.e. first row) and will run a specific set of code on that particular column.
My current code looks like this, coverting New York to NY:-
This code applies to 'New York' found in the entire sheet. I need to identify a column that is named 'State' and then make the code run ONLY on that column.
I have a step in a very long macro to populate a sheet (SheetMaster) with the course completion status based on another sheet (SourceData) in the same workbook.
On "SheetMaster" Col E starting with row 2, I want to look at whether a concatenated value of E1 + A2 is in Col G in "SourceData". The macro should run until it gets to a blank row in Col A.
Here is an example to help illustrate the logic:
E1 = Ethics101 A2 = 123456 A3 = 654321
If Col G in "SourceData" contains "Ethics101-123456", E2 = "Complete", if not "Incomplete"
If Col G in "SourceData" contains "Ethics101-654321", E3 = "Complete", if not "Incomplete"
...and so on until it gets to a blank row in Col A...
I have a large keyword list in a sheet called "AllKWs" In ColA from A3 downwards).
What I'd like to be able to do is this, which I'm sure will be complicated, but I will explain.
Say keyword phrase sheet has 25,000 rows of data (could be more/could be less). I click an assigned macro button. A pop up box appears. I type in a word or words I'd like some info on, so for example I type in a word or words like "car rent"
It then returns for me on a new sheet called "Multi Keywords" a lot of data on this sheet, which would hopefully be as follows:
All Row 1 will contain Column headings All row 2 will contain Total Counts (I'll explain in a minute this row)
So, all data to be returned from Row 3 downwards. OK, as to the data to be returned. All returned data In all Columns to show data in descending order by No of occurrances/appearances
Col A (From A 3 downwards) = The actual number of 2 word appearances (In this example that contain the words "car rent"
In Col B = All 2 word Phrases Containing ("In this example "Car Rent") (As a note, In this example, ColA (CellA3) could only show the number"1" and ColB (B3)could only show the phrase "Car Rent") once. (As there isn't no other possible combination).
In Col C =The actual number of 3 word appearances listed in descending order That contain the word "Car rent"
In Col D =All 3 word Phrases Containing "Car Rent"
In Col E =The actual number of 4 word appearances containing "Car Rent" listed in descending order
In Col F =All 4 word Phrases Containing "Car Rent"
In Col G =The actual number of 5 word appearances listed in descending order
Actually if anyone can crack this I really do take my hat of to them. OK,A few more points,
Cells B2,D2,F2,H2,J2,L2,N2,P2,R2, All contain the word "Total:" and if the macro can fill in the number as appropriate.
So for example Cell L2 (For 7 word phrases) would say something like "Total:42" (If in Col L From L3 downwards the macro found 42 7 word phrases that contained the words "Car rent"
Ok, Cells A2,C2,E2,G2,I2,K2,M2,O2,Q2 All these cells will contain the word "Total". So these cells would list the combined total number of occurrances of all the phrases. So for example cell K2 might say "Occur:324" as the total number of occurances of 7 word phrases that had the words "Car rent"in.
OK. as an example, I will post a code that Jindon wrote for me sometime ago. I'm posting this now, as it is very similar in what I would like this macro to be able to do, and might help as I'm sure this 1 will be complicated. This 1 looks for a phrase, returns by No of occurrances etc, but for all the combinations (Word lengths) within the Keyword phrase list, rather than what I'm asking for now, which splits them into Number of words columns.
Here it is anyway:
Sub NicheKeywordFinder() Dim a, dic As Object, X, myTxt As String, b(), c(), n As Long, i As Long, e, s, myTotal As Long myTxt = InputBox("HuaHinCarRental - Niche Keyword Finder") 'change to suit If Len(myTxt) = 0 Then Exit Sub Set dic = CreateObject("Scripting.Dictionary") dic.CompareMode = vbTextCompare ReDim b(1 To Rows.Count, 1 To 1): ReDim c(1 To Rows.Count, 1 To 3) With Sheets("All KWs") 'change to suit a = .Range("a1", .Range("a" & Rows.Count).End(xlUp)).Value End With
I have this data...I need a macro which can find difference of timing between peaks of "act1" and "act2" and can adjust the act2 column such that their peaks are on same line.. For exampe here in data peaks of "act1" is at 13seconds and of "act2" is at 12seconds..so the difference is +1...I will insert 1 one cell in "Act2" from above which will shift down the column such that 60 in act1 and 30 in act2 will be in line...or for another example if 30 is below 60 ....>..if difference is -1 seconds or in minus it can delete the same number of cells from above in act2 coloumn(deletion of cells from the beginning which are under the title act2)..
I am facing problems with finding next instance of text using FindNext method. Kindly find code belowe which i have used.
Set srcCell = SourceBook.Worksheets(1).Columns("A").Find("Risk", After:= Sheets("SubArea"). Range("A21"), LookIn:=xlValues, lookat:=xlWhole) 'Set srcCell = SourceBook.Worksheets(1).Columns("A").FindNext Set firstsrccell = srcCell Do While Not (srcCell Is Nothing) tgtCell.Offset(tgtRow, 0) = srcCell.Offset(-1, 255) tgtCell.Offset(tgtRow, 1) = subAreaId tgtCell.Offset(tgtRow, 2) = srcCell.Offset(0, 1) tgtCell.Offset(tgtRow, 3) = srcCell.Offset(1, 1) tgtCell.Offset(tgtRow, 5) = srcCell.Offset(3, 1) tgtCell.Offset(tgtRow, 6) = srcCell.Offset(2, 1)
Set srcCell2 = SourceBook.Worksheets(1).Columns("A").FindNext ' If firstsrccell.Address = srcCell.Address Then ' Exit Do ' End If tgtRow = tgtRow + 1 Loop
I checked above code by putting breakpoint, but code is unable to find next instance where it matches the required string (FindNext reamains at the same position).
I have a very big Excel file (62 MB). I need to be able to filter by one column (FACILITY) and sort the whole file using the (REGISTRATION NO) column as well as finding the missing sequence number in the (REGISTRATION NO) column. The problem is that the (FACILITY) column has more than 200 different facility name. I am thinking of macro as I have different Spreadsheet I need to do the same steps in each one separately.
I have attached a copy (example from the data that I have) .
I have a form in excel (very simple) that I need to put on the web - People can then fill out certiain bits of the information and the idea is that they then click on the button to email it back to me. Ie complete it there and then and email it straight away so that they don't need to save it etc.
I can't for the life of me work out how to do this! I've managed to get the macro to open an email with the correct details on but not paste in the information so am at a complete loss and appear to be going round in circles!
I have been trying to write two formulas in one cell. I have been able to write them both separately but have been unable to join them both together. What I am trying to do if first search name them how many reoccurring numbers appear. I have provided an example below
a b c d
1 Tom 333 2 Sam 22 3 Sam 22 4 John 5 5 Sam 22 6 Sam 1 7 Tom 3 8 Tom 333
Basically, I'm doing a recorded macro for work where I take an export and manipulate the data to show differences between sales from last year and this year. Also comparing this months projected sales to avg of last 6 months and also against last years this month.
The problem I'm running into is in automating the this month sales for mid-month exports. I can do it individually but I can't find a formula that will do it. Data is in one cell per month, so ex. 130 sales this month so far. I need to have it convert that to projected sales for total month based on what day it currently is.
I have sheet with rows and column from cell(1,1) to Cell(8,18) and it has #N/A inside these data. Is there a way to use Find function to find #N/A and replace it with empty space?
The sheet that this will be applied to comes in weekly and can have anywhere from 10K to 30K.
I want the VLookup equation to be able to find the last possible row with data in column A and then copy the Vlookp equation in column B to the last row.
Can someone please provide the correct code that will allow me to do this?
That helps me find the value in the last row that actually has data in my spreadsheet. This is great, but I want to try to accomplish the same thing without vba. In other words, in cell A3, I always want the value that is in the J column, but the last row that has data. (In other words sometimes the last data row ia 97, sometimes it is 23.) Since the value is always changing this won't be vlookup. Is there another excel function that can find the end without the use of vba?
This might seem goofy to need to do since I already know how I can in vba, but in my (admittedly pathetic code) I keep have an endless loop and if I can figure out a way to get this value on the ss.
I need to find, using VBA, three highest numbers out of entire column (L), select 13 appropriate ranges like for L9 - A9:M9 , for L8 - A8:M8 and for L7 - A7:M7 and copy to a different sheet.
I have two sheets of data and two tables (1=finial 2=data comparison) I am trying to figure out some kind of formula or vba that can easily tell me that the location point in table one data comparison matches the location in table two. The VPMDFS (location footage) in table two or NDE data can be a range, say vpmdfs.NDE + or - 3 ft. so the ILI or source record should fall in between this range. Once the match has been made I need to copy and paste that record onto sheet one all in the same row. I have been scratching my head and researching for weeks and cannot come up with a simple solution. My problem with all the scenarios that I've tried is the formulas what the data in the data comparison sheet to already be in the same row. Please reference my attached work book for examples.
