Macro For Finding Difference Between Two Timings Of Column And Adjusting Them?
Mar 27, 2014
HTML Code:Â
Time,s act1act2
21.12.1
31.22.2
41.22.3
51.32.4
61.42.5
71.42.6
81.52.7
91.62.8
101.910
112020
124030
136020
144010
152010.1
16310.2
17310.3
I have this data...I need a macro which can find difference of timing between peaks of "act1" and "act2" and can adjust the act2 column such that their peaks are on same line.. For exampe here in data peaks of "act1" is at 13seconds and of "act2" is at 12seconds..so the difference is +1...I will insert 1 one cell in "Act2" from above which will shift down the column such that 60 in act1 and 30 in act2 will be in line...or for another example if 30 is below 60 ....>..if difference is -1 seconds or in minus it can delete the same number of cells from above in act2 coloumn(deletion of cells from the beginning which are under the title act2)..
View 1 Replies
ADVERTISEMENT
Jan 27, 2009
I need to find the minimum difference between any two elements in a row or a column. While it's easy to do for a 3-4 elements by doing subtractions for all elements in the array, doing it for more elements leads to a very long formula.
For example, I need to find the difference between any two elements between C5 and C9: ....
View 9 Replies
View Related
Nov 21, 2006
I have a column that finds the difference between two times and I have it formatted as h:mm so that I get results such as 0:55 for 55 minutes. The problem is that when I try to get an average, median, and sum for all the times in that column it doesn't work. It comes up way short. I'm assuming it has somthing to do with the formatting.
View 9 Replies
View Related
Feb 24, 2014
I'm looking for a formula in relation to the calculation of time.What I'm looking for is a way of finding the difference between the time two cells and it displaying it in the number of hours e.g.:
Cell 1__Cell 2__Cell 3
12:00 + 18:30 = 6.5 (it is 6 hours 30 mins but I want it displayed as a number.
View 5 Replies
View Related
Oct 13, 2009
I have approximately 40 seperate sheets in one workbook. Each sheet is a unique part #. Each part has 6 different types of transactions possible. Let's say A-F. A-F each have a date associated when them of when the transaction occured. The transactions are sorted by date. I would like to write a formula that when Transaction A occurs what is the diffence in days until D transaction occurs. Or the time differnce between when B occured and the next F occured.
below is my datedif formula, but it obviously only works in a sequential order from top to bottom.
=IF(DATEDIF(M5,M6,"y")=0,"",DATEDIF(M52,M6,"y")&" years ")&IF(DATEDIF(M5,M6,"ym")=0,"",DATEDIF(M5,M6,"ym")&" months ")&DATEDIF(M5,M6,"md")&" days"
View 12 Replies
View Related
Feb 14, 2014
I am having difficulty finding the difference between two times and dates in Excel. I have researched this on Google and tried several formulas but none have worked for me. The format the data is currently in can be seen below:
A1: 1/3/2014 11:00:02.230 B1: 2/7/2014 08:42:37.637
A2: 2/12/2014 07:51:58.663 B2: 2/13/2014 05:36:31.893
(Note all times are military time format)
I want to display the difference in C1 in a format along the lines of "dd hh:mm". The data for seconds and fractions of a second is included in the source data but is not needed in the final results.
If the date and time falls on the same day, I have no trouble doing a simple "B3-A3" to determine the answer. For example:
A3: 2/5/2014 09:56:06.273 B3: 2/5/2014 10:39:51.34
Gives me an answer of: 0:43
Trying to do the same for A1 and B1 gives me this: "03 21:42" when I format it to "dd hh:mm".
Is there a formula that would give me the correct answer in both of these cases?
View 8 Replies
View Related
Jul 11, 2013
I have got the following issue. I have got a large list of values in a column. I need to detect the the ones which are in non-consecutive order and display the difference in single numbers. For example:
1 fine
2 fine
3 fine
7 - 4,5,6
10 - 8,9
In other words I need to find the missing values and get them displayed.
View 9 Replies
View Related
Mar 14, 2014
How is MOD function used for calculating duration between two timings.
View 3 Replies
View Related
Dec 8, 2009
I am having trouble finding the difference between times. I have two cells, A1, A2. Times will be placed in there each day. A1 will have the first time and A2 will have a later time that day. i.e. A1 12:25AM, A2 2:45AM. A3 would have the formula. In this case I am looking for an answer of 2:00 (2hrs).
My second issue will be times when I have A1 11:20pm and A2 1:20am. I can't seem to get it to work.
View 3 Replies
View Related
Dec 4, 2013
I need a spreadsheet to record the number of calls taken by my staff YTD, and have it laid out as follows:
Column A Column B Column C
1 Date Calls Taken Increase
2 01/01 10
3 02/01 13 3
4 03/01 19 6
-19
etc.
The "Increase" is a simple =B4-B3 etc. But, there is a problem...
Say for example a member of staff is ill one day and therefore doesn't take any calls, I end up with a 'blank' cell in column 'B'...
Column A Column B Column C
1 Date Calls Taken Increase
2 01/01 10
3 02/01 13 3
4 03/01 19 6
5 04/01 -19
6 05/01 25 25
My problem is the increase in calls from 03/01 to 05/01 YTD ISN'T 25, it's 6.
Is there a formulae I can use that works out the difference between the latest number of calls taken and the last number of calls taken (excluding the 'blank' cells)?
View 1 Replies
View Related
Jul 25, 2014
find the difference between 2 dates in excel "date 1 - date 2"..... but I'm not quite sure as to how one would do it while excluding holidays!
View 8 Replies
View Related
Jul 5, 2006
I have a macro on a workbook that when I hit the button it asks for the date of a register sales journal that I want to import. Then it asks for the cash in drawer amount. Then it puts in all of the data into the sales spreadsheet. Now I want to use the on time method to bypass the button and the entry of the date, and even get rid of the cash in drawer. I want to make the macro run at 9:30 every night. I want it to use the date on the computer to tell it which date to find? Here is the code I'm using! button macro
' Button2_Click Macro
Sub Button2_Click()
ImportData
End Sub
Here is the main macro
Function FileExists(sFile As String) As Boolean
Dim iLen As Integer
On Error Goto NO_FILE
FileExists = True
iLen = FileLen(sFile) ................
View 9 Replies
View Related
Oct 17, 2012
I have a worksheet that is automatically updated based on actions in other sheets. There are 10 columns of data (A-J) Headings are on row 6 and data starts on row 8. I have created 3 buttons to sort worksheet by client column (B), year-end column (E) and to bring it to original order (by numbers in column A). I have created the following codes that I have assigned to each button however it does not work.
Sub Macroclient()
Columns("A:J").Sort Key1:=Range("B8"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom
End Sub
[Code]....
View 1 Replies
View Related
Jun 28, 2014
How to express what I am trying to do in a sentence but basically I have this formula
[Code] ..........
I need B# to change automatally like it does when you copy the formula but i need the N1 and N2 to stay N1 and N2, how do i do this?
View 3 Replies
View Related
Mar 12, 2012
I am trying to write a Macro that will identify a particular column by its field header (i.e. first row) and will run a specific set of code on that particular column.
My current code looks like this, coverting New York to NY:-
Cells.Replace What:="New York", Replacement:="NY", LookAt:=xlPart, SearchOrder:=xlByRows
This code applies to 'New York' found in the entire sheet. I need to identify a column that is named 'State' and then make the code run ONLY on that column.
View 6 Replies
View Related
Apr 4, 2009
I love this forum, and am usually able to find the help I need without bothering anyone However this one has me stumped and I wonder if anyone can help. It feels like it should be a fairly simple solution, but they can often be the ones that are most eluding LOL!
I have two columns; in column A are incoming telephone numbers and in column B are the date and time the calls were made. (I've put a few hashes in column A just to maintain confidentiality of the numbers, but in reality the cell is formatted as text in order to maintain the leading zero, and entries will follow the format 01234567890)
A sample would look like this:
0##6270####01-Mar-2009 00:01:440##6271####01-Mar-2009 00:03:020##6271####01-Mar-2009 00:03:040##6272####01-Mar-2009 00:16:330##6273####01-Mar-2009 00:30:490##6274####01-Mar-2009 00:55:470##6274####01-Mar-2009 01:06:170##6274####01-Mar-2009 01:07:420##6275####01-Mar-2009 01:08:360##6275####01-Mar-2009 01:11:410##6276####01-Mar-2009 01:13:45
Some numbers only call in once, I need to identify them as only called once.
Some numbers call twice, if they do I need to be able to show time it took between call 1 and call 2.
Some numbers call more than twice. For each successive call I need to be able to show the time since the previous call.
In my mind, the results table would need to look something like this:
NumberTime of callTime between
1st and 2nd call
Time between
2nd and 3rd call
Time between
3rd and 4th call
0##6270####01-Mar-2009 00:01:44Only called once0##6271####01-Mar-2009 00:03:0200:00:020##6272####01-Mar-2009 00:16:33Only called once0##6273####01-Mar-2009 00:30:49Only called once0##6274####01-Mar-2009 00:55:4700:10:3000:01:250##6275####01-Mar-2009 01:08:3600:03:050##6276####01-Mar-2009 01:13:45Only called once
View 27 Replies
View Related
Dec 12, 2013
I have data like this:
NameRank
pietro30
fabri35
mauri60
andrea45
luigi50
anna90
federica100
julia120
Now I want to pick names from column A with rank difference between name should equal to 30.
Expected result
NameRank
pietro30
mauri60
anna90
julia120
View 7 Replies
View Related
Feb 27, 2014
In my worksheet Column Y contains multiple duplicates and Column Z contains values associated with each duplicate. I want to check every row in Column Y for multiple duplicates then find the difference between their associated Column Z values.
View 1 Replies
View Related
Oct 19, 2006
I have two columns:
A B
1 10
2 9
3 8
4 7
5 6
6 5
7 4
8 3
9 2
10 1
I need a formula that takes the difference of the two columns (1-10, 2-9, etc.) and then finds the average for all of the differences. I don't want to have a third column with the differences and then take the average of those.
View 9 Replies
View Related
Aug 6, 2014
I need to look colB and colC should be equal to colH and colI, IF both cells matched, then copy the EmpNo(ColB or colH) and Counter(colC or colI) get the difference of values in another colomn
If there is any row for Employee or Counter issing from either of tables populate with RED in either of 2 colomns,
for example:at row 17, table 1 has a missing colC, and row 17(table1) = row18(table2), it should populate the row17 for table2, as a reference.
View 5 Replies
View Related
Aug 21, 2013
It will be easier to explain in an example:
A B
Time (hh:mm:ss) Digital
1 10:03:00 0
2 10:03:01 0
3 10:03:02 1
4 10:03:03 1
5 10:03:04 1
6 10:03:05 0
[code]....
From the data above I am searching for the duration of when the digital column says '1', i.e my function = A5-A3 which would output 2 secs or 00:00:03 & likewise A9-A8.
The problem I have is that the digital signal is staggered and does not always have the same frequency. I have over 6848 lines of time to check so to do this manually would take me all day.
View 8 Replies
View Related
Mar 2, 2008
Have 2 columns with time values and the third showing the time difference ( no Problems). what to hide the row if the time diff is > 2 seconds? (problem) What would be the best why to do this
{Sub TimeDiff()
Dim i As Integer
Dim timevalue As Date
timevalue = "00:00.20"
Application. ScreenUpdating = False
With ActiveWorkbook. Sheets("Racing")
For i = 4 To . Range("M1") - 1
If .Range("P" & i) > timevalue And Rows(i).EntireRow.Hidden = False And .Range("P" & i) <> "" Then
Rows(i).EntireRow.Hidden = True
End If
Next i
End With
Application.ScreenUpdating = True
End Sub
View 2 Replies
View Related
Nov 29, 2012
I am trying to calculate Change for following set. The Calculate field below shows how to arrive at the change. Any logic that I can use to get to Change? Match AccountID and find change in Value from Wk =1 to Wk= 2 without using pivot table option
Wk
AccountID
Value
Change
Calculate
[Code]...
View 2 Replies
View Related
Nov 29, 2011
I have an application (in xl'97) where users enter a date in N4. =TODAY() is in C7 as the date of entry. I need some vba to show a message should C7-N4 be >10d.
View 2 Replies
View Related
Sep 29, 2013
I have 1 workbook contains 2 Sheet with Name and Address in Column A,B,C,D. Sheet1 always contains New Data of Name and Address and its import from another software.
I need a macro to Compare these 2 sheets, Highlight the rows which is not in sheet2
View 5 Replies
View Related
Feb 10, 2009
I have two columns. One column has UPCs - some of which are duplicates. The second column just has number values. I'm trying to add the sum of all of the numbers in column two which are attached to their respective UPC. For example,
COL A///// Col B
11111111111///// 10
00000000000///// 15
11111111111///// 10
11111111111///// 4
00000000000///// 2
So, I need a third and fourth column to give me the total value for a single SKU(col A) of all the values in col B. In this example the Third column would contain the SKU, and the fourth column would contain the sum of all values in column B that are associated with the single SKU in column three. The third and fourth column would look like this:
COL C///// COL D
11111111111///// 24
00000000000///// 17
View 2 Replies
View Related
Jan 4, 2014
Please find attached a daily copy of a spreadsheet that is used to monitor train running times.
The columns on the left - "Serv No, Serv Start Date,Train No:, Scheduled Arrival, Scheduled Depart" are provided to us automatically and the underlying cell formatting/formula cannot be changed. This information is cut directly from a daily report sent to us the previous day. The cell formatting for the start date is custom - dd-mm-yyyy hh:mm.
The sheet is usually locked out with user access only to the left hand side to cut and paste train times in and the input columns on the right hand side. User has no requirement to adjust any details in the left had column apart from to add additional trains at the bottom is need be. I have left the loaded sheet blank and complete with all underlying cell formatting, conditional formatting and formulas intact for you to play with.
Both sheets essentially do the same thing so whatever formula changes are made to the empty sheet can be adapted for the loaded sheet.
For simplicity, I will focus on the empty sheet. What I am mucking around with is having the user input the train arrival time in the "Actual Arrival" column - (column F)
What I am looking at then making occur is the spreadsheet automatically filling the adjacent columns with the appropriate text and calculations.
To do this excel needs to compare column the number (cell input is text formatted) as a number with the arrival time in column G. It then needs to calculate if the train is Early (16 minutes or more before scheduled arrival), on time (+/- 15 minutes either side of scheduled arrival) or late (16 minutes or more after scheduled). It then needs to automatically place the letter "E", "O" or "L" in column K and the time differential in column L.
My problem is two fold.
Firstly, I cannot seem to make the spreadsheet automatically enter a letter into column K depending on the above conditions.
Secondly, I have had limited success in having the spreadsheet compare column J with column F and working out the differential. However, this only works if the time remains linear. IE only if the train runs on time or late. It gives an incorrect time differential if the train is early. I will attach this spreadsheet tomorrow as an add on to this post.
DAILY TRAIN RUNNING.xlsx‎
View 3 Replies
View Related
Apr 18, 2008
I am trying to figure out a formula for the boss, but I just cannot wrap my mind around what I need to do. I’m sending out an S.O.S.! If you can figure this out, please respond.
=MIN(b4*12-25%,b4*12-500) + MIN(c4*12-25%,c4*12-500) fills in the cell with the correct answer, but not quite the answer that I need. Let me illustrate:
The first part of the formula is to take b4 times 12 minus 25% --if this amount is less than or equal to 500 then use the amount. If it is more than 500 then use 500.
(b4*12-25%)
234.25 * 12 = 2811 – 25% = 2811
2811 - 25% = 702.75 500 Since this amount is more than 500, 500 should be used instead. ~~this is actually the amount that I want to show in the cell, the amount saved~~
2811 - 500 = 2311 ~~this is the answer that is showing up in the cell, which is not quite what I need. ~~
I want to find the answer to this question: b4 times 12 equals ?, subtract 25% or 500 from that, insert this answer into cell.
One of my biggest problems with this is that I can’t even figure out how to say what it is that I need. The formula is doing exactly what I'm telling it to do and I can't even figure out what it is that isn't working. This formula is confusing my brain…!
View 9 Replies
View Related
Apr 6, 2012
Here is what I am trying to accomplish.
I have to columns.
I have copied column A from a PDF file. It contains entries like this, all in the same column:
5 0.002HP Direct- 26845 7/1959 Airesearch
This column contains an ID # (5), a description (0.002HP Direct), a part # (26845), a date (7/1959), and a manufacturer (Airesearch). All this info is in one column. This column is 11,000+ entries long.
I have column B which is 45,000+ entries long, and contains ONLY part numbers, like this:
325111
I would like to compare column B to find the matching results from within the text of column A, and put these matches into column C.
View 3 Replies
View Related
Jul 2, 2013
augmenting current code to select the column after a column. Current code is:
Code:
If Sheets(data_sheet1).Cells(2, iCol).Value = "Stations" Then TargetCol = 1
If Sheets(data_sheet1).Cells(2, iCol).Value = "Agency" Then TargetCol = 2
If Sheets(data_sheet1).Cells(2, iCol).Value = "Advertisers" Then TargetCol = 3
If Sheets(data_sheet1).Cells(2, iCol).Value = "Product Code" Then TargetCol = 4
The next line should find the column after "Product Code".
View 1 Replies
View Related
