This Macro is supposed to get certain totals for me from diffrent pages. Instead of selecting an entire row I want to select specific cells, so when it finds the word total on the sheet, whose location can change often it will return the value two cells away.
View 3 Replies
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
I have recorded the below macro and I am not very happy with it. enhance the macro and add the following:
I need to copy the range "ROW" and past it below the range "MENU". Also the range "ROW" (ROW = copy of 3 line with some cells merged) is hidden.
I need to unhide and hide back the rang ROW. Right know I have to leave the range appearing otherwise my macro doesn't work.
HTML Code:Â
Sub ADD()
' ActiveWindow.LargeScroll Down:=2
Range("ROW").Select
Range("ROW").Activate
Application.CutCopyMode = False
Selection.Copy
' ActiveWindow.LargeScroll Down:=-2
Rows("7:7").Select
Selection.Insert Shift:=xlDown
Range("A7:A9").Select
End Sub
There's one sheet that has a list of customers (this is updated very frequently). These customers are either ‘New’ or ‘Existing (as listed in a corresponding column) - would it be possible to have a macro that, when run, will place a copy of existing customers into a second worksheet (“view list – new”), and a copy of new customers into a third worksheet (“view list – existing”), with the main worksheet still listing both existing and new customers.
As the main sheet that lists all customers is updated very frequently (with customers being added and removed throughout the day), would it be possible to clear all contents of the other two sheets that each list of 'existing' and 'new' customers will be copied into, before the two lists are copied into each of the two sheets (just to ensure there isn’t any data in there from the previous time each list was copied in).
I’ve given this a go via the ‘record macro’ function - some users of this WB use excel 2000, and others use excel 2007, but it only seems to work on excel 2007 (which is what it was recorded on)…
I have a current macro that saves each sheet as their own file. The first 10-15 sheets are not really necessary, so I typically delete them once the macro has run. I am looking to add two things to my current code:
1. Add a tab called Start. Make the macro look for 'Start' tab and then just save each sheet to the right of that as its own file.
2. Save each sheet in the macro as just a copy/paste value. They current have a lot of links and it makes each file close to 3MB. That makes it incredibily difficult to paste all in one email.
Here is the current code:
Sub CreateWorkbooks()
'Creates an individual workbook for each worksheet in the active workbook.
Dim wbDest As Workbook
Dim wbSource As Workbook
Dim sht As Object
Dim strSavePath As String
On Error GoTo ErrorHandler
[Code] ..........
Copy paste specific column with specific heading using macros. Roll No
Name
1
John
2
Abdul
3
Baig
1
I Want the Macro to find the column with heading "Name"
2
Copy the list from Name till the last Cell that is B1048576
3
Paste in Sheet2 Cell A1(Please see result in Sheet2)
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
I want to copy some data from internet and paste it in to worksheet location Range A1:A30. the data look like following information.
LocationKuwaitP.O.Box:4819 SafatAddress:ShuwaikhTel:-22253580Fax:-24343645Category:CONSTRUCTION COMPANIES
the above information have following header ie. Location, P.O.Box, Address, Tel, Fax and Category.
every time one of the header inforamtion is missing ie. Address or P.O.Box, Or Fax, due to this problem every time cell address of information aganist header is change. supose in first copy/paste Tel inforamtion is in A15, but second time it may be on A13, and 3rd time it may be on A17 and so on.
I want to make a macro which search header ("Location", "P.O.Box", "Address", "Tel", "Fax", "Category" ) from a Range A1:A30. than down two steps to copy header information (75325412) and paste in fixed cell location C1:C5 (C1=Name, C2=Location, C3: P.O.Box, C4=Address, C5=Tel, C6=Fax, C7=Category) in same sheet. and repeat the steps to copy information aganist header from all header in Range A1:A30.
I have rather large Excel file that spans around 245 columns & has multiple users responsible for certain columns. Columns are chunked to provide data about a specific group. Every 72 hours, I need to provide to managers what’s currently on this file in a specific summary format.
I’ve recorded a macro that gets me half way there. Here’s where I’m clueless. After my macro deletes unnecessary columns, what remains are the columns for “Main Data” group + each of the 5 “Business” groups (Investors, Lawyers, Credit, Finance, and Support) which would have identical column headings.
(1) Name (2) Address (3) ID# (4) Control#
Furthermore, for each of the 5 “Business” groups, there are 9 slots (ie- a user can enter up to 9 unique entries for a particular group.)
Example- The Investor group contains 9 slots. Each slot will contain the 4 columns mentioned above. So there are 46 slots in total – 1 for Main Data, 45 (5 groups x 9 slots) for Business groups.
MAIN DATA (columns A-D)
Investor1 (columns E-H)… Investor2 (columns I-L)… Investor9 (columns AK-AN)
Lawyer1… Lawyer9
Compliance1… Compliance9
Finance1… Finance9
Support1… Support9
MY PROBLEM: I need a macro to now cut & paste all data from each of the 45 Business groups slots & then paste at the bottom of the MAIN DATA slot.
The final file would be 4 columns (as listed above) wide. Data from each of the 45 business group slots would be one below the other- all of it underneath the data in the Main Data group.
I attempted to record a macro where I’m copying a section’s data range starting from row2 to row4000 (I know there will never be 4000 entries. I did this just to ensure that all future data would be captured) then pasting that after the last entry in the Main Data.
Example- I’d copy data from Investor1 slot(starting at column E2-H2) & go about 4000 rows down. Then I’d press CTRL+Down Arrow key in column A & then click the down arrow one time to take me into 1st empty cell where I would paste my copied data. I was going to repeat this process for the remaining 44 slots.
I’ve added some extra entries to test the macro & the problem is that the recorded macro is pasting data in specific cell location in column A instead for looking for the 1st empty cell in column A & then pasting the copied data.
So far I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work. Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A. I've gone thought the net & tried to paste in a few VBA posts/tips that I thought would work.
Here's what I have so far from tinkering around. I need someone to tell me what to replace the xxxxxxx line with. This would be the language to tell Excel to paste copied data range into the first blank cell in column A.
Sub transposedata()
Sheets("ConsolidatedYTDReport").Select
Range("E2:H4202").Select
Selection.Copy
XXXXXXXXXXXX
ActiveSheet.Paste
End Sub
I am making a worksheet that I intend to use to track my money. When I first open the worksheet, it opens on a tab where I can click a button to report a type of transaction. For example, if I make a withdrawl from the bank for $50, I click the button, it takes me to the sheet that tracks my bank-related stuff, selects a cell and opens up a form, at which point I type in what the transaction consisted of. However, the sheet also tracks what is in my wallet, so I'd like to finish reporting the bank transaction in the form, and have a button to click that reports the wallet part automatically.
So, essentially what I need to do is select several non-contiguous cells that are in the last row of the bank sheet, copy them, switch to the wallet-tracking sheet, and paste them in a row that is one past the last row of that sheet. The paste should keep the cells next to each other, even if they were non-contiguous when they were being copied.
I have a excel file with more then 10 sheets..Some of the sheets contains this word in some random cells" #DIV/0! " I want a macro which can find it in every sheet except parent sheet and can remove it.
View 5 Replies View RelatedI have a protected template and unprotected source worksheets - - - what I would like to happen is for the macro to start and if the source worksheet cell B3 equals "Report Total" then stop - otherwise copy template worksheet then copy 6 specific cells from the source to paste values to specific cells on the newly created worksheet (B_ to C7, D_ to I7, E_ to C9, F_ to K9, A_ to C11, M_ to K11 and then K13=F13-30)
After that then start all over again unless the next row’s cell (B4, B5, B6, . . .) is "Report Total" then stop - - - the row count could be from one to a couple hundred.
Here is what I have so far but I know that with each copy the name will change and as it goes down the source file each row will change and I also need help with that.
Sheets("ee template").Copy After:=Sheets(3)
ActiveSheet.Unprotect
Selection.ClearContents
Range("I7").Select
Selection.ClearContents
Range("C7").Select
Sheets("source").Select
ActiveCell.Offset(0, -11).Range("A1").Select
I have a code which is copy/pasting the selection specified number of times
VB:
Sub CopyNtimes()
Dim i
For i = 1 To Application.InputBox("How many times do you want to copy the selection?", "", 1, Type:=1)
With Selection
.Copy .Offset(i * .Rows.Count)
End With
Next
End Sub
How to modify this code so that it can paste the selection specified number of times leaving specified number or rows
For Example:
Selection is A1:Z10
need to copy paste 2 times...
Rows to leave: 3
So it should paste in the range A14:Z24 and then A28:Z38
I have dates in Column I (for the whole year) and i would like to paste them into specific cells in three different Columns A,B,C (ie A2, A5, A8, A11 etc) Same Numbers different letter for each respective column. I can get it to go from one cell to another but when i try to specify specific cells
This is what i have so far:
Sub Test()
Range("I1").Select
Selection.Copy
Range("A2").Select
ActiveSheet.Paste
End Sub
I create a macro to copy cells for data starting from A4 to N4 from sheet - Register to 'Case History' when the cells in column N are 'Yes'. Also, would like to copy specific range from A-N and not the entire row. Please refer to the attachment.
Tracker Dept..xlsx
Feedback.xls is the file I want to have my macro run in. By pushing a button to run the macro, it will prompt the user to select where their file is on their computer. This file will have different file names based on the end user. For example sake, I've included CAP.xls.
After the user selects their file, it will prompt them to choose which tab to copy and paste data from. Typically, there will be 30+ tabs on their worksheet. For example sake, I've created 5 tabs on CAP.xls. The tabs in their workbook will be labeled as I have labeled mine, M1 CAP, M2 CAP & M3 CAP. Therefore, it should prompt the user to select which tab to choose from.
After the user selects their tab (M1 CAP, M2 CAP, M3 CAP), the macro should prompt the user to choose which row of information to copy. In CAP.xls, I have a few rows of information to choose from. They all start with FY10A1, FY10A2, FY10A3, but this information could change. Once they select the row, it will copy each of those fields onto the respectively labeled fields on Feedback.xls.
I have workbook "Sheet1" that has many rows and columns with values. Could I have code to find the cells value "plant2300" in column A and copy all the rows in column A that has the cell value "2300" into workbook Sheet2 (also copy with headers from Sheet1 to Sheet2 row 1).
View 3 Replies View RelatedI have a cell that contains various data but in the cell there will be a string of characters that will begin with either ON or TN followed by numbers. What I would like to do is have the sheet look at that cell and if there's a TN12345 (or any combination of numbers) or an ON123456 (same idea as the TN) I would like the sheet to pull just the ON or TN number out and paste it in a specific cell. The ON would have it's own cell to be placed in as would the TN.
Here's an example. C5 contains various data, a mix of text and numbers but it will have either an ON or a TN or both. I would like the sheet to automatically pull the TN number out and place it in A5 and the ON in B5. I would like this process to repeat all the way through the sheet to the max amount of rows since I have no way of knowing how many rows I'll need. Can this be done with a simple IF formula or does it have to be done in VBA or is it not possible at all.
I am attempting to copy a range from one worksheet and paste it to a new worksheet when the system clock hits a specific time. It needs to run continuously and identify that a previous colum has been filled and paste into the next open column. I am just getting my feet wet. I have some code to begin with but I am getting a 1004 error.
'Application. ScreenUpdating = False
Sheets("mysheet").Select
Range("E3:E10").Select
Selection.Copy
Sheets("CmyOtherSheet").Select
Range("B1:B8").Select
ActiveSheet.PasteSpecial xlPasteValues
'rTime = TimeValue("12:31:00")
'Application .OnTime rTime, "RunThisProcedure"
I need copy duplicate data to another sheet, but paste only column(1,2,4,5,6,13,14)
[Code] .....
Cross-Post : [URL] .....
Yeah it is 1:33 am where I am.
I'd like to filter a column and paste only 2 columns to another sheet in the first available row.
I found a code that was posted by Tom Ogilvy and made a few adjustments: ....
Is there any way to copy a column that has a specific range
=COUNTIF(B10:BE10,"*p")
=COUNTIF(B12:BE12,"*p") etc
to copy that to a column lets say 5 columns to the right without my range changing?
=COUNTIF(G10:BJ10,"*p")
=COUNTIF(G12:BJ12,"*p")
I need the same range in all columns, and I cant seem to accomplish this.
I use the following codes to copy a cell which contains a picture and paste it to another worksheet. I think these codes copy more than just the picture.
Since pictures in Excel are not associated with cells, how do I copy just the picture in a particular cell and how to determine the size of the picture?
These codes are in a for loop.
Code:
tempCell.Offset(0, -1).Copy
Workbooks(fileName & ".xlsx").Activate
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).Select
Sheets(1).Pictures.Paste
Workbooks(fileName & ".xlsx").Sheets(1).Cells(cell.Row, cell.Column - 1).RowHeight = tempCell.RowHeight
I have a excel file with two worksheets. I need to find a specific row in column g, cut the entire row, and paste it into sheet2. I have started off by using this code, that I got off of some site. It works wonderfully in finding the specific cell, but just copys and moves the specific cell into sheet2. Whereas I need it to cut and paste the entire row where it finds the cell that begins with a 3 in column G.
Sub Copy_To_Another_Sheet_1()
Dim FirstAddress As String
Dim myArr As Variant
Dim Rng As Range
Dim Rcount As Long
Dim i As Long
Is there a way to copy then paste specific cells from closed .xls files in one directory ( more than 500 files ), and how, if all files are with one known password protection( my own files ).
View 9 Replies View RelatedI enter a part number in "D1". The number of components required for that part number is returned in "G1" based on a VLookup. I would like a macro that will copy and paste the part number I enter in "D1" in the first empty cell in column "D" and will paste it once for each component (G1) required. For example, if the number of components required is 4, and the first empty cell in column "D" is "D10", I would like to paste the part number in cells "D10", "D11", "D12", and "D13".
View 2 Replies View RelatedI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
I have around 200 excel spreadsheets/workbooks with identical ranges but each with different data. There is a total of 5 columns and 225 rows in each spreadsheet/workbook. Looks something like this:
Workbook 1:
Title 1
Title 2
Title 3
Title 4
Title 5
A2
B2
C2
D2
E2
[Code] ....
The Cells I need to copy are in BOLD. I am trying to paste them onto another workbook as follows
Main Workbook:
Workbook #
File 2
File 3
File 4
A2
Title 5
A3
Title 5
[Code] ....
As you can see, each workbook has identical A2 and Title 5 columns, so they only need to be copied once onto the Main workbook where data from the B and E columns are different for each Workbook. So not only I need to copy and paste from a Workbook onto the Main Workbook, but the code has be able to paste it onto a new row in the Main Workbook (where each row in the Main Workbook will correspond to the data copied from Workbooks 1-200.
I am new to VBA but I tried a code where I would copy and paste one cell at a time onto the same workbook and not onto the Main Workbook, and then how to copy and paste from one workbook to another, but as you can imagine that would take a long time:
VB:
Sub dAmacro()
Sheets("Workbook1").Select
Range("G1") = "Workbook #"
Range("H1") = "File 2"
Range("I1") = "File 3"
[Code] .....
It seems like I need some kind of loop, where it would copy and paste a set of cells and repeat the entire process until it reaches the end of the Workbook 1 while making sure when doing same thing for workbook 2, that the data pastes onto a new row onto the Main Workbook. I feel I have the logic down, but its in the syntax where I am failing.
I need to copy and paste the specific dates from the specific city that the user will insert in the "dash" sheet.
Basically, I need the macro to read the city and range of dates that the user will type into the "dash" sheet and copy the columns "AA" to "AD" from rows specified by the dates input. Once it has been copied, it has to be special pasted just the value onto the sheet "1" beginning at location B2.
the the data will not be available as it is vlookups to another excel sheet that i have not provided. I have deleted the data, but you can pretty much put 1's everywhere.
