i'm trying to return a value thats offset but the position of the value may change each time data is imported. i've attached sheet displaying problem, as i can't explain clearly. i need to lookup the value in column A (yellow), then find and return the total percentage value in column C (blue). its always 2 columns across but the problem is it could be anything from 2 to 5 rows down.
View 6 Replies
I have a sheet that a VLOOKUP is looking at, and what I need is, if that VLOOKUP finds what it is looking for I need it to look at the cell 2 cells to the left, how is that done?
I am thinking something like:
Formula:
[Code] ......
I just don't know the offset part.
I have a set of data
Col A, B, C
A = Date, B = Interval e.g 08:00, 08:30, C = Number
My aim is to lookup to A+B in order to retrieve C
I have tried and offset within a lookup and upto now have been unable to proceed, I have attached the formulae I was using;
=HLOOKUP($I$4,Sheet2!$A$5:$A$6,OFFSET(B5,MATCH(H5,Sheet2!$B$5:$B$6,0)*0,1),FALSE) - returns the date value
I am trying to use offset & lookup, to return a cell x rows below the lookup value. I am able to get the correct result when I use the lookup and offset functions separately. When I nest the lookup function within the offset, I get an error.
View 6 Replies View RelatedI have a range of numbers in row 8 all of which are unique, then another range in row 20 (there are numbers in between but I'm not worried about those). I'm trying to get a code or formula that will find a user defined number typed into c30 (which can change) in row 8, then scroll down to row 20 (same column) and sum all the values from b20 up to and including this point (along this row). The number inputted into c30 will always exist somewhere in row 8.
I can't work out if this is possible using lookup/offset/cell/sum/other functions, figure it may need VBA.
I have a large array of cells that go from A1 to A2500. In VB, I need to take a given date that resides in a cell, say 1/6/2006 in C2, and look for a match of it within this large array. When the match is found, I need it to look in the column to the right (IE, from A5 to B5) and assign the value there to a Cell (C1).
Could someone provide an example of the code I was use in VB for this? I'm having a lot of trouble with it.
I have a worksheet of data that I am trying to reference to. I will have the data as a "dump" on one worksheet, and lookup from that sheet. I've attached an example of the data dump. I need to essentially VLOOKUP the value (i.e. 054_6425) and then count over 3 columns, and down two rows. I've tried INDEX MATCH, but can't get that to work. Can you get VLOOKUP to count over and down and return a value? File "example" is attached.
View 2 Replies View RelatedI am referencing a value in column A of Sheet 1. I am looking for that value in column B of Sheet 2 and would like to return the value of the cell that is 1 row below and 4 columns to the right (column F). I need to do this multiple times.
Can I use a VLOOKUP/OFFSET combo or Index/Match?
I am writing the formula in column H of sheet 1.
The Vlookup portion is already working but I need the value located one row below that one.
here is what I have, which return the value itself, I cant seem to incorporate the offset function ion VBA:
Cells(x + 1, y) = Application.WorksheetFunction.VLookup(TempName, Worksheets("Data").Range("F1:F100"), 1, False)
In the attached workbook, the following formula appears in column B of the "dropdown" tab. I want to basically do a two criteria lookup, using the values in column A and the value of cell B1, which is a dropdown based on a dynamic range consisting of the company names on the Discounts tab.(starting with cell E1, extending rightward) To make this easier for testing purposes, I'm curretly using cell E1 instead of B1, which is just text.
It seems like this ought to work, but somehow it doesn't:
=OFFSET(Discounts!$B$1,(MATCH($E$1,Discounts!$C$1:$AA$1,0)),(MATCH(A5,Discounts!$B$2:$B$200,0)),1,1)
I am having a heck of a time coming up with the proper combination of functions to return data to my worksheet.
Attached, you will find a screen shot of the pages I am dealing with.
Here is what I am trying to do:
On the page named Update Master, I am trying to put formulae into the highlighted cells C2:C11. Each cell will contain a formula to MATCH the team name in UpdateMaster!A:A with a team name in the chart found on worksheet WEEK ONE. Then, I want to return the value found 8 cells down, and 1 cell to the right of that MATCH. Here is a specific example:
In cell Update Master!C2, I need a formula that will MATCH the value in Update Master!A2, , with a value on the WEEK ONE! worksheet. (In this case, 2EZ. After locating the match, I want to return the value found in the bottom right of that players weekly score box. (WEEK ONE!C9...in this example).
I can't make a direct reference to the data...because the value in Update Master!A:A will change after each week. The team names will be sorted in alphabetical order after being sorted by the value found in Update Master!AE:AE...(each player's accumulated score).
I have tried so many combinations of MATCH, LOOKUP, OFFSET, INDEX, ROW...etc., and I keep getting VALUE# or NA# errors at some point in the computation. Maybe one of you can point me in the right direction.
I am looking to do lookup list using the offset function. Scenario: I have 5 dealer groups, each with there own dealers. Each dealer has a list of customers. Once I select the customer it will bring up a list of their vehicles. I am stuck on selecting the customers and vehicles once the dealer group and dealer are selected.
View 1 Replies View Relatedon sheet 1
I have a list of race car numbers (20K, 15W, 2) in A1:A50 (may be more or less than 50)
Next to them in B1:B50 are the point values they earned for a night of racing. 100-97-94 etc.... these are points they have earned for a night of racing that week.
in C1 I have how many column over I need to write to (ex. 4 for Column "D" on sheet 2)
On sheet 2 I have all the total for each week.
example
A1 B1 C1
Car 4/22 4/29
20K 94 90
15W 97 100
......
What I need is some code to go down the driver list on sheet1 and write their points in colum D on sheet 2 when it finds the appropriate car number. If the car number does not exist then add the car to the bottom of the list (A50) or whatever, and write the points 4 columns over.
I have a data range set up in a step chart formation. This means there is a "Name" to the left and a time line of "values" to the right in quarterly increments (3 months at a time). Row 1 has the first month of each quarter and should be used to find the start date. Row 2 has the last month of each quarter and should be used to find the end date.
I need to find the first value from left to right and return the date directly above it in row 1.
Then....
I need to find the last value in the step chart and return the date directly above it in row 2
Example
Start Date..A...B...C....D...E...F
End Date....U...V...W...X...Y...Z
Value-1...........5...2....7........
Value-1
Start Date: B
End Date: X
Duration: = B - X
The reason i need this information is to create a Gantt Chart.
I have all my data on sheet 2 which contains tables that relate to information on regions, manufacturers, etc so it can be a large amount of tables which will change from month to month depending on a monthly list.
For example, if “Region 1” is in cell B134 – the resulting data I need to pull out will be contained in C138:G232 ...or ”Region 2” which is in B235 – table info is in C239:G333, etc, etc.
On sheet 1, I have a cell (L7) that is populated by another formula. This cell is effectively my lookup to pull out information from sheet2 to populate cells in (sheet1) AE119:AH212 - same sheet as the reference (L7).
I need to look up the reference/resulting value that is in L7 on sheet1, find and match against the values in column B on sheet 2 and then pull in the corresponding table information.
If the value in L7 was not changing at all I could do.. in cell AE119… =OFFSET(sheet2!B134,4,1,1,1) etc etc
... but I am at a loss as to the value in L7 changing and incorporating a lookup… or maybe I am looking at it wrong..?
I have looked up match, offset, index and lookups on the forum and have managed to confuse myself even more. I have even tried taking some of the example formulas and amending with my references but to no avail.
I have 2 columns of data (col A is time, col B is a value), in a range A4:B1000 (can be less, but the biggest the range will get is to B1000). Example:
A / B
4 10:37:55 / 91
5 10:37:56 / 92
6 10:37:57 / 93
7 10:37:58 / 100
8 10:37:59 / 105
9 10:38:00 / 110
10 10:38:01 / 111
11 10:38:02 / 115
12 10:38:03 / 120
Im looking for a way in VBA to look for a time entered in cell C1 (example 10:38:00), find that in column A, then return the average of values in column B that are offset 271 - 300 rows. This is entered in D1. So in my example, 10:38:00 is in cell A9, return the average of B280:B310.
The main worksheet in my workbook contains lists of suppliers with unique Vendor Numbers, of which there are approximately 4,500 rows. There is another worksheet which holds approximately 6,500 entries I need to bring data from that sheet to the main sheet using the Vendor Number and the information that is held on 4 columns unique to that number.
The information is a classification system that comprises of 4 columns holding a mixture of numbers and text.
Worksheet 1 has the Vendor Number in Column A and the Classification destination starting in Columns Q, R, S & T.
Worksheet 2 once again has the Vender Number in Column A, and the Classification information in Columns C, D, E & F.
What I need guidance on is how to build the formula to copy the information across, or direction into what other method I should be looking at instead.
In the attached spreadsheet you will see the table of data in cells e6:L16. In cell N6 i am doing a hlookup to find the date in the table of data that is closest to the date in cell A4. The formula in cell M6 is where i am having the problem and i was trying to pull in data that is 4 columns to the left of where the hlookup date is in cell N6. The problem i am having is when i input any date higher than 06/30/07 the Index formula does not display the correct date. What is confusing me is that the Hlookup formula in cell N6 still works with higher dates but the index formula does not.
View 6 Replies View RelatedI am having a problem writing a macro that sources one of its values from a cell that contains the following formula =LOOKUP(J9,{0,80,85,90,95}, {"0%","40%","60%","80%","100%"}).
The above formula correctly returns '80%' but when I use this cell as an input for another formula Excel reads it as '0%'. Can, and if so how does, one use the resulting value of the lookup function as a fixed value for another function?
i am trying to make report for Mycompany sale
when i sert the date of Sales give me all the date of payment for this invoices
here is small example
ABCDE1Invoice DateInvoice NumberPayment Date
Invoice Date22009/06/011112009/06/05
2009/06/0132009/06/011122009/06/0542009/06/011132009/06/0452009/06/011142009/06/0262009/06/021152009/06/1072009/06/021162009/06/0682009/06/021172009/06/1392009/06/021182009/06/13102009/06/031192009/06/13112009/06/031202009/06/05122009/06/031212009/06/04132009/06/031222009/06/10142009/06/031232009/06/10152009/06/031242009/06/05
I WANT
when i insert the date in E2 to give me all the date of payment in this day in range under this cell
In my spreadsheet I have a column (C) that consists of 20 rows. Within this column a calculation is done with only one value (currency) that appears based on the calculation criteria. All other rows are 0 (currency) and the correct calculation can be in any of the 20 rows.
In an adjacent column (say E10) I want the appropriate value to be entered from column C.
I have tried searching for this topic and have been unsuccessful. Perhaps my search was too broad. Either way, I am trying to understand how to search/query a specific data entry among several sheets, and then return corresponding values from adjacent cells.
View 3 Replies View RelatedI created a drop down menu from a named data range on a seperate spreadsheet in the same workbook. Based on the selection from that drop down menu I want a preassigned number to pull into another cell. I'm not thinking of the correct formula or something, because it's not working. Could it be because it's text? My spreadsheet with the data is as follows:
Bridger to American Fork 051725
Hunter to American Fork 051725
Hunter to Delta 051715
Hunter to Hiawatha 051728
Navajo to Am. Fork w/ front 051725
Navajo to Am. Fork w/o front 051725
The 1st column is the origination/destination and I named that range "freight hauls". Which is what the dropdown menu on another sheet (AP Reconcilliation) consists of. From that, I want the 2nd column number to pull into another cell on the AP Recon sheet. The formula I wrote that isn't working is: =index('AP Reconciliation'!A2:B8,match(A6,'Freight Hauls List'!B2:B7,0),2)
I'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
Range.Formula="=vlookup(Range(""SomeName"").Offset(1,0),DataRange,2,False)"
I want to scan the envelopes coming into our postroom and look up the results within excel. I would then if I match the name be able to print out the details e.g. name floor they are located on etc..
View 3 Replies View RelatedI have an excel worksheet that consists of 4 tabs. Each tabs has approximately 60,000 lines of data. The data consists of user id's and menus that correspond to the user id. There are 131 user id's in total. I would like to be able to return all the menus for one of the user id's. If we need to start with one tab and work from there, that's fine.
View 9 Replies View RelatedI have a production planning spreadsheet that is updated every week from a database to a new sheet. This sheet is 'Sheet1', last weeks update becomes 'Sheet2'. Every day people annotate and colour cells for various orders, depending on their place within the planning scheme. It's really only the formats that I need to copy across, I could use the VLOOKUP function for the values - So I suppose you could say I'm looking for a VLOOKUP macro/VBA Code which keeps the original formatting (cell colour etc.)
View 2 Replies View RelatedI have a list of people with SSN, about 3000. This list contains business done by each individual, which can be in all 50 states. I have another list of the same individuals with just their name and addresses and what we call "client number". I need to put the client number with the list for the individual states. See example list:
List of individuals with client numbers
123 John Doe
456 Jane Doe
List of individuals with state business
John Doe AR
John Doe CO
John Doe FL
John Doe MS
John Doe TX
Jane Doe MS
Jane Doe TX
Jane Doe AZ
I need for those client numbers to appear in the column before the names on list with states.
Example:
123 John Doe AR
123 John Doe CO
123 John Doe FL
456 Jane Doe MS
456 Jane Doe TX
621
532
249
I have these numbers located in column A (rows 1:3)
formula that will return my search result (in these case 532) as well as the information immediately above & below the location of cell that has my search info?
I have a data table, A1:J22. The purpose it serves is to align and compare data from other tables, so the data contained within it is all cell references and contains many #N/A values. Also, and most importantly, not all of the columns are populated with data. The first row is a text header row and the first column is numeric and adjusts according to the value in A2. I have an additional column at the end of the data table, yet apart from it, which contains an array formula to provide me with the maximum value of each row and to circumvent the #N/A's, =MAX(IF(ISNUMBER(B2:J2),B2:J2,"")). I am trying to write a formula that will return the corresponding "header" of the result of this formula. Everything I have tried thus far, primarily variations of Lookup and Index/Match formulas, seemingly defaults to the header of the last column containing data.
View 3 Replies View Related
