I have a worksheet of data that I am trying to reference to. I will have the data as a "dump" on one worksheet, and lookup from that sheet. I've attached an example of the data dump. I need to essentially VLOOKUP the value (i.e. 054_6425) and then count over 3 columns, and down two rows. I've tried INDEX MATCH, but can't get that to work. Can you get VLOOKUP to count over and down and return a value? File "example" is attached.
View 2 RepliesI have a set of data
Col A, B, C
A = Date, B = Interval e.g 08:00, 08:30, C = Number
My aim is to lookup to A+B in order to retrieve C
I have tried and offset within a lookup and upto now have been unable to proceed, I have attached the formulae I was using;
=HLOOKUP($I$4,Sheet2!$A$5:$A$6,OFFSET(B5,MATCH(H5,Sheet2!$B$5:$B$6,0)*0,1),FALSE) - returns the date value
I am trying to use offset & lookup, to return a cell x rows below the lookup value. I am able to get the correct result when I use the lookup and offset functions separately. When I nest the lookup function within the offset, I get an error.
View 6 Replies View RelatedI have a range of numbers in row 8 all of which are unique, then another range in row 20 (there are numbers in between but I'm not worried about those). I'm trying to get a code or formula that will find a user defined number typed into c30 (which can change) in row 8, then scroll down to row 20 (same column) and sum all the values from b20 up to and including this point (along this row). The number inputted into c30 will always exist somewhere in row 8.
I can't work out if this is possible using lookup/offset/cell/sum/other functions, figure it may need VBA.
I have a large array of cells that go from A1 to A2500. In VB, I need to take a given date that resides in a cell, say 1/6/2006 in C2, and look for a match of it within this large array. When the match is found, I need it to look in the column to the right (IE, from A5 to B5) and assign the value there to a Cell (C1).
Could someone provide an example of the code I was use in VB for this? I'm having a lot of trouble with it.
i'm trying to return a value thats offset but the position of the value may change each time data is imported. i've attached sheet displaying problem, as i can't explain clearly. i need to lookup the value in column A (yellow), then find and return the total percentage value in column C (blue). its always 2 columns across but the problem is it could be anything from 2 to 5 rows down.
View 6 Replies View RelatedI am referencing a value in column A of Sheet 1. I am looking for that value in column B of Sheet 2 and would like to return the value of the cell that is 1 row below and 4 columns to the right (column F). I need to do this multiple times.
Can I use a VLOOKUP/OFFSET combo or Index/Match?
I am writing the formula in column H of sheet 1.
The Vlookup portion is already working but I need the value located one row below that one.
here is what I have, which return the value itself, I cant seem to incorporate the offset function ion VBA:
Cells(x + 1, y) = Application.WorksheetFunction.VLookup(TempName, Worksheets("Data").Range("F1:F100"), 1, False)
In the attached workbook, the following formula appears in column B of the "dropdown" tab. I want to basically do a two criteria lookup, using the values in column A and the value of cell B1, which is a dropdown based on a dynamic range consisting of the company names on the Discounts tab.(starting with cell E1, extending rightward) To make this easier for testing purposes, I'm curretly using cell E1 instead of B1, which is just text.
It seems like this ought to work, but somehow it doesn't:
=OFFSET(Discounts!$B$1,(MATCH($E$1,Discounts!$C$1:$AA$1,0)),(MATCH(A5,Discounts!$B$2:$B$200,0)),1,1)
I am having a heck of a time coming up with the proper combination of functions to return data to my worksheet.
Attached, you will find a screen shot of the pages I am dealing with.
Here is what I am trying to do:
On the page named Update Master, I am trying to put formulae into the highlighted cells C2:C11. Each cell will contain a formula to MATCH the team name in UpdateMaster!A:A with a team name in the chart found on worksheet WEEK ONE. Then, I want to return the value found 8 cells down, and 1 cell to the right of that MATCH. Here is a specific example:
In cell Update Master!C2, I need a formula that will MATCH the value in Update Master!A2, , with a value on the WEEK ONE! worksheet. (In this case, 2EZ. After locating the match, I want to return the value found in the bottom right of that players weekly score box. (WEEK ONE!C9...in this example).
I can't make a direct reference to the data...because the value in Update Master!A:A will change after each week. The team names will be sorted in alphabetical order after being sorted by the value found in Update Master!AE:AE...(each player's accumulated score).
I have tried so many combinations of MATCH, LOOKUP, OFFSET, INDEX, ROW...etc., and I keep getting VALUE# or NA# errors at some point in the computation. Maybe one of you can point me in the right direction.
I am looking to do lookup list using the offset function. Scenario: I have 5 dealer groups, each with there own dealers. Each dealer has a list of customers. Once I select the customer it will bring up a list of their vehicles. I am stuck on selecting the customers and vehicles once the dealer group and dealer are selected.
View 1 Replies View Relatedon sheet 1
I have a list of race car numbers (20K, 15W, 2) in A1:A50 (may be more or less than 50)
Next to them in B1:B50 are the point values they earned for a night of racing. 100-97-94 etc.... these are points they have earned for a night of racing that week.
in C1 I have how many column over I need to write to (ex. 4 for Column "D" on sheet 2)
On sheet 2 I have all the total for each week.
example
A1 B1 C1
Car 4/22 4/29
20K 94 90
15W 97 100
......
What I need is some code to go down the driver list on sheet1 and write their points in colum D on sheet 2 when it finds the appropriate car number. If the car number does not exist then add the car to the bottom of the list (A50) or whatever, and write the points 4 columns over.
I have a data range set up in a step chart formation. This means there is a "Name" to the left and a time line of "values" to the right in quarterly increments (3 months at a time). Row 1 has the first month of each quarter and should be used to find the start date. Row 2 has the last month of each quarter and should be used to find the end date.
I need to find the first value from left to right and return the date directly above it in row 1.
Then....
I need to find the last value in the step chart and return the date directly above it in row 2
Example
Start Date..A...B...C....D...E...F
End Date....U...V...W...X...Y...Z
Value-1...........5...2....7........
Value-1
Start Date: B
End Date: X
Duration: = B - X
The reason i need this information is to create a Gantt Chart.
I have all my data on sheet 2 which contains tables that relate to information on regions, manufacturers, etc so it can be a large amount of tables which will change from month to month depending on a monthly list.
For example, if “Region 1” is in cell B134 – the resulting data I need to pull out will be contained in C138:G232 ...or ”Region 2” which is in B235 – table info is in C239:G333, etc, etc.
On sheet 1, I have a cell (L7) that is populated by another formula. This cell is effectively my lookup to pull out information from sheet2 to populate cells in (sheet1) AE119:AH212 - same sheet as the reference (L7).
I need to look up the reference/resulting value that is in L7 on sheet1, find and match against the values in column B on sheet 2 and then pull in the corresponding table information.
If the value in L7 was not changing at all I could do.. in cell AE119… =OFFSET(sheet2!B134,4,1,1,1) etc etc
... but I am at a loss as to the value in L7 changing and incorporating a lookup… or maybe I am looking at it wrong..?
I have looked up match, offset, index and lookups on the forum and have managed to confuse myself even more. I have even tried taking some of the example formulas and amending with my references but to no avail.
I have 2 columns of data (col A is time, col B is a value), in a range A4:B1000 (can be less, but the biggest the range will get is to B1000). Example:
A / B
4 10:37:55 / 91
5 10:37:56 / 92
6 10:37:57 / 93
7 10:37:58 / 100
8 10:37:59 / 105
9 10:38:00 / 110
10 10:38:01 / 111
11 10:38:02 / 115
12 10:38:03 / 120
Im looking for a way in VBA to look for a time entered in cell C1 (example 10:38:00), find that in column A, then return the average of values in column B that are offset 271 - 300 rows. This is entered in D1. So in my example, 10:38:00 is in cell A9, return the average of B280:B310.
The main worksheet in my workbook contains lists of suppliers with unique Vendor Numbers, of which there are approximately 4,500 rows. There is another worksheet which holds approximately 6,500 entries I need to bring data from that sheet to the main sheet using the Vendor Number and the information that is held on 4 columns unique to that number.
The information is a classification system that comprises of 4 columns holding a mixture of numbers and text.
Worksheet 1 has the Vendor Number in Column A and the Classification destination starting in Columns Q, R, S & T.
Worksheet 2 once again has the Vender Number in Column A, and the Classification information in Columns C, D, E & F.
What I need guidance on is how to build the formula to copy the information across, or direction into what other method I should be looking at instead.
In the attached spreadsheet you will see the table of data in cells e6:L16. In cell N6 i am doing a hlookup to find the date in the table of data that is closest to the date in cell A4. The formula in cell M6 is where i am having the problem and i was trying to pull in data that is 4 columns to the left of where the hlookup date is in cell N6. The problem i am having is when i input any date higher than 06/30/07 the Index formula does not display the correct date. What is confusing me is that the Hlookup formula in cell N6 still works with higher dates but the index formula does not.
View 6 Replies View RelatedI'm trying to use an offset from a Named Range as my source cell in a vlookup but get a -1004 Object not defined error. When Debugged the Range.Formula appears to be blank when queried. Using Record a Macro the Reference to a named range worked fine but I could not test for an offset or the use of the range reference. What can I do to use to make this work
Range.Formula="=vlookup(Range(""SomeName"").Offset(1,0),DataRange,2,False)"
I have done a search and I think this is possible but just can't convert any of the examples to work for me.
This is the calcuilation I would normally enter -
=VLOOKUP(A80,'[CF227.xls]Sheet1'!$A$9:$J$9,10,FALSE)
However I don't want the cell 10 rows across when a match is found I want the figure 10 rows across and then 2 rows down from that point. i.e. if the match is in row A9 I want to return the figure in J11.
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
I am trying to find a formula that would pick out a row from a matrix based on the values in the first column and then return to me each of the subsequent values from that row. I can't do a vlookup because there are a lot of blank cells and which columns have data changes. I've attached an example. The text in A1 will change and cells A3:B5 will show the corresponding values from that row along with the column title. I would prefer a formula to type in and leave in cells A3:B5 but if that can't be done VBA is okay too.
View 6 Replies View Relatedgiven a range named xyz which refers to d1:e3
range("xyz")
where the 3rd row is blank. I want to examine the row after the range with
range("xyz").end(xlUp).Offset(1,0).Cells(1,1).value
I find that this code refers to the last row of the range which is blank. How can I be sure that I will be 1 row (offset=1) below the range?
Below is a table of data I am trying to sum. In the first column, is the account code, second column has the Hotel number code, third column is the description and the 4-6 columns have amounts for March, April and May.
I am trying to sum the data for March, April and May for account 107000 using this formula, but it is only picking up the first row.
=-IFERROR(SUM(OFFSET(PnL!$C$9,MATCH($A29,INDEX(PnL!$A$10:$A$500,0),0),1,1,ControlMonth)),0) to sum
FYI:
PnL!$c$9 = is the block referred to as C9 below
$A29 contains 107000
PnL$A$10 is the block below A9 below
ControlMonth is currently set to 3
[code].....
I have sheet1 with four columns. Team, Issue, Discussion and Recommendation. Discussion and Recommendation headings were placed in column B along with the data in the file I was sent. I need to get it back into table format to eventually load into Access. What I'm trying to do is to loop reading down column B. When I find the word “Discussion” (exact format) I need to drop down one row below the word, cut whatever is in the row, move one column to the right, Column C, and two rows up and paste. For example, cell B3 has “Discussion”. I need to drop to B4, cut whatever is in the cell and move to C2 and paste. I also need the same to happen for Recommendation. Find the word, drop down one row, cut whatever is in the cell, move two columns to the right and up four rows. I would like to delete the rows I moved data from, but will do that by hand if it’s too hard to do in a macro.
An example of my data:
TeamText
Design4. Reuse existing code to extent possible.
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignEstablish a baseline and work to the plan.
Design5. Delete old code
DesignDiscussion
DesignNo discussion
DesignRecommendation
DesignNo recommendation
Design6. Plan to work without full details.
DesignDiscussion
DesignIncremental design
DesignRecommendation
DesignWork on smaller details first
Sub Discussion()..................
I have a name which uses the formula
=OFFSET(Query!$F$1,0,0,COUNTA(Query!$F:$F)+1)
That populates a dropdown
However I want to exclude hidden / filtered rows?
Iv'e tried sumtotal etc but didnt get any results. I'm after using the rows as options.
I need an OFFSET function to start off by moving down 1 row from the starting point and then on the next run through the loop, to move down 2 rows, then 3 rows, etc.
Code:
Workbooks(Thisname).Worksheets("Run Set Up").Range("Duration").Offset(1, 0).Value = Workbooks(Filename2).Worksheets("Front Page").Range("T20").Value
This is what I'm working with. At the moment, I have the value for the number of rows to move set to 1 because I can't figure out how I'd accomplsih what I need.
I'm using Excel 2003. The sumif function will not allow me to ignore hidden rows in my data set that have been autofiltered. I tried using the following formula and it worked:
=SUMPRODUCT(SUBTOTAL(3,OFFSET(CopiedB!$I$2:$I$65000,ROW(CopiedB!$I$2:$I$65000)-ROW(CopiedB!$I$2),0,1)),--(CopiedB!$A$2:$A$65000=$A22),CopiedB!$I$2:$I$65000)
The problem I am having is that the sumproduct and offset funtions used to ignore hidden rows are considered "volatile" and force a recalculation. Moreover, I have this fomula pasted 100+ times and this dramatically slows things down even when I turn autocalculate off. Is there another way to accomplish a sumif with a user defined custom function in VB? I really need to have the ability to do a sumif that ignores hidden rows and is not dramatically slow.
i have a range of cells which is nxn where n>1. i want to place a header 2 rows above this range which is aligned on the left. this is what i tried:
View 3 Replies View RelatedI am having some difficulties using a combination of IF and the OFFSET function to display a range of cell values from another column based on a simple condition. The values I need to display at the destination cells should be offset by 8 columns to the right and "X" rows down from the reference column. The value "X" is to be determined via the IF function to check for the row index number.
For example, if Index value "X" = 8, then display the value of B2 in cell I9. IF X = "9", display B2 in cell I10 etc.
I have attached a sample worksheet that provides some examples.
I am trying to find a macro that can search a sheet for any cell that contains the text "Not on AOI" selects a range that contains that cell, 81 rows below, and 2000 columns to the right, then cuts the selection and pastes it 162 rows below the original cell where the text was found. What's hard is that the number of columns between the "Not on AOI" cells is variable.
I'm very new to excel macros and the parts I think I've put together are:
Cells.Find("Not on AOI", After:=ActiveCell, LookIn:= _
xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _
xlNext, MatchCase:=True).Activate
[Code].....