Lookup To Return Multiple Values And List Sequentially
Mar 17, 2008
I need to lookup data based on a cells content. The answer has to output to a table as a sequential list. I have attached a sample workbook (there will be 100+ sheets in the final version!). The Register sheet lists competencies against page# and title. For each Evidence Sheet I need to populate the Competency grid (C4:D10) in a sequential manner i.e. no blank lines,and the Title (B13) based on the Page # (D2). I have looked at a great number of postings, but cannot see a solution that fits.
Input date on left column and the cell on right will automatically look up this date from the list located in other spreadsheet and return multiple corresponding in sequence order? Once another date is entered on left column, it will do the same function again on right column?
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
Is there a way to use a lookup formula to return all values of a given text, not just the value of the first listing of the text. In an attempt to clarify my already confusing request, if A5 on "worksheet1" is "Land" I want E5 on "worksheet1" to return the summation of values assigned to "Land" "worksheet2" "column B" any time "Land" appears on "Worksheet2" "Column A".
I am wanting to use a vlookup or perhaps an array(?) to bring through multiple cell values based on being the maximum value. So say there are multiple employees (all with unique ids) under one manager (also with unique ID), I want to find the employee with the highest value in a particular column and return that employees details, such as name, employee number and the value itself, which are all in the same row. I have attached a basic example of the data involved.
In the attached sheet, I want to look up values from table (A1:G5) and then for each occurrence of a particular number, return the value in the same row in column H, and sum when there are multiple values (see green shaded area for desired output. For example, the number 8 occurs in E3, E4, and G5. I want to return the sum of the corresponding values in column H (1,5, and 2). I've spent hours trying to work this one out, I'm sure this is probably an array formula, but I can't manage to make it work.
the formular that i have in the attached file is returing all the customer numbers Is it possible to return only one value of each the data is in the "data" sheet and the formulars are in sheet1
Use a referenced lookup value from sheet "A", to return values, from several columns in sheet "B"
Things to note:
a) The lookup values sometimes repeat. I need all the associated values with each repetition as well.
b) The lookup values in sheet "A" are a comprehensive list, sheet "B" also contains some of these values but not all. Essentially, what I need to do is find a way to lookup each value in an account numbers column in sheet "A", against a different account numbers column in sheet "B".
If that value occurs in sheet "B" I want it to return the values from Columns X, Y, Z, (I want these values returned in sheet "A".
If that value does not occur in sheet B, the corresponding cells should remain blank.
If the lookup value occurs multiple times, I need all the corresponding values from each of X, Y, Z columns.
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
I have a worksheet containing a list of states in column A and a list of companies in column B (along additional data in columns C-L). I want create a lookup formula on a separate worksheet where users can select the state from a dropdown menu and it will return the information from columns B-L for that state.
For example:
A B C D Alabama ABC Company Active Expires December 2009 Alabama 123 Company Expired Expired April 2008 Alabama XYZ Company Active Expires August 2009 Alabama Larry Company Expired Expired May 2006
How can I do this without losing my mind? I've tried various Index, Small and Match formulas and none of them work.
I am using the below array formula in G2 (that I then drag across) to show the score for all the times "mike" appears. I would like to match all the times "mike" OR "red" appears, so that the value in K2 is "99".
I have a worksheet where data has been entered from a userform. For each entry, there is a separate reference number in the form of contract number-schedule number-machine type-cage number (e.g. 123-123-ABC-1).
The machien type will not always be known so the user will need to do a search for the contract number-schedule number and then bring up all the possible reference numbers.
For example this could look like: 123-123-ABC-1 123-123-ABC-2 123-123-CDE-1 123-123-CDE-2
I would like this list of all possible values to pop up.
what look up function would work and how I can do this?
I have a file with multiple sales for each product, each month it can change depending on sales and i want to get the total of each product. As the range is not defined this is where i am stuck. I want the total for each product based on the product name or cell reference.
Logic: Look through range and sum total each product equal to "A2" for example.
At work I have a spread sheet that I used to track material shortages by part number. So in column A of the spread sheet there is a list of part numbers that have shortages, column E contains a list of all sales orders that are affected by the shortage separated by a comma. I am trying to setup a query sheet where I input a sales order and get back a list of parts that are short for that sales order(basically reversing the original list to be by sales order instead of part number). The number of values in column E varies, sometimes a cell will have 1 value, sometimes 20+ and anywhere in between.
Example Sheet: A B C D E
123
012
234
789, 567
465
789
890
012
I'm already got a INDEX/MATCH that would show both shortages for sales order 012. But I can not figure out how to get the shortages for 789 or 567.
I'd like to do is to use loops to copy each value in "Sheet1" into every other row in column B of "Sheet2" starting on row 16. I realize that this is a simple task, but I'd like to know how to do this for the purposes of learning the correct VBA coding.
I am trying to work out how I can assign a sequential value to sets of duplicate data within a list. i.e. where I have duplicates in a list I want each of the duplicates (that are in the same set) to have a sequential number assigned and for that to start from 1 each time it discovers a new set of duplicates.
RED GREEN YELLOW PURPLE RED ORANGE BLACK GREEN RED
Where a colour is duplicated in the list I want it to have a sequential number assigned. When a new set of duplicates is found the numbering starts from 1 and sequentially increases. So the above data list would resulting in the following output
RED 1 GREEN 1 YELLOW PURPLE RED 2 ORANGE BLACK GREEN 2 RED 3
Have tried variations of the RANK function, but not sure how to get the sequential nu,bering to restart with each unique set of duplicates. I would also like to do this without VBA if possible using the built in functions.
I have a column of week numbers but some gaps in the list (e.g. the job is complete and so I do not want to reference it) I am trying to create a list of jobs by week number. I need to sequentially number jobs to then use Vlookup e.g. job1-week1 job2-week1 etc to display be week.
I can work out to number the list ignoring the blanks but then resetting to 1 with each new week?
I have a problem with the formula that lookup all values in ascending order and returning all the corresponding values. eg: I was intended to lookup for the value in ascending order under the Total Occurrence and returning all the corresponding value under the Nos Group but encountered the same Nos Group was returned when there is same value appeared under the Total Occurrence.
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
We have these worksheets that have 100 tabs each each tab is named joel_1400, joel_1401...Joel_1499 insert data in each tab template as needed for RFI's. then we have to make another worksheet with 100 tabs for 1500 to 1599
what we are doing is copying the whole worksheet and then erasing all of the user fields and changing all of the names manually for each tab
Suppose I'm a grocer and I use a spreadsheet to track my inventory. I sell fruits, vegetables, and dried spices. On one worksheet in my Excel file, I create the following lists:
FRUITS VEGETABLES Apple Potato Orange Celery
[Code]...
Then on a second worksheet, I have my actual inventory, which is this:
ITEM QNTY PRICE CLASSIFICATION
[Code]...
I need a formula for the "Classification" cells of the Inventory. For each "Classification" cell, I want the formula to do the following: Search for the corresponding "Item" in the "Fruits" list; if found, then put "FRUIT" in the Classification field.If not found, search for the corresponding "Item" in the "Vegetables" list; if found, then put "VEGETABLE" in the Classification field.If still not found, put "SPICES" in the Classification field.
So using my toy example:
The formula for the first row would search for "Banana" in the "Fruits" list. Because the desired text sting is found, the formula enters "FRUIT" into the Classification field.The formula for the next row would search for "Cucumber" in the "Fruits" list. It would fail to find it, so then it would next search the "Vegetables" list. Because the desired text sting is found there, the formula enters "VEGETABLE" into the Classification field.The formula for the next row would search for "Dried Oregano" in the "Fruits" list. It would fail to find it, so then it would next search the "Vegetables" list. Because the desired text sting is not found there, the formula enters "SPICES" into the Classification field.
If Excel can handle this level of automation, but I suspect there must be a way to do this.
(1) I've created a list in A2, which looks up F1:F27. I'd like to place an IF or Vlookup function in B2, that returns the corresponding cell from range G1:G27 based on selection in A2.
(2) Also, is it possible to include the fill coulour based on selections in A2 and B2?
I am trying to create a quotation spreadsheet and want the drop down list to contain the materials but once a selection is made in the drop down list, i want other cells to be accordingly populated with data stored on another worksheet within the workbook.
The source of the drop down list is material and i need other cells to be populated with the adjacent data.
Here is a small list i have at present, which will be much larger when completed.
MATERIAL 20mm 30mm Absolute Black £62.15£83.30 Absolute Black Premium£71.65£96.10 African Red £58.20£78.00
So if the selection in the drop down list is African Red then it should accordingly populate other cells with the values £58.20 and £78.00. Please help as i have tried many sources elsewhere but without any luck and this would be very benficial.
I have a problem with the formula that look up multiple records with the same values and return multiple corresponding values in ascending order. I am using Excel 2003 and it is a bit complicated to explain so I have attached a sample spreadsheet to show what I mean.
What I want was after I have sorted the occurrence value in column E based on column B and I want to correspond the Rank in column D based on column A in ascending order for the same occurrence value in column E.
Eg: There is two occurrences for number 1 at E3 and E4, and three occurrences for number 2 at E5, E6 and E7 in column E. Then the Rank for the first occurrence for number 1 in D3 should be ranking 6 and the second occurrence for number 1 in D4 should be ranking 7, so the Rank for the first occurrence for number 2 in D5 should be ranking 3, D6 should be ranking 4 and D7 should be ranking 9 based on column A and B, etc.
Hi there, please can you help me transfer data from 1 spreadsheet to another (I have attached a file which has 2 sheets).
I am trying to populate columns G to L (sheet B) with data from column H (sheet A) - the lookup is between 'Material' & '7410','7090','7680','7060','8630','7580' on sheet B & material & plant on sheet A.
I have tried H&VLOOKUP & INDEX/MATCH but I keep returning a #N/A..
