I need a formula that will return a range of values from a list.
Example: I need a formula in cell A2 that looks at the list and will return all numbers that are >99 but 199 but299 but
I am trying to build a logical formula and it turns wrong values. I have four criteria in numbers, the codes are: 1 invoices, 3 credits, 7 Debits, 8 Returns, 9 Payments. All of these codes have positive numbers. I am trying to convert "credits", "returns", "payments" in negative . the rest "invoices" "debits" stay positive. In column A i have dollar values all positive, column B "codes" mentioned above, column C "i want to put the correct values.
View 9 Replies View RelatedI am trying to create a logical test with three possible results:
h2 <10.2 "needs improvement"
(if false) h2=10.2 "meets standard"
if false h2>10.2 "exceeds standard"
Basically, I am referring to a cell to determine if it meets, exceeds or does not meed a specific standard. In this case 10.2.
Under what conditions does a simple logical test, like
View 5 Replies View RelatedHere is the formula I am trying to write:
=IF(A21=(VLOOKUP(XX52,AN24:AN52,0,V38),V45,0)
The above is in cell X45
This does not work, but this is what I want it to do:
I have a list of text, if cell A21 equals a range in that text then I want the cell to return whatever is in Cell V45, if A21 does not equal within the range of text, then I want it to return a zero in cell X45.
You can see that I tried using Vlookup as the logical test, but I am not doing something right or vlookup cant be used that way.
I have a spreadsheet where I have a list of patients who were evaluated on a certain date unique to that patient. Some of the patients have a subsequent date of death, and some do not (they're still alive).
I need to create a logical test which indicates whether or not the patient died at specific intervals after their unique evaluation date-- at 3 months, 6 months, and 12 months. Additionally, I need to measure whether the patient died at 0-6 months, or 0-12 months, or is still alive.
In other words, if Patient A was evaluated on 1/1/2008 and subsequently died on 10/31/2008, I need to do a logical test that says 3 months = false (no death), 6 months = false (no death) and 12 months = true (death). True = 1 and False = 0 (so I can do a simple column add to figure out how many died at each interval). Additionally, for the 0-6 month test it should calculate = 0, but for the 0 - 12 month test it should calculate = 1.
I'm totally stumped as to how to do this. Currently my spreadsheet reads as follows: (I've put ** next to cells that I need formulas to calculate. If no **, assume it's a value I've inputted manually)
A1 = Patient number (numerical order)
B1 = Patient Initials
C1 = Initial Evaluation date
D1 = Date of death (if any- blank if patient is still alive)
E1 = Patient death indicator (1 = dead, 0 = alive)
F1** = Indicate whether or not patient died within 3 months of evaluation (1 = dead, 0 = alive)
G1** = Actual date of death within 3 month interval
H1** = Indicate whether or not patient died within 6 months of evaluation (1 = dead, 0 = alive)
I1** = Actual date of death within 6 month interval
J1** = Indicate whether or not patient died within 12 months of evaluation(1 = dead, 0 = alive)
K1** = Actual date of death within 12 month interval
L1** = Did patient die within 0-6 months of evaluation? (1 = dead, 0 = alive)
M1** = Actual date of death within 0-6 months
N1** = Did patient die within 0-12 months of evaluation? (1 = dead, 0 = alive)
O1** = Actual date of death within 0-12 months
I have data in column A. The data contains a name, an underscore and initial/s. For example: rebecca_rt, john_j, etc... I'm trying to pull only the characters to the right of the underscore. I played around with the below formula that I found under a similar question thread. But, it doesn't quite work. As it is now, it returns ecca_rt when I just want rt. I'm sure this is probably really close =IF(ISERROR( FIND("_",A1)),A1,RIGHT(A1,FIND("_",A1)-1))
View 3 Replies View RelatedMy logical test is =IF("D2"="E2",1,2). When I autofill or copy down, the row numbers do not change to "D3"="E3", etc. How do I delineate text and also have the ability for autofill or copy to change the rows as it goes?
View 2 Replies View RelatedBasically I have a column (lets call it column A) whereby I manually fill the cells green once I have received some documents, another column which has a numeric value in it (column B) and I want to create a third column which basically just copies column B but ONLY if column A is filled with a colour (actual colour doesn't matter cause I only use green)
I tried using the IF function but I don't know how to use cell colour as the logical test
I'm trying to create a formula that will determine the bonus (%) for sales made. Here's the table:
<10000 sales = 0% bonus
>=10000 sales but <=29999 sales = 5% bonus
>=30000 sales but <=to 44999 = 7% bonus
>50000 sales = 10% bonus
Since the sales and bonus figures are subject to change each year I'd like the formula to point to the numbers but that part seems easy if I can get the formula right.
I'm trying to use the following formula to verify if the "," is within a cell. Something is not right, because even for True conditions, I'm getting a False return. I think my True logical test is not written right.
View 3 Replies View Relatedexcel 2007. Here is the situation:
I am using the Index and Match function to lookup for two specific criterias in a different worksheet. So far, it is working well, but it gets complicated. I want to look for the criterias in 6 different worksheets based on what a certain column is saying. Here is an example:
A
B
C
D
[Code].....
So, if the continent is Asia in the column A, I want Excel to look in the Asia worksheet for the city and the venue and return me the contact information. Same, if the continent says Europe, I want it to look in the Europe worksheet or the city and the venue and return me the contact information. So on and so forth.
The formula I have at the moment is this:
{=INDEX('Asia'!$1:$1048576;MATCH(B3&C3;'Asia'!D:D&'Asia'!E:E;0);9)}
How do I incorporate the logical test for it to look for the proper worksheet knowing that all my continent worksheet have the same structure?
I have a file with multiple sales for each product, each month it can change depending on sales and i want to get the total of each product. As the range is not defined this is where i am stuck. I want the total for each product based on the product name or cell reference.
Logic: Look through range and sum total each product equal to "A2" for example.
I need to lookup data based on a cells content. The answer has to output to a table as a sequential list. I have attached a sample workbook (there will be 100+ sheets in the final version!). The Register sheet lists competencies against page# and title. For each Evidence Sheet I need to populate the Competency grid (C4:D10) in a sequential manner i.e. no blank lines,and the Title (B13) based on the Page # (D2). I have looked at a great number of postings, but cannot see a solution that fits.
View 7 Replies View RelatedI am trying to determine Long Term Gain (LTG,) Long Term Loss (LTL,) Short Term Gain (STG,) Short term Loss (STL,) or No Loss nor Gain (NGL)testing two cells (A1 and B1)and setting a third cell (C1) to the text LTG, LTL, STG, STL, or NGL depending on the results of testing cells A1 and B1.
A1 represent a number of years and B1 represent gains or losses (negative)in dolars.
The way I see the logic is as follows:
If cell A1 or cell B1 are either one of them equal to 0, then it is neither a Gain nor a Loss (NGL.)
If cell A1 is greater than or equal to 1, then it is Long Term; else, if A1 is greater than 0 and less than 1, then it is Short Term.
On the other hand, if cell B1 is greater than 0, then it is a Gain; if B1 is less than 0 (a negative number,) then, it is a Loss.
I need to find (if it is posible in Excel) one formula to test the two cells for posible outcomes:
If A1 = 0 then C1 = NGL
If B1 = 0 then C1 = NGL
If A1 >= 1 and B1 > 0 the C1 = LTG.
If A1 >= 1 and B1 < 0 the C1 = LTL.
If A1 < 1 and B1 > 0 then C1 = STG
If A1 < 1 and B1 < 0 then C1 = STL
I need to multiply an array of logical results ( returned as {1,0,0,0,1,0 et.}) with a text array (a reference column) and return the text in the reference column in case the value in the logical array is 1.
View 3 Replies View RelatedI am trying to look & match key values from 2 areas of one table with two areas of another table; in turn, it'd return one value based on the lookup table...
Attached worksheet : Test booklet.xlsx
How to find whether a particular cell is blank or is text in a given row/column?
To elaborate more, I have some data in a row:
A B C D E
15 N 16 17 18
I am using a below formula to find whether there is any text in the row
ISTEXT(row(A1:E1)) but I am getting result as False.
I have attached sample sheet.
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
I want my IF function to populate two cells with two values if argument for IF function is found TRUE. Is it possible?
IF(logical_test, [value_if_true], [value_if_false])
value_if_true = return multiple values in mutiple cells (for example put number 8 in cell A2 and number 10 in cell A3 if function is TRUE)
How would I do that? I tried putting IF(logical_test, (A2="8",A3="10"), [value_if_false]) but it is not possbile...
I have a bill of materials with a description column. I want to search that column for various words (ie. wheel, screw, spacer, shelf, etc) and return a value into another new column depending on that value (wheel inputs wheel, screw inputs hardware, spacer inputs hardware, shelf inputs shelf).
How Excel shows you how to search will only return one value because I can't use an else statement:
I am trying to get more than one outcome from a logical function in a single cell. I am teaching a class and i want this particular cell to add up all the points from tests and quizzes and then give me an outcome of a grade (A,B,C,D, or F) Right now i can only get the cell to give me an outcome of A or B. I need the cell to be able to give me 5 possible outcomes (A,B,C,D,F).
Right now i have this formula in this particular cell......=IF(Q6>234,"A")......so if Q6 is greater than 234pts they get an A...if not they get a B. How can i also give ranges of total points to have the cell give C,D, or F?
I'm trying to work out some code that will take the contents of a cell (either alias or IP name), carry out a ping operation and return the result into the worksheet in the next columns to the right.
I've searched this site and found something similar that returns the result of the ping to a MSGBOX but this isn't quite what I want.
The endgame is to have a For/Next loop for a list of IP addresses in (say) A1:A10 and have the results pasted into columns B, C and so on, with each line of the ping result pasted into subsequent columns.
I am having trouble evaluating two conditions with nested logical operators to produce the output I need.
For example Condition 1 has 5 choices (A,B,C,D,E) and Condition 2 has 3 choices (a,b,c).
Breaking it down,
[Condition 1] option "A" always applies and should give "Yes" (No matter [condition 2], "A" always gives "Yes")
[Condition 2] option "c" always applies and should give "Yes" (No matter [condition 1], "c" always gives "Yes")
[Condition 1] option "D" never applies and should give "No" (No matter [condition 2], "D" always gives "No")
[Condition 1] options "C" and "B" only apply if [condition 2] is "b" (if so, the answer is "Yes")
What I need is the equivalent of:
if ((([condition 1] == A) || ([Condition 2] == c)) || (([condition 1] == B || C) && ([condition 2] == b)), "Yes", "No")
Basically, I'm trying to calculate a pooled z-score from z-scores already stored in different cells.
Each individual z-score are calculated like this :
D1=IF(A1=999,999,((A1-10)/3)).
They are derived from standard scores with a mean of 10 and a SD of 3. I use 999 to mark missing values and this work flawlessly for single z-score cells.That way, if A1 is a missing value (999), Excel returns a value of 999.
Now here's my problem. How do I tell Excel to ignore 999 values if I am pooling multiple z-scores together?
Let's say A1, B1 and C1 are single z-scores. I want D1 to be the pooled z-score result, but I want it to ignore A1,B1 and/or C1 if their value is 999. For instance, if A1=+2.0 , B1 = 999 and C1= -1.50, I want my D1 cell to ignore B1 in the calculation.
I've tried : D1=IF(A1,B1,C1=999,999,(LC5+LI5+IK5)/3)) but it sure doesn't work...
I have created a drop down list of various material sizes what I am needing to do is to select a material size from the drop down list and a corresponding value is input into the cell. So on say sheet two (Data Sheet) I have Cell A1 25x25 with Cell B1 100, Cell A2 30x30 with Cell B2 120 and so on. On sheet 1 Cell A1 has my drop down list being the material size ie 25x25, so what I need to happen is if I select 25x25 then Cell B1 is 100 or if I select 30x30 then cell B1 is 120.
View 4 Replies View RelatedI have a list of data that I want to average the number in column B when there is a match in column A
COLUMN A | COLUMN B
alpha | 100
beta | 200
gamma | 300
alpha | 400
beta | 500
What I'm looking to do is return the MEAN of values in column B where column A = alpha. Though, I would settle for returning a list of the values that match the criteria. Index/Match combinations don't seem to be helping me because they only return the first match, I'd like to return all matches.
I am looking for a formula which will return the names of in Column A where Column B is equal to 0.
ColumnA
David ColumnB
0 Joe 0 Susan 1 Steve 2 Janet 0 Bonnie 8 Emma 8
How to write formula of following condition:
Input date on left column and the cell on right will automatically look up this date from the list located in other spreadsheet and return multiple corresponding in sequence order? Once another date is entered on left column, it will do the same function again on right column?
I have a workbook with multiple sheets in it. One sheet is an Overview sheet, and the others represent the months (JAN, FEB, MAR, etc). On the Overview sheet, I have a few columns of data set up that I need to retrieve from the various sheets within the workbook. The thing is, this data can occur more than once on any particular sheet and it's very likely to occur multiple times throughout the workbook. For example, compressor #1 was blown down on January 1, January 15, February 5, February 9, February 12, April 22, and so on. Compressors 2-5 were also blown down multiple times throughout the year, as well as various other equipment that I have listed out throughout the numerous monthly tabs. On the Overview sheet, I have the columns Equipment, Date, Temp, Begin PSIG and MCF Loss. I'm needing to get the information from those tabs into these columns.
I first tried a simple VLOOKUP. After all, it's worked for so many situations similar to this, why wouldn't it work here? I quickly found that it won't work here because I need to return multiple results, not just the first one it comes across.
When I copy the formula down it seems to return the same results in every cell, not the next result, and the next, and the next, and so on.
