I am trying to enter a value in cell F1 by comparing the values in cells A1,B1 & C1. By using 'if, and, or' functions I can automatically input a figure for a limited number of values in A1 to C1. What I need to do is lookup from a database for say 10 possibilities in A1, five in B1 and 35 in C1 returning the correct number for the combination in F1.
View 4 RepliesI have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
I have attached sample sheet.
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
I am using the below array formula in G2 (that I then drag across) to show the score for all the times "mike" appears. I would like to match all the times "mike" OR "red" appears, so that the value in K2 is "99".
=INDEX($A$2:$C$9999,SMALL(IF($A$2:$A$9999=$E2,ROW($A$2:$A$9999)-1,"hh"),COLUMNS($G2:G2)),2)
A
B
C
D
E
F
G
H
I
J
K
L
1
name
score
color
[Code] ..........
How the following problem gets sorted out
ColumnAColumnB ColumnEColumnF
33rohan55
44tata55
55dev44
55rony33
As you can see from above i want to lookup all the values in column E in column A and return the corresponding value in column F.
I have a table where the rows are conditions and the columns are experiment numbers, as an example below:
Experiment 1
Experiment 2
Experiment 3
Hardness
X
X
Solubility
X
X
Density
X
X
The table is fairly large. What I would like to be able to do is use a lookup/formula that will return all the experiment numbers a given condition is tested in. In other words, for a given condition (i.e., Hardness), which columns have an "X". Not sure if that can be done with a lookup or not or if there is another function necessary. I would like to be able to do it without macros though and also have it automatically update if I move the "X" around to different experiments.
I have a huge document that looks like this. This is only one part of roughly 2500 lines
blank
Original Budget
Previous Estimate
Estimate Actual
Actual Costs
[Code].....
My problem is that I need to extract Soft committ and actual cost for each element (this case its TPS658). What really makes the problem for me is that I only want cost for cost place 230, 250, 300, 350 (only 350 shown here). Not the total that is shown in the row for element name.
Is there a way to use a lookup formula to return all values of a given text, not just the value of the first listing of the text. In an attempt to clarify my already confusing request, if A5 on "worksheet1" is "Land" I want E5 on "worksheet1" to return the summation of values assigned to "Land" "worksheet2" "column B" any time "Land" appears on "Worksheet2" "Column A".
View 2 Replies View RelatedI'm trying to return the next unique item in the list of partnumbers. The count column indicates that there are that many instances of that part number. I then populate down than many to VLOOKUP the value "count" number of times. The formula I am using to get the MFR code compares the pn to the one above it. If it matches, I want it to return the MFR offset by the one above it for that part number.
Source data: (will alwyas be sorted by part number, then by MFR)
Part NumberStock num NAME MFR
BDEGHS55555544333RIVET,BLIND53551
BDEGHS55555544333RIVET,BLIND92215
BDEGHS55555544333RIVET,BLIND98996
BDEGHS55555544333RIVET,BLINDC4293
Results:
CountPart NumberMFRStock numNAME
4BDEGHS5555355155544333RIVET,BLIND
4BDEGHS5555355155544333RIVET,BLIND
4BDEGHS5555355155544333RIVET,BLIND
4BDEGHS5555355155544333RIVET,BLIND
I want the first vlookup part of the formula to return the NEXT MFR code in the source data.
how do i lookup values when there are multiple matches and i want to return values horizontally
eg
column A Column B
A 1
B 2
C 3
A 4
B 5
C 6
D 7
D 8
D 9
D 10
and the output should be like:
column A Column B Column C Column D Column E
A 1 4
B 2 5
C 3 6
D 7 8 9 10
I am trying to use a lookup to find the quantity of a certain fabric. However, more than one style uses the same type of fabric. Is there a way to do a lookup that retrieves multiple values?
View 1 Replies View RelatedI'm trying to do the next level of a v-lookup. I have a group of data with a text "flag" on certain rows. On my summary worksheet, I'm trying to do a lookup or a nested index function retrun all of the values with the text flag next to it.
I've been playing around with nested formulas and this is where I'm stuck. Here's what I came up with:
=INDEX($D$1:$E$9,(SMALL(IF($D$1:$D$9=$A$1,ROW($D$1:$D$9),ROW(1:1)),ROW(1:1))),2)
This only works for one row and not for the other rows. Maybe I'm going down the wrong path?
I have a giant lookup table with five columns. I have three variables, and I need to find the row in the lookup table where the variables match the first three columns of the lookup table. ie. Find the row where variable 1 matches the value in column 1, variable 2 matches the value in column 2 and variable 3 matches the value in column 3. If this row exists then return the value in columns 4 and 5 of that row. Otherwise, return a zero.
View 4 Replies View RelatedI want to lookup values from one rawdata worksheet and have values appear on another sheet, but using 3 lookup values as the criteria. I cannot do this function with Vlookup as it only takes one criteria. I have looked for similar threads in this forum and came across an Index/Match function, but I cannot get it to work. I am attaching file. The data is in the 'rawdata' worksheet. I want values to appear in 'Input' worksheet, grey area using the 3 criterias (Dept number, GL number, and Seg code number).
View 4 Replies View RelatedI've search several posts and can't figure this out. Have sheet1 with facility number (A) and Description (B), monthly budgets (C-N) and yearly total at O. Each facility has 400+ GL so the only formula that has come close to working is this one: =INDEX('sheet1'!$O$1:$O$7695,MATCH(1,('sheet1'!$A$1:$A$7695=$D8)*('sheet1'!$B$1:$B$7695=G$5),0))
Basically "O" is the yearly number I want, "A" is the facility number and "B" is the Description (which is text). After searching several posts this one returned a result on the first facility, but returned NA on the rest. Also tried CONCENATE function with A&B in sheet1 which are equal to D10&G5 in sheet2. It returned the wrong information, I was looking for "1506Net Sales" and it returned for "1506Net Income".
I am wanting to use a vlookup or perhaps an array(?) to bring through multiple cell values based on being the maximum value. So say there are multiple employees (all with unique ids) under one manager (also with unique ID), I want to find the employee with the highest value in a particular column and return that employees details, such as name, employee number and the value itself, which are all in the same row. I have attached a basic example of the data involved.
View 8 Replies View RelatedIn the attached sheet, I want to look up values from table (A1:G5) and then for each occurrence of a particular number, return the value in the same row in column H, and sum when there are multiple values (see green shaded area for desired output. For example, the number 8 occurs in E3, E4, and G5. I want to return the sum of the corresponding values in column H (1,5, and 2). I've spent hours trying to work this one out, I'm sure this is probably an array formula, but I can't manage to make it work.
View 3 Replies View RelatedI have a sheet, called "output", in which I need to complete column C "calculated values". I need to complete the table based upon a formula table (which is in sheet "formulas").
For the first row of data, cell C2, I need to take the price per order ($0.25; cell A2) and number of orders (40; cell B2) and copy data to cell B4 and B6, respectively.
Once the data has been copied to to cells B4 and B6 on the fomulas sheet, I need to copy the calculated value in Row N to the output sheet. Note that the value being copied from N can be N11, N12, N13, N14, or N15 (the one that is <> to null).
I have a worksheet where data has been entered from a userform. For each entry, there is a separate reference number in the form of contract number-schedule number-machine type-cage number (e.g. 123-123-ABC-1).
The machien type will not always be known so the user will need to do a search for the contract number-schedule number and then bring up all the possible reference numbers.
For example this could look like:
123-123-ABC-1
123-123-ABC-2
123-123-CDE-1
123-123-CDE-2
I would like this list of all possible values to pop up.
what look up function would work and how I can do this?
language
batch
WC
FC
zh
1
36
0
id
1
0
0
[code]....
in the above table I need to the sum of WC for each Language code & batch no. eg. for Language "id" & batch 1 I need to get the SUM of WC corresponding to the criteria.
the formular that i have in the attached file is returing all the customer numbers
Is it possible to return only one value of each
the data is in the "data" sheet and the formulars are in sheet1
I need to be able to select up to 5 different models in cell A1 from a drop down list then have cell B1 look these values up and find the volumes and then return the sum of the volumes - Cell B1 should read 130. There will always be one model selected but it will vary from 1 to 5 selections.
M1,M3,M4,M5
=10+30+40+50
M1
10
[Code]....
I have below table and want to get new order quantity if the closing stock of a particular product is less than or equal to the ROL after viewing that a previous order of the same product has not been placed within the lead time of that particular product even the closing stock is less than ROL.
Product
Date
New Order
[Code]....
- 1st it match the product with the relevant one
- Then compare closing stock parameter
- Then finally look up the previous order and compare it with relevant lead time
I am trying to replicate a payslip from a list of data on a worksheet.
The list of data contains the employee name, location they worked, and number of hours.
Each employee will work at multiple locations throughout the month, perhaps 10 or so.
The payslip must contain each location worked along with the relevant data, in a list so to speak.
What function can I use to pull this in? Of course if it were one location I would use vlookups to pull in data. As this only returns the top match I would then need a different formula to pull in the second location in the cell underneath?
I'm trying to find a way to:
Use a referenced lookup value from sheet "A", to return values, from several columns in sheet "B"
Things to note:
a) The lookup values sometimes repeat. I need all the associated values with each repetition as well.
b) The lookup values in sheet "A" are a comprehensive list, sheet "B" also contains some of these values but not all. Essentially, what I need to do is find a way to lookup each value in an account numbers column in sheet "A", against a different account numbers column in sheet "B".
If that value occurs in sheet "B" I want it to return the values from Columns X, Y, Z, (I want these values returned in sheet "A".
If that value does not occur in sheet B, the corresponding cells should remain blank.
If the lookup value occurs multiple times, I need all the corresponding values from each of X, Y, Z columns.
I have a list of ID's but in the same list there are duplicates, then I have my consolidation sheet without any duplicates, my issue is that I need to have the contents of a different column for each of the ID's.
Data sheet example
Column A (ID) | Column D (Result)
1111 first
2222 other
1111 second
3333 another test
2222 other two's
1111 third
Consolidation sheet
Column A (ID) | Incident 1 | Incident 2 | Incident 3
1111 first second third
2222 other other two's
3333 another test
Is there any formula/vba which could perform something similar?
I know something very similar was posted before, but unfortunately, it wasn't what I was looking for. I have a Worksheet tracking several associates and the department they have done work in. (Our associates are contractors for other departments). I need to have a final worksheet that allows me to pull up a name, and display every dept they worked with in the past week.
View 9 Replies View Relatedi would like the code that allows me to copy enything I typing in column a sheet1 to column a in sheet2
View 8 Replies View RelatedI have attached a sample spreadsheet which describes my problem.
In C2 and C3 under the first business coalitions column, I have written in text what I would like to be displayed automatically with a formula. The trouble is that, as you can see, Abbott Laboratories is a member of 3 business coalitions. Therefore, a simple vlookup doesn't work because that would only return 1 result.
I need to lookup data based on a cells content. The answer has to output to a table as a sequential list. I have attached a sample workbook (there will be 100+ sheets in the final version!). The Register sheet lists competencies against page# and title. For each Evidence Sheet I need to populate the Competency grid (C4:D10) in a sequential manner i.e. no blank lines,and the Title (B13) based on the Page # (D2). I have looked at a great number of postings, but cannot see a solution that fits.
View 7 Replies View Related