Lookup Multiple Values And Then Compare To Get Specific Result?
Mar 29, 2014
I have below table and want to get new order quantity if the closing stock of a particular product is less than or equal to the ROL after viewing that a previous order of the same product has not been placed within the lead time of that particular product even the closing stock is less than ROL.
Product
Date
New Order
[Code]....
- 1st it match the product with the relevant one
- Then compare closing stock parameter
- Then finally look up the previous order and compare it with relevant lead time
I have a spreadsheet with three years worth of data for a property I manage. Each column has cost data for the year and the specific department/cost for that year as the row value.
I have a column between the years that calculates the percent of gross revenue for the specific department/cost.
I would like to find (or create) a formula that will compare the percentage (or specific cost) for the three years within the specific row and if the increase year over year over year exceeds a trigger value it returns something (check me out/true/false) whatever.
The cost items for the property are in the hundreds so I'm trying to come up with a way to quickly see what specific cost items are going up (or down) more rapidly then what would be considered normal.
I am trying to compare two types of conditions, one that has 3 variables and the other that has 8 variables (each variable has a numeric range), which places the correct result in F6 and F7 of the atatched spreadsheet.
Basically I have two sets of data. One will be new each week. I'd like to use the non-changing data as a base to compare new data to. The formula would need to match multiple values, including a 'time between', and then return whether a minimum rate has been met.
I am currently looking at the workings of a spreadsheet designed by someone else.
First of all i need to know,how these combo boxes are created in the attached sheet,because it cant be edited.in addition to tht in the coloured cell (F17)i'm trying to dereive a formula which is,if (C17 = doll "1"),but its not working.Please someone give me a solution.
I have an excel worksheet that consists of 4 tabs. Each tabs has approximately 60,000 lines of data. The data consists of user id's and menus that correspond to the user id. There are 131 user id's in total. I would like to be able to return all the menus for one of the user id's. If we need to start with one tab and work from there, that's fine.
I am preparing an "automated" order form. I have a list of products (ten) in a pull down list, a list of options (3) in a pull down list and a list of the pricing.
So, If PRODUCT_A with OPTION_A, then PRICE = $X. If PRODUCT_A with OPTION_B, then PRICE = $Y. If PRODUCT_B with OPTION_C, then PRICE = $Z.
etc.
I want the user to select the product, then the option, and have the correct price "pre-fill" the cell.
So basically I am looking to build a formula that would take this information and return a text value.
if it could work anything like this sumproduct formula to bring back text that would be awesome: =SUMPRODUCT(--(A1:A10="7654321"),--(B1:B10="ABCDE"),--(C1:C10="3"),D1:D10)
But instead of a formula that returns a sum of values, the return is a single value. The three criteria will always be unique. There will never be a case where there is a duplicate of all three.
I am trying to lookup two distinct values in two columns (turquoise and green) in 'Cust data' tab and correlate them to the same values in two columns on 'Driver activity' tab, then return a result from column in yellow on 'Driver Activity' tab to populate the driver name in yellow column on 'Cust data' tab.
I'm looking for a function (or combination of functions) that will essentially search for a row that contains two specific values (in two different cells), then grabs a value from another cell in the same row to use in a calculation.
I don't know... that probably doesn't make any sense, and maybe there's no way to get it done. If so, it would save me hours. Couldn't see a way to attch an example file to my post, otherwise I could probably describe it a bit clearer.
I have a table of data (say Column1 to Column 5) with multiple rows.
Column 1 to 4 will have the lookup values in multiple rows and Column 5 data should be picked up using vlookup or other lookup function.
I managed to somehow bring all these lookup values in (Column 1 to 4) in a single column in another sheet. I am now trying to use some lookup or other functions to match this single column and pick column 5 data in original sheet. Result i am expecting is lookup value in first column and next to it column 5 value.
It is basically a lookup wherein lookup value is spread over multiple rows and columns and result column is fixed. I tried using vlookup, but lookup value column and column number had to change every time when i moved from column1 to 4.
In sheet1, I have the borrowers and outstanding per employee. In the Area Avg sheet, I have the average borrowers and outstanding in each area as this is the standard for comparison (I got this through the subtotal function).
Now what I have to do is in sheet1, format(change the color) each cell under borrowers which is greater than the average of the relevant area. Since, (in my actual data) the name of the area may be duplicate in different regions, the reference value (average borrowers of the area) from "Area Avg" sheet has to be traced through multiple criteria which are: Division, Region and Area. The same also has to be done for outstanding but the solution can be provided for borrowers only.
I need to populate the Rep Names looking up 3 Criteria (Client Id,Curr Cov Id,Dom Buy Grp Id) from the Table 1, either one matches the Rep Names has to populate.
The data has to be pasted on WIP_Sheet in different columns.
Spreadsheet 'Raw Table' has many, many rows, and a dozen columns of raw input data. Each row has date, number, and text fields.
Spreadsheet 'Dashboard' is a somewhat simple one page summary of one day's worth of data entry from Raw Table. Dashboard isn't a simple table, but more form-like in appearance (not sure if that matters). Essentially, the values from Raw Table are spread out in different locations in Dashboard, and not just in a row.
The Dashboard fields gets their values from Raw Table based multiple criteria, the most important being a manually inputted date entry at the top of the Dashboard. The other criteria are simple numbers (ie, 1, 2, 3, 4....) built into the formula. So a set of criteria for one particular cell in the dashboard could be: 4/6/2014, 1, 3. Those 3 criteria are unique identifiers: there is only one match, ever. If those criteria are met, then a value from a specific spot in that row from Raw Data is placed in the dashboard field.
Here is one formula example for one such field in Dashboard:
The first sumproduct criteria is a match for the date in Raw Data's column A with the manually inputted date in Dashboard located at D1.
The second criteria is match for the value in column B with a value of 1. The third criteria is match for the value in column C with a value of 3. (Again, this is an example. The 1,3 set can be any specific combo from 1,1 to 8,8. Thus, a day's data can have no more than 64 records of a dozen date, number and text fields.)
The Index function is obviously array,row,column. So this example index function results in the contents of column D in the row that the sumproduct function generates.
This dashboard spreadsheet works perfectly everywhere except four fields (out of 100+ instances of the same formula). In the faulty spots, the value that the index function is returning in Dashboard is basically the contents of column D in Raw Table in the row that corresponds to the place the formula is located in Dashboard. It's almost like there's an error in the formula result, and the index is defaulting to the row number in Dashboard. But I've tested this 8 ways til Sunday. I can even straight-up copy these four faulty fields to another part of the dashboard, and the results are magically correct. And I've checked to see that the actual sumproduct function result is returning the correct row for these fields. I don't have an answer as to why it's defaulting to the formula row number in just these four locations, and not the row value that the sumproduct function is correctly producing.
I've thought maybe it was a data type problem in Raw Data, but that route produced a dead end. It has to be something with the Dashboard. I'm going to start over with a new Dashboard spreadsheet, and see what happens. One thing I did was, early in development of the dashboard, use ctrl-shift-enter in the first faulty field, then went back and changed the formula wholesale to something different, and copied that cell to (at least I think) the three other faulty spots. But if I went back and completely changed the formulas and did away with the brackets, the cells should be fresh, no?
I have been trying to find a formula for this but I have yet to find one that works for me.
Data;
English - United Kingdom, Czech, Spanish UK - United Kingdom Swedish English - US French US France German Portuguese +8000 more various values
I am looking for a formula that can search for multiple values e.g. english, us, uk and united and then return the value "Yes".
I was looking for something that includes wildcard searches or contains so that it is not affected by upper or lower case but combining this with multiple searches was proving difficult.
I have a workbook that's setup like a form, with 30+ worksheets in it (lets say this file is called "source.xlsx"). I have information in specific cells I want pulled out in each worksheet and brought in to a new workbook called "Destination.xlsx" and listed in a row.
I have attached an example to better explain. I have 2 sheets that I need to compare. The main comparison is the Account #. So You take the account number on the inputted info sheet and look for it on the invoice sheet. This is what it needs to do:
If account is on user inputted but not invoice the information gets put on the results sheet. If the account is in both compare the code values columns F:Q. The main issue I'm having here is that the value aren't always in the same spot. for example you could have "5C" for code 2 and "5J" for code 3 on the user inputted sheet but on the invoice sheet "5J" could be code 2 and "5C" could be code 3, with the quantities in their respective places. When placing information on the results sheet the job info should come off the user inputted sheet.
I am using the below array formula in G2 (that I then drag across) to show the score for all the times "mike" appears. I would like to match all the times "mike" OR "red" appears, so that the value in K2 is "99".
I am trying to solve a problem. I am currently using this formula = SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)
This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.
So the info looks like this in excel MARKETING 200612 -10 MARKETING 200701 -25 MARKETING 200708 -50 ECONOMICS 200709 -30
The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.
I am working with a nonprofit to set up their financial ledgers. There is one workbook with 12 sheets, one for each month. The goal is to be able to set up a formula that searches through all 12 sheets for every donation that a specific individual has made. For instance, let's say that John Smith gave x amount of money on 1/1/2000, y amount of money on 1/10/2000, and z amount of money on 2/2/2000. This data will appear on 2 different worksheets. I have the following formula, which allows me to look through one sheet at a time:
Where Column A in each sheet is individual name, and column B is amount donated. Sheet "Jan" is the data for the month of January, and sheet "Smith" is the culmination of John Smith's donations for the full year. Using this array function, I am able to retrieve all data for John Smith in the month of January, but I can't find a way to make one function that searches for all of John Smith's donations in each month. Is there a way to build an array function in VBA that would accomplish this?
I have a table where the rows are conditions and the columns are experiment numbers, as an example below:
Experiment 1 Experiment 2 Experiment 3
Hardness X
X
Solubility
X X
Density X X
The table is fairly large. What I would like to be able to do is use a lookup/formula that will return all the experiment numbers a given condition is tested in. In other words, for a given condition (i.e., Hardness), which columns have an "X". Not sure if that can be done with a lookup or not or if there is another function necessary. I would like to be able to do it without macros though and also have it automatically update if I move the "X" around to different experiments.
I have a huge document that looks like this. This is only one part of roughly 2500 lines blank Original Budget Previous Estimate Estimate Actual Actual Costs
[Code].....
My problem is that I need to extract Soft committ and actual cost for each element (this case its TPS658). What really makes the problem for me is that I only want cost for cost place 230, 250, 300, 350 (only 350 shown here). Not the total that is shown in the row for element name.
Is there a way to use a lookup formula to return all values of a given text, not just the value of the first listing of the text. In an attempt to clarify my already confusing request, if A5 on "worksheet1" is "Land" I want E5 on "worksheet1" to return the summation of values assigned to "Land" "worksheet2" "column B" any time "Land" appears on "Worksheet2" "Column A".
I'm trying to return the next unique item in the list of partnumbers. The count column indicates that there are that many instances of that part number. I then populate down than many to VLOOKUP the value "count" number of times. The formula I am using to get the MFR code compares the pn to the one above it. If it matches, I want it to return the MFR offset by the one above it for that part number.
Source data: (will alwyas be sorted by part number, then by MFR) Part NumberStock num NAME MFR BDEGHS55555544333RIVET,BLIND53551 BDEGHS55555544333RIVET,BLIND92215 BDEGHS55555544333RIVET,BLIND98996 BDEGHS55555544333RIVET,BLINDC4293
I am trying to use a lookup to find the quantity of a certain fabric. However, more than one style uses the same type of fabric. Is there a way to do a lookup that retrieves multiple values?
I'm trying to do the next level of a v-lookup. I have a group of data with a text "flag" on certain rows. On my summary worksheet, I'm trying to do a lookup or a nested index function retrun all of the values with the text flag next to it.
I've been playing around with nested formulas and this is where I'm stuck. Here's what I came up with:
I have a giant lookup table with five columns. I have three variables, and I need to find the row in the lookup table where the variables match the first three columns of the lookup table. ie. Find the row where variable 1 matches the value in column 1, variable 2 matches the value in column 2 and variable 3 matches the value in column 3. If this row exists then return the value in columns 4 and 5 of that row. Otherwise, return a zero.
