Combining ISNA(match) With Lookup Array

Feb 15, 2010

Am trying to figure out the best way to combine into 1 cell an ISNA(Match... and a Lookup array that will run if the ISNA(match ... returns a false value.

Right now it's running in 2 separate cells ISNA(Match ... and then an if statement that if the ISNA(Match returns false, that the look-up runs, if it doesn't return false, then the value is 0)

View 9 Replies


ADVERTISEMENT

Using The =ISNA(MATCH Formula

Jan 26, 2009

I have 2 spreadsheets. Both have a list of part numbers on. Beside each part number i want a formula that tells me if the part number is present in both spreadsheets so its says TRUE. If its not present then FALSE. I've tried using this command but it doesn't seem to work properly =ISNA(MATCH(B2,A:A,TRUE))

I've attached the 2 spreadsheets. Spreadsheet1 is where i need the forumula placed beside the part numbers so if its present in Spreadsheet2 as well it displays TRUE beside the part number in Spreadsheet1.

View 4 Replies View Related

Conditions LOOKUP Two Files (ISNA)

Dec 21, 2006

Let me first explain what I tried to do, before getting to the mess I created. Maybe I should use another formula?

I wanted to compare the amounts in two files on the basis of the same product number. Thus search for a sheet and a column in another file for the same value of A6 (current file) and show the value of the same row in another column (of the other file). However, if there is no value I wanted it to display zero (0) or a text such as "False".

First I did a basic LOOKUP which should work?. However it still showed #N/A for cells without a reference value (A6 is THA) or target cells without a target value (€100.00). I tried to avoid this by combining the ISNA function. However, although the last value shown is correct, the ones before change and seem to add up, or refer to another cell?

Another issue I did not come to yet is the fact that I would like it to search for the correct sheet based on the first three letters of the reference (A6), preferably not case sensitive. A6 is Tha13, first three letters indicate sheet name Tha. Any suggestions on this? ...

View 9 Replies View Related

Macro For Conditional Formatting Using Isna, Match And Indirect In The Formula

Apr 2, 2009

I have configured conditional formatting to check valid entries in a dependant list. I used the solution provided by SHG at:

http://www.excelforum.com/excel-prog...ant-lists.html

Now I need to use a macro to activate and deactivate the conditional formatting due to performance issues.

When the formula for data validation includes the indirect funtion I got a compile error and the macro won't run.

View 3 Replies View Related

Combining If And Lookup

Jan 31, 2009

I need to find a formula to show the time allowed for each person, now they recomend combining 'if' with 'lookup'. now I may be having a blonde moment but I have tried to figure it out for a while now and i am stuck.

View 14 Replies View Related

Combining Match And SUMIF

Feb 19, 2014

I have three columns (Location, Task, Time) that I want to gather information from and display on a separate page.

I've used SUMif Function to group task and time together. I want to separate this information between different Job Locations. I believe INDEX and MATCH functions need to be used??

For example: job1 will only display relative hours for that location, While Job2 location will display relative hours on a separate summary page.

View 5 Replies View Related

Combining IF And Lookup Formulas Returning Zero Value

Jan 12, 2009

Here's my formula that gives me an answer of zero.
=IF(IF(L14="L",(LOOKUP(B14,data!Y1:Y14831,data!AO1:AO14831)),0),IF(L14="L+R",(LOOKUP(B14,data!Y1:Y14 831,data!AQ1:AQ14831)),0),0)

L14 is a dropdown box, selection is L or L+R
The L true result is 30 and L+R result is 60
It should be possible to combine these should it not?
I would do a screen shot but it's quite huge.

View 7 Replies View Related

Converting 3x10 Array To A 1X30 Array To Run A Match Formula

Apr 7, 2009

Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.

Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?

Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.

And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.

I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.

View 6 Replies View Related

Index Match Using Cell Combining

Jul 13, 2014

I am trying to use following string to find result into column F and unable to find reason for Error.

=INDEX($C$2:$C$5,MATCH(D2&E2,$A$2:$A$5&$B$2:$B$5,0))

A
B
C
D
E
F

1
part
code
price
find part
find code
Result

2
x
11
5
y
12
#VALUE!

[Code] ........

View 1 Replies View Related

Fastest Lookup Method: Use A Key To Lookup A Value (VLookup, Index/Match, DGet, And The Rest)

Mar 26, 2008

Excel offers many ways to use a key to lookup a value (VLookup, Index/Match, DGet, and the rest). What's the fastest way to perform a lookup of a small table of, say, 30 rows of key-value pairs? Theoretically, it would be most efficient to use a branch table (also known as a jump table). See the wikipedia article for branch tables: http://en.wikipedia.org/wiki/Branch_table. Does Excel/VBA have a way to create a branch table for such lookups?

View 9 Replies View Related

Array Match Formula Fails But Simple Match Works?

Feb 5, 2014

In sheet 1, I have

Col A Col B
John Sedgwy - R

In sheet 2, I have the following names

Col A Col B
Peter Walker
John Sedgwicky

When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}

gave me an error but when I did an individual match to both John and Sedgw, it works.

View 4 Replies View Related

LOOKUP / MATCH Function To Lookup The Owner Name Typed In Cell

Jan 2, 2009

I have a workbook with 2 different types of sheet - 1 containing source data and the others 'collecting' data from the source sheet, depending on what the sheet is for.

For example, the data source contains different pets, their names, ages and their owners.

The other sheets are on a one-per-owner basis.

What I would like to do is use a LOOKUP / MATCH function to lookup the owner name typed in cell A1 of the output sheet and match it with the corresponding owner name(s) on the source sheet. I would then like it to return with each pet and append the results on the sheet accordingly - like below:

John Smith (in cell A1)

Pet - Name - Age
-------------------
Dog - Rover - 3
Goldfish - Tom - 1
Gerbil - Chewit - 4

View 7 Replies View Related

Index Match Array New Formula Not Array?

Nov 6, 2013

Is there anyway to recreate this formula w/o it being an array ?

{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}

View 5 Replies View Related

Lookup/Index-Match-Match Using Segments

Jun 10, 2009

Is it possible to return a value or a sum of values using segmented lookup criteria. The Sample 1 spreadsheet (attached) explains it better.

View 10 Replies View Related

Lookup On Part Of Lookup Array

Feb 21, 2009

Assuming 1st row is a header row

Sheet1, Column A

1230000_XL07 - WB OPS
1230001_XL08 - WB OPS
1230002_XL09 - WB OPS

Sheet 2, Column A

1230000

How do I lookup 1230000 and return 1230000_XL -07 WB OPS in B2

View 2 Replies View Related

Add ISNA To This Formula

Oct 28, 2008

=IF(ISBLANK(VLOOKUP(1,'D-Sort-R'!A96:$N$450,4,0)),"",VLOOKUP(1,'D-Sort-R'!A96:$N$450,4,0))

I've almost got what I need for a mind bending series of sorts that go from worksheet to worksheet. I need to add ISNA along with the ISBLANK above.

View 9 Replies View Related

Isna (vlookup)

Jul 17, 2009

I use the following formula. It works except it returns "0" if the field is blank. What alternate formula can I use that will return blank instead of zero if the field is blank?

=IF(B3="","",IF(ISNA(VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)),IF(ISNA(VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),"",VLOOKUP(VALUE(B3),Customers!$A$2:$L$1502,5,FALSE)),VLOOKUP(B3,Customers!$A$2:$L$1502,5,FALSE)))

View 9 Replies View Related

ISNA Does Not Recognize #N/A

May 10, 2006

I realize there are a number of threads on this topic, and I've read through them but have been unable to apply those answers to this problem. I've attached a sample of the worksheet in question. The worksheet is supposed to tell me if messages are supported via a certain Network (BFX).

Column A is the result of a VLOOKUP function, which returns Yes or No if the entry is found, or #N/A if the entry is not found. Column B is my attempt to translate column A into strictly "Yes" and "No", converting an #N/A into a "No". For some reason, the ISNA( function I'm using doesn't seem to work, as highlighted in row 18.

View 2 Replies View Related

Using The Function ISNA In A Macro

Nov 4, 2008

It then places all the data on a new sheet. My problem is that some of the formula that the macro places on the new sheet come back with the result #N/A - which is fine, as they are the result of a lookup.

What I want to try and do, is at the end of the macro, get it to delete the row if the activecell is showing as #N/A

I've tried to write a small bit of code for it...

View 10 Replies View Related

ISNA And Vlookup (get Data From Another Tab)

Oct 20, 2008

I'm trying to get data from another tab, but only if it is greater than or less than a certain number. Here's what I'm using but doesn't seem to work.

=IF(ISNA(VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE)),">=22.00%",VLOOKUP(A13, 'Aim MTD'!A2:T63, 5, FALSE))

A13 is targeting the name of the person
Aim MTD is the sheet tab the info is in

And I want to select the information only if the cell value is 22% or greater. If the cell value is less than 22%, I don't want it to read or to read zero. I'm not an excel expert (yet), but hope to be one day!

View 5 Replies View Related

Lookup Last Value In Array Instead Of First Value?

May 16, 2014

untitled 1.JPG

i want result "z" in b1 in all three condition of attachment

View 3 Replies View Related

Combine ISNA And ISBLANK In Same Formula

Mar 5, 2014

How to combine ISNA and ISBLANK in the below formula such that it returns empty cell if vlookup cell is blank.

HTML Code:
=IF(ISBLANK(VLOOKUP(B4,'C:UsersArulDesktop[Common Spares 1.xlsx]Sheet1'!$B$1:$L$77,2,0)),"",VLOOKUP(B4,'C:UsersArulDesktop[Common Spares 1.xlsx]Sheet1'!$B$1:$L$77,2,0))

View 5 Replies View Related

Lookup Last Value In A Table Array Instead Of First Value

May 15, 2014

A b c d

100 100 x

100 y

100 z

I want to lookup 100 in colum b with a result of z instead of x in criteria c:d

View 2 Replies View Related

Multiple Value Array Lookup?

Jul 14, 2014

I am trying to write a function that will look up values in an array, and then return a value from a separate array. where:

Column A has a name and dates:..Column B has a number associated with the date (0 or 1)

"John" ..............................................0
6/1 ..............................................0
6/2 ..............................................1
6/3... ..............................................0
6/30 ..............................................1

I am trying to make a summary table that shows the dates associated with each time "1" occurs

So it will look like:

column C: ...... Column D: ...... Column E:......Column F:
John.................6/2...............6/30............... N/A
Bill ............... 6/1...............6/2............... 6/30
Fred ...............N/A ...............N/A...............N/A

and so on:

I've tried excel formulas, but can't get the right date returned.

View 2 Replies View Related

Lookup And Return Array

Mar 8, 2007

I have two columns of data, one containing Groups, another containing Items. Like this:

Group | Item
A | Apple
A | Orange
B | Pear
B | Banana
C | Tire
D | Coffee

etc.

On another sheet, I have each of the groups listed as column headings. I want to resort the data and display it in columns instead of in a single list.

I can write a VLOOKUP to search for "B" for example, and return "Pear", but I want to return all matches for "B" not just the first one.

View 2 Replies View Related

Lookup Closest Value Non-array

Feb 12, 2008

The formula you see below works great. It will lookup to the closest value that matches the criteria.

=LOOKUP(2*F2-0.000000000001,C1:C4+C2:C5,D2:D5)

Here is the problem when I try to expand the range I get a zero.

=LOOKUP(2*F2-0.000000000001,C1:C19+C2:C20,D2:D20)

Is there anyway we could overcome this?

I know I could use a formula array for this, but I would like to know if this could be done in a non-array formula ....

View 9 Replies View Related

Sum A Range From Array Lookup

Jun 6, 2007

I'm using an Array formula to lookup a particular value then return a related column value.

What I would like to do is Sum a related range of cells.

The formula I have used to look up the single cell is

{=INDEX('[PL.xls]Parts List'!A4:S205,MATCH(A63,'[PL.xls]Parts List'!A4:A205,0),7)}

So in this case the related value in column 7 is returned.

I would like to sum the related values in say columns 5 to 11

View 4 Replies View Related

Trying To Do VLOOKUP ISNA Formula - Error TOO MANY ARGUMENTS

Nov 6, 2012

I'm trying to use this formula but I get the error "too many arguments". How can I do the same as the formula without an error:

=IF(ISNA(VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE)),VLOOKUP(B12,GYROLOKBR!A12:E2000,3,FALSE), VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE),VLOOKUP(B12,GYROLOK316ANDM!A12:E2000,3,FALSE))

I added in the VLOOKUP(B12,VALVESFILTERS!A12:E2000,3,FALSE) - when I used it without that it worked. But I have 3 sheets I need the the VLOOKUP to look over and this formula that I copied off another thread only had 2 tabs.

View 2 Replies View Related

Combine Vlookup, Isblank, Isna In One Formula

Sep 27, 2009

What i want to do is to look up of the value of home and away games seperatly. if there is no match for the lookup i get the "N/A" and if there is no value i get "0". If i get 0 the formula will calculate as a lost game.

View 10 Replies View Related

Lookup Match

Jan 8, 2008

I have a two sets of data, both which I have calculated variances plan Vs Actual, I would like to compare the previous months variances of different sheets. I have put a sort on the variances in descending order.

I want to match two fields E.g. B1 & D1 in sheet1 AND if they match then bring back L1 data in sheet2? The both sheets have same column names and in same order.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved