I have a have a userform that uses a macro to save data to a worksheet and i want to display the row number using a loop ie if column B3 is not empty/contains a values add a number 1 in column A3 and so on everytime a record is added.
View 14 RepliesI have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NOÂ 33/5/2012NOÂ NOÂ 43/4/2012NOÂ NOÂ 53/3/2012 YES2NOÂ 63/2/2012NOÂ NOÂ 7 3/1/2012 YES1YES682/29/2012 YES0NOÂ 92/28/2012NOÂ NOÂ 102/27/2012 YES1NOÂ 112/26/2012 YES0NOÂ 122/25/2012NOÂ YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies View RelatedWhat I am trying to do is to loop through ALL 6 number combinations and count how many Odd & Even numbers there are in each of the 6 positions. For example, for number TEN I would like the total combinations where number TEN is Odd in position ONE, then number TEN is Even in position ONE, then number TEN is Odd in position TWO, then number TEN is Even in position TWO etc upto and including where number TEN is Odd in position SIX, then number TEN is Even in position SIX. Obviously number TEN is Even, but out of the TWELVE columns of data for each of the numbers there will be SIX with a figure in it and SIX showing ZERO. Here is the code I have so far but can't quite get it to work.
Code:
Option Explicit
Option Base 1
Sub Odds_and_Evens_by_Position()
[Code]....
in writing a formula that will count the number of times
the store is listed (Column B) when it matches with closed (Column C).
On the table listed below I will return the data using a match.
From this table
A B C
1/8/2006 9:45Store 1Closed
1/8/2006 9:57Store 2Closed
1/8/2006 10:05Store 3Closed
1/8/2006 10:09Store 4Closed
1/8/2006 10:15Store 5Closed
1/8/2006 10:24Store 1Closed
1/8/2006 10:36Store 2In Progress
1/8/2006 10:41Store 3In Progress
1/8/2006 10:50Store 4Closed
1/8/2006 10:58Store 5Closed
1/8/2006 10:59Store 1Closed
1/8/2006 11:15Store 2Closed
1/8/2006 11:22Store 3In Progress
1/8/2006 11:24Store 4In Progress
1/8/2006 11:33Store 5Closed
1/8/2006 11:51Store 1Closed
1/8/2006 11:56Store 2Closed
1/8/2006 11:57Store 3Closed
1/8/2006 12:03Store 4Closed
1/8/2006 12:16Store 5Not Started
1/8/2006 12:23Store 1Closed
1/8/2006 12:28Store 2Closed
1/8/2006 12:57Store 3Closed
To this table
A B C
1/8/2006 9:45Store 15
1/8/2006 9:57Store 24
1/8/2006 10:05Store 33
1/8/2006 10:09Store 43
I'm trying to write a VBA procedure that will loop through all the worksheets within my Excel workbook one by one (the number of worksheets in the workbook may vary from month to month) and count all the non-blank cells in Row 12.
If the number of non-blank cells is anything other than 24, I want the procedure to display an error message. (Each individual sheet in the workbook is supposed to contain 24 column headings, and all the column headings are in Row 12).
I have data in range A2:E5000. Column D contains cost centers entered by users.
I also have a list of valid cost centers in range K1:K10.
What would be the vba code to check and return the count of the items entered in column D which are not valid, based on the list in range K1:K10?
I have data in a column (G) consisting of zero and ones. I would like to count the number of clusters of the number 1 in the data. For example in the data below there are 8 ones. But instead, I need to calculate how many groups of 1s occur. So in the case below the group of 1s = 3.
In terms of what defines a group. Whenever there is a zero either before or after the occurance of a 1 constitues a group, i.e the groups are broken out by zeros.
0
0
0
0
1
1
1
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
1
1
0
0
0
0
0
0
1
0
0
I want to count the number of times any given number appears either as a consecutive group or singularly.
To give you a context I monitor windturbines and for any given fault code I wish to count the number of events it occurs in a month. Now it could be for 1 hour then clear the next then back for 17 then claer again. That would be 2 events!
NB the data is in seperate coulumns per turbine.
Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!
View 6 Replies View RelatedIs there any method to speed up a for each loop to count text in a cell with multiple criterias in a single column. This is on example:
Code:
For each rr in r
If rr = "a" And rr.Font.Strikethrough = False Or rr = "B" _
And rr.Font.Strikethrough = False Then
a = a + 1
end if
next
What I want is a button that will add 1 to a number everytime it is pressed.
View 9 Replies View RelatedI would like to count the number of occurence of a user given number in a range through VBA code. Have attached a sample with this.
View 2 Replies View RelatedHow can I use an if loop to return the first number of a date.
For example, if cell A1 has the date: 7/06/2006, I want to say:
If (ActiveCell.Characters(Start:=1, Length:=1).Text = "7") Then
TodayInt = 7
End If
But this is trying to look for a string and its finding a date, so I
get an error...
I have a table of data (lets say A2:H30) i want to populate so i want the macro to loop based on how many columns i have? I am using this to post the data based on # of rows..
Sheets("Main Cal").Select Dim bottomA As Integer
bottomA = Range("D" & Rows.Count).End(xlUp).Row
Dim c As Range
Dim ws As Worksheet
For Each c In Range("D3:D" & bottomA)
Set ws = Nothing
On Error Resume Next
Set ws = Worksheets(c.Value)
On Error GoTo 0
If ws Is Nothing Then
First: I am using following loop code to repeat until the last row with data in column B has been reached. I keep getting a compile error and can't figure out to to fix it. The compile error occurs on the ".cell" and ".range" portion of the code and has indicated an invalid or unqualified reference.
Second: Once I have the loop working, I need to reference different cells each time through the loop. The first time through the loop I need to reference cells B2 and C2....the second time cells B3 and C3.....and then B4 and C4....and so on. I am increasing the value of i each time but when I ran the code, I was not getting any results.
I am trying to create a number counter which runs up to a value which is determined by a COUNTIF Statement in the spreadsheet. I can get the number counter to run to the given value. However, due do formatting reasons I do not want the counter to start in cell A1 but A3 instead.
Essentially my code looks like this:
...
ActiveSheet.Cells(3, 1).Select
Dim i As Integer
For i = 1 To Range("A1")
Cells(i, 1) = i
Next i
...
I have a sheet with data in rows across several columns.
I want to copy the data from each row into a new sheet and save it with another name (which I already have ascript for), but as I have 10 rows , basically all I've done is copy the script 10 times and chaged the row numbers and nae to save as.
What I want is one script that does all I have now, but then loops back to do the next row down and changes the name to save it as as well (which is the person's name listed in the row)
Make a loop where I can increment the row number and execute the command where I set the formula?
View 1 Replies View RelatedI have a database of over 200,000 parts
In this database i have cost and sale price. 20,000 parts have the numbers backwards.
if you loop the rows you can subtract =SUM(AE2-Y2) if that number is a negative number I would need the value of AE copied to Y2 and the value of Y2 copied to AE2. the 2 being the row number which would always change with the loop.
I'm creating a user form that will have 10 checkboxes on it. Depending upon certain conditions being met elsewhere in the workbook, I would like to populate the checkboxes' captions with data from the workbook.
My question is, can I loop the procedure with the variable number included in the checkbox name (well, more to the point, HOW can I loop the procedure...)?
I would like to do something like this:
Dim a As Integer
For a = 1 To 10
With Worksheets("Hi-Tech")
If .Cells(a + 1, 2).Value "" Then
chkHiTech & a.Enabled = True
chkHiTech & a.Caption = .Cells(a+1, 2).Value
lblHiTech & a.Enabled = True
lblHiTech & a.Caption = .Cells(a+1, 2).Value
etc.
I am looking to create a number of series on a chart (xyscattersmooth) from a datatable. Below is my data Table....
View 9 Replies View RelatedI’m getting data from query. My data has fields: Item No, Customer ID & Sales rep.
I need to find out for each Item number which customer put order and who was the sales rep. (Excel 2002). see file attached.
I have some form used for "deret fauli test" it's like have 42 row cell and 37 column cell. What I need is count how much row between number 1to2, 2to3, 3to4, ... 19to20.
Here some example:
__|A|B |C |D
1_| 1| | 3 |
2_| | 2| |
3_| | | |
.
.
.
42| | | |4
each column have 42 row.
That mean from number 1 to number 2 have 42 + 2 = 44 row (this value put in A 45)
number 2 to number 3 have 40(because 2 row have add to number 1) + 1 = 41 row (this value put in A 46)
number 3 to number 4 have 41 + 42 = 83 row. (and this one put in A 47)
Anyother way to find how much row each number?
When you click on an entire column and drag your mouse to the right/left, you get a little box that tells you the number of columns highlighted, actual the same with rows. This little box has stopped coming up on my Managers laptop. I have looked in the View tab and the options area but nothing jumped out at me as the fix...
View 3 Replies View Related-Sheet1 has a list of numbers in column A.
-Sheet2 has a list of numbers with some numbers appear more than one in column B.
-I need to write a macro that start with the first number in sheet1 and go to sheet2 and count how many time that number appear. If the number of count more than 1 then highlight it in sheet 1, or copy it into a new sheet.
-Go back to sheet1 and start with the next number in the column until finish.
I have a row (say d3:i3) that has numbers in it. j3 has the sum of all the numbers in that row. I would like k3 to count the number of 0's in that row.
View 2 Replies View RelatedIs there a way to add a colum but only count the item once if it appears more then once.
I want to add a colum with inputs of MHC07, MHC06, MHC35 and so on. These numbers will appers several times in the colum but I only want it counted once.