Count Number Of Equal Cells With A Prefix In Col D And Insert Count In Col A?
Aug 7, 2013
I need to count the number of equal cells in col D beginning at the top of the column. The counted cells must begin with a text prefix of "Category:" without the quotes.
Some but not all of the cells in col D begin with a prefix of "Category:" without the quotes, followed by a word or words following the word "Category:" See examples below. All of the terms prefixed with "Category:" in col D are in alphabetical order. I need to count the number of identical cells in col D with the "Category:" prefix.
Examples of the contents of cells in col D with the "Category:" prefix are as follows:
Category: Adversity
Category: Answers
Category: Assurance
Category: Blessings
Category: Build
Category: Change
Category: Children
Category: Choices
Cells above and below cells with a prefix of "Category:" in col D are not adjacent.Cells above and below cells with a prefix of "Category:" in col D are separated by 3 to an undermined number of rows.
I need to count the number of equal cells in col D and insert the count in col A at the last equal term. For example, col A above would have 93, 1, 1, 5, 10, 8, 3, and 12 inserted into col A.
View 9 Replies
ADVERTISEMENT
Dec 27, 2013
I'm looking at test results and would like to know how many times in a row correct answers were given before getting one incorrect. The way I have this currently set up, is if a student has the answer correct it returns a "TRUE" value, and a "FALSE" value for an incorrect answer. A typical test may have 50 questions, so I would have either "TRUE" or "FALSE" values in rows A1 through A50.
So I've been trying to figure out a formula that counts the number of times "TRUE" rows repeat 'consecutively' in a given column, in this scenario column A. The formula would need to check the current row and if "TRUE" check the row immediately after, if that row is also "TRUE" then check the row immediately after that, until it runs into a "FALSE" string, then display that total count of consecutive "TRUES" in another cell. I understand there may be duplicate results but I'm only really interested in the longest value, so duplicates can be ignored.
If it makes the formula easier, each possible result can be assigned to it's own cell. Let's assume the test has 50 questions. So if a student got all 50 questions correct the result count would be 50 in cell B50, or if they got 25 correct before the first incorrect answer, cell B25 would say 25, etc. I'm guessing I could then easily query this column for the largest value to come up with what I need at a glance.
View 5 Replies
View Related
Oct 23, 2012
I have a spreadsheet with two colums with dates. The names of the ranges are 'DataContractualStartDate' and 'DataContractualEndDate'.
How do I manage to count the no. of records with equal dates at the same row?
I have used the following but this gives me zero, while in the example below the result should be 3.
=COUNTIFS(DataContractualStartDate,DataContractualEndDate)
The table looks as follows:
dContractualStartDate
dContractualEndDate
01-05-2012
01-05-2012
[Code] ....
View 6 Replies
View Related
Feb 11, 2014
Original
01012014 DAVE JOHN
02012014 MAT
03012014 CHRIS MIKE PHIL
What I want
01012014 DAVE
01012014 JOHN
02012014 MAT
03012014 CHRIS
03012014 MIKE
03012014 PHIL
View 4 Replies
View Related
Aug 21, 2006
going down are stores a, b, c, d.... what i'm filing in across is the square feet of each store and what quartr or year each store came into place. so there will either be a 0 or a number Now, I want to be able to count the number of nhew stores each quarter. how do i create a formula that just recognizes it the first time there is a number and not a zero... because i will put the square feet in subsequent quarters after it opens so i can see yearly how many square feet the store had. then also, how can create a button on the page that will say quarterly numbers and a button that is annual. so that i can hide the quarterly columns and just see an annual spreadsheet... and for the quarterly button so i can hide the annuals and just see the quarters....
View 6 Replies
View Related
Jan 16, 2006
in writing a formula that will count the number of times
the store is listed (Column B) when it matches with closed (Column C).
On the table listed below I will return the data using a match.
From this table
A B C
1/8/2006 9:45Store 1Closed
1/8/2006 9:57Store 2Closed
1/8/2006 10:05Store 3Closed
1/8/2006 10:09Store 4Closed
1/8/2006 10:15Store 5Closed
1/8/2006 10:24Store 1Closed
1/8/2006 10:36Store 2In Progress
1/8/2006 10:41Store 3In Progress
1/8/2006 10:50Store 4Closed
1/8/2006 10:58Store 5Closed
1/8/2006 10:59Store 1Closed
1/8/2006 11:15Store 2Closed
1/8/2006 11:22Store 3In Progress
1/8/2006 11:24Store 4In Progress
1/8/2006 11:33Store 5Closed
1/8/2006 11:51Store 1Closed
1/8/2006 11:56Store 2Closed
1/8/2006 11:57Store 3Closed
1/8/2006 12:03Store 4Closed
1/8/2006 12:16Store 5Not Started
1/8/2006 12:23Store 1Closed
1/8/2006 12:28Store 2Closed
1/8/2006 12:57Store 3Closed
To this table
A B C
1/8/2006 9:45Store 15
1/8/2006 9:57Store 24
1/8/2006 10:05Store 33
1/8/2006 10:09Store 43
View 11 Replies
View Related
Jan 19, 2008
Create some sort of formula combination or macro that will: Recognise a cell with a value of 1, 2 or 3 in. If 3 is in the cell, the cell to its left will be counted and added to a total. If the cell that has 3 in changes the value is removed from the total. Ive tried lots of methods but i cant figure this one out!
View 6 Replies
View Related
Apr 2, 2007
i need a formula to count the number of cells in a column that HAVE a specific value (for example 1123). I tried the COUNT and COUNTIF function but it counts all the cell that CONTAIN the number 1123, i just need the cells that are EQUAL to 1123.
View 14 Replies
View Related
Mar 14, 2009
I need to count the number of cells that has a certain criteria. Let’s say how many A or B’s etc.….. has values? It should not count the blank cells.
------ ------
LettersValue(s)
A 12
B 1
B 2
C 3
C 4
A 23
A
A 1
B 4
C
D 1
A 45
A 3
View 2 Replies
View Related
Apr 15, 2014
Column A has current building, column b has future building. Would like to count the number of changes without adding a separate column with an if statement.
View 3 Replies
View Related
Feb 5, 2010
I want to count cells in column AA that are graeter than 160, and in column N = "RM" and in column A = "CBP". Can't seem to get this right.
View 4 Replies
View Related
Mar 7, 2012
ABCDE1DATEEMP1Days Between SalesEMP2Days Between Sales
23/6/2012 YES0NOÂ 33/5/2012NOÂ NOÂ 43/4/2012NOÂ NOÂ 53/3/2012 YES2NOÂ 63/2/2012NOÂ NOÂ 7 3/1/2012 YES1YES682/29/2012 YES0NOÂ 92/28/2012NOÂ NOÂ 102/27/2012 YES1NOÂ 112/26/2012 YES0NOÂ 122/25/2012NOÂ YES4
I believe I need a loop code to do what I need, because none of the functions I've tried have worked. I want to start at B2 and go down the column until I come to a YES. When I find a YES, I want to know the number of NOs that preceded it. Then I want to go from that YES(#1) to the next YES(#2) and count the number of NOs between YES(#1) and YES(#2) and so forth, until I run out of rows. For example, in C5, the answer is 2, because there are 2 NOs between YES#1 and YES#2 in coulmn B, and a 1 in C7, because there is 1 NO between YES(#2) and YES(#3) in column B.
View 5 Replies
View Related
Dec 2, 2009
How can I count the number of cells in a range that contain values that are greater than or equal to zero?
View 2 Replies
View Related
Nov 30, 2012
I have a column, that have different values in each cell.
I am trying to get the count if the value is NOT equal to Closed and or BLANK
My formula : =COUNTIFS(O7:O827, "<>Closed", O7:O827, "<>""")
still not working, it counts the blank cells !
View 4 Replies
View Related
Dec 12, 2013
I'm creating an Excel sheet with statistics for a yearly salary review.
In the document that the managers will fill in there is a column for the employees performance (+, = or -).
I want to use this to compare how much salary raise employees has gotten depending on their performance rating. This is all fin with the + and - just using the regular countifs formula, but when it comes to the = Excel refuses to count them?
View 2 Replies
View Related
Feb 15, 2008
In my workbook, I want to count how many duplicate words in 2 ranges.
Eg:
Col A are more than 10,000 words and Col B are more than 10,000 words.
I want to count total duplicate words in these 2 ranges.
View 9 Replies
View Related
Apr 8, 2014
I'm trying to count all cells in a row after the last number that was greater than 0. See my example spreadsheet. I have put the answers that it should be in to show what I'm after.
[URL]
View 12 Replies
View Related
Jul 2, 2014
I want to count the number of cells that have a value that is above the average of all of them. Ive tried the COUNTIF formula but no luck.
Sample attached : sample weds.xlsx‎
View 4 Replies
View Related
Jul 1, 2008
I receive spreadsheets which tell me where samples are located in 96 well plates. The plates' rows are lettered A-H, and the columns are numbered 1-12. So, for example, the first well is labeled A1, the 12th is A12, the 13th is B1, and the 96th is labeled H12.
When I receive the spreadsheets, there are cells that tell me which wells are occupied. For example a cell will contain "A2 - B7" or "D3-F12" (sometimes with the spaces before and after the "-", and sometimes not." I need a program that will tell me that "A2-B7" (or "A2 - B7") means there are 18 wells occupied.
I've tried a few things, but a lot of problems arise when I try to do anything with names like "A1" because excel already defines "A1" as cell A1. Do you guys have any ideas? Am I being clear?
View 12 Replies
View Related
Mar 6, 2012
A B C D
DATE EMPL1 EMPL2 EMPL3
3/6 NO NO YES
3/5 YES NO NO
3/4 YES YES NO
3/3 NO NO YES
I have a list of dates in column A, and a list of employees who either did or did not make a sale on that date in columns B thru D. What I want to do is automatically count the number of days between their sales for a 6 month period.
View 6 Replies
View Related
Mar 26, 2012
I am trying to count the number of cells in A1:A1000 which do not have either zero or blank in them.
View 4 Replies
View Related
Jul 27, 2012
I am trying to combine 2 counting functions to count the number of rows that a certain value in 2 different columns. I think the 2 formulae I am trying to combine are:
=COUNTIF(N3:N136,-1)
=COUNTIF(X3:X136,1)
i.e. the number of rows that have both "-1" in column N and "1" in column X
View 2 Replies
View Related
Jun 18, 2013
give me the formula to count the number of rows entered within a date range. i.e. how do i count the number of rows that contain dates in june 2013
View 6 Replies
View Related
Jun 18, 2002
I received this code and formula from this board some time ago. My question is, how do i edit the code (and or formula) so it will count any color i choose? (red,green,yellow,etc.)
Here is the code;
Function CountColor(Rng As Range, RngColor As Range) As Integer
Dim Cll As Range
Dim Clr As Long
Clr = RngColor.Range("A1:a100").Interior.Color
For Each Cll In Rng
If Cll.Interior.Color = Clr Then
CountColor = CountColor + 1
End If
Next Cll
End Function
Once i enter this code in a new module, i use the following formula to get my answer on number of colored cells;
=countcolor(A1:A99,D2)
View 9 Replies
View Related
Nov 24, 2006
I know the formula =LEN(A1) to get the number of characters within a cell - however is there a way to count the number of cells within a range that have a length > X (lets say 50).
View 9 Replies
View Related
Mar 26, 2007
I would like to count a column of cells and return the total number of cells that are colored yellow, for example......
Is there a way to do this in Excel/VBA ?
View 9 Replies
View Related
Nov 15, 2006
Is it possible to count the number of cells in a row which contain data?
View 2 Replies
View Related
Jan 13, 2014
I have this formula which is counting the number of cells in a column that fall within each calender month.
However, if there is a formula at the bottom of column B and C that yield a "", the formula breaks.
In my workbook, B/C:133 have a formula =""
I will need the formula in column E to work if there is a formula that yields a "" in column B and C.
View 5 Replies
View Related
Jun 23, 2009
How do I count the number of cells that have a value greater than 0 in a range of cells?
View 2 Replies
View Related
May 13, 2013
I'm trying to develop a new daily timesheet for my production workers, where non-production items are recorded in 15 minute intervals. The user would put in "Clock in" by the corresponding time, and the same for "Clock out" at the end of the day. Any non-production items will be type in next to their appropriate time. Since clock in and clock out times will vary, I need to set up a formula that searches the array of cells for the day, finds the "Clock in" and "Clock out" values, and counts any blank cells in between them. Basically the blank cells will equal production time, and the result of the Count function will be multiplied by 0.25 to get the hours.
I am having a very difficult time finding a way to set the "Clock in" and "Clock out" cells as the range for the Count function, because it won't always be the same cells. What would be the best way to automatically have excel find the cells containing these values and set them as the range criteria for a Count function?
The formula at the bottom was one of my initial attempts, but it didn't work. I took out the '=' for the screenshot, so that wasn't the problem.
View 5 Replies
View Related