Loop A Script A Fixed Number Of Times
Aug 9, 2006
I have a sheet with data in rows across several columns.
I want to copy the data from each row into a new sheet and save it with another name (which I already have ascript for), but as I have 10 rows , basically all I've done is copy the script 10 times and chaged the row numbers and nae to save as.
What I want is one script that does all I have now, but then loops back to do the next row down and changes the name to save it as as well (which is the person's name listed in the row)
View 9 Replies
ADVERTISEMENT
Feb 23, 2010
In my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
View 11 Replies
View Related
Jul 9, 2008
I am wondering if it is possible to create a formula in a cell that will divide whatever number is entered into that cell by a set or fixed number.
ie. I enter the number 9 in the cell and when I press enter, the 9 is instantly divided by 15 and the answer is displayed in the cell where I just typed the 9.
View 14 Replies
View Related
Dec 14, 2013
For instance I have a formula such as =sum(A1:A9). But imagine that the range is not always till row 9 but depends on the total number of rows that are in the table. How can I change that 9 so that it takes a number equal to the total rows in the table?
The final formula I want is not that simple one. It is actually
=INDEX($F$1:$F$1047,MATCH(1,INDEX(($G$1:$G$1047=G2)*($L$1:$L$1047<>"47200")*($L$1:$L$1047<>"47700"),0),0)).
I want to change 1047 by the relevant number of rows. Also, I do know how to do it in VBA, but I have a problem with the length of the formula there (not that one, but other bigger than that)
View 5 Replies
View Related
Mar 1, 2008
I did a search myself, then went through the 5 pages the "Post" function brought up. I'm sure it's been asked before, I must just not be using the right words
I need to tell every cell in one column to multiply itself by a firm number and a percentage. Ex: Column F will be the result of $77.80 times 75 percent all the way down the column. Column G will be $27.21 times 100 percent all the way down.
I could enter the formula into every cell, but I wondered if there's a way to just tell the whole column, only once, what it needs to do. PS-I work for an insurance company. The employees of a company want a spreadsheet showing exactly who pays exactly what. Ex: Their paystub shows $142.90 coming out of their paycheck. Their employer pays 100% of medical, 75% of dental. The columns would show Total, Employer Medical, Employer Dental, Employee Medical, Employee Dental.
View 2 Replies
View Related
May 22, 2009
I want to copy range B2:B5 value only and paste it 19 times from B12:B15, B17:B20, B22:B25, and on. The distance between any two pasted range is tow rows.
View 9 Replies
View Related
Nov 18, 2009
I've attached below a small part of my code. I am wondering if there is a way to do this, without copying and pasting something 30 times, but using a loop instead. As you can see there are a series of productsNumbers (30 in total, but this example is for 3). Each productNumber is a string that is actually a 5 digit number, so it can be an integer as well, if it has to.
I would like to code below to loop for as many products as there may be. The way that I have it right now does not work - I feel that I am missing something small or that there is no way to do this.
View 3 Replies
View Related
Apr 13, 2008
I have a routine that loops through a block of records containing two time fields. One is the same for every record (let's call it the start time) the other, which varies, is the last time at which an event happened before or after the Start time (let's call it the Event time). so a pseudo block of data may look like this;
A B
15:00:00 15:01:27
15:00:00 15:00:05
15:00:00 14:59:27
15:00:00 14:59:01
15:00:00 14:48:45
I need to identify the record that has the closest time in column B to that in column A (in the example above that would be B2 (15:00:05). I then save that record off and eliminate the rest for that time block. The whole subroutine then repeats for the next block of data and so on down the list, top to bottom ( times are in descending order). Note also that times will never span the 24-hour point - they all occur betrween 12:00 and 22:00 on any given day.......
View 2 Replies
View Related
Mar 10, 2009
How can I shift the range of cells I want to calculate an average from? For example I want to get the average of cells A1 to A10, so =AVERAGE(A1:A10) And next I want to get the average of cells A11 to A20, so =AVERAGE(A11:A20). But I don't want to manually change the data or delete rows all the time.Is it possible to do something like: =average(A1+10:A10+10)??
View 4 Replies
View Related
Sep 24, 2011
I'm struggling with getting my Excel worksheet to fit nicely on the pg for printing to .pdf. I could tinker with column widths manually to work this out for a printed report. But I need to print a couple hundred reports with varying column widths, so I need a vba solution.
The context is that I'm using vba to process two sets of interlinked data on a worksheet. I only want to print one set of data, and keep the second set out of the print view. To do this, I'm keeping the first set of data in columns 1 to 10 and the second set of data in columsn 21 to 30. I set the print range to only include columns 1 to 10.
This works fine for keeping the second set of data off the printed pg. The problem is that there is always a gap between the end of column 10 and the maximum width of the printed pg. Given the formatting of the report, this doesn't look very good.
I know that page setup offers the "fit to" option. This would work if I wanted to fit everything on the worksheet on the pg, but I don't. I just want to fit columns 1 to 10 to the pg. Is there a way to do this, allowing for varying widths in columns 1 to 10? Is there a way to do it via vba?
View 2 Replies
View Related
Feb 8, 2010
I was playing aroung some VBA code, but the code executes 98 times and I don't know why. For example, range A1 contains 5. When I type, say 3, in A1, I want A1 to show me 8 (5+3). Then I may type 10, in this case A1 must show 18 (8+10). And so on. I decided to place entered values in different column, then sum them in A1 with below stated code
View 3 Replies
View Related
Sep 11, 2013
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
View 4 Replies
View Related
Sep 30, 2013
I have a rand () which provides me a different number upon calculate. I would like to run a loop for 1000 times and take the value and copy and paste in a range.
The below sorta works, but at times it stops or doesn't work at all. I have a loop for the counter and the for each to place the value into the cell and have it run over and over and placing the value in the next cell underneath. I have the counter at 10 so I dont get stuck in some endless loop before I know it works.
Code:
Sub montecarlos()
Dim MCs As Long
Dim c As Range
Dim lCount As Long
Dim lNum As Long
lCount = 0
lNum = 1
Worksheets("MonteCarlo").Activate
[code].....
View 6 Replies
View Related
Mar 2, 2007
I am coding a macro that would take all information needed from an existing pivot to put in in a new report file.
Now the problem is that I couldn t get to paste the data (for some weird reason), so I did a loop that terminates with IsEmpty...
My problem is I have to write on loop per column, because I don t know how to tell excel to go to next column (that I know!) AND to the first row, which means doing an offset of (x,1), but how do you set the x for it to be adaptable if I change the length of the pivot table?
I really hope someone can help me with this, I tried to replace range("first cell") by cell(x,... and set x as a variable but i am not good enough obviously....
Here is what I have so far:
Dim k
Dim w As Integer
Workbooks.Add
ActiveWorkbook.SaveAs "C:Dokumente und EinstellungenCustomerServiceDesktopMonthlyReportAutomated.xls"
'iniatiation before loop
Workbooks("ChannelProductionlastestupdateJAN2007").Sheets("pivot").Activate
Workbooks("ChannelProductionlastestupdateJAN2007").Sheets("pivot").Range("a20").Select
k = Selection
View 9 Replies
View Related
Jul 2, 2014
How do I run this loop 10 times ....Then using a timer or system clock to restart it.
Code:
Public Sub Workbook_Open()
Dim ws As Worksheet
Do
For Each ws In ThisWorkbook.Worksheets
[Code]....
View 1 Replies
View Related
Aug 20, 2013
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
View 9 Replies
View Related
Aug 3, 2012
Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:
id
event_name
C83-858
sample_1_arm_1
[Code].....
View 3 Replies
View Related
May 28, 2014
I am trying to come up with a macro that selects values from one sheet and inserts them into another sheet. The number of values will change each time based on the user's entry, as well as the number of times that each entry should be pasted.
For example:
Entry: X | Y | Z
Number of Times to be Inserted to New Sheet 3 | 2 | 1
Result:
X X X Y Y Z
I have spent a while trying to figure it out, however the best I can come up with is using an array, but I can only get one value from the array to paste multiple times:
(*Note: In my testing, I didn't insert into new sheet or set up the array to handle different values, I was just trying to get the basic idea to work)
Dim A(1, 3) As Variant
A(1, 1) = Range("C3").Value
A(1, 2) = Range("D3").Value
A(1, 3) = Range("E3").Value
[Code].....
View 3 Replies
View Related
Nov 22, 2007
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
View 9 Replies
View Related
Apr 2, 2009
I have time start and time end and the difference between the two times. In a third column I have profit and want to calculate the profit per hour. When I divide the profit with the time spent I get a very very high number. If I for instance type in 1 hour of work and profit 100, then I get profit per hour 2400. (profit/hours spent)
On a side note I am trying to get the numbers as 24 hours and not use am or pm and in the spread sheet I get these numbers but in the box at the top where you see the formulas etc. it shows as am and pm. I have uploaded an example.
View 2 Replies
View Related
Mar 14, 2014
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies
View Related
Apr 16, 2009
I want a cell to tell me how many times the number 12 is in a group of cells. Is there a formula or something that will.
View 4 Replies
View Related
Oct 4, 2011
I'm trying to modify this line:
Range("A2").AutoFill Destination:=Range("A2:A10"), Type:=xlFillSeries
I trying to copy down a formula a set number of times based on a cell value or a declared value.
View 5 Replies
View Related
Apr 24, 2008
Attempting to do a countif as follows
Count the number of times that F2:F65536=Q1 where E2:E65536 also = N2.
So for a given row, the cell in col F needs to equal Q1 and the cell in col E needs to equal N2 for it to count.
View 9 Replies
View Related
Apr 24, 2008
Id like to run a Sub Macro a certain number of times, dependant on the amount of data provided. It could be that I need to run it say 290 times today, but 500 tomorrow.
Is there a bit of code to say, run the macro '500' times?
At the moment, if I set it to run more than it would need to it debugs and gives a compile error, procedure to large.g
View 9 Replies
View Related
Feb 3, 2009
Is it possible to determine how many times a formula will be used? Here’s my problem.
I have items that are bought, and then altered. So I need a cell to determine how any times my ‘IF’ formula is used. My current formula is:
Formula entered into D3.
=IF(D2>0,D2,””)
Row 2 is the amount and Row 1 are dates.
If I drag the formula to the right, E2 will be equal to 0 so will enter 0. But I need it to say what ever is in D2 3 times. (As this particular item takes 3 weeks to do) So D2 & E2 & F3 will all have whatever was entered in D2.
View 9 Replies
View Related
Apr 2, 2009
I have a start time in one column, end time in another and a column with the difference between the two. In another column I have profit. In the last column I have profit per hour where I divide the profit by the hours, but since one is hours and the other is a number it gives me an error.
View 4 Replies
View Related
Jun 16, 2009
I have this list with articles at work. It looks like this:
1
1
1
2
2
2
3
3
3
etc
I wish to find out if any number in a column appear more then 3 times, and if it does, return that number to be. Is this possible with a formula? I've tried, but didn't succeed.
View 2 Replies
View Related
Feb 11, 2014
I have a user form that opens when you pick (team1) sheet, I made a chart after week 8.
is there anyway using the combobox's to do a count on who was who's partner? so at the end of the league I know which 2 played together the most?
View 8 Replies
View Related
Nov 26, 2006
I have a problem with LAN function. I have following formula to count how many times appears number 2 in a box: LEN(I5)-LEN(SUBSTITUTE(I5,"2",""))
in I5 I have 1,2,3,12,34,22,21 . Outcome is 5 which is not what I need. What I wanted to do is to get output of how many times appears number 2, not how many times appears expression 2 (it counts also 22, 21, 12, 2) . The output that I need should be 1 since number 2 appears just once in the box.
View 14 Replies
View Related
