Loop Through Each Column And Colour Red If Below X
Aug 29, 2012
I'm trying to build code to loop through each column of data and colour the cell red if it is below x.
Problem is each column has a dynamic number of rows, it changes, and I have a dynamic number of columns as well.
I currently have code to do it on 1 row, but am trying to loop through all filled columns with no success, heres the code:
Code:
mycol = Cells.Find("", SearchOrder:=xlByColumns, _ LookIn:=xlValues, SearchDirection:=xlPrevious).Column
MsgBox mycol
[Code]....
View 8 Replies
ADVERTISEMENT
May 27, 2014
I'm trying to add colour in column E5, yellow after 34 months from the date in D5 and then red in the same E5 after 36 months. Is it possible?
Then if the date in D5 is updated, I want E5 to become white again.
View 1 Replies
View Related
Jul 28, 2006
I have created a column chart and am now trying to change the colour of one
of the bars. Here is the code I am using:
With chtChart
ActiveChart.SeriesCollection(1).Points(2).Select
With Selection.Interior
.ColorIndex = 3
.Pattern = xlSolid
End With
End With
View 4 Replies
View Related
Oct 3, 2012
I would like it to loop through all the charts on the "Graphs" sheet.
It works well but gives a "Run-time error '1004'" Application-defined or object-defined error afterward that I would like to get rid off.
VB:
Sub Colour_Chart_working()
Dim rngColors As Range
Dim rngCell As Range
[Code].....
View 1 Replies
View Related
Feb 13, 2014
Is it possible to search Excel by cell colour, i.e. font colour...and then change the said colour to another one?
View 3 Replies
View Related
Apr 17, 2014
I have a lookup that gives and RGB colour code in Cell A1; for example 186, 206, 140.
I'd then like Cells R10:V15 to fill with the RGB colour based on the result in A1.
View 2 Replies
View Related
Oct 5, 2007
Column A = Dates in ascending order
Im after the code for searching this coloumn for 8 dates i have listed elsewhere and then i would like it to apply rose colour just to the dates in column a.
how do i link with specified dates?
With Selection.Interior
.ColorIndex = 38
.Pattern = xlSolid
End With
End Sub
View 9 Replies
View Related
Feb 22, 2007
i am trying to do is match 2 columns data based on a condition ie i have data in column "b" of sheet called "balance" data is variable this column has unique indentifiers i want to look at another column and match the uniques identifiers in another sheet if the cell value in column "D" = "please investigate" otherwise do nothing, the (column f) it will be looking up too is in sheet called "hi- port" so if cell value in column "d" of sheet"balace"= "please investigate" match values that are same from colum "b" of sheet "balance" to that of column (f) sheet called "hi-port"
i would like to colour only entire row of sheet called "hi-port" when the data matches to other sheet ie from columns "f " too " b". colour can be any colour
igonre my ranges they are wrong just used as example
Sub start()
Dim oWs As Worksheet
Dim oRngCheck As Range
Dim oCl As Range
Dim cCola As Range
Dim cColb As Range
Dim rngIRd As Range
Dim rngACs As Range
Dim Match As Boolean
Set rngIRd = Range("a1", Range("a65536").End(xlUp)) 'define the rang
Set rngACs = Range("b1", Range("a65536").End(xlUp)) 'define the rang
Set oWs = Worksheets("balance") 'change to suit
'starts at b2 to llow for header row.......................
View 4 Replies
View Related
May 23, 2014
A column of cells can be 1o different shades of green according to their value (achieved by using conditional formatting.) I want to arrange that at a certain time all the cells of a part of the row of a formatted cell are the same colour.
View 4 Replies
View Related
Feb 21, 2014
I have a code that inserts a new column after every 7th column. I want to include a formula where every 7th column value is subtracted from the values present in the column before the 1st, or you can think of it as subtracting 7th column of the present group from the 7th column of the previous group. Example: The range of my data starts from col F, then
F (7th) New Column (G) H (1st) I (2nd) J (3rd) K (4th) L (5th) M (6th) N (7th) New Column (O) P (1st) Q (2nd) R (3rd)
So, New Column (O) = N - F
and the next New Column (W) = V-N ...
NOTE: Column G can be ignored.
I want to add a looping function to this so that it will continue to subtract for the other respective columns as well. How do I incorporate this into the following code?
[Code].....
I'm using Excel 2013.
View 2 Replies
View Related
Dec 6, 2006
on the syntax of things in VBA. here's a description of what i'm trying to do:
1) loop through a particular column ("N"), and compare the values (if not blank) with corresponding cells in another column ("V"). i.e. - comparing N1 to V1, N2 to V2, etc...
2) run If, ElseIf statements to display appropriate values in different column ("O"), but on the row that corresponds to the row the values in Step 1 are compared. i.e. - if N1 > V1 then cell O1 = value; if N2 > V2 then cell O2 = value; etc...
here's an example (but obviously not in proper syntax). hopefully someone can help me convert it to Excel VBA:
Function CalculateFR()
Dim Col1 As Column = ColumnN
Dim Col2 As Column = ColumnV
Dim Col3 As Column = ColumnO
Dim Cell As Cell
Dim IndexValue As Integer
For Each Cell In Col1
If Col1 > Col 2 Then
IndexValue = 5
Else If Col1 < Col2 Then
IndexValue = 4
End If
Next Cell
If Not IsEmpty(Cell) Then Col3 = IndexValue
End Sub
View 7 Replies
View Related
Sep 27, 2007
I had a problem finding something then deleting the column, I tried to alter the code from that thread to solve a new problem and I am close (I think), but not quite there. I need to find the column "Group" and merge it with the column "Sex" which is offset by 1 column. This code will go through and find the column "Group" and merge for the first cell, but will then get stuck in a loop just concatenating "Sex" to the end continuously. I need it to concatenate both columns entirely together. Any simple fix to what I modified? Previous thread should you be interested:Find Part Text On All Sheets & Delete The Column.
View 9 Replies
View Related
Jul 17, 2014
So I have a macro that colors the selected cells in a certain color. Now im looking for a code that will switch that color every 7th cell, the cells will only be selected horizontally. For example:
if the selected range is 10 cells, 7 of them should be in one color and 3 of the should be in another. But if the selected range is 15 cells the first 7 should have one color and the next 7 should have another and then the last one should have the first color again, and so on..
View 6 Replies
View Related
Dec 7, 2009
I have a worksheet and it has some information on it (ill show an example in a min). will all the information i need is in one column. there is only the name of the item that i need the rest can be deleted. like so ........
View 12 Replies
View Related
Sep 29, 2008
I am trying to loop through columns and rows to get the sum of each and delete that column that equals zero. I have-
Dim lastrow
Dim r, c As Integer
Dim RowSum
RowSum = 0
ActiveSheet.UsedRange.Select
lastrow = Selection.Rows.Count
For r = 2 To 80
For c = 2 To lastrow
RowSum = RowSum + ActiveSheet.Cells(r, c).Value ' here I get error Application-defined or object-defined error
Next c
If RowSum = 0 Then
ActiveSheet.Cells(r, c).EntireColumn.Delete
End If
Next r
What am I doing wrong?
View 9 Replies
View Related
Nov 2, 2009
The below code is supposed to loop through column a and create a copy of a worksheet change the name of the worksheet to the value found in column A
I need change the loop so it starts at A8 and Ends at A59. I have no Idea how to do this.
Sub AddSheets_FromList()
Application.ScreenUpdating = False
'assumes starting macro on first value in date list
Dim ListCount As Integer
Dim NewSheet As String, LastSheet As String
LastSheet = "Weekly Results"
ListCount = 0
View 9 Replies
View Related
Apr 17, 2014
im looking for a macro that will take away the free stock value from the values in the following columns until the value reaches 0 then subtract from the next column with a value in it until there is no more left in the free stock to subtract. if the value reaches 0 it can be blank.
so for example as shown in the image attached cell b2 shows 150 in free stock, then the next column with a value in is d2 which shows 100 so takeaway until this reaches 0 which leaves 50 and this can be shown as blank now, then move to the next column which is e2 and this shows 30 so this can now be blank also, finally f2 shows 50 so minus the remainder from the original 150 which 20 and this should now be 30.
my data is in a pivot table so a paste special to another sheet may also be necessary. The amount of columns could also vary due it being a pivot table.
View 5 Replies
View Related
Jan 26, 2009
I have created a macro that loops through column 4 and gives the value of 2 other cells acording to what is found.
The problem comes when the macro only works sucecefully if i click on a cell in that column. Therefore i think the macro is not doing this.
Im sure that i have used the right code does anyone know what is wrong.
View 12 Replies
View Related
Feb 5, 2009
What the easiest way of looping though the values in a column in a macro? How to you "call" the cells in the macro?
View 4 Replies
View Related
Mar 18, 2009
how to write a for loop for this coding.
considering x as row,
i want to check the value in column1 for n rows.
View 7 Replies
View Related
Feb 24, 2012
Code:
Private Sub Workbook_SheetSelectionChange(ByVal Sh As Object, ByVal Target As Range)
Dim rw As Integer
Dim LastRow As Integer
LastRow = Sheet8.Range("B16:B300").End(xlUp).Row
For rw = 16 To LastRow
[Code] ........
Cannot get the loop to run. I am trying to make it so the loop will stop when it reaches the last non empty cell.
View 6 Replies
View Related
Apr 15, 2013
I have a number of strings in adjacent columns in the same row, like so.
Coulmn1 Column2 "blank" Column3
If the cell is blank I want to hide the respective column .
I'm guessing the code will roughly take the form of the code below with an if statement nested in a for statement.
Sub (test)
With Range("BD22")
For i = 1 To 10
if range (i,22) = "" then hide
else don't hide
.Offset(1, 0).Formula
Next i
End With
View 1 Replies
View Related
Aug 17, 2007
I need to create a loop within a loop. First loop works fine as follows:
-------------------------------
x = 0
Dim DirArray(0 To 80) As String
Dim intI As Integer
For intI = 0 To 80
DirArray(intI) = Range("start").Offset(intI, 0).Value
Next
For x = 0 To 80
lob = DirArray(x)
Range("lob") = lob
Calculate
Sheets("WBB LOB Summary").Select
ActiveWindow.SelectedSheets.PrintOut Copies:=1, Collate:=True
Next
----------------------------
At the 'start' point, first loop works downward through rows. Second loop would work across columns in each row within the first loop. I will have to use a variable for 'y' (the across value) b/c the number of cells containing data can vary between 3 & 9, but I have a COUNTA in each row setup to use as the variable.
So spreadsheet data would look like this with A being the 'start' cell:
A 1 2 3
B 1 2 3 4 5 6
C 1 2 3 4
I need to pickoff A1, A2, A3, B1, etc, picking up every sub-category on the sheet.
View 6 Replies
View Related
Oct 1, 2012
I have two worksheet. One worksheet (ws1) contains a list of item I want. The other sheet (ws2) contains multiple columns where the header (row 6) is named by item name.
I have the following code which deletes the entire column if the header name is not in the list contained in ws1 :
VB:
Sub delete_col()
Dim wanted As Boolean
Set ws1 = Workbooks("test1").Sheets("aaa")
[Code]....
First of all, this loop does not work properly since deleting the entire column shift them on the left, so when I first analyze column 11, if I delete it and then analyze column 12, the real column 12 now became column 11 and so on...
Secondly, this code is pretty slow. I am pretty sure I don't have to loop through my initial item list everytime I do Instr on a new column.
View 9 Replies
View Related
Apr 23, 2014
I have a workbook with 180 Sheest. I need to copy sheet name and paste to column Name. In the Column Year write 2013.Finally I need to all sheets as show below in in Sheet Farms. Doing this one by one is time consuming and with error risk. I think a loop can do this,nevertheless, I don't Know how to do it. Column size can be different in each Sheet
Sheet name Famr1
CodNameYearDescTotal1Total2ProvCnt
1234Apples200xxxyyyzzz
3412Bananas400xxxyyyzzz
2358Oranges500xxxyyyzzz
8956Pines800xxxyyyzzz
[Code]....
View 6 Replies
View Related
Sep 14, 2009
I am trying to use a code to run a loop and search in column B for a certain name and if it finds it I want it to then look at column P and if it finds that the result in column B is less than $1000 then I want it to cut the entire row and paste the row in another sheet. Here is the code.
View 4 Replies
View Related
Sep 25, 2011
I have Created the below macro, however I cannot figure out how to make it loop so that is continues to copy the next column over ( so go from column E:E , To Column F:F, and then To Column G:G), and paste the data into the same column (D:D or Range paste_range) everytime, and print.
Sub paster_print()
'
' paster_print Macro
'
'
Columns("E:E").Select
Selection.Copy
Application.Goto Reference:="paste_range"
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.Goto Reference:="Print_Area"
Application.CutCopyMode = False
End Sub
View 7 Replies
View Related
Apr 7, 2009
I want a marco that can "find & replace" in a column, let's say K. Let's just say I want to find "AAA" and replace "BBB" and "CCC" and replace "DDD", I just need the code so I can change it myself. It will be more than 40+ replacement.
View 9 Replies
View Related
Jun 28, 2006
I have a range of cells which I wish to print to a .txt document. However, I would like these cells to stay aligned, one on top of the other. I am currently doing that by finding the cell with the widest piece of data for each column, and storing the width that each column needs to be to an array of integers. Then, when printing out the range, I simply add spaces to each piece of data its width is the same as the max column width. I am finding the max column width using the following loop:
'find the width for each column and store in col_width()
For cur_col = 1 To total_cols
'skip the tag switches column
If cur_col <> 3 Then
max_data_width = 0
For cur_row = 1 To total_rows
cell_data_width = Len(Find_String_Diagnostics(diagnostic_range.Cells(cur_row, cur_col)))
If cell_data_width > max_data_width Then.................
View 5 Replies
View Related
Mar 29, 2007
I want to make a vba (macro) for excel that will look at the column to the left of an active cell and if there is a formula there drag it over to the right into the active cell and if there is not a formula there copy and paste value of what is in the active cell into itself deleting any formulas that may have been there. on top of that if the cell to the left of the active cell has no boarding I need to copy it and paste format to active cell. I need it to continue a number of times to be decided in cell A1 and just go down the column doing this. Please help, I know it sounds hard but I need it for 10,000's of lines of code and really cant do it by hand ...
View 8 Replies
View Related
