I have 4 work sheet 1st work sheet is Main, 2nd Clients, 3rd Pickup and 4th delivery In the main sheet i enter the information and one i click on add it send and save the information to their appropriate sheet what I want to know how should i create loop that can work at the same time when i press ADD so that is save only the information that does not exist.
View 2 Replies
New here, I wanna do a "Prevent Duplicate Entries" into my column i try the following: http://www.mrexcel.com/articles/prev...duplicates.php
http://www.theexceladdict.com/_t/t040818.htm
They all work well but if I'm using copy and paste It doesn't work! why is tat so?
Second issue will be i'm wanna do prevent duplication for the whole column not just one cell.
I made a userform and through this form I add my data into excel sheet. one of the colume is CODE. Want:
When I click on the frmEntry SAVE button, I want to check for duplicate on column CODE
How prevent duplicate when entry from list?
Attachment file : testing.xlsx
I have one main tab which I pull data from other various tabs. To match data the data, I create a "common unique ID", in other words I create a column on each tab and connect various cells with the ampersand.
So in each of the various tabs (and the main tab), I'll have a column with something like =A2&B2&C3
If the "unique ID" matches between the tabs it will pull back the desired phrase, or it will be left blank. (Just using an =IF(ISNA) formula)
If you have followed so far, on my main tab, I have a column for each of the various tabs. The information I am trying to match could be on any of the tabs, so I need a column using an =IF(ISNA) formula to attempt to match each tab. So, on the main tab, there are several columns which might have the phrase I am looking for. I use another ampersand function to add those columns. My problem is that occaisionally, what I am looking for is on multiple tabs. So, if I am normally pulling the phrase "Pending Loans Report" when a match is made, if it is on two tabs, the cell will add it twice "Pending Loans ReportPending Loans Report"
I realize this is confusing, so I attached a spreadsheet. The "main" tab I was referring to is sheet1. I really simplified it down to post here, but I think the main idea of my problem is still evident. The problem is line 15. Note how column M has "Pending Loans ReportPending Loans Report" - I'd like it to only say this phrase once. The macro pastes special values at the end, but I've highlighted some cells in red which show the formulas I used for that column. Columns N, O, P, Q, etc. all have virtually the same formula.
I've got this code for prevent duplicate entries, But I wondering if it's possible to add a copy rows to it? For Example
Columns C
ItemID ItemName
11 QWE
22 ASD
33 ZXC
So now I enter 22 in ItemID for this working code it will pop up a MsgBox saying Aready exist, Is it possible to add a code so that it will copy the existing copy and paste into the active row?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
Dim ans As String
Const myCol As Long = 3
If Intersect(Target, Columns(myCol)) Is Nothing Then Exit Sub
Application.EnableEvents = False.........
I've got this code for prevent duplicate entries, But I wondering if it's possible to add a copy rows to it? For Example
Columns C
ItemID ItemName
11 QWE
22 ASD
33 ZXC
So now I enter 22 in ItemID for this working code it will pop up a MsgBox saying Aready exist, Is it possible to add a code so that it will copy the existing copy and paste into the active row?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim r As Range
Dim ans As String
Const myCol As Long = 3
If Intersect(Target, Columns(myCol)) Is Nothing Then Exit Sub
[Code] ........
I have a worksheet that you can enter in
Forename, Surname, Area, D.O.B
This has a macro assigned that copies the data and pastes it into another worksheet at the next available row.
Now this works fine, but I want to be able to identify if the data already exists in the other worksheet then prevent it from being pasted and give an error message that the person already exists in the database.
Is this possible?
I have a huge worksheet with 26 columns and 1200 rows. This worksheet is updated by 4 people everyday. Column C, H, N & R are updated daily by these 4 people so these are dynamic columns so to speak. I would like to have a VBA that informs that particular individual when he enters a duplicate data, maybe a popup saying duplicate entry.
View 9 Replies View RelatedOption Explicit
Dim myCount As Byte
Dim myColumn As String
Dim myRow As Long
Sub Worksheet_Change(ByVal Target As Range)
myCount = 0
If Range("B" & myRow).Value <> "" Then myCount = myCount + 1
If Range("C" & myRow).Value <> "" Then myCount = myCount + 1
If Range("D" & myRow).Value <> "" Then myCount = myCount + 1
If Range("E" & myRow).Value <> "" Then myCount = myCount + 1
If myCount > 1 Then....................
The above code pops up the message box when a second entry is made within the specified range, but OK button does not function, contents are not cleared, and Excel locks up.
I tried to solve above problem using Data Validation formula. Data validation does not work if somebody copy paste the duplicate values,it works when somebody types duplicate values in next column. So if I want to enter lot of urls to a column then it is completely impossible to type so must have to copy paste from the browser. I have attached a sample sheet, howl to solve this problem either using formula or using Data validation in sample 1 and sample 2 respectively.
View 1 Replies View RelatedI have a entry form in which i want to register customers. the first field is the customer number (which is unique(created by me) for every customer). This is TextBox 1 in the document. I would like to search for duplicates in worksheet 2, collumn A, when pressing "enter" to move from TextBox 1 to TextBox 2. A search for duplicates should start and a message should appear " duplicate found" if found, otherwise continue to TextBox 2 for further entry of information.
Please see my attached document for clarification.
Is there a way i could put a validation on a text box that doesn't allow the user to enter a value that already exists in a given range. The object being to avoid duplicate entries.
View 5 Replies View RelatedI've got the following code which opens/gets the excel files from a specified directory and imports them into an open workbook. I've added a GoTo Error before my loop which checks if there are any files in the directory and shows an error message if it's the case. Problem is since the loop goes on till there are no more files in the directory, it goes back to the error. How to change that ?
View 3 Replies View RelatedI have a created recording sheet (attached) for the purpose of recording moths. I send this sheet out to those recorders who live in my county and at the end of the year they send the filled in sheet back to me. Over time I have put safeguards onto the sheet to ensure that I get the cleanest data returned to me. However, there is still one area which is giving me problems - users entering duplicate records.
Some formula which will stop recorders from entering those duplicate records. There are many columns on the sheet which recorders have to fill in with information, but as far as the duplicate records are concerned it is where the same information is entered into columns C, F and J that I'm having a problem with. It would be great if, when the same information was entered in these columns that the affected cells were highlighted in some way and if an error message appeared saying 'Duplicate record, either delete or alter grid reference'
I have entered two test duplicate record on the 'macro moths' sheet of the attached file : Test Recording sheet.xls
How do I set up a custom validation formula to prevent duplicate enties?
For example I I've already enter the song name 19 and Paul Hardcastle (BandName), how do I set it up where I can not enter that combination again on a row?
I was wanting to use a custom CountIF function but I could not get it to work.
A
B
Song
BandName
19
Paul Hardcastle
[Code] ....
I want to prevent user from entering duplicate text or numbers in a cell using the Data Validation.
View 9 Replies View RelatedI am working pivot tables off of one large excel spreadsheet for my data. I have multiple pivot tables on each of 5 worksheets. The problem is this. Every other week I am sent an updated spreadsheet with the same column names each week which I then copy and paste it into the spreadsheet of the last one. When I refresh the pivot tables, I end up with duplicate field sets. For example, on column in the original data sheet is gender. On the first sheet I went through and renamed the "M"'s and "F"s to be "Male" and "Female" so that it is better looking when printed. Now when i get the new information and copy and paste it to rplace the old, and refresh the pivot tables, I end up with "Male" "Female" AND "M" "F". Now the "Male" and "Female" fields are empty and the "M" and "F" fields have the information. Is this a result of me renaming the fields?
View 5 Replies View RelatedI have created a userform with 3 text boxes. It also has three buttons - clear, Cancel and Generate record button.
User form takes entries in the three text boxes and on clicking the Generate Record button, the values of the three Text Boxes are inserted in Column A, B and C of sheet1. The columns keep on populating with new data on each submit in the row below the last record.
Now it is required to enter data only if the value entered in TextBox1 is new and has not been entered previously in column A. If textbox entry is already aviailable in column A, a message box of 'Record available' shoud be prompted and the text entry must not be allowed until the data entered in TextBox1 is not unique.
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc
Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example
John Red
Julie Red
Bob Blue
John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
The code itself functions as desired however i am getting the vba message "code execution has been interupted". However if i comment out the line
ActiveSheet. Range("Y6:BC6").Delete Shift:=xlUp. Then all is well - so i'd say that is the culprit.
Sub Test()
If Left(ActiveSheet.Name, 5) = "query" Then
Dim intRow As Integer
intRow = ActiveSheet.Range("Y4").End(xlDown).Offset(1, 0).Row
If intRow > 25 Then
ActiveSheet.Range("Y6:BC6").Delete Shift:=xlUp
intRow = intRow - 1
Else
End If
' Runner 1
ActiveSheet.Range("Y" & intRow).Value = ActiveSheet.Range("A5").Value
ActiveSheet.Range("Z" & intRow).Value = ActiveSheet.Range("M4").Value...................
With Sheets("regrade pharm_standalone")
For Each r In .Range("standaloneTerritory")
If r.Value = "X101" Then
r.EntireRow.Copy
Sheets("X101").Range("A1").End(xlDown).Offset(1).PasteSpecial xlPasteValues
End If
Next r
End With
-------------------
I need to repeat this loop for values from X101 to X151. In all cases, the sheet name is equal to the value I'm looking up (eg: value = X102 goes to sheet X102).
I have a named range called 'territories' that contains the list of X101 -> X152.
I'm hoping to make the code perform the loop for each of the territories without my having to copy & paste and change the 'X101' 51 times as this would seem a rather silly thing to do!
I have a worksheet that has 3 duplicate values in a particular column, I need a macros that will highlight two of the duplicates row and then another macro to delete the entire row. The duplicate element are in column R. find attached worksheet.
Copy of OCL 2010 (3).xlsx
I have a spreadsheet with 3300 rows. In column A there is a list of company names and in column H there is a corresponding Sales Rep name.Column A has many duplicate company names. I would like to run a macro that will find the a company name and then delete all the rest of the rows that contain that same company name.
Attached is a sample of that spreadsheet.
I feel as though I have spent enough time searching the previous posts to ask this question.
I have a 4 column sheet, column B has many cells with identical data. I want to delete all the rows that that have duplicate data in column B.
COLUMN A= Car Makers
COLUMN B= Models of cars
COLUMN C= color
COLUMN D= owner
I want to end up with rows that each contain unique info in COLUMN B.
I am using the following macro to insert the word "Duplicate" in the first blank column next to a duplicate row. My data is sorted by the first column. Data Example:
12345 a
12345 a DUPLICATE
11111 b
23123 b
Here is the macro I am using and it does not work. It marks the first duplicate it finds then goes into an infinite loop. Any Idea where I went wrong?
Sub MarkDupes()
x = ActiveCell.Row
y = x + 1
Do While Cells(x, 1).Value <> ""
Do While Cells(y, 1).Value <> ""
If (Cells(x, 1).Value = Cells(y, 1).Value) Then
Cells(y, 3).Formula = "Duplicate"
Else
y = y + 1
End If
Loop
x = x + 1
y = x + 1
Loop
End Sub
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100
101
102
105
Col D
6
6
5
5
I have some code but I still need to do a considerable amount of tweaking to it. Currently my code is only deleting the duplicate values in Col A. I am having difficulty summing the values in Col D as well as deleting the entire row.
Here is my code thus far....
-------
Public Sub FindDuplicates()
For RwCnt = 1 To (Worksheets(1).Cells(65536, 1).End(xlUp).Row)
SrchValue = Worksheets(1).Cells(RwCnt, 1).Value
If Len(Trim(SrchValue)) > 0 Then
With Worksheets(1).Range("a1:a" & Cells(65536, 1).End(xlUp).Row)
[Code]....
I have 4 columns in my spreadsheet. I am trying to find any duplicates that may exist in Col A, sum values in Col D, then delete the entire row. So far my sheet before I run my vba code is this.
Col A
100
101
102
105
100
101
102
105
Col D
5
4
2
4
1
2
3
1
After my code is run, I need for my spreadsheet to look like this
Col A
100.........................
Macro which loops through a number of files and calls the same macro in each of them. Unfortunately when I add "Application.Run..." to the code, it no longer loops through the process and instead stops after updating the first file in the loop. If I remove the "Application.Run..." code and add any other code, the loop works fine and it continues through the process repeating all the steps for each file found.
Why it stops after one file when using "Application.Run..." to call the macros?
NB I have a list of path and file names starting in row 8 of columns A and C. Each file in the list has a macro called UpdateS1 and promoupdate1.
Sub C_Run_Loop_Macro()
Dim lastRow As Long
Dim i As Long
[Code]....
I have working code that returns a row number within a for loop based on parameters I set.
Each time the for loop runs I would like to store this row number, then after the loop has finished, delete all stored rows.
Code:
for rowNum = 1 to x (some variable end row number which I already have worked out using End(xlUp).Row)
if x = y then
*storedRow = rowNum
end if
next rowNum
*
Lines with a * are the bits I can't work out. I've been trying to understand arrays by reading posts on what other people have done, but I can't fit (or fully understand) the reDims, or reDim preserves into my code. I've seen what appear to be quite complex ways involving uBounds and LBounds, but unfortunately I can't see how to use them.
All I want is to simply keep adding a row numbers to a variable, (i.e. row 2, 5, 20, 33, 120, etc) and then delete those specific rows.
