Data Entry By Textboxes On Userform - How To Prevent Duplicate Record Being Entered
Jan 3, 2013
I have created a userform with 3 text boxes. It also has three buttons - clear, Cancel and Generate record button.
User form takes entries in the three text boxes and on clicking the Generate Record button, the values of the three Text Boxes are inserted in Column A, B and C of sheet1. The columns keep on populating with new data on each submit in the row below the last record.
Now it is required to enter data only if the value entered in TextBox1 is new and has not been entered previously in column A. If textbox entry is already aviailable in column A, a message box of 'Record available' shoud be prompted and the text entry must not be allowed until the data entered in TextBox1 is not unique.
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example John Red Julie Red Bob Blue John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
I am trying to get two text boxes on a userform to populate a third box on the form when the user inputs the data in both of the first two boxes. I am pretty sure i need to use a change event, but I am not sure how or what triggers them. so I have:
[Code] ....
but they don't work when I put data in VSShortPrem and VSLongPrem textboxes. Do I need to call them to the userform module?
I have a spreadsheet that uses a Form for Data entry. Each record has ID, Name, State, and about 20 more columns of information for each ID.
The data entry is working well.
What I need now is to add a check for a UNIQUE ID. If they are adding a new record I need my form to return a message if the ID they use is already in the database. So if they enter XXXXX and that is in the file already - they should get a message that XXXXX is already in the database and to please enter a new ID.
And once they fix XXXXX to XXXXY then the record is added.
I have a userform with 8 text boxes and users have to enter different numbers separated by commas like 1,5,6,15,28 and so on.
I want to put a validation that if a number is entered in any of the textboxes than the same shall not be allowed in any other textboxes. Even in the same text box, no duplicate number shall be allowed. ie if in a textbox 1,2,15 is entered , then in the same textbox also, user cannot enter 1 or 2 or 15 again.
I have a created recording sheet (attached) for the purpose of recording moths. I send this sheet out to those recorders who live in my county and at the end of the year they send the filled in sheet back to me. Over time I have put safeguards onto the sheet to ensure that I get the cleanest data returned to me. However, there is still one area which is giving me problems - users entering duplicate records.
Some formula which will stop recorders from entering those duplicate records. There are many columns on the sheet which recorders have to fill in with information, but as far as the duplicate records are concerned it is where the same information is entered into columns C, F and J that I'm having a problem with. It would be great if, when the same information was entered in these columns that the affected cells were highlighted in some way and if an error message appeared saying 'Duplicate record, either delete or alter grid reference'
I have entered two test duplicate record on the 'macro moths' sheet of the attached file : Test Recording sheet.xls
I have a huge worksheet with 26 columns and 1200 rows. This worksheet is updated by 4 people everyday. Column C, H, N & R are updated daily by these 4 people so these are dynamic columns so to speak. I would like to have a VBA that informs that particular individual when he enters a duplicate data, maybe a popup saying duplicate entry.
I am looking to create a macro that will create a new sheet when data is added on a summary sheet. Example.
1. Summary sheet called "Variations" contains columns that will contain the information needed for new sheet (Columns A to D)
2. When data is entered on "Variations" sheet: Column B, then macro automatically creates new sheet renamed to e.g. VO1 (Number used on "Variations" tab) and is a copy of "Master" tab.
3. Data entered in Column A to D on "Variations" tab is automatically entered onto new sheet created (e.g VO1). Shown is blue on attached file. Additional data is updated on "VO1" sheet and this then links back to "Variations" tab
I have a entry form in which i want to register customers. the first field is the customer number (which is unique(created by me) for every customer). This is TextBox 1 in the document. I would like to search for duplicates in worksheet 2, collumn A, when pressing "enter" to move from TextBox 1 to TextBox 2. A search for duplicates should start and a message should appear " duplicate found" if found, otherwise continue to TextBox 2 for further entry of information.
Please see my attached document for clarification.
Is there a way i could put a validation on a text box that doesn't allow the user to enter a value that already exists in a given range. The object being to avoid duplicate entries.
I'm having trouble while trying to use a variable in a cell reference. I have a sheet that is being used to record the time and date of data entered into the workbook. This sheet is divided into columns, each designated to a specific type of data. I have written a macro to enter the current time in the correct column, but that macro is embarrassingly long and complicated because I used a series of if statements to handle all the different data being entered. I'm trying to simplify by using vlookup, and assigning the column value to a variable, and inserting that variable into the cell reference.
Here is the line I need to insert a variable into:
I currently have a monitoring spreadsheet which my staff enter data into each month. There have been some problems with staff entering data wrong so I have decided to build a userform to prevent errors. I have 2 combo boxes one for selecting a month of the year and another for a particular call the user must enter data for. I want the userform to enter the data from the userform into specific cells in a specific area. e.g. If a member of staff entered data into the userform for February, Call 2 then it would appear in the relevant boxes.
I am adding up the value of a range of cells in one cell. What I want is If the value of the cell which is adding up the values of the range of cells exceeds a particular number it should throw an error.
This has a macro assigned that copies the data and pastes it into another worksheet at the next available row.
Now this works fine, but I want to be able to identify if the data already exists in the other worksheet then prevent it from being pasted and give an error message that the person already exists in the database.
I am working pivot tables off of one large excel spreadsheet for my data. I have multiple pivot tables on each of 5 worksheets. The problem is this. Every other week I am sent an updated spreadsheet with the same column names each week which I then copy and paste it into the spreadsheet of the last one. When I refresh the pivot tables, I end up with duplicate field sets. For example, on column in the original data sheet is gender. On the first sheet I went through and renamed the "M"'s and "F"s to be "Male" and "Female" so that it is better looking when printed. Now when i get the new information and copy and paste it to rplace the old, and refresh the pivot tables, I end up with "Male" "Female" AND "M" "F". Now the "Male" and "Female" fields are empty and the "M" and "F" fields have the information. Is this a result of me renaming the fields?
I have created a userform and a command button to bring up the user form but when I click on the command button and the user form pops up I am not able to enter any data, the entire page freezes
This is the code
Private Sub CommandButtoncancel_Click() unloadme End Sub Private Sub CommandButtonOK_Click() With Workbooks("RETS results version 2.xlsm")
I have designed a simple user form to populate a finding tracker spreadsheet. Updating the tracker works fine.
Although I only need to update certain textboxes in the user form, I find myself having to enter the same data in every textbox so that the next row of the spreadsheet is filled. In all cases, if a textbox is not updated for the next row, then the data should copy the data from the previous row.
For example, last data Transferred from the user form are as follows:
[Heading] Col A - Col B - Col C [Row 1] Apple - Red - 10
Assuming I would only update the textbox for Col C in the user form, the next row in my spreadsheet would look like this:
[Heading] Col A - Col B - Col C [Row 1} Apple - Red - 10 [Row 2] (empty) - (empty) - 20
As such, I would like to add a code that allows the data (Apple and Red in Col A and Col B) from the previous row to be copied automatically and only updates Col C with the new value 20.
Oh, I should add that I have mostly Textbox values (about 20 columns) in the spreadsheet with the exception of three columns with CheckBox values although I can always repeat the checkbox fields.
Sheet 1 is a sheet that has a shape with macro assigned to show Userform6.
Sheet 2 contains data that is displayed on Userform6. I use Userform6 to show statistical data that is on Sheet2.
Sheet 3 contains data that is input to ComboBoxes on Userform6 using the RowSource Property.
On Sheet 2, when I select Userform6, the data is correctly shown in all comboboxes and Textboxes......
On Sheet 1 when I select Userform6, only the comboboxes show the data...the textboxes do not show any data.
I do not want users to see the data on Sheet 2 which is why I want to show the Userform on a different sheet as the data sheet will be hidden from users.
Question is: How can I show Userform6 on Sheet 1 with all the data showing in textboxes?
So in this userform I am want it to add data to the main list of products. But, I ALSO want it to add to the specific list by selection of the data in the combo box.
It already adds the data to the main list. Now I want to be able to select the data in the combo box and have the userform data put in the specific combo box list.
In VBA editor it is the Inventory macro:
I want the macro to work exactly as it does right now, but I ALSO want the Combobox1 to dictate where Textbox1 and Textbox2 are added in a separate list on the products sheet.
I have two sheets one = where I am entering day to day data two = For getting result
Once I entered data in first sheet then I want date wise record in another sheet in which I will enter date. After entering date all the record will be inserted in another sheet from first sheet And main sheet will remain with all records
I am having some difficulties with my VBA code. It is a user form that prints the data entered on to a worksheet. However, I am having some troubles with the calculations I want it do. Here is code...
PHP Code:
Private Sub CommandButtonExit_Click() Unload Me End Sub
Private Sub CommandButtonClear_Click() Dim ctl As Control
I have a userform that I want to add to a button click event, to fill userform data into a different (already existing) workbook.
What I have is a userform for entering Purchase order information (Supplier, Date, PO#, Products, Descriptions, Qty's, expected dates etc.) What I am trying to accomplish with this particular button, is to 'Generate Purchase Order'... Have a seperate workbook, with a 'blank' pre-formatted formal purchase order that will be autofilled with said userform. The now generated Purchase Order ready for print/ save-as.
I've created a userform that will pop up automatically when opening my workbook. My workbook will have many worksheets identified by the employee's last name, then first name (i.e. Doe, John) Etc. I ideally would like the name entry in my user form to locate the correct worksheet based on the sheet name and then all of the other data in the user form be put in the next available/appropriate row and column, etc. of that particular sheet. This user form would save me a ton of time keeping my training logs up to date, instead of having to locate each employee tab manually and then enter the data and then look for the next tab, etc.
At the end of the year I'll manually go to each worksheet and balance that year's training time and cost (as you'll see from the attached example), but I'm hoping that the user form entry will identify that "yearly balance row" as having data and would skip to the next row to begin the next year's training entry. The "Enter Data" Button would place all of the user form data (other than the name) into the appropriate row/column and I believe my refresh button will empty the user form fields, but I'm hoping it won't delete the data that was just previously entered into the worksheet. (See attachment)
see in atteched file User-form "frmEntry" work fine to update the data in Trader worksheet. but i need help to program.for the "frmExit" which i program. u can look in to the database "Trader Worksheet" .it enter the data in next available row.instead of up dating the corresponding existing stock ticker.to sell the stock.also when i enter the second sell of stock it change the row which is already their.not in new row.
I have managed to put together a userform to input the data from a safety audit card to populate a spreadsheet so that i can generate stats etc (every ticked check box inputed a tick onto the spread sheet into the correct colum for the data, on resetting the form it went to the next line as per the userform database example available here). This was working fine as it only had 5 check boxes and although my code was probably a bit rough, it did the job. The code I was using is:...
