Losing Information During Copy
Jul 28, 2006
As you can see this macro copies a worksheet from one workbook to a new one. It is 14 columns wide by just under 700 rows long. I am losing information out of cells all over the place.
ChDir "H:HOMETIMCEXCELCOUPON_COUNT6_JUN"
Workbooks.Open Filename:="H:HOMETIMCEXCELCOUPON_COUNT6_JUNJUN_2006" + ".xls"
Calculate
Sheets("MONTH_END").Select
Sheets("MONTH_END").Copy
Cells.Select
Selection.Copy
Range("A1").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False .........................
View 2 Replies
ADVERTISEMENT
May 22, 2007
This is probably a simple one but I can't figure it out. I am building a workbook from scratch. It has about twelve of thirteen tabs at the bottom. On one of the tabs I would like to copy and paste a stand alone worksheet. The worksheet functions properly when it is stand alone. However when I copy and paste the worksheet into this new workbook none of the formulas transfer with it. I do get the cells filled in, but I would like to get the formulas.
I have done this before and it worked fine. In fact I can open a new workbook and copy / paste the worksheet into it and everything works fine. Again when I copy / paste it to this new workbook the formulas do not transfer.
View 4 Replies
View Related
May 19, 2009
I'm working on this sheet and i'd like to copy information from row "i,i", insert a new row below it and copy that information to the new empty row.
View 6 Replies
View Related
Nov 14, 2006
=IF(Week1!G38>Week1!G37,1,0)+IF(Week2!G185>Week2!G186,1,0)+IF(Week3!G111>Week3!G112,1,0)+IF(Week4!G111>Week4!G112,1,0)+IF(Week5!G111>Week5!G112,1,0)+IF(Week6!G186>Week6!G185,1,0)+IF(Week7!G186>Week7!G185,1,0)+IF(Week8!G75>Week8!G74,1,0)+IF(Week9!G112>Week9!G111,1,0)+IF(Week10!G223>Week10!G222,1,0)+IF(Week11!G38>Week11!G37,1,0)+IF(Week12!G222>Week12!G223,1,0)+IF(Week13!G111>Week13!G112,1,0)+IF(Week14!G149>Week14!G148,1,0)+IF(Week15!G112>Week15!G111,1,0)+IF(Week16!G75>Week16!G74,1,0)+IF(Week17!G111>Week17!G112,1,0)
Now all I want to do is copy this info from cell C8 to D8 but with the exception that I want to change the > to
View 9 Replies
View Related
Dec 24, 2006
I have a workbook that has close to a hundred sheets in it (see attached). I need to know how to get all of the information onto one sheet in separate columns like this: EMPLOYEE NO| HIRE DATE| NAME| VAC AMOUNT|WEEKS|VAC DATES| # OF HOURS|AMOUNT|PPE
If you review the attachment you will see how the sheet is read from left to right, so I would need the have the information in that order.
View 5 Replies
View Related
Jul 16, 2014
search sheets by the name of cell , like name would be 17012-23-12-45 i need search by the first 5 letters 17012 , because sheet name 17012 , it would be for a lot of sheets so i need to do it automaticaly , and then that specific sheet has been found i need to copy table from there and some pictures in there
View 4 Replies
View Related
Mar 27, 2013
transfer data from several sheets to a master data sheet. The problem I am having now is there are couple blank cells. My code just ignore the blank cells on the master data sheet and paste next to the last cell with content. For example I attached a test excel. with my code. I want to leave the blank cell as it is to keep the same product in one row. below is my code.
VB:
Sub Copypaste()
'
' Macro8 Macro
For Each ws In Worksheets
[Code].....
View 1 Replies
View Related
Jan 16, 2014
I am a complete amature at Marco's and formulas. I have been trying to create what i need but i am unable to get it to work. I have a worksheet named "Course dates incl. pursuit" which has a table which runs from B7 to J144 in the table it has date, number, name, location, job, area, notifified, on system and passed?. in that order. I want if the passed column which is in J if that has a Y in it to copy and paste into another worksheet on the next avaliable line, worksheet name "Master."I would like it in a slightly different order if that is possible they have the same titles on the table but would like it to go number, name, location, job, area and date. Running from B5 to G(end of spreadsheet). That is the main part i would also like to to copy and paste into another worksheet if the answer is "N" but the above part is the most important part. Due to the computer settings i am unable to attach it
View 6 Replies
View Related
Aug 13, 2014
What I would like a macro to do is take information from cells A1 to P1 on sheet1 and add them to the table in sheet2 and then I can save the workbook. The information in A1 to P1 is taken from other cells around the workbook. Once the information is in sheet 2 I can delete or change the informtion in sheet 1 without it affecting the copied information in sheet 2.
The next time I open the workbook I can enter the information in cells A1 to P1 on sheet1 then run the macro again and will then take the information and add it to the bottom of the table in sheet2 underneath the previous information that had been added - obviously the source of this information will now be deleted.
I will need to do this again and again building up the table in sheet2. The table will also use columns A to P like in sheet1.
View 7 Replies
View Related
May 19, 2009
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
View 2 Replies
View Related
Sep 18, 2009
In the attached file, I want to have the user select a receipt # and have it copy the information, for that receipt from the log, to the receipt tab. Then I want it to print the receipt. The macros that are in the file already, were created before I added a column for Receipt No., and don't ask for user input. File is attached.
View 3 Replies
View Related
Jan 22, 2013
I am trying to get information to copy from one userform combobox into a text box on another userform when pressing the command button,
View 5 Replies
View Related
Jul 10, 2007
Is there a way to copy the information in a Windows Explorer page into Excel?
For example, for any given folder or sub-folder in Explorer, I'd like to copy the NAMES of (i.e., not the file itself or the contents of the file) FILENAME, SIZE, TYPE, MODIFIED date, etc..
View 11 Replies
View Related
Sep 3, 2008
In the excel sheet bellow that I'm attaching you will see what I'm looking for.
View 8 Replies
View Related
May 30, 2006
I have a list of line entries for which I need to insert a variable amount of empty lines per line. (the variable amounts listed in a column to the right of my Active Row.
Unfortunatly I loose the ActiveCell's Value. During Debug it shows the correct cell and value, but after the Debug Step Over, the value shows 0 again. I include my
[code]
Sub IP_Insert_rows()
'
' IP_Insert_rows Macro
' Macro recorded 2006/05/29 by Joseph Clark
'
Dim GrpCtrVar As Integer
Dim LnCtrVar As Integer
GrpCtrVar = 3
LnCtrVar = Range("B8").Value
View 4 Replies
View Related
Apr 7, 2013
I have created a code in which the information from Sheet 1 copies to Sheet 2 correctly. Every time I input new information for my click event (ticket sales/amount received/change due) I want this information to be displayed in Sheet 2. However, every time I start a new submission, the information overwrites on the second Row so that only one submission is displayed. I need to create a history of all submissions from Sheet 1. Here is the code that I have to copy Sheet 1 to Sheet 2:
VB:
intRow = intRow + 1
If intRow = 1 Then
intRow = intRow + 1
End If
[Code] .....
View 2 Replies
View Related
Apr 26, 2014
I have a customer data base going across each row about payments/address/DOB etc. When i go to alter some information in certain cells the rows become uneven and the information for customer B1 will be for C1 instead. I'm not familiar with excel but what i did notice when scrolling down i saw an outline of uneven rows.
View 1 Replies
View Related
Oct 2, 2013
I have excel from windows 8 and I am trying to copy the information on one cell on a sheet to multiple sheets. I tried the click on one tab hold shift and click on the last tab and type the information or press F2 or paste the information. Well, nothing works.
View 5 Replies
View Related
Feb 28, 2013
I have been able to produce a column that gives me key date information. I might have many empty cells in that column before it hits another date. I need to get this data over to another sheet and place it in a row.
I am trying to get it to look like this:
B2(value), C2(value),D2(blank),E2(Value),F2(Value),G2(blank) etc depending on how many more elements are found in the sheet.
I am able to find topics that allow me to copy a range of data but not one that will allow me to copy a range then skip a cell.
View 4 Replies
View Related
Aug 17, 2009
i have the following code for sending a worksheet to a closed workbook
View 14 Replies
View Related
May 5, 2006
In the attached file (I'm sorry it is zipped, it was just too big), I gave you a snippet of my database. The actual one has 9000+ records. Over in Y4, you'll see the Sum of all the amounts (column X). Run the first macro, that is, Copy Dups, and you'll see it splits the item up by the numbers in column N. This works perfectly (or so it appears.) Then, run the Summary macro (the only other macro in there) and you will see that it pulls the Sums of each spreadsheet and places them on one nice overview page. The summary page. The only problem is, the total of the subtotals on the summary page do not match the total on the main (unadultered) page. I hope i am explaining this right. Somewhere in the macros, I am losing data from my spreadsheets so that the summary page is not equal to the un-macro'd data.
/scratches head
View 9 Replies
View Related
Dec 18, 2008
1. In whatever cell is selected when the macro is run, enter a new row.
2. Copy the information from the row directly above the new row and paste (values, formulas, formats, etc) into the new row.
3. Return to column P in the new row, i.e if the new row is row 11, then return to P11, for row 12 return to P12, etc.
I have tried recording the macro but because it is hard coded to specific rows, its not working. I have attached a sample copy of the sheet (had to zip due to the size of the file).
View 3 Replies
View Related
Apr 30, 2014
What I have is a master file that needs to pull info from other sources (a simple copy and paste)
those files are called Inventory_xxxx.xlsm . Inside the master file, there are cells with the number of the inventory.
What i need is a way to tell excel to check what number is in the cell, open the files with that number, get the info from the files and paste it back in the master file... and the part that i consider the trickiest, a way to loop it.
For example, lets say i have 2248 in cell A10, it should open Inventory_2248.xlsm copy the contents from cell N4, O4, P4, Q4, R4 and S4(Inventory File) into N10,R10,S10,T10 and U10 (Master file) respectively then in A11, there could be a 2250 so it should open the 2250 file get the info, paste it and so on.....
Now I don't even know if this is do-able or just impossible, been fiddling with various codes to no avail.
View 4 Replies
View Related
Dec 5, 2011
I'm using a code to search some information in a pivot table and copy the value in the cells with offset(0,1) and is very very slow, I tryed another method with the using of Find but isn't working: error message: missing object in the with cycle.
Here is the working code:
Dim DataFine, DataInizio, UltimaRiga, Gg As Date
Dim NomeMacchina, Plant As String
Dim Cl As Object
Dim Pr As String
Application.ScreenUpdating = False
[Code] .......
Here is the code who doesn't work
For i = 6 To 500
Giorno = Sheets("OEE03").Cells(i, 2)
With Sheets("01")
Pr = Range("A5:A500").Find(Giorno).Offset(0, 1).Value
Sheets("OEE03").Cells(i, 9).Value = Pr
End With
Next
if I use this code on a normal sheet it works but when I try to use it on a Pivot table fields give me always the error message.
View 5 Replies
View Related
Oct 29, 2008
My workbook contains several worksheets each recording the results of equipment tests - one sheet for each piece of equipment. Rather than open each worksheet to check the date of the last test, other 'overview' worksheets pick up and display the last test date from each equipment record using the formula =MAX('sheetref'!A15:A500). Is there a better formula to do this?
Some items of equipment are tested at more than one frequency, ie Monthly, Yearly, etc. Therefore, the entry on row 15 of an equipment record may be column A 28/10/08 column D 'M' and row 16 column A 29/10/08 column D 'Y'. The above formula will only display the last test date, irrespective of frequency. There is a seperate overview sheet for each test frequency therefore, I need to modify the formula so that the date it copies from the equipment record worksheet to the overview worksheet is the date of the last test for the specified frequency.
View 9 Replies
View Related
Jan 6, 2014
In cell L7 I have (80/60)/24 and formatted h:mm to get 1:20. In cell M11 I have 1:00 (h:mm). In cell M12 I have L7-M11 and get the result 0:19. Why I'm losing a minute and not getting the result 0:20?
View 5 Replies
View Related
Nov 14, 2008
I've got two columns:
A, B
abc, def
qwe, rty
asd, fgh
zxc, vbn
And I need to bring these together in one column so it looks like this
C
abcdef
qwerty
asdfgh
zxcvbn
View 2 Replies
View Related
Oct 20, 2008
I've got a function called countcolor (which I take no credit for) which counts a particular color in a range.
---------------------------------------------------------------------
Function CountColor(rColor As Range, rSumRange As Range)
Dim rCell As Range
Dim iCol As Integer
Dim vResult
iCol = rColor.Interior.ColorIndex
For Each rCell In rSumRange
If rCell.Interior.ColorIndex = iCol Then
vResult = vResult + 1
End If
Next rCell
CountColor = vResult
End Function
I have then set up a couple of macros which, when ran, fills a range of cells with a particular color. These colors are closely related but as you can see from the two macros below they ARE different. I'm finding my countcolor function is counting them twice though even though as you can see the color values are different.....
---------------------------------------------------------------------------
Sub pegcharged()
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
.Color = 25600...........................
View 9 Replies
View Related
Mar 31, 2009
I need to make an excel sheet with checkboxes (around 50) which each add a value to 1 cell when clicked.
If you click them again the value should be removed again from the cell.
So lets say I got cell A2 and I got checkbox 1 to 5. Checkbox 1 has value 1 checkbox 2 value 2 etc. up to 5.
So if I click Checkbox 1 and 4, cell A2 should display "5". If I check Checkbox 1 off it should display "4". Now I tried to do this but I really cannot get cell A2 to display "4" again (clicking Checkboxes again just adds another value).
I know why this is the case, I defined checking the checkbox as click, not as "check" but I have no idea how to do this correctly.
Little info:
I have little to no experience in VB but got some programming experience next to it. I am using Excel 2007 (forced to, work).
View 9 Replies
View Related
Jun 8, 2006
I have an application where by the user only sees userforms which then writes the data to the back end worksheets. So the Menu or front useform I have set at vbModeless, which also means that the user can now open up or use an already opened spreadsheet. I believe I am correct in saying you can't do this if the userform is modal. Anyway this is what the user wants, i.e to be able work on multiple spreadsheets, whilst my app is open. The problem is when they click on one of the other open spreadsheets and then click one of the buttons on my application, you get an error.
I believe is because I use code such as
frmMetrics.Show
Where I haven't specified the actual workbook, so excel doesn't know where to go to find the userform. So how do I specify the workbook, without constantly having to change the line, when version numbers changes ?
eg
Application.workbooks("Book1")
For the next revision the file may be called Book1.1
Application.workbooks("Book1.1")
View 2 Replies
View Related
