How Can I Copy And Add A Row With The Copied Information?
May 19, 2009I'm working on this sheet and i'd like to copy information from row "i,i", insert a new row below it and copy that information to the new empty row.
View 6 RepliesI'm working on this sheet and i'd like to copy information from row "i,i", insert a new row below it and copy that information to the new empty row.
View 6 Replieswith a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies View RelatedI want to copy a csv file into a excel, but not all values will be copy into the Excel. Watch out for my code:
Private Sub ImportiereCSVDatei()
Dim wbTarget As Workbook
Dim wbSource As Workbook
[Code]....
dh. Zeros and values after the Column "Stand_NACH" will not be represented in the excel but the header will allways displayed
I have a worksheet. In sheet3 The value of column L2 is the value of column M2 in sheet . Everytime I copy the new sheet, I have to re type the formula for this new sheet. Is there a way to give formual such that when I copy new worksheet the formula will come automatically as it always has to link from the M2 column of the previous sheet?
View 9 Replies View Relatedi have some columns which contain the IF function and so it returns me a value in each cell. Is there any way to copy only the values AND insert shift down the copied cells onto somehwere else?
View 3 Replies View RelatedI'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.
View 4 Replies View RelatedI'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
Have you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies View RelatedI am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket#
Description
Name
12345
Test 1
David
32145
Test 2
Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345
Test 1
David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
=IF(Week1!G38>Week1!G37,1,0)+IF(Week2!G185>Week2!G186,1,0)+IF(Week3!G111>Week3!G112,1,0)+IF(Week4!G111>Week4!G112,1,0)+IF(Week5!G111>Week5!G112,1,0)+IF(Week6!G186>Week6!G185,1,0)+IF(Week7!G186>Week7!G185,1,0)+IF(Week8!G75>Week8!G74,1,0)+IF(Week9!G112>Week9!G111,1,0)+IF(Week10!G223>Week10!G222,1,0)+IF(Week11!G38>Week11!G37,1,0)+IF(Week12!G222>Week12!G223,1,0)+IF(Week13!G111>Week13!G112,1,0)+IF(Week14!G149>Week14!G148,1,0)+IF(Week15!G112>Week15!G111,1,0)+IF(Week16!G75>Week16!G74,1,0)+IF(Week17!G111>Week17!G112,1,0)
Now all I want to do is copy this info from cell C8 to D8 but with the exception that I want to change the > to
As you can see this macro copies a worksheet from one workbook to a new one. It is 14 columns wide by just under 700 rows long. I am losing information out of cells all over the place.
ChDir "H:HOMETIMCEXCELCOUPON_COUNT6_JUN"
Workbooks.Open Filename:="H:HOMETIMCEXCELCOUPON_COUNT6_JUNJUN_2006" + ".xls"
Calculate
Sheets("MONTH_END").Select
Sheets("MONTH_END").Copy
Cells.Select
Selection.Copy
Range("A1").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False .........................
I have a workbook that has close to a hundred sheets in it (see attached). I need to know how to get all of the information onto one sheet in separate columns like this: EMPLOYEE NO| HIRE DATE| NAME| VAC AMOUNT|WEEKS|VAC DATES| # OF HOURS|AMOUNT|PPE
If you review the attachment you will see how the sheet is read from left to right, so I would need the have the information in that order.
search sheets by the name of cell , like name would be 17012-23-12-45 i need search by the first 5 letters 17012 , because sheet name 17012 , it would be for a lot of sheets so i need to do it automaticaly , and then that specific sheet has been found i need to copy table from there and some pictures in there
View 4 Replies View Related transfer data from several sheets to a master data sheet. The problem I am having now is there are couple blank cells. My code just ignore the blank cells on the master data sheet and paste next to the last cell with content. For example I attached a test excel. with my code. I want to leave the blank cell as it is to keep the same product in one row. below is my code.
VB:
Sub Copypaste()
'
' Macro8 Macro
For Each ws In Worksheets
[Code].....
I am a complete amature at Marco's and formulas. I have been trying to create what i need but i am unable to get it to work. I have a worksheet named "Course dates incl. pursuit" which has a table which runs from B7 to J144 in the table it has date, number, name, location, job, area, notifified, on system and passed?. in that order. I want if the passed column which is in J if that has a Y in it to copy and paste into another worksheet on the next avaliable line, worksheet name "Master."I would like it in a slightly different order if that is possible they have the same titles on the table but would like it to go number, name, location, job, area and date. Running from B5 to G(end of spreadsheet). That is the main part i would also like to to copy and paste into another worksheet if the answer is "N" but the above part is the most important part. Due to the computer settings i am unable to attach it
View 6 Replies View RelatedWhat I would like a macro to do is take information from cells A1 to P1 on sheet1 and add them to the table in sheet2 and then I can save the workbook. The information in A1 to P1 is taken from other cells around the workbook. Once the information is in sheet 2 I can delete or change the informtion in sheet 1 without it affecting the copied information in sheet 2.
The next time I open the workbook I can enter the information in cells A1 to P1 on sheet1 then run the macro again and will then take the information and add it to the bottom of the table in sheet2 underneath the previous information that had been added - obviously the source of this information will now be deleted.
I will need to do this again and again building up the table in sheet2. The table will also use columns A to P like in sheet1.
I want to insert some data in a number of cells (e.g. A1, B4, C4 and H8) on a worksheet ('Sheet 1').
I then want to press a button and have some code that:
Looks at column B on 'Sheet 2'
Finds the next empty row Copies and pastes the information from Sheet 1 into specific cells in that empty row.
In the attached file, I want to have the user select a receipt # and have it copy the information, for that receipt from the log, to the receipt tab. Then I want it to print the receipt. The macros that are in the file already, were created before I added a column for Receipt No., and don't ask for user input. File is attached.
View 3 Replies View RelatedI am trying to get information to copy from one userform combobox into a text box on another userform when pressing the command button,
View 5 Replies View RelatedIs there a way to copy the information in a Windows Explorer page into Excel?
For example, for any given folder or sub-folder in Explorer, I'd like to copy the NAMES of (i.e., not the file itself or the contents of the file) FILENAME, SIZE, TYPE, MODIFIED date, etc..
In the excel sheet bellow that I'm attaching you will see what I'm looking for.
View 8 Replies View RelatedI have created a code in which the information from Sheet 1 copies to Sheet 2 correctly. Every time I input new information for my click event (ticket sales/amount received/change due) I want this information to be displayed in Sheet 2. However, every time I start a new submission, the information overwrites on the second Row so that only one submission is displayed. I need to create a history of all submissions from Sheet 1. Here is the code that I have to copy Sheet 1 to Sheet 2:
VB:
intRow = intRow + 1
If intRow = 1 Then
intRow = intRow + 1
End If
[Code] .....
I have a customer data base going across each row about payments/address/DOB etc. When i go to alter some information in certain cells the rows become uneven and the information for customer B1 will be for C1 instead. I'm not familiar with excel but what i did notice when scrolling down i saw an outline of uneven rows.
View 1 Replies View RelatedI have excel from windows 8 and I am trying to copy the information on one cell on a sheet to multiple sheets. I tried the click on one tab hold shift and click on the last tab and type the information or press F2 or paste the information. Well, nothing works.
View 5 Replies View RelatedI have been able to produce a column that gives me key date information. I might have many empty cells in that column before it hits another date. I need to get this data over to another sheet and place it in a row.
I am trying to get it to look like this:
B2(value), C2(value),D2(blank),E2(Value),F2(Value),G2(blank) etc depending on how many more elements are found in the sheet.
I am able to find topics that allow me to copy a range of data but not one that will allow me to copy a range then skip a cell.
1. In whatever cell is selected when the macro is run, enter a new row.
2. Copy the information from the row directly above the new row and paste (values, formulas, formats, etc) into the new row.
3. Return to column P in the new row, i.e if the new row is row 11, then return to P11, for row 12 return to P12, etc.
I have tried recording the macro but because it is hard coded to specific rows, its not working. I have attached a sample copy of the sheet (had to zip due to the size of the file).
What I have is a master file that needs to pull info from other sources (a simple copy and paste)
those files are called Inventory_xxxx.xlsm . Inside the master file, there are cells with the number of the inventory.
What i need is a way to tell excel to check what number is in the cell, open the files with that number, get the info from the files and paste it back in the master file... and the part that i consider the trickiest, a way to loop it.
For example, lets say i have 2248 in cell A10, it should open Inventory_2248.xlsm copy the contents from cell N4, O4, P4, Q4, R4 and S4(Inventory File) into N10,R10,S10,T10 and U10 (Master file) respectively then in A11, there could be a 2250 so it should open the 2250 file get the info, paste it and so on.....
Now I don't even know if this is do-able or just impossible, been fiddling with various codes to no avail.
I'm using a code to search some information in a pivot table and copy the value in the cells with offset(0,1) and is very very slow, I tryed another method with the using of Find but isn't working: error message: missing object in the with cycle.
Here is the working code:
Dim DataFine, DataInizio, UltimaRiga, Gg As Date
Dim NomeMacchina, Plant As String
Dim Cl As Object
Dim Pr As String
Application.ScreenUpdating = False
[Code] .......
Here is the code who doesn't work
For i = 6 To 500
Giorno = Sheets("OEE03").Cells(i, 2)
With Sheets("01")
Pr = Range("A5:A500").Find(Giorno).Offset(0, 1).Value
Sheets("OEE03").Cells(i, 9).Value = Pr
End With
Next
if I use this code on a normal sheet it works but when I try to use it on a Pivot table fields give me always the error message.
My workbook contains several worksheets each recording the results of equipment tests - one sheet for each piece of equipment. Rather than open each worksheet to check the date of the last test, other 'overview' worksheets pick up and display the last test date from each equipment record using the formula =MAX('sheetref'!A15:A500). Is there a better formula to do this?
Some items of equipment are tested at more than one frequency, ie Monthly, Yearly, etc. Therefore, the entry on row 15 of an equipment record may be column A 28/10/08 column D 'M' and row 16 column A 29/10/08 column D 'Y'. The above formula will only display the last test date, irrespective of frequency. There is a seperate overview sheet for each test frequency therefore, I need to modify the formula so that the date it copies from the equipment record worksheet to the overview worksheet is the date of the last test for the specified frequency.