Copy Information Between Worksheets Based On Specific Column Entry
Oct 29, 2008
My workbook contains several worksheets each recording the results of equipment tests - one sheet for each piece of equipment. Rather than open each worksheet to check the date of the last test, other 'overview' worksheets pick up and display the last test date from each equipment record using the formula =MAX('sheetref'!A15:A500). Is there a better formula to do this?
Some items of equipment are tested at more than one frequency, ie Monthly, Yearly, etc. Therefore, the entry on row 15 of an equipment record may be column A 28/10/08 column D 'M' and row 16 column A 29/10/08 column D 'Y'. The above formula will only display the last test date, irrespective of frequency. There is a seperate overview sheet for each test frequency therefore, I need to modify the formula so that the date it copies from the equipment record worksheet to the overview worksheet is the date of the last test for the specified frequency.
View 9 Replies
ADVERTISEMENT
Jun 1, 2006
I have a workbook with many sheets, all of which derive information from the first sheet. On the first sheet, I enter values from say J1:J29. Each of these values is fed into one of the subsequent worksheets. I would like to have some code that would look at my range, determine which cells are used and print the corresponding worksheets. Write now I have a bunch of If statements that say
If Sheets("Worksheet").Range("j8") > 0 Then
Sheets("698-ALY W1222").PrintOut
End If
the problem is that it takes to long as each statement is evaluated and the print command sent.
The values in column J have names in column I and while the names do not exactly match the worksheets, a person could look at the name and match the correct sheet. For instance the name in column I that corresponds to the worksheet name 698-ALY W1222 is 698/ALY.
Thanks
Bryce
View 9 Replies
View Related
Apr 26, 2014
I have a customer data base going across each row about payments/address/DOB etc. When i go to alter some information in certain cells the rows become uneven and the information for customer B1 will be for C1 instead. I'm not familiar with excel but what i did notice when scrolling down i saw an outline of uneven rows.
View 1 Replies
View Related
May 20, 2008
I've searched for a solution on the board and the internet too but to no avail; I am trying to create a macro that will select the entire column based on a cell reference G1 which is infact a Date.
Column G to Column S are pre-defined with a specific Date in row 8. If the Date in one of these columns (G8 to S8) match with the Date in cell G1, say it finds a match with H8, then I want to copy the range F14:F2000 and paste as values in range H14:H2000. The possibility of a match found is limited to a single columns from G to S.
View 9 Replies
View Related
Jul 12, 2012
I have a workbook with 3 worksheets which contains a single spreadsheet where the user enters data and 2 worksheets containing all the named ranges and formulas(divided up by product model) used on the data entry worksheet. What I've been trying to accomplish is to choose one worksheet based on which product model I select on the data sheet.
View 1 Replies
View Related
Jan 27, 2014
Imagine I have 2 columns of information that look like this:
Column A
Column B
AS
Dog
AS
Cat
AS
Hamster
FT
Fish
These are my key columns. The letters are initials of people and the animals are the pets they're responsible for.
Now, I have 3 more columns that look like this:
Column D
Column E
Column F
These columns can go on for hundreds of rows.
What I want to do is pull out the information from columns D, E and F where the initials and pet match those in the key list, then paste that elsewhere (say to columns J, K and L).
So, for instance, the first entry would be copied across because, according to the key list, AS is responsible for a Dog, but the bottom entry for AS wouldn't because he was looking after a fish, and that pet isn't listed as one of his animals in the key list (Fish is listed alongside FT). Likewise, the entry for AH wouldn't come across because AH doesn't appear on the key list at all.
View 1 Replies
View Related
Jun 14, 2007
I have a spreadsheet that I am trying to use as the 'master'. I want to break down this master by category (Column D) and label the worksheet by category (AA, Code, SQL...)
I need for the code to search the D1:D500 column and find "AA", "Code" or "SQL" and place the entire respective row on each respective worksheet. Then sort by colmn E. There are columns a:h that need moved to each sheet.
View 3 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
Oct 18, 2013
I have a workbook with many sheets of similar but not identical data. I need to extract columns from each sheet based on 5 header criteria and paste them to a single sheet. Each worksheet contains these 5 criteria.
I've been working with the VBA script I've pasted below. It's grabbing the 5 column criteria that I have in sheet 12, and comparing them to sheet 1 in the workbook, then copying them to sheet 12. This much is good, but I need the script to also return the data from the other worksheets as well. I've tried modifying the script based on other loop functions in other scripts I've found, but I'm not having any luck.
View 14 Replies
View Related
Mar 1, 2014
I have found a list of newspaper in an excel file and at the end of the text it is written the name of the language e.g Bangladesh News 24 (Dhaka) [In Bangla], The Bangladesh Monitor [In English]. I would like to distinguish the names ended with [In Bangla] and in [In English]. How can i distinguish this two different type of data with VBA?
View 1 Replies
View Related
Jan 29, 2014
I have filled up my ComboBox1 with the sheets I want to add information to. My problem now is how to place the info in the correct sheet when I click CommandButton1.
I've been working on this for a few hours now. I got this to work on the first code I found but it didn't work afterward. I just deleted the whole thing and started again.
View 1 Replies
View Related
Dec 31, 2013
I have a spreadsheet using an Input Form (user cannot get to the spreadsheet to enter data - they must use the form). This is working well.
What I need to do now is allow the user to retrieve data that is already entered. Example: Spreadsheet has 100 unique records (rows). In each is ID, Name, State, Dues, and about 20 other columns of information.
I need to allow the user to key the ID # and then up pops all the other information for just the ID provided. I will also need the ability for them to then change that information if needed.
So if they key 13WIL they will get Wilson, TX, $50, etc. And then they can make changes to any field needing a change. Add a phone, change and address, etc.
View 3 Replies
View Related
Jun 3, 2009
I have a column 'AE' that contains the html code for ecommerce item descriptions. While importing/exporting back and forth with another program and my spreadsheet, the following was added all throughout the descriptions.
%0d%0a
In some places, it may be three or four times consecutively
%0d%0a%0d%0a%0d%0a%0d%0a
Is there a macro script I could run to simply remove this any time it occurs in this column? It is just showing up as text and I am sure in another program it was representing something other than text, probably a space or hard return. Regardless, I don't need it.
See example below: ....
View 8 Replies
View Related
May 22, 2014
I need a macro to move specific information.
I get an excel sheet with W/C Employer: (whatever) entered below the patient it belongs to in column E. This information needs to move into its own column (H) in line with the above patient information so I can use it in a mail merge to word.
The same thing needs to happen with WC injury date listed in column G. It moves to column I. Then delete the row it was moved from so I don't have an empty row.
Sheet 1 is what I get. Sheet 2 is what I need to end up with.
View 4 Replies
View Related
May 30, 2014
Check the attached sample file
a. actual data in columns is approx 150 items (that is why i need to hide/unhide columns)
b. there are about 120 persons whom above items are issued depending on expiry of life of item i.e. issue date plus number of months mentioned in row 3. for example if coat was issued to John on 5th Jan then it's life expires on 5th May and so on.
Now what i want
1. by clicking hide checkbox only that specific column should hide or if i click Hide All check box all column in range should hide.
2. as i enter issue date expiry of that item should automatically update on corresponding month sheet i.e for above example 5th May should automatically get entered in sheet May.
I have entered sample data manually in months sheet.
aJITCBP.xlsm
View 2 Replies
View Related
Feb 11, 2010
I have created a userform that allows input of information and then deposits the information on a specific sheet. I am looking for a way to have that information not only deposited on the specific sheet it is already set to but also to another sheet based on a selection made from a combo box.
here is my current
View 5 Replies
View Related
Jun 6, 2014
Any way to construct a formula in excel that will look at a reference in one column and find the latest date from the data in an adjacent column for that specific reference?
Below is an exctract from a much larger sheet of the columns in question.
The result in the last column should be 21/05/2014 for anything with D.O.001 in the second column and 15/05/2014 for anything with D.O.002.
Date Decision agreed
Disposal Order
Latest Decision date for D.O.
06/05/2014
D.O.001
[Code] ........
View 6 Replies
View Related
Jul 12, 2009
I am attempting in the code below to copy all the worksheets from a specific folder into an array (for later manipulation), not to a single worksheet, The files open correctly, but the reading of the worksheets into the array is my downfall....
Sub FindOpenFiles2()
Dim FSO As Scripting.FileSystemObject, folder As Scripting.folder, file As Scripting.file
Dim directory As String
Dim wksht As Worksheet, i As Long, wkshtnames() As Variant
Dim wbNew As Workbook
directory = "C:Users"
Set FSO = CreateObject("Scripting.FileSystemObject")
Set folder = FSO.GetFolder(directory)
For Each file In folder.Files
Workbooks.Open file
Next file
For Each wksht In ActiveWorkbook.Worksheets
i = 0
i = i + 1
ReDim Preserve wkshtnames(1 To i)
wkshtnames(i) = wksht.Name
Next wksht
View 9 Replies
View Related
Dec 23, 2011
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
View 9 Replies
View Related
Jun 11, 2014
I have a workbook with 25+ worksheets, all identical formats that each represent a different client. Each client is assigned a project team. I want to be able to sum up the worksheets by project team, but have flexiblity in doing so when I add new clients etc. So a couple of thoughts.
1. Is there a formula that I can create that compares the worksheet name to a list of names assigned to a particular client?
2. Can I reference a cell in each worksheet that identifies that sheet as a client that is to be included in the team summary?
Example of worksheet sequence
Worksheet - Summary Sheet - All Clients
Worksheet - Client 1 Team Alpha
Worksheet - Client 2 Team Beta
Worksheet - Client 3 Team Alpha
Worksheet - Client 4 Team Beta
Worksheet - Client 5 Team Alpha
Worksheet - Client 6 Team Beta
I want to create summary worksheets (identical to the individual client sheets) for each team.
View 1 Replies
View Related
Nov 10, 2008
i am trying to find a way to automatically copy information from a worksheet on my computer([list.xls]-List of accounts) to a worksheet on a shared folder([summary.xls]- accounts that have paid)
example:[list.xls]Sheet1!A:A has account numbers, C:C has account balance and D:D has notes on account.
If D:D is "paid", copy acc# to [\foldersummary.xls]Summary!A1, balance to B1 and notes to D1.
If D:D is "payment pending" do same as above but in row 2 and so on.
View 4 Replies
View Related
May 26, 2014
I want to run macro for copying specific cell values from worksheets according to their headers in one final worksheet of the same workbook. worksheets can go upto 30-31 ws as per the dates in the month. This would really save time and energy of copy paste.
Attached is the workbook : Datewise.xlsx
View 5 Replies
View Related
Apr 23, 2008
Am trying to put comments on column G based on information on column A. Column A contains a grade eg CDEF picked up from another sheet using vlookup. This grade is suppossed to be the same, but I have cases where I add a different grade say GHIJ to fill up my 99 required grades.Column G is for comments such as "Transfered" (which at the moment am entering manually)How can I use a formular so that each time I transfer from another grade other that the one intended it returns a comment "tranfered" on column G? Is it also possible to indicate the cell from which vlookup picked that grade on the same comment column G.
View 9 Replies
View Related
Feb 28, 2013
I have been able to produce a column that gives me key date information. I might have many empty cells in that column before it hits another date. I need to get this data over to another sheet and place it in a row.
I am trying to get it to look like this:
B2(value), C2(value),D2(blank),E2(Value),F2(Value),G2(blank) etc depending on how many more elements are found in the sheet.
I am able to find topics that allow me to copy a range of data but not one that will allow me to copy a range then skip a cell.
View 4 Replies
View Related
Mar 30, 2007
I have a spreadsheet where there are two columns for the user to enter data in, but they can only select one column. I want to lock the second cell if data is entered in the first. I can't find a way from validation to do this. Is there another way via VBA (stupid question, I know... VBA does everything but scratch your butt)
View 4 Replies
View Related
May 6, 2014
I have a workbook named as "DCR_Summary". In the sheet "FX", I want to get the sum of a specific column from two different workbooks named as "WNCR REPORT" and "DCCR-REPORT". The name of the column is "FXCOLL". The summation should start in row 7 all the way down where data is available. The good thing is that, my sum range will always starts at row 7 in both files but the bad thing is that the position of column "FXCOLL" is changing every day. The expected result is shown in the attached "DCR_Summary". It should pick at the same time the Sheet names where the summation came from. Sheet names is also changing and sometimes the FXCOLL is nil, hence, 0 value can be returned.
View 5 Replies
View Related
May 29, 2012
I am trying to write a procedure to highlight entire rows in VBA based on a entry in column A.
I have the below which works for say 1000 rows but breaksdown when I have 58,000 rows which is the usual amount of data I will have.
Below is the code I have so far. It appears when I debug it breaks on the red line with type mismatch.
Option Explicit
Sub RemoveBH()
Application.ScreenUpdating = False
Dim intcount As Long
For intcount = Cells(1, 1).CurrentRegion.Rows.Count To 1 Step -1
[code].....
View 7 Replies
View Related
Jun 3, 2006
Trying to write a formula that looks for the first number in the same row, then returns the value in that column in a different row. In the example included, cell A-7 should contain the formula. Within row 7, determine the column where the first number is listed (column D in this case), then return the value listed in row 3 of that column ('C' in this case).
I've tried Lookup, Index, and Match functions, but can't seem to get the right combination.
View 7 Replies
View Related
Jun 26, 2013
I have been attempting to cobble together code from different forums for the past several hours to make a macro to unhide a specific number of worksheets based on a cell value, and have failed miserably thus far. Here are the specifics of what I have going on:
Microsoft Excel 2010
Workbook Name: TASERR Model - 06-26-13.xlsm
In this workbook, I have a worksheet called "Input". In cell C21 of that worksheet, workbook users will fill in a number between 1 and 50 (I have the value for that cell limited to those numbers through data validation). Based on the value in that cell (C21), I want to make a macro to unhide that specific number of hidden worksheets. I have 50 hidden worksheets which are named "Route (1)", "Route (2)", "Route (3)", etc.. If the value in cell C21 is 7, I want the worksheets named "Route (1)", "Route (2)", "Route (3)", "Route (4)", "Route (5)", "Route (6)", and "Route (7)" to unhide. If the value in cell C21 is 3, I want the worksheets named "Route (1)", "Route (2)", and "Route (3)" to unhide. I'm sure y'all can see the functionality I'm going for at this point.
View 8 Replies
View Related
May 9, 2012
I am new to using Macros and have not had great progress building a macros to make my life easier.
What I am trying to do
-In my main database tab 'FW Telecom' Use column A ( a set of numbers) to create a new tab based on that number, with a 'FW' infront IE ( column A shows 11, i want the tab to read FW 11)
-I want to create one for every number in the column
-Then I would like to copy my 'Template' tab to each new tab.
-From there I would like to fill in the information in the new tabs from the main database tab 'FW telecom'
-Since they will all be copies of the original template, i figure i can just get it to pull from the first column A and then fill in the info.
Not too much in theory going on here, just take my database and move the pertinent information to a user friendly look which I set up in 'template'
View 6 Replies
View Related
