Macro: Copy Certain Cells From All Worksheets
Dec 18, 2006
I have been at this for days and i can't quite get it right.
I have multiple worksheets of clients all formatted the same.
I need a Macro/VBA that will take from Each sheet onto a master sheet the Name of the Client(Cell I1 from the sheet)
Under the name I need the text Authorization #: then the data(C3)
Under that I need the text Dates of Service Expiration: then the data (D5)
Then the text 90801 Balance: then the data from (C30)
Then the text 90806 Balance: then the data from (F30)
Then the text 90847 Balance: then the data from (I30)
Then the text 90853 Balance: then the data from (L30)
Then a couple Spaces then the same exact data from the next sheet...till all the work sheets are done.....
View 7 Replies
ADVERTISEMENT
Dec 18, 2006
I have been at this for days and i can't quite get it right.
I have multiple worksheets of clients all formatted the same.
I need a Macro/VBA that will take from Each sheet onto a master sheet the Name of the Client(Cell I1 from the sheet)
Under the name I need the text Authorization #: then the data(C3)
Under that I need the text Dates of Service Expiration: then the data (D5)
Then the text 90801 Balance: then the data from (C30)
Then the text 90806 Balance: then the data from (F30)
Then the text 90847 Balance: then the data from (I30)
Then the text 90853 Balance: then the data from (L30)
Then a couple Spaces then the same exact data from the next sheet...till all the work sheets are done.....is it possible?
Dave responded by suggesting the following:
Sub CopyFromAllSheetsButMaster()
Dim wSheet As Worksheet
Dim wsMaster As Worksheet
Set wsMaster = Worksheets("Master")
For Each wSheet In Worksheets
If UCase(wSheet.Name) <> "MASTER" Then
With wSheet
.Range("I1").Copy _
Destination:=wsMaster.Cells(Rows.Count, "A").End(xlUp)(2, 1)
'More Copy Method code here
End With
End If
Next wSheet
End Sub...
View 3 Replies
View Related
Oct 23, 2013
I have a workbook that contains worksheets. They are listed as follows:
Sheet 1ABCDEFG
In cells A1 - A49 I have text. What I would like to do is to have a macro that I can run that will basically copy and save new workbooks with sheets A - G copied over and have the new workbook saved with the file name that I have denoted in cells A1 - A49 on Sheet 1. Also, the macro would ask me where I want to save the new Workbooks.
For example, if this were Sheet 1, Column A then the cells below would be the saved name of the new workbooks and the new workbooks would have Sheets A - G in themRed
Blue
Purple
Black
White
Yellow
Orange
Green
Gray
Brown
One more piece of information, the file that is being copied and saved is large (~80MB). If there is a macro that would allow me to simply "save as' the workbook and the Saved Workbooks would be named using the data in Sheet 1, that would work as well in case copying, pasting, then saving may take more time
View 1 Replies
View Related
Jul 7, 2014
Let's say I have a workbook with 7 worksheets named, for example, "Instruction", "Begin", "Worksheet 1", "Worksheet 2", "Worksheet 3", "End", and "Data". (in that order)
What I want to do is run a macro to go to whatever worksheet that is in between "Begin" and "End" and copy, for example, cells $C$1:$D$10; then paste as formula into worksheet "Data" starting from cell C1 and then down a list (i.e., copied cells from "Worksheet 1" get pasted as formula into "Data" cells C1:D10; then copied cells from "Worksheet 2" get pasted as formula into "Data" cells C11:D20, and so on and so forth).
But if I were to add more worksheets (e.g., "Recipe" and "ToDo") positioned in between "Begin" and "End" and run the macro again, it'll either 1) re-copy all the formulas from the included worksheets back into "Data" including the formulas from the newly added/placed worksheets or 2) it'll add the formulas from the newly added/placed worksheets and paste into "Data" at the end of the list.
Can create the macro to run based on the position of worksheet, and not based on the name of worksheet, since ultimately there will probably be over 10 worksheets between "Begin" and "End".
View 4 Replies
View Related
Apr 14, 2013
I would like to copy several cells in a Summary sheet. I have 20 worksheets, corresponding to the information of 20 companies, with exactly the same format. They have obviously different data/figures.
I want to summarize some key figures into the summary sheet. I have already created the links manually and pasted all of them in a row for the first company. Now I would like to copy the same references from the other companies. Even if the cells are blocked with the dollar, excel will not go across the different worksheets to copy the same cells.
How can I do it? Certainly there is an easier way than to do 19* 70= 1330 clicks manually.
View 8 Replies
View Related
Nov 1, 2006
I have been given an assignment to copy the contents the contents from different sheets to one single sheet with following constraints. example: copy contents from say N sheets (same cell) to A sheet named XYZ to say A1,B1,C1..N respectively.
Sheet1(A9) to XYZ(B1)
Sheet2(A9) to XYZ(C1)
Sheet3(A9) to XYZ(D1)
Sheet4(A9) to XYZ(E1)
Sheet5(A9) to XYZ(F1)
Sheet1(A11) to XYZ(B2)
Sheet2(A11) to XYZ(C2)
Sheet3(A11) to XYZ(D2)
Sheet4(A11) to XYZ(E2)
Sheet5(A11) to XYZ(F2)
Sub X()
Dim lCnt As Long
' Upper bound and lower bound for no. of sheets
For lcount2 = 1 To 3
lcnt = lcnt +1
Sheets(lcount2).Activate
If Sheets(lcount2).Range("A9") = "Distinction" Then
Select Case (lCnt)
Case 1:.................
View 2 Replies
View Related
Aug 30, 2013
I am a novice in VBA. I want to copy a range of value from Sheet1 and paste 1st value in the range to Sheet2, 2nd value in Sheet3, 3rd value in Sheet4 and so on.
Ex
Sheet 1 has a value in cell
B1 : C02
B2: C03
B3: D01
B4: D03
B5: D04
and so on....
I want C02 to be pasted in Sheet 2, cell B1; C03 pasted in Sheet 3, cell B1; D01 pasted in Sheet 4, cell B1...and so on.
View 2 Replies
View Related
May 20, 2009
I'd like to copy/paste from different spreadsheets. The place it will be pasted is specific.
Sub Family1()
Range("A2").Value
Sheets("Black Market").Select
Range("C3:C35").Copy
Sheets("Profiles").Select
Range("B2").PasteSpecial
Sheets("Real Estate").Select
Range("E3:E30").Copy
Sheets("Profiles").PasteSpecial
End Sub
View 2 Replies
View Related
Jul 6, 2009
I need a macro to copy data to various worksheets, in sheet workings, header is row 5, i have list of a/c codes in Col A, i need the macro to do autofilter col a5, and do a custom filter that begins with the following criterias, i then need the macro to copy filtered data to various worksheets, each worksheet is in the order of criteria, so CITI will be copied to CITIBANK_INTERNATIONAL etc. Target range to copy data to various sheets is A7
Criteria
Array("CITI", "CHES", "EXIG.AMPS20", "EXIG.COGN20", "BNPP", "ATOH", "ABNA", "BBHA", "BBHT", _
"BONY", "CITA", "JPMT", "NTCT", "STATE")
Worksheets
Array("CITIBANK_INTERNATIONAL", "CHESS_ASSET_REC", "LIFE_EXIGO", "NOMINEE_EXIGO", "INTL", "MC_AIMS_to_HIPORT", _
"SMP_REC", "SMP_REC", "SMP_REC", "SMP_REC", "SMP_REC", "SMP_REC", "NORTHERN_TRUST", "NOMURA")
View 9 Replies
View Related
Sep 5, 2013
Copy Ranges From all Sheets.xlsx
I need a macro that will copy a range of cells, it is always in the B2:B7 range from all the worksheets in a workbook. This is just a sample of the actual workbook, which has 100's of worksheets. The macro also needs to maintain any formatting [conditional or regular].that has been added to a particular cell. The ranges need to be pasted in a worksheet named "content" and arranged in columnar sequence, please see attached sample.
View 3 Replies
View Related
Mar 31, 2014
I have a problem with attached workbook, I downloaded from this forum,its what I need but problem is that I don't know much about macro & vba.The formula works fine when I make a single letter worksheet but when I enter a name it doesn't.
View 2 Replies
View Related
Jun 19, 2014
I have the following code:
[Code] .....
I'm getting a Run tim error 438 object doesn't support this property or method for the If ws line. All i'm trying to do is copy the A column results starting at A5 from each worksheet listed into the active worksheet starting at A128. hiding any blank cells or cells with errors (I.e. #N/A) would be great as well.
View 4 Replies
View Related
Feb 6, 2009
I need a macro to copy data from "sheet1" "sheet2" "sheet3" / column E and F to the worksheet "final". The number of rows in "sheet1", "sheet2", "sheet3" etc. is variable.
View 5 Replies
View Related
Apr 16, 2014
how to copy data from two different tabs and then paste it into one? My below code opens up a workbook and extracts the appropriate data, but I also need it to extract data from another tab within the workbook that was opened.
Sub LTDexportDATA()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
[Code].....
View 1 Replies
View Related
May 27, 2008
Have a workbook with approximately 25 worksheets in it.
I want to copy/paste/value each worksheet and save it as it's own workbook.
My code doesn't work, it hangs up on ws.copy every single time, on Excel 2007 and prior versions.
Sub SaveWS()
Dim wb As Workbook
Dim ws As Worksheet
For Each ws In ThisWorkbook.Worksheets
ws.Copy
Set wb = ActiveWorkbook
wb.SaveAs "t:dir1expenses" & ws.Name & ".xls"
wb.Close False
Next ws
End Sub
View 9 Replies
View Related
Jul 13, 2006
I'm writing some macros in excel in an effort to transfer over from Lotus 1-2-3 but have hit a major roadbump. The macro is fairly complex and takes a while to run and I'm trying to cut down on the Run Time. As of right now lotus does it about 6x faster. I think a big roadblock here is that in the macro I built in excel when copying and pasting values into another worksheet, the coding has to
1)select the cell to copy
2)switch worksheets
3)select the cell to copy to
4)paste or paste special into that cell
5)switch back to first worksheet
Etc...
for every single value I want to copy over. With lotus it was possible to just copy values to an defined name in another worksheet without leaving the current one. This would greatly decrease runtimes and I was wondering if anyone knew how to code for this.
View 5 Replies
View Related
Jan 3, 2014
Setup: I have 2 worksheets with between 8 and 9,000 rows on each
Column A in both worksheets Sheet1 and Sheet2 have an email address in them.
Not all addresses in sheet1 will be on sheet2 and visa versa
Column J on Sheet 2 contains a date
What I need: Column M on Sheet1 is empty
I need a formula to place into Column M on Sheet1 that will
Look at Sheet1:A
Locate the corresponding value on Sheet2:A
Pull the date from Sheet2:J same row into Sheet1:M
View 2 Replies
View Related
Aug 11, 2007
I am developing a Workbook where I import data to one worksheet and then disseminate it to other worksheets. I am not sure if I am overthinking the process, but I am having difficulty writing the macro and getting it to run through the entire list of rows.
There are 4 Columns in the one worksheet, named "Update":
Column A supplies the name of the worksheet that will be updated
Columns B-D contain the data that will update the sheets.
The process that I am trying to write the macro for is a follows:
1. Select/copy the range, starting with B1:D1 on "Update"
2. Navigate to the appropriate worksheet to be update, determined by A1
3. Identify the first blank row, starting with A5
4. Paste the data B1:D1 to A5:C5 (or next available line)
5. Navigate back to "Update" and begin the process again with the next row B2:D2
This process should continue until there is no value in Column B on the "Update" worksheet.
View 7 Replies
View Related
Aug 11, 2009
I am having trouble creating a macro for an excel file I am working on. I do not have much experience writing macros, so I apologize for any confusion. I have created a simplified version of the file I am attempting to write a macro for and attached it to my post here.
At this point it would be helpful for you to open up the attached file so that you can understand my explanation.
Basically what I want the macro to do is:
1. Match up "Product" on Wksht(Input) with "Product" on Wksht(Data).
2. Copy the "Usage per ton" and "Dollars per ton" values corresponding to the given product from Wksht(Input) to Wksht(Data) for the correct month. (The user will manually enter the month, ie "August 09" into Wksht(Input) each month when he runs the macro.)
++The color fills will not exist on my finished macro. I only put them there to illustrate the values that will be copied and pasted.
I want the macro to be written with Loop commands so that it will check to be sure the product number matches with the given location for pasting the data values. I should also note I use PasteSpecial_Values because of the formulas in the cells on Wksht(Input).
View 12 Replies
View Related
Dec 23, 2011
My problem is as such; each month I receive an application for payment. This will contain around 20-30 worksheets. However I only need to interrogate around 3-4 specific ones. The worksheets I require contain data describing the plant/equipment a company has purchased, or materials purchased over a period of time. Each month the worksheets are updated with the previous months data appended to the bottom. I am required to established if the equipments have been purchased at the correct rate.
The worksheets are all protected thus in order to interrogate them I am required to copy an paste their contents into a new work book in order to format them and insert my new "assessment" columns. I need to keep the work sheets separate in the new work book as they have different layouts however they have the same layout and work sheet names each month.
I needs a macro which would allow me to open up a new book them copy the specific worksheets from a specific file into the new work book. I then have a separate macro which re-formats them into the layout I require.
View 9 Replies
View Related
Mar 9, 2012
Been a while since I've worked with macros within excel and I can't seem to get what I remember being a basic macro to work whatsoever. I have 2 worksheets containing a massive amount of data and need to pull some cells from one into the other when values in 2 columns match.
To better explain, sheet1 has ID numbers in column G spanning for roughly 1700 rows. Sheet 2 has corresponding ID numbers in column EO. The data I need to copy over is in columns EP and EQ on sheet 2.
So I'm trying to build a macro to compare the values in Sheet1_Column_G to those on Sheet2_Column_EO and when a match is found, copy the value in EO and the adjacent entries in columns EP & EQ over into columns X, Y, and Z on sheet 1.
Couldn't get a VB function together to save my life so I tried working with MATCH & INDEX and didn't get very far either. I've included my current function below.
=IF(ISNUMBER(MATCH(G1606,Data!$EO$527:$EO$601,0)),INDEX(Data!$EO$527:$EQ$601,MATCH(G1606,Data!$EO$527:$EO$601,0)),"Not Found")
View 7 Replies
View Related
Jul 3, 2013
I worked on a workbook which has multiple worksheets( mine has 6). The data doesn't start from A1. I want to copy the data from each worksheet into a sheet called summary. I want to create the macro that would only copy the heading row once.
WB test.xlsxWB test.xlsx
View 5 Replies
View Related
May 26, 2014
I want to run macro for copying specific cell values from worksheets according to their headers in one final worksheet of the same workbook. worksheets can go upto 30-31 ws as per the dates in the month. This would really save time and energy of copy paste.
Attached is the workbook : Datewise.xlsx
View 5 Replies
View Related
Aug 15, 2012
i need a macro which copy and paste from multiple worksheets (except for 3 worksheets which is named after Jan, Feb and Mar) into one worksheets (named as OVERALL). The data to copy will cover from cell A1:D1 and below where there is data available.
View 5 Replies
View Related
Aug 26, 2013
I need to copy all sheets from a workbook to a another workbook (create a copy of the one I am using) and this is the cod I have:
Sub NewReport()
Dim Workbook1 As Workbook
Dim Workbook2 As Workbook
With Application
.ScreenUpdating = False
.DisplayAlerts = False
.EnableEvents = False
End With
[code].....
The problem I have is that the output only have the sheet1!
I am using Excel 2010
View 4 Replies
View Related
Sep 14, 2008
I have one master worksheet named "Season" and 30 other worksheets named "1,2,3,4 and so on to 30". I ideally want to copy the shapes (msoShapeOval) from the worksheets- "1-30" to worksheet- "Season". When the shapes (msoShapeOval) are copied from worksheets "1-30"
I want them to keep thier position that they were in when copied to worksheet- "Season".
The shapes (msoShapeOval) are in range "A1:AZ43" in worksheets "1-30" and would be placed in worksheet "Season" range "A1:AZ43"
View 9 Replies
View Related
Sep 8, 2009
I have question on how to calculate the certain cells between 2 different worksheets based on the certain calculation parameters and the comparison result (the report) is put into the new worksheet on the same workbooks.
1) Worksheet1 contains: DEPTH, G1, C1, N1, D1, S1, SR1, MR1, DR1
2) Worksheet2 contains: DEPTH, G2, C2, N2, D2, S2, SR2, MR2, DR2
Expected result should be put in Worksheet3: DEPTH, G1, G2, calculation(G1 and G2), CI1, C2, calculation(C1 and C2), so on until the last columns. (find example on attached file "Test_Data.xls)
What I have done is to create a template to be filled in by copy and paste DEPTH, G1, G2 on worksheet1, DEPTH, C1, C2 on worksheet2, so on (attached file "Template_QC.xls"). Then I create a calculation macro for each of those worksheets separately to calculate the difference and color them . The calculation macro that I used is as follows:
View 5 Replies
View Related
Apr 4, 2014
I want the macro to:
1. Create a new worksheet when data is entered into a cell (ie. entered text "ACC2013" into cell A5)
2. Rename that worksheet to correspond to the data in the cell (ie. change worksheet name from sheet2 to "ACC2013")
3. Create a hyperlink between cell A5 and sheet2
I'd like for this macro to loop through a range of cells so I don't have to have a long code. Let's say my data range is from A5:A23. If this requires multiple macros that is fine.
View 1 Replies
View Related
May 22, 2007
I need a Macro that deletes all cells in column D of all worksheets in a book that are equal to the word "Timeout" and to shift the cells to the right of the "Timeout" cells into the deleted cells but leaving all other rows where the word "Timeout" is not present.
So in the case of Rows 2, 4, 6 and 8 containg the word "Timeout" in column D, I would like cells D2, D4, D6 and D8 deleted and the remaining cells shifted to the left but cells D1, D3, D5 and D7 left as they are.
Here is an example line of data:
16:02:30LEXKRunningprocedure:125sth
16:32:30LEXKRunningTimeoutprocedure:X125sth
17:20:54LSXPRunningprocedure:oxford
17:56:48LSXPRunningprocedure:xoxford
18:48:24LEXKRunningprocedure:125sth
19:18:24LEXKRunningTimeoutprocedure:X125sth
View 9 Replies
View Related
Apr 2, 2014
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
View 12 Replies
View Related
