I will admit I am a neophyte when it comes to VBA - I am JUST opening the book (never had to program before). I am trying to figure out how to create a VBA macro that will, with the click of the button, save the data in my worksheet (minus the header line) into a CSV file.
I can export the data I have into a CSV file the normal way, but I DONT want the header line included. And instead of manually removing it each time, Id like to just be able to export it, then send it to the DBA for integration.
I want to export some columns of my worksheet to a csv-file. But i don't want to export all of them, i just need for example: Columns B, D and G and inside the csv-file they should be in an different order like G, B, D .
I already thought about using "union" to select the specific columns, but i can't get this to work.
Is there a way to get an equation for a trend line and have excel automatically export the equation to a cell where it can be used. The only way i currently know how to do this is to manually type the equation.
I have a worksheet that I need to be able to easily copy and paste the formula/formatting from the row above, but not the Values entered, (if any). I am using columns A to DG.
I just really need to be able to copy all the formula in these cells down - nothing exciting or fancy.
I've tried formatting as a table as per some searches and that was difficult! My column headings changed, and when I inserted a row, two of the formula's wouldn't copy down - plus the shading and borders went wonky in places.
I am new to macros and I am trying to export 20 charts that are one worksheet. I found the code below online and it it does work for a majority of the charts. However, it randomly skips some of the charts and does not export the. I receive an Run Time error 76; Path not found. Each chart is named.
Sub Create_Png() Dim objCht As ChartObject Dim strPath As String strPath = "C:Path Name"
For Each objCht In ActiveSheet.ChartObjects objCht.Chart.Export strPath & objCht.Name & ".png", FilterName:="png" Next End Su
I would like to set up a macro to export this sheet as a CSV file to a directory called "temp" I have values in Col A:F and the maximum number of rows that will be used is 500
I have an excel with some ISBN10 in column1 what I would like to do is add a form control button that would do the following. Say for example column A has the following
1 ISBN10
2 1616550414
3 1926778456
4 1926778324
5 192677843X
The button should make a .txt file on Desktop/amazon file that should be like that Starting from A2
[URL] ........
ISBN may be 1 or more. 4 ISBN rows is just an example so the code should understand where the column rows cells finish. Also B column, C column etc has other values so it should only export column A.
I have some dates that I want to reformat. The file is an ascii text file, and I have imported this into excel. There are 7 and 8 character lengths
3122007 10122007
I want the dates to be all 8 characters (with a zero in front of the 7 character dates), and also I want to reverse the format, so it will read 20071203
I have a number of methods but nothing has worked yet.
After this I plan to export the file as a comma separated ascii txt file. I managed to import it, but I'm not sure how to export it.
I have a spreadsheet that currently looks like ........
My problem is that I want the macro to create either (a) a seperate text file for each line (1 for line 2, one for line 3 etc etc) or even better (b) create a file for the specific line i am on. For example if i happended to click on D5 and then pressed the macro key it would onyl create a txt file for line 5, same if i clicked on E6, it would only create a file for line 6.
I would be grateful if you could highlight the code you insert into my macro as it may be useful for other reports i run.
I'm going to attach a file I'm working with so you can see my issue direction but here is the background:
- file you see is an excel export from another software. This is as clean as it gets.
- what I am trying to accomplish is take the data for each person listed and movie it to it's own sheet via a macro. Creating the sheet name based on the name of the person. I've completed that task before with some help here, but never with data formatted like this.
- does anyone have any options they can think of? I've tried working with the two cells that make up the page number and basicly the move off that but can't seem to get that to work.
- would anyone suggest any formatting changes (while keeping all data integrity) before trying a move?
I'm trying to get my macro to paste the header row along with the data it's pulling. The code works without the ActiveSheet.Paste portion, but i want to be able to add that in somewhere. Here's the Sub DataCreate() Dim lstrw As Long, x As Long, y As Long, c As Range, fnd As String Dim nxtrw As Long, dest As Worksheet, ws As Integer, caddress As String Dim destwb As Workbook, srcwb As Workbook, src As Worksheet, src2 As Worksheet
Set srcwb = ActiveWorkbook Set src = srcwb.Sheets("CUSTOMER ID") 'Change sheet name ot fit the sheet that has your list of unique ids
Application.ScreenUpdating = False Application.Calculation = xlCalculationManual lstrw = src.Cells(Rows.Count, "a").End(xlUp).Row For x = lstrw To 2 Step -1 fnd = src.Cells(x, 1) Workbooks.Add.SaveAs fnd & ".xls" Set destwb = Workbooks(fnd & ".xls") Set dest = destwb.Sheets("sheet1") For ws = 1 To 1 Set src2 = srcwb.Sheets(ws) If WorksheetFunction.CountIf(src2.Range("b:b"), fnd) Then With src2 With .Range("b:b") Set c = .Find(what:=fnd, after:=.Cells(1, 1),
I've created a worksheet that allows my team to build an order for a customer. I've created a PDF form with blanks so they can fill in the necessary values in the correct fields ie. Tariff Name, Handset Name, Minutes etc.
I'm hoping to create a macro button that will export all the the data needed and auto fill the PDF form to save time.
So far I've added a button with the following code
VB: Sub CopyData() Sheets("Quote").Range("v16:ab16").Copy Sheets("Sheet1").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0).PasteSpecial Paste:=xlPasteValues End Sub
This simply adds all the data needed onto a separate sheet ready to be exported as a csv.
I'm in need of the rest of the code to export/import Sheet1 into my fillable form.
So far attempts to export to .csv have turned my entire worksheet into a .csv file or caused errors within the code.
I've attached a sample of my Workbook and PDF form below.
I have a macro that I run repeatedly in a certain type of spreadsheet that does an export on a selection, pulls up a "Save As" message box and saves as a text file. There are 9 sheets in the workbook that contain the same data analysis for a set of samples, the only difference between them being the number of data (e.g. some may have 1500, 1400, 1600, etc.). I only select three columns of data to export (I6:K????) that contain counts (1,2,3,....), x-coordinates and y-coordinates. The counts column (I) uses a formula that only counts if there is an x-coordinate next to it (Col J).
[Code].....
Generally, what I do to make quick work out of selecting the variable ranges is to select Sheets 03-11 (the first nine sheets) and select K6:I6 (starting w/ K6). Then, on each individual sheet, I do CTRL+SHIFT+DOWN to select all the relevant data (if I started my selection with I6, then it would select all cells that contained formulas which may or may not have x,y-coordinates adjacent to them). Once the data is selected (I6:K????), I run the export macro and save the data as text. I would like a macro that can automate the selection for each Sheet 03-11, excluding Sheets "all", "data" and "summary", and run the export macro, first prompting me for a file location and a file prefix. When the text file is saved, it uses the file prefix and Worksheet name to build the filename, i.e. "pathprefix_wkshtname".
I've attached an example workbook : 20120511_Au-cit_pH5_test.xlsx
A B C D E F G H I J K L M N O 1 ** ** *** ** ** ** ** *** ** *** ** ** *** ** ** 2 ** ** *** ** ** ** ** *** ** *** ** ** *** ** ** 3 ** ** *** ** ** ** ** *** ** *** ** ** *** ** ** 4 ** ** *** ** ** ** ** *** ** *** ** ** *** ** ** 5 ** ** *** ** ** ** ** *** ** *** ** ** *** ** **
I need a macro that can automatically export the cell data for each row from Column A--> O into it's own seperate text file, and name each text file with the text in column A. So again... everything in row 1 from A to O would be copied and pasted into a text file called (A1 cell data).txt
once that first text file has created, I was hoping that there could be a loop to automatically close the first text file and move on to row 2 and do the same, copy all text in row 2 from A to O into a new text file titled (A2 cell data).txt, close and move on to row 3 etc etc.
this is a large list of approximately 8,000 records.
I've got a basic handle on the application/use of macros, & personally use them for cleaning up data exported from a very very old as400esq application.
My problem is that i have managed to clean up all the blank data & piffle, but Im stupped by the header part of the text dump.
Heres an example; A B C D E F -------------------Header A------------- 1 3 john 50 piano 4 1 Bill 25 horn 6 5 Ted 60 trumpet -------------------Header B------------- 3 3 Phil 71 Cello 1 1 James 83 Viola 3 2 Earnie 62 Violin
I basically want to rid the header rows from the spreadsheet & drop the header description (Header A/ Header B) into column F for all those items below until you get to the next header.
I'm looking for a macro or VBA code that can copy the header/footer and apply them to other worksheets. I have found code to copy to all worksheets but I only want the next two worksheets to have the copied header/footer and not copy to all the worksheets.
I have 6 worksheets the first 3 are schedules, the only thing that will be changed in the header/footer will be work periods. example 12/20/09-01/20/10, all other info will be the same. Is there another way to change the dates without having to open each one and manually changing the date.
I want to write a macro code for header and footer in MSEXCEL so that when printing command is given, it prints the header and footer already given in macro. No one print should come without header & Footer already given in macro.I tried but not working properly.
Sub InsertHeaderFooter() ' inserts the same header/footer in all worksheets Dim ws As Worksheet
I've been using a VBA code to look through my spreadsheet and find any graphs in any tab and move it to powerpoint. I have about 70 tabs with 7 graphs each.
I have is that the order of the graphs in the slidepack isn't in the same as found on each excel tab.I also tried renaming them (chart1-chart7) but problem still remains.
How would a code look like to select a range with a column header on top. in the code you provided, it selected the entire W column. How would you select the range given that the W column was called Address?
I am trying to write a Macro that will identify a particular column by its field header (i.e. first row) and will run a specific set of code on that particular column.
My current code looks like this, coverting New York to NY:-
This code applies to 'New York' found in the entire sheet. I need to identify a column that is named 'State' and then make the code run ONLY on that column.
