I am doing a simple filter list copy and paste into another worksheet and I have a challenge trying to pass the value in Cell B1 (which contains the city) as a filter parameter in the filtered list.
I want to use the content of a specific cell in one worksheet to be used to form the filter criteria on a set of data in another worksheet, both sheets are in the same workbook
I have a spreadsheet. This has columns begining with A to S (with data in it)
It has rows beginning on row 5 and goes down to 85 but it gets bigger every day.
I want to create a macro with several phases
Phase 1 - Select the rows I specify, ie pop up box to decide on the rows Phase 2 - Filter down and select the rows in this selection where column K has a value (unselecting the rest) Phase 3 - Copying Columns A, B, D, E, F, K, from the selection Phase 4 - Pasting these columns into A, B, C, D, E, F, of the sheet the macro sits on....
I would like to use a dropdown box for all the names in my worksheet. Once a name is selected have all the rows filtered on that name and copied to a new workbook.
I think I'm making this harder then it is, but I'm just not comprehending what needs to be done.
Save advanced filter settings Remove filter (or simply set to be 'select all' Run other code (I have this piece of course) Put filter back on with same selections chosen as when it was removed
(Need this becuase the code in the middle does not work properly when the data is filtered)
Cell A1 needs to contain the contents of A3 without the user having to go and type the entry in each time the next cell along changes.
For example, let's say that last week 1.81 was typed in A2. The user then had to go in to A1 and also type 1.81. This week 1.83 has been entered in A3 so the user will manually have to go in to A1 and type 1.83. Next week when something is entered in A4, the contents of A1 will again need to match the contents of A4 and so on for the next 52 weeks. We'd like a formula in A1 that automatically shows the contents of the next cell along as soon as the content exceeds Zero.
I have a combo-box in Sheet Number 1 filled with date. In all my other sheets there a empty combo-boxes. When the workbook opens I automaticly want to copy the content from the combo-box from Sheet 1 into all the other comboboxes in the other sheets. Is there an way to solve this problem with a minimum amount of loops?
I have created formulas in cells BB2 through BM2 (1-12). I would like to copy the formula to B3 based on the content of A1 (A1 can only be a number from 1-12, representing months).
I want to copy cells content from the sheet1 column A to sheet2,I was tried by the function Sum but problem is some of cells which i tried copy have combination letters and numbers as content.
Maybe, specific things is because i wont copy cell A2 sheet1 to cell A2 sheet2.
I would like to paste a formula down a column but it should only paste if there is text in the cell to the right of the column where I am pasting (i.e dragging the formula down).
I'm using Excel 2007 and s/s is 325501 rows deep. It consists of series of ranges between 4 and 30 rows deep.
What I want to do is locate the next appearance of a name and copy its accompanying number. Doing this manully is not feasible, given the large size of the s/s .
I enclose a small attachment showing what I am trying to achieve. For those who don't like opening attachments the wording in it is :
The desired objective is to place in column Q the next appearing number in column L of the name in column C.
The VLOOKUP formula in column Q presents the desired number but (problem!) presents a zero when next appearance = blank.
When this happens I want the formula/code to repeatedly lookup the next appearance until it finds a number.
Examples of where next numbers appear are given here in column R.
I have a workbook, wich copies content from an overview sheet to different other sheets. that works fine, but if I try to hide the content-placeholder sheets, I can't copy my content anymore.
here the part where I get the error;
'OldValue contains the name of the "copy to" sheet as a string
I receive about 80-100 emails per week that are computer generated by one of our customers. It contains time entry data that needs to be processed for our internal system.
Today I copy paste the content (it is NOT an attachment!) to Excel and have a macro to decifer and organize the information.
Is there a way to automate the "copy-paste" process, that is, go to the inbox and process each email with a loop like method. The process needs to be able to go through a Yahoo mail box as well as an Outlook mailbox, Do not know at this time if there is a difference between the two.
I want to use a Login screen for a little "request-program" I made. Logging in works and when I log in as an administrator, an extra window pops up where I can add and remove new users (with pass). Users (column A) and passwords (column B) are located in a 'logins'-tab in my worksheet. Adding a new username works fine, but I don't seem to get the password next to the username. When adding a new name, the code searches for a blank cell in column A, adds the name and then sort the rows (so username and password still correspond). Usernames are filled out in a combobox (so you can select one to delete) and passwords in a textbox.
I have tried to these through formulas without success but i think i need VBA also which i am not very experienced.
I want to paste a list in the "InsertList" sheet. This list will only contain the word "Correct" or "False". From then on i need a way to search for the word "Correct" or "False" in the columnS P,Q,R,S,T,U,V.
e.g. If in the column "P" on the "InsertList" sheet the word "Correct" is found, i need that entire row from A to V to be copied onto it's destination, in this case "sheet1".
If the word "Correct" is found on the column "Q" on the "InsertList" sheet, the rows from A to V need to be copied in the Sheet2. And so on..
I have 11 worksheets in one workbook, the last worksheet is a total page.
I'd like to run a macro that copies the information from each sheet and pastes it into the total sheet. My range on every sheet begins at A2, but the end of the range is unknown.
All I have so far is trying to loop to a new empty cell on the total page (coded in a module - is that right?):
I have a list of 12.000 pictures which have to be "connected" with the article number (1000) & color (21). Here starts the problem... Each article usually has more than 2 colors, but is listed only once per row and the colors are stated in columns.
What I would need is a macro or function that would do from such structure:
art description color1 color2 color 3
1000 product A 21 22 23 1001 product B 19 23
this:
art. description picture
1000-21 product A, color 21 1000-21.jpg 1000-22 product A, color 21 1000-21.jpg 1000-23 product A, color 21 1000-21.jpg 1001-19 product B, color 21 1001-19.jpg 1001-23 product B, color 21 1001-19.jpg
1. check if the row in color columns is not null 2. if this is true, then I would like to copy the entire row & paste it below existing 3. then the "art." column would be changed (=A2&"-"&C2), so the article woul get suffix of the color (and column "picture" would be created, maybe something like =A2&".jpg") 4. if any other color column in the same row is greater than null, then proceed to next color & repeat steps 2. & 3., else go to next row 5. until all 5000 rows are converted in about 12.000 rows.
A single worksheet holds all the values I need to move to various worksheets in the destination workbook. The destination workbook is MASTER.XLS and is already open. The source workbook has various names.
I have the macro walking through each value in column E of the source worksheet. When a match occurs, the corresponding cell in column F has the destination worksheet name, the corresponding cell in column G has the destination cell address and column H has the destination value (string value).
I have dim statements for SheetName, CellAddr and CellVal ; all set for String. I have been playing with "Offset" as well as "Select"ing through the worksheet hierarchy to drive to the desired destination cell. All seem to be more work than necessary and none work properly.
What I am looking for is a set of macro statements that I can use as a "template" within the balance of the macro I have written. I would also happily accept recommendations about books that provide a step-by-step approach to learning the capabilities of Excel's VBA functions. I know from my limited programming background that there are many ways to do the same thing. I'd rather start with the most efficient rather than burn lots of hours experimenting.
I am using VBA to create a word document (.docx). This word document contains plain text content controls as well as picture content controls. I then use VBA to automatically select a picture based on the code below
Code: Set oCC = Word.ActiveDocument.SelectContentControlsByTitle("TabPic").Item(1) On Error GoTo TabErrorHandler oCC.Range.InlineShapes.AddPicture Filename:="X:XFERANDREW-TDCD " & LblVL &
[Code].....
After the document has been closed down I try to open it again and I am told "The file cannot be opened because there are problems with the contents."
When I click details it says "Unspecified error" and "Location: Part: /word/document.xml, Line: 2, Column: 0"
If I click ok it says "Word found unreadable content in "". Do you want to recover the contents of this document? If you turst the source of this document, click Yes.
Clicking Yes opens the document with all the contents and it is now renamed to Document 1. If I click no it does not open.
I use this to read cell content, add some text/characters (ie. [ and ]) and change the properties of the complete cell
Sub COMMENT() Worksheets("DVD Lijssie").Activate If ActiveCell.Value 0 Then ' Change all in to ... ... ... ActiveCell.FormulaR1C1 = ActiveCell.Value & " " & "]" & " " & "[" With ActiveCell.Font .Name = "Arial Narrow" .Size = 8 .ColorIndex = 16 End With End If End Sub HOW can I change this vba-code so it leave's the content of the cell like it is and add some content with the use of let's say TexBox1 and ONLY use different font properties for the newely added content?
I am attempting to use a cell reference generated using the "address" function and text function (so the cell displays text only, not formula) as a means of defining the top left cell into which I want to paste a column of formulas. The reference cell is static, but the contents is dynamic.
