I have 11 worksheets in one workbook, the last worksheet is a total page.
I'd like to run a macro that copies the information from each sheet and pastes it into the total sheet. My range on every sheet begins at A2, but the end of the range is unknown.
All I have so far is trying to loop to a new empty cell on the total page (coded in a module - is that right?):
I have written a code for reading the excel and capturing the content as an image but now i want to paste the captured content into another sheet of the same excel and want to add new column in the same captured image?
Is it possible to add a column in the captured image?
I have a workbook, wich copies content from an overview sheet to different other sheets. that works fine, but if I try to hide the content-placeholder sheets, I can't copy my content anymore.
here the part where I get the error;
'OldValue contains the name of the "copy to" sheet as a string
Sheets(OldValue).Select
I have tried to these through formulas without success but i think i need VBA also which i am not very experienced.
I want to paste a list in the "InsertList" sheet. This list will only contain the word "Correct" or "False". From then on i need a way to search for the word "Correct" or "False" in the columnS P,Q,R,S,T,U,V.
e.g. If in the column "P" on the "InsertList" sheet the word "Correct" is found, i need that entire row from A to V to be copied onto it's destination, in this case "sheet1".
If the word "Correct" is found on the column "Q" on the "InsertList" sheet, the rows from A to V need to be copied in the Sheet2. And so on..
sheet1.png
Attachment: dropbox.com/s/vgs4kzhoa1pip0a/CopyRows.xltm
I need to copy a couple cells from sheet2,3 and 4 to sheet1 depending on value of cell a2 of respective sheets.
I have the basic code here, and what I think I'm missing is the adding row in sheet1.
The below codes can be all wrong by the way, YES, I do not have much knowledge in Macro.
[Code] .....
I need to combine data from 4 tabs with employee names, onto a tab called total. The tab named total is hidden. Is there a way to do this using code?
In my sample I need the name then dates and data below in the yellow areas. As long as Column a has data above cell A22.
Currently have a sheet with column A/B. Column A has any of the following letters to represent Wins, Losses, Ties, Overtime Loss, Shootout Loss - W, L, T, OTL, SOL. Column B has team point totals after each result. So after the win in row one, the team has 2 points. After the losses in rows 2 and 3, the team still has 2 points. After win in row 4 the team has 4 points. After win in row 5 the team has 6 points. After tie in row 6 team has 7 points.
W
2
L
2
L
2
W
4
W
6
T
7
What is the best formula or is there a formula to easily calculate running total based on content from column A this for over 1700 rows?
Excel ( 2010 ). I am creating a Sales Leads spreadsheet. Within the spreadsheet I have a the following relevant fields.
proposed sales value field ( F2 ), Estimated Close - which will be Q1,Q2,Q3 or Q4 ( G2 ), % Probability ( H2 ) & Q1 ( I2 ), Q2 ( J2 ), Q3 ( K2 ) & Q4 ( L2 ).
F2 = 150
G2 = Q2
H2 = 10%
I want to calculate the actual value of sales based on %prob and put the total into the correct field ( I,J,K or L ) based on what field G2 says. So in this case 15 into field J2. I have attached an example.
I am working a project to move data from Rows 4:35 on a large number of worksheets (all in the same workbook) to Sheet 1 of the workbook by " looping through sheets". I need the data to be compiled. I am a novice at VBA, the code below was given to me (LoopthroughSheets) and the middle portion is a macro I recorded. I cannot get them to work together.
Sub LoopthroughSheets()
Dim ws As Worksheet
For Each ws In ActiveWorkbook.Worksheets
Rows("4:35").Select
Selection.Copy
Sheets("Sheet1").Select
Selection.Insert Shift:=xlDown
On Error Resume Next 'Will continue if an error results
ws. Range("A1") = ws.Name
Next ws
End Sub
This may not be the best way to do this, but I don't know Macros or Pivot Tables.
I am looking for a way with formulas to do the following:
Within a workbook the 1st sheet is the data entry.
In another sheet that will total data from the data sheet is where I want to be able to total columns of data, depending on what is entered in one specific column:
Example:
Data Sheet, E2:E2999 is a unit number selcted by pull down tab entry.
G2:G2999 in the same sheet is where the data is.
Q: What formula would allow to total the data on the Total Sheet depending on what unit number is selected in column E on the Data Sheet and the data amount in column D from Data Sheet?
I have developed a template with tabs for Jan thru Dec, and a Template tab that has the report. the VB code copies the file as a new workbook whenever the year changes, creating something linke 07_Reports.xls. It also copies the "Template" to each Jan-ded tab and adds descriptive info to indicate that it is Jan or Feb etc. There are several sheets, and each has 3 or 4 different reports across the columss. each report has a month by month summary at the top,and daily details for each month down below, with each month detail beginning at 100 row intervals and having a row for each day of the month. i use the month names at the top as hyperlinks to jump to that month's detail.
when the file is created the hyperlinks are not copied from the template tab to each Jan-dec tab. Is there a way to have the Template tab use some type of Relative Reference.
If not is there a way to loop through the Template sheet and identify the properties of all the hyperlinks that exist on the sheet. I have over 30 of these Report templates, one for each Water Well that is involed in this project.
so..
1 - can hyperlinks be relative so that they copy and setup on different worksheets when copied.
2 - if not is there a way to read thru the rows/columns of the worksheet and identify which cells in the template have a hyperlink, get the properties of it, and have vb code create that in the crated tab worksheets.
I want to copy all rows that have a value in say colum B from differenct worksheets to a summary sheet, it should stop when there is no data in colum B and then go to the next sheet.
The macro that I use to copy the date from sheets to a summary sheet:
-------------------------------------------------------------------------------------------
VB:
Sub extractCells()
Dim ws As Worksheet
i = 0
For Each sh In ActiveWorkbook.Worksheets
If sh.Name <> "Summary" Then
sh.Range("C3").Copy
[Code]....
I have built a sheet - sheet1 like this: It has 2 columns, header (line 1,9,19 etc...)and blank line (line 8,18,27 etc...) between groups. Groups are derived in the first column - Name.
What I'm trying to do is loop to take each group and copy it to a new sheet. Also it is necessary that the name of the new sheet will be derived from column A (A,B,C etc...).
NamePrice
A1,054,999
A1,132,500
A1,140,000[code].....
I have searched for my answer but because I am new to all this I am stuggling to manipulate some of the other code that is close to what I am after..
I am trying to find a quick way of summarising data from multiple detail sheets onto a summary sheet (all within the same workbook) with the number of worksheets varying (ie: I may add or delete worksheets).
I basically want a concise summary of the other detailed sheets.
My Workbook is setup as follows:
Multiple sheets detailing each individual trade (with a summary at the bottom with the basic info I need on the summary sheet).
A summary sheet totalling the profit/ loss from all trades, costs of all trades etc (I am ok with this).
A summary sheet summarising all trades - ie each of the summaries contained on the individual trade sheets consolidated onto one sheet for quick reference:
Trade #TradePositionProfit LossHold Time
1JBHLong300030
2JBHLong250020
3JBHLong200010
1WOWShort050012
1HVNLong800015
1CLXShort500045
2CLXShort250030
3CLXShort150010
What I am struggling to get onto the summary sheet is all the individual summaries on the detail sheets. The reason for this is that each trade can have up to 3 positions: the Initial trade, Pyramid 1 & Pyramid 2. (This range is in the same location of each sheet but could be 1, 2 or 3 lines) and the number of trades I enter during the month can vary (ie the worksheet number can vary).
I don’t want to have to manually update a range, of a consolidation for example, each time I add a new trade (new worksheet) & want to view a summary.
I thought it would be easier to summaries each trade at the bottom of each trade sheet so I can pick the information up from the same spot already in the format I want it in for the summary page.
Does anyone have any suggestions on how I can get the summary to search each sheet, no matter if there is 1 trade or 50 trades & pull the summary information which is located in the same spot onto the one sheet for a quick view?
I have attempted to use a table of contents macro and then Hlookups to pull corresponding data from each worksheet, but haven't had success
Issue: Excel workbook contains 50+ worksheets formatted the same, with data located in the same cells. Worksheets are constantly added to the workbook so the formula needs to scan the entire workbook
How the data is organized: Subject headings are as follows: Cell A1 is "Loan ID"; A2 is labeled "Deal Name"; A3 is "Property Name"; A6 is "Loan Amount"; and E4 is "Asset Manager". Cells B1,B2, B3, B6, and F4 contain the corresponding data.
Goal: I would like to automatically pull all of this information onto a summary page (much like a table of contents, but with the subject headings running across the top of the page) and the text data running down the page. I would also like to be able to click on the property name and have it direct me to the corresponding tab<br> <br>
I have attached an example of what I am looking for, see "summary" tab for end result and other tabs as make-up of the data.
I have an excel workbook containing 123 worksheets. Sheet1 I have titled "Summary" and I wish to copy data from the remaining sheets (2-123) into it. Each sheet is formatted in the same way, and I wish to take the data in cells E66:G130 from each worksheet and paste it into the Summary sheet (so, Sheet2's 3 columns would be pasted in cell A1, Sheet3's in D1, and so on).
I gave a couple of codes a go (this one is from a thread "Copy Data From Multiple Worksheets & Append To Single Worksheet", I tried to alter accordingly):
Sub SummurizeSheets()
Dim ws As Worksheet
Application. Screenupdating = False
Sheets("Summary").Activate
For Each ws In Worksheets
If ws. Name <> "Summary" Then
ws.Range("E66:G130").Copy
ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)
End If
Next ws
End Sub
However, I don't understand what "ActiveSheet.Paste Range("A65536").End(xlUp).Offset(1, 0)" refers to - I am told there is an error with this line ("compile error expected =").
I also tried the Consolidate function, but had problems as well.
i have one main sheet, and two resource sheets. In main sheet i have resource and project Matrix and in top of the cell i can select the week number. in other sheets, i have week and project matrix for resource. Now what i want is if I enter some details in main sheet, those values should be automatically posted to Resource sheets.
View 2 Replies View RelatedI have a workbook. This workbook is divided into 4 worksheets. I want to add some of the calculations I made on other worksheets onto 1. I looked for the formula on how to do this, and this is the formula that was given:
=Sheet1!A1
I found the formula here: [URL] ........
Does it matter that the cell I'm trying to link from, in this case A1 on Sheet 1, is the result of a formula--a simple addition--and not a number, like 1?
I have a workbook with 2 worksheets. I know I can link 2 cells between worksheets, therefore if I change the contents in Cell A1 in Sheet 1, it will then show the updated value in Sheet 2 where I have entered that I want the value in Cell Sheet 2:Z1 is the same value as "Sheet 1! A1"
Is there any way to do this same process for an entire row? I would like to ensure that any change I make to a Row in Sheet 1, is automatically reflected in Sheet 2. I was hoping I could link the entire Row between the worksheets, not just the cells, which is more tedious.
The contents for each cell in the row varies: Text, Hyperlinks, etc.
I need to sort out the data. I have in one worksheet data arranged as
A1 B1 C1
1
2
3
4
5
6
7
8
.
.
.
In second worksheet it is arranged as
A1 B1 C1
2
3
5
8
12
15
.
.
.
I want to merge the content from first worksheet into the matching and correponding column no of second worksheet
I'm trying to create a database which can analyze data for my thesis.
The idea is the following:
I have all data saved on multiple work sheets in one workbook.
I would like to use the find function and when I search for specific data this is either summarized in a new sheet or else can be printed.
I have over 200 worksheets - separate participants data. On each sheet there is a summary column of data at the moment. I now want those columns of data copied to a summary sheet but transposed to rows.
I have attached an example with 3 worksheets and the sort of summary sheet I am after.
I have one sheet for each day of the month with a table that has Employee Name, Reason, and Expected Return. I need to copy each line into the monthly sheet, but each day may have varying number of rows. Needless to say I would like to do this without copying lots of blank lines into my consolidated sheet.
View 10 Replies View RelatedI have standardized each existing worksheets and any new worksheet to have certain parameters. The purpose of the Macro requested is ensure these worksheets are sorted alphabetically (and only these worksheets). The code I have been working with is contained below. It is working as expected but now I need to incorporate a statement which places the following condition:
Sort worksheets only if A3 has cell value of eCRF NameIgnore worksheet name: TOC & ENTER ECRF NAME
VB:
Sub Sort_Tabs()
'declare our variables
Dim i, j As Integer
[Code].....
I have a Main worksheet, 5 Operational worksheets and 1 worksheet containing data tables.
I want to in the Main Worksheet count, as a total, the number of times a word eg "Aviation" appears in the same range for each of the 5 Operational worksheets. For example,
=countif!'Aviation','team1',a6:a50,'team2',a6:a50,'team3,a6:a50,'team4',a6:a50,'team5',a6:a50
I have an excel workbook which requires us to enter the log details of some sites and then a report is generated using these logs (report attached) . [URL] .......
I want that excel should automatically identify the site and calculate its outage with the following formula:
Outage %age= Total Outage(min)/100.80
and add it in the respective column while identifying the outage.
e.g. if outage is of power then the calculated %age outage should be pasted in the power outage column in front of the respected site.
e.g. in the sheet attached above the first row in the first sheet states that SKU2326 was down for 50 mins
Now %age outage will be
Outage %age= 50/100.80
Outage %age=0.496
Now as the outage is related to power so this outage should go into power column in sheet number 3 labelled as "Network Total Up time Week#17"
Now the next time SKU2326 becomes down it should be added with this 50 mins and the outage calculated as presented above.
Cell A1 needs to contain the contents of A3 without the user having to go and type the entry in each time the next cell along changes.
For example, let's say that last week 1.81 was typed in A2. The user then had to go in to A1 and also type 1.81. This week 1.83 has been entered in A3 so the user will manually have to go in to A1 and type 1.83. Next week when something is entered in A4, the contents of A1 will again need to match the contents of A4 and so on for the next 52 weeks. We'd like a formula in A1 that automatically shows the contents of the next cell along as soon as the content exceeds Zero.
A1 A2 A3 A4 etc
1.81 1.81 1.83 0.00
Copy the contents of a text file from a webpage?
For instance, from this page I only want the data in the text box, which can be selected by clicking the Highlight All button.
I've seen code to copy an entire page, but this does not capture the text box contents in this case.
I have a combo-box in Sheet Number 1 filled with date. In all my other sheets there a empty combo-boxes. When the workbook opens I automaticly want to copy the content from the combo-box from Sheet 1 into all the other comboboxes in the other sheets. Is there an way to solve this problem with a minimum amount of loops?
View 2 Replies View RelatedI am trying to find the total rows in multiple worksheets and to copy the row count to a summary sheet.
For Each ws In Workbooks("HR.xls").Worksheets
With ws
If ws.Name "Summary" Then
If ws.Name "Pivot" Then