Macro Loop With Match Function
Apr 1, 2009
I tried to create a macro that compares two columns using a match function. The macro adds the macro function to the first cell and I double clicked the bottom right of the cell to have the formula auto fill down the column.
I noticed that the macro records the exact number of rows when you perform the auto fill or fill series. Now if I add another couple rows to the sheet, the step to auto fill all the cells in the column it stops before the bottom of the column.
I have been searching for a way to make sure the formula is placed in all the cells. I have been learning about loops but am having a problem building it.
View 9 Replies
ADVERTISEMENT
Aug 9, 2006
I am having a problem with a custom funciton I am trying to create. It will exit after it is finished with the IF Then Else statement. I need it to continue onto the Do loop at the bottom that does all the work.
Function UPCECheck( num As String) As Long
Dim CheckNum As Long
Dim TempCheck As Long
Dim X As Long
Dim Holdtxt As Variant
UPCECheck = 0
CheckNum = 0
Debug.Print Len(num)
If Len(num) = 12 Then
Holdtxt = num
ElseIf Len(num) < 12 Then
Holdtxt = "000000000000" & num
Holdtxt = Val(Mid(Holdtxt, Len(holdtext) - 12, 12))
End If...................
View 6 Replies
View Related
Nov 15, 2006
its says unable to get the match property
Me.doj.Value = Application.WorksheetFunction.index("A4:H574", Application.WorksheetFunction.Match("A4:A574", Me.id.Value, 0), 6)
View 4 Replies
View Related
Nov 24, 2013
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
Below is the data.
10010
10011
10011
[Code] ....
View 6 Replies
View Related
May 7, 2012
I am using a macro to pull and arrange data from two worksheets into a "master" sheet. After I run the macro, I have a large set of data but no way to see which sheet each entry came from.
I would like to have a MATCH formula run in a column to the left of the data. Column A will indicate if the data line is present in the sheet A, and Column B will indicate if the data line is present in sheet B. In the past, I have used something like the following:
=IF(ISERROR(MATCH([cell],[sheet]![range],0)),"NO","YES")
Things in brackets would be replaced with the relevant cell, sheet, and range being referenced. This line says "NO" if the cell string is not in the referenced range and "YES" if it is.
How would I insert this into the macro to have this run on every row with information in it?
View 7 Replies
View Related
Mar 11, 2014
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
=SUM(VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("FAID",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("BPCM",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE),VLOOKUP(F13,'[PIVOT 156.xlsx]PIVOT'!$C:$AQ,MATCH("COMD",'[PIVOT 156.xlsx]PIVOT'!$C$6:$AQ$6,0),FALSE))
Where:
F13 = Employee number
Column C on the pivot 156 workbook is where the employee number is based.
The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
View 2 Replies
View Related
Oct 8, 2009
I am trying to match data from 2 independent sets, formatted slightly differently so not sure which function would work best for me. From the attached file, I am trying to match the date and time stamp (in cell A1) with that from the other data (in this example in cell E1) and return the data (from cell F1) to cell C1. So basically any date and time stamp before 04/03/09 04:00 will return a value of 44 (this value should appear, therefore in cells C1 - C30)
View 2 Replies
View Related
Aug 28, 2012
Basically where the columns say 2011 or 2012 AND 1, 2, 3. I want to be able to have it index the number below based on the GL number on the left and both the year and period on the top. I think that you can do with using the sumproduct function with the binary, but the computer is a little dated and it takes a while to run those calculations.
2011
2011
2011
2012
2012
2012
[code].....
View 5 Replies
View Related
Mar 20, 2009
Another interesting dilemma to solve. Using this formula:
View 2 Replies
View Related
Dec 3, 2013
let me start by saying that I know an example workbook would be useful here, but the part I'm struggling with is the [managementroster.xlsm] file, and there is A. no way I can release it to the internets and B. its so huge/complicated I couldn't even begin to reproduce a portion of it, scrubbed of data, and hope to maintain its functionality in a meaningful manner.
[Code]....
This formula checks a staff number on this spreadsheet, and then goes and looks at the staff number on the roster. Once found, it returns that staff members roster, but changes any manager codes in the MRC list to Mgr, and changes all other roster codes to Free.
I now need this formula, before altering roster codes to Mgr or Free, to only return codes that are a match for another table (or after really. I don't particularly care, so long as only codes are shown that match data from another table). I think an index/match function would do the trick, but this forumula is already at the edge of my excel ability, nesting another function within it is completey beyond me. The relevant cells for the index/match function would be:
This first Match function targets the column. $E3 is the date required, $BA$1:$DN$1 is the range the dates are entered in
Match: Lookup value = $E3
Lookup array = '[ManagementRoster.xlsm]Vacancies!'$BA$1:$DN$1
match type = 0
This second Match function targets the row. $A$4 is the department name, $B$434:$B$452 is the range where all departments are entered
Match: Lookup value = $A$4
Lookup Array = '[ManagementRoster.xlsm]Vacancies!'$B$434:$B$452
match type = 0
Index: array = $BA$434:$DN$452
So I think my final function is
[Code] .....
But I have absolutely NO idea where it would fit within my first formula, or how to code it so that my original formula only reproduces results that are found in both sheets, or anything.
View 2 Replies
View Related
Jun 18, 2014
I have come across one of those annoying 'out-of-memory' errors. See my code below:
Code:
'Dimensions (first rows and cols)
Const frow3 As Integer = 17
Const frow4 As Integer = 19
Const fcol3 As Integer = 10
Const fcol4 As Integer = 11
Sub Extract()
Dim ws As Worksheet, target As Worksheet, meta As Worksheet
[Code] .......
The code executes fine until it gets to End Sub. Some object eats up memory but I don't understand which one.
View 6 Replies
View Related
Dec 9, 2011
I am using a For Each statement to loop through a range to look for the match to a predefined variable. I have that part successfully set up.
But - I was it to STOP looping once it finds the first match.
Can I do this with a For Each statement? If so, how? if not, how to loop until a match is found?
View 2 Replies
View Related
Aug 14, 2014
I'm looking to use a do until/loop code to find a cell that equals a named range ("Clause") that is located on another worksheet, the code I have so far is:
[Code] ......
I've used something similar before and works, but I just cant get it to work. The values that I need to find the match to the ("Clause") cell are directly below the original activecell.
View 6 Replies
View Related
Oct 26, 2006
I found a use for the “Looping Through Workbooks” code (recommended by Dave in my last thread - thanks Dave).
I have a number of small files in "C:Files" that I’d like to loop through and find a match with data from a Master (in another folder) workbook as follows.
1. Match columns ”C” of each of the files with column ”H” of the Master.
2. For each matching cells, insert data from column “I” of the Master (“ Date” field) to into col “D” for each row of the individual files (about 300 rows)
3. Save & Close the workbook and loop to the next one in that folder
All that's needed here is code to search, match & paste, to insert into Dave's "Looping Through Files" code.
View 9 Replies
View Related
Jun 27, 2013
compare two lists of data in order to identify the possible matches considering date&time and the location stored in different columns as shown in the example file attached. The range of date and time for the comparison is one hour, but it can be changed...
View 4 Replies
View Related
May 25, 2012
Using online examples I am usually capable to reconstruct whatever I need. However, it's the combination of things I need to do now, which has left me banging my head on the keyboard for days now
Here's the data I am working with:
Sheet 1:
Sheet 2:
And here's what I need to get done:
From sheet 1, select first ID entry from Column A.Find matching ID in Column A of sheet 2On match, find in Column B the earliest date belonging to the concerned IDCopy that earliest date next to the corressponding ID in Column B back on sheet 1Return to step 1 and repeat for next ID entry. Do until end of list (sheet1)
So the result should look as following on sheet 1:
The major issue I am having is the combination of step 3 and 5. Because it probably means something like moving through an array that's within an array through which one is moving. And I am just missing that bit of experience that allows me to make that thinking step. I just keep falling off if you know what I mean...
View 3 Replies
View Related
Jun 30, 2014
I am attempting to loop this function until it finds the next empty row in column C.
Private Sub Workbook_Open()
Range("C2").Select
ActiveCell.FormulaR1C1 = "=IF(RC[-1]="""","""",RC[-1]+30)"
Range("C3").Select
End Sub
I have a feeling this is an extremely basic and easy task and I am perhaps, overthinking the code?
View 3 Replies
View Related
Jul 16, 2009
I am trying to "reverse the scoring" in a selected row of data. that is if the respondent selected 1 (on a scale of 1-4) I would like it to be replaced with 4.
I have done up this code (which might be pretty messy) but I always end up with Compile error: Loop without do.
Sub ExecuteConversionP2()
'Checks to see if the macro has already been run
Sheets("Sheet name").Cells(72, 3) = Sheets("Sheet name").Cells(72, 3) + 1
If Sheets("Sheet name").Cells(72, 3) > 1 Then
Exit Sub
'if it has already been run the cell C72 will have a number in it and it will exit
Else
Sheets("Sheet name").Select
'This is where I want the loop to start
Range("D76").Select
Do While ActiveCell.Value ""...........
View 9 Replies
View Related
Sep 21, 2013
I have a WB with multiple sheets. I have a Feed sheet that automatically pulls data from the web. I have a Scores sheet that currently has all head to head matchups each week for an entire season. So I want to check the cells on the Feed! sheet to find a partial match and if partial match exists then copy cell that contents score from feed sheet to the score sheet next to the appropriate teams name. Currently I have to manually enter all scores each week for the rest of my WB to update.
I need to look at Cell A3 (on the Feed sheet) which has "New York Jets" then search for a partial/similar match on the score Sheet (which is NY JETS, in this case). NY JETS could be in column B (rangeB2:B257) OR column D (rangeD2:D257) BUT I need to search by row, not column, then once a match is found check the cell to the immediate right and only if the cell is blank copy data from the (!feed) sheet to that blank cell on the (!scores) sheet
This is what happens if working right =
look at cell A3 on the (!feed) sheet = "New York Jets" then search (!scores) sheet Column B and Column D by row for a partial match, finds "NY JETS" as match in cell D8, if cell E8 is blank then copies cell H3 from (!feed) sheet, and pastes to cell E8 on the (!scores) sheet, if cell is not blank continues search until 1st blank cell to the right of matching cell is found (as there will be mutiple matching cells with blank cells to the right but I am only interested in the 1st blank cell found, once found and data copied the process is done and then starts over with cell A4)
Look at cell A4 (!feed)= "New England Patriots" then search (!scores) sheet Column B and Column D by row, finds "NEW ENGLAND" as match in cell B8, if cell C8 is blank then copies cell H4 (!feed) sheet, and paste to cell C8 (!scores)
Once this is done it moves on to the next cell in the next row on the (!feed) sheet, A5, to find a partial match for the data in that cell. I need to continue the search for each cell A3 to A74, and if no match is found to move on to the next cell A6... (based on the way the data is pulled in from the web there are some blank cells as well as some cells that say Game Final, this data won't be on the scores sheets in column B or D).
View 1 Replies
View Related
Jan 18, 2008
I am trying to do is loop through a series of directories under a target directory. When a directory is found, it looks within that directory and finds any .xls files, loops through those and copies/pastes them to the new target directory. I have managed to get it to work only on the first iteration of the loop through the directories, then it crashes. The error code is "Invalid Procedure Call or Argument." Here's the
If valFilePath = True Then
MsgBox (msg)
Else
'Search for directories within source directory
strDir = Dir(ebsSource & "", vbDirectory)
'If a file has been found
Do While strDir <> ""
If strDir <> "." And strDir <> ".." Then
strFile = Dir(ebsSource & "" & strDir & "" & "*.xls")
Do While strFile <> ""
'Copy .xls files and paste in destination
copySource = ebsSource & "" & strDir & "" & strFile
copyDestination = ebsDestination & "" & strDir & "" & strFile
FileCopy copySource, copyDestination
strFile = Dir
Loop
End If
'Crashes here after looping through the first iteration of Excel files
strDir = Dir
Loop
View 2 Replies
View Related
Apr 17, 2009
I want to use the function VLOOKUP at my VBA program inside a FOR Loop
View 3 Replies
View Related
Sep 20, 2007
I'm currently working on a program in which some sort of recursive looping seems logical.
The relevant part of the code I've currently written looks like this:
Sub hello()
Dim Max_stream As Integer
Dim j, jj As Integer
Dim P_sum, P_min As Double
Dim antal_in, antal_ut, rad_in, rad_ut, ut1, ut2 As Integer
Application. ScreenUpdating = False
Max_stream = WorksheetFunction.Max(Worksheets("Data"). Range("B65536").End(xlUp).Value)
For j = 1 To Max_stream
The problem with the code above is the last If, in which the function "rekursivloop" calls itself. I don't know if this type of formulation is correct, but for the cases the If condition is TRUE (ie ut1 <> ""), the function does not return any answer. Does anyone see an error in the logic or have some example for how to write similar recursive loops?
View 8 Replies
View Related
Feb 21, 2010
I have a problem with one of my loops, it takes about 17 seconds to do the job of calculating a simple moving average for 200 periods on 20,000 rows. However, if I do the "FillDown" function for the same type of average, it takes 1 second.
Here is the code for the loop:
View 9 Replies
View Related
Dec 19, 2007
could provide me a loop function in VBA for these calcultions.
Cell A1*E1 + B1*F1 + C1*G1
Cell A2*E1 + B2*F1 + C2*G1
......till
CellA100*E1 + B100*F1 + C100 * G1
These are the calculations for E1-G1.
The process must be repeated till E50-G50
So the second step is:
Cell A1*E2 + B1*F2 + C1*G2
Cell A2*E2 + B2*F2 + C2*G2
......till
CellA100*E2 + B100*F2 + C100 * G2
View 12 Replies
View Related
Dec 26, 2013
I'm trying to use match function to find the max value that is less than a given value. look at my file. I think it should return F as the value, why is it returning G?
View 11 Replies
View Related
Dec 17, 2009
=MATCH(9.999999E+307,B12:Y12)-1
=MATCH(9.999999E+307,B18:Y18)-1
So what is this pulling and how does it change depending on the data?
View 2 Replies
View Related
Nov 23, 2009
I'm using the match function to tell me in which column the first positive/non-zero number appears. However, the formula is returning the # of columns in the range. Here is what I'm using:
=MATCH(1,H6:CA6,TRUE)
I'm getting 72 back as a result, which is the number of columns between column H and CA.
Any ideas why this is the case?
View 10 Replies
View Related
Feb 10, 2010
I have the below code sent in by a MR Excel forum user
Public Function BigMatch(rngIndexColumn As Range, varMatchValue As Variant, rngMatchRange As Range) As Variant
Dim lngCol As Long
Dim rngCell As Range
lngCol = rngIndexColumn.Column
For Each rngCell In rngMatchRange
If rngCell.Value = varMatchValue Then
BigMatch = Cells(rngCell.Row, lngCol).Value
End If
Next rngCell
End Function
when using the BigMatch Function = BigMatch(any cell in the column you want to pull from, the value you want to match, where you want to find that value)
I am using 2 different sheets, Technology & Lessons learnt: when I try the BigMatch Function
=BigMatch(Technology!C17,'Lessons Learnt'!A46,Technology!W17:AD27)
Instead of returning 'Technology'!C17 its returning the value from Lessons Learnt C17,
View 9 Replies
View Related
Feb 13, 2014
I have a very long function I created. But I need to edit it in a matter I have never done before.
Below is my function and i will like to add a new condition to it.
IF the text value in cell C7 is equal to any text value in Workbook2 B10:K10 and the value underneath that cell (I.e if B10 then B11 etc..) is Deleted then I want to have one of the conditions of my function below display "Deleted".
=+IF(AND(E7<=0,J7<>0,Y7<=0,AO7<=30),"Check Inventory",IF(AND(E7<=0,J7<>0,Y7<=0,AO7>=60),"Delete Listing ",""))
View 2 Replies
View Related
Feb 23, 2014
Using the address function to find the exact cell of a unique string text.
I'm using the following command to find the address of a string i have in a different cell.
=ADDRESS(MATCH("*$H$1*",A:A,0),1)
The string text is in cell H1, H2, H3.......(or on another sheet). The goal is to find the address of a cell containing the unique string text from cell H1, H2, H3.....(that entire column) in a sheet with 13,000 lines. Basically, searching for a specific cell address of a string text referenced from another cell.
View 2 Replies
View Related
