I'm looking to use a do until/loop code to find a cell that equals a named range ("Clause") that is located on another worksheet, the code I have so far is:
[Code] ......
I've used something similar before and works, but I just cant get it to work. The values that I need to find the match to the ("Clause") cell are directly below the original activecell.
I created a sheet that asks the user a question and they have to pick a value for two types of categories. One to the left of the question and one to the right. I am trying to populate a scatter chart based on the range picked for each category. An example of the way my sheet is arranged is below. Does anyone know the macro I would create or any other way to do this?
View 4 Replies View RelatedI’m having some difficulty getting my code to work. On a worksheet there are pairs of columns containing data; the leftmost column’s range is named. I have a userform with several optionbuttons that are named with the corresponding range names. I can successfully populate the userform's combox with unique items from a named range that is selected with the optionbutton.
When user selects item with combobox, I want to parse that named range with the combobox value, selects the value in the corresponding row (to the right) and then populate the userform's listbox with that value. The nonworking code is given below:
Private Sub cbxFiltList_Change()
Dim fCntrl As Control
Dim TempRange As Range
Dim TestRange As Range
Dim cLoop As Range
Content_lbx.Clear
For Each fCntrl In UserForm1.Frame1.Controls
If TypeName(fCntrl) = "OptionButton" Then
'If the optionbutton = True then the make the range to be tested the same name as that of the optionbutton'..............
i have a range of rows that change (could be 10-100) how do i loop the range to create new worksheets named for each row?
View 3 Replies View RelatedI know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View RelatedI have been trying to figure out how to solve an issue. Each month I have a group of customers with data, about 7 columns, and the number of rows varies each month, in the thousands. I want to compare the group from one month to the next. I have been trying to use a named range and have something in VB that compares or matches the ranges. Is this possible? I am having a terrible time getting it to work.
I need to know what has changed, remained the same or completely dropped off. I need the entire row of information carried to a new sheet named "results". The information will be in a workbook with the prior month sheet named prior month data and the new month as current month data. There are headers to row 7.
I have a problem with an offset match function. What I want to do is look at the value in cell C3 and then match it to a location in a named range and then return the value 8 rows above. The problem is the named range contains non contiguous cells i.e. D10:AE10, D22:AE22, D34:AE34. So if the value appeared in the area D10:AE10 it would return the value in the matching column row 2. How to do this I have tried lots of combinations but they just come out #N/A.
View 3 Replies View RelatedIs it possible to use Match to find a value within a Named range and then, based on that value, use Match and Index again to find a value two columns across?
I have a list of clients in Column A, with 10 cells between each. In Column B, I have a list of currencies (the same currencies next to each client) and in Column C the rate this client pays for this currency. I want to reference these rates from an external workbook. Is there any way to use Match to locate the client name, then use Index/Match to locate the rate for a particular currency, somehow telling Excel where to look the second time?
I have named ranges locally in the active file and a named range in a different file.
How do I call these ranges into the VBA code to evaluate them.
I am using Andy's scrolling chart, and it is working well. http://www.andypope.info/charts/Scrolling.htm. Is there a way to paste the data the chart is displaying into a new sheet? In VB I tried to copy the named range and paste it but it did not work.
View 2 Replies View RelatedI am using follwoing piece of code for offset function. For Some reason it is not working.
Reference = Cells(TableRowNumber, TableColumnNumber).Address
Col = Application.WorksheetFunction. CountA(rngF.Columns(TableRowNumber, TableColumnNumber).EntireColumn)
ActiveWorkbook.Names.Add Name:=TableName, RefersToR1C1:= _
"=OFFSET(Reference,0,0,Col-3,1)"
Col value is also being calculated to zero. TableRowNumber and TableColumnNumber are the variables which store the starting location of the column.
I am getting a compile error for named range, the code is below:
View 2 Replies View RelatedIf I omit the column arguement in resize I get error.
Dim ii As Range
EndRow = MyPL.Range("c" & Rows.Count).End(xlUp).Row
Set ii = Range("Data")
q = (EndRow - ii.Rows.Count)
Names("Data").RefersTo = "=" & ii.Resize(ii.rows.count+q, ).address
End Sub
I am trying to clean up my code by using named ranges so that it will still work if/when others add columns or rows to the spreadsheet. These should be pretty easy solutions for most of you but I can't seem to find any answers online.
Here are 2 examples of the code I am trying to update:
I was thinking that replacing "A" with "namedRange" would work but I suppose that's not how the Columns application works. How can I modify the code below to work with a named range instead of the fixed column "A"?
[Code].....
For the following I would have thought that replacing "AU" with "namedRange" would do the trick as that's how things have worked for me in the past using the Range application. Unfortunately I get an error when I make the change.
[Code] .....
This seems really basic, but I can't seem to find it...
Using Visual Basic, if I have a named range, lets say like "NAMEDRANGE", how can I refer to cells in that range by their position in the range? For example, if I want to refer to the cell in the 2nd row and 3rd column of the range.
Also is their an easy way to refer to the first(top-left) cell in a named range?
I am using the following Selection_Change Event to show a UserForm when a cell in 1 of 31 named ranges is selected.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Count > 1 Then Exit Sub
Dim i As Long
For i = 1 To 31
If Not Intersect(Target, Range("StatPost" & i)) Is Nothing And Target.Value = "" Then
If Target.Offset(0, -8).Value = "" Or Target.Offset(0, -7).Value = "" Or Target.Offset(0, -6).Value = "" Or Target.Offset(0, -5).Value = "" Or Target.Offset(0, -3).Value = "" Or Target.Offset(0, -2).Value = "" Or Target.Offset(0, -1).Value = "" Then....................
Sub do_it()
Dim x As Range
Set x = Columns(4).F ind("*test*", lookat:=xlWhole)
If x Is Nothing Then GoTo 999
r = x.Row
Cells(r, 1) = Cells(r, 1) & " (W)"
999
End Sub
I need the above code to continue down column 4 and add the " (W)" to the entire column.
The code stop when it finds the first match.
Let's say you have a named range, Rng1, which consists of cells A1 & A2. In vba how would you report back what, if any, named range the following cells resides:
Code] .....
here are multiple named ranges so using intersect is not feasible. Essentially, through code, I will be given a range and I need to determine if that range if part of a named range.
I created a user form that has two textboxes on it. One is to enter a person's name that gets put into column A, starting at row 4, and the other is to enter a number into column B, starting at row 4.
What I would like to do is for the form to search the names that have been entered in column A for duplicates in the same range. If the name is not there already, then I would like it to operate as normal. If it already exists, then I would like the number in the text box to go into column C in the same row as the name.
Here is the code I have already on the Submit button:
Private Sub SubmitButton_click()
Dim emptyRow As Long
Sheet1.Activate
emptyRow = WorksheetFunction.CountA(Range("A:A")) + 4
Cells(emptyRow, 1).Value = Guestname.Value
Cells(emptyRow, 2).Value = Roomnum.Value
Unload Name_usrfrm
End Sub
Is this possible? I have to make it more complicated, but once I get the basics, I might be able to figure it out myself.
I need to create a named range on multiple sheets with the same named range & i cant figure out how to do this. EG :- I want to create a named range called "_SubUnitRows" on sheet1 starting from "A1:A50" & other named range again called "_SubUnitRows" on Sheet2 starting from "A1:A25" ...
View 2 Replies View RelatedI'm trying to make my named ranges remember the values of the last active cells used within another named range. The purpose of this is to make my charts dynamically change dependant on two criteria selected. My spreadsheet currently updates itself as and when I change the active cell within a single named range, dynamically changing the chart data by using Lookup based on the active cells value. However I want to get away from having several charts showing, I would like to have a single chart which dynamically changes based on a second selection. So the first selection is for a department (Facility) which changes the chart data relevant to that department, the second selection is to dynamically change the chart shown for the pre selected department.
Picture2.jpg
Using the following code when updating just one criteria with several charts
VB:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Application.Intersect(ActiveCell, [MeasureType]) Is Nothing Then
[valMeasurePicked] = ActiveCell.Value [code].....
which works fine but I'm not sure how to add a second selection criteria because my code uses Activecell. I thought that the VBA needed to set the last used value of a range as a variable and therefore allow the second criteria to be selected but am not sure how to put it into practice.
if I can use a named criteria as well as a named range. In essence what I am looking to do is count certain cells that meet the criteria in a certain named named range,
View 9 Replies View RelatedMerge two columns into one list in excel
I would like to combine List1 and List2 into a 3rd named range called List3. I was wondering if this were possible without using any additional cells/columns (i.e. I don't want to use Column C like in the example shown in the link above).
Here's the formula from the example:
Code:
=IFERROR(INDEX(List1,ROWS(C1:$C$1)),IFERROR(INDEX(List2,ROWS(C1:$C$1)-ROWS(List1)),""))
I've played around with it, but could not come with any that worked.
I am using Excel 2010. I have been given a task at work that can save my team a lot of time if I can solve the problem. Every month, we have a spreadsheet with about 5000 rows that we have to email. In each row, there is a range that we have to email to a specific email. For example, I would have to copy and paste Range A2-R2 in the body of the email, and then email it to whatever email is in cell S2. I would then continue this for the next 5000 lines, making it a possibility that i will be sending 5000 emails manually.
I have been trying to come up with a solution through VBA that would automatically send these emails. My goal is to automatically send the Range A2-R2 to outlook email, then cell S2 into the "To" email address box, and then automatically send it. So far, i have successfully been able to send one row, but cannot figure out how to loop it for the remainder of the rows.
A couple other key points are that I have column headings as well (Range A1-R1). If possible, I want to be able to include the column headings in the email body as well. Example - first email would be range A1-R2. second email would be range A1-R1 and A3-R3, and so forth. The body of the email would also contain a standard script, such as "Please review the information below."
The goal here is to save everyone from having to send 5000+ manual emails. This would be a big boost for my team.
Code:
Sub Email()
Dim rng As Range
Dim OutApp As Object
[Code].....
I'm trying to define some ranges with a loop but being a newbie at VBA I'm finding it difficult to solve the error in the code.
First, as the data area is uncertain (variation in the number of rows and columns) i look to the end of the entire data area. Then i want to define intervals of 250 rows with a 30 row difference between each of them. Here is my
i am trying to write a macro to loop through a column of data, creating a named range each time it encounters a certain string. so, it inititially finds the first instance of the string, then finds the next instance, offsets one row back and then names that as the first named range. how do i get it to actually loop through the column until the end of the data?
I can get the first range named but can't figure how to get a loop into my macro to repaeat the process.
Code:
Sub x()
Dim rngTemp As Range
Dim rngFind As Range
Dim rngFirst As Range
Dim rngLast As Range
Dim nom As Range
Dim strFirstAddress As String
[code].....
I have a table (approx 10 rows x 10 columns) that I am trying to lookup. I have to first look across the top of the table (cols 2-10) to find a name, then look down for a value (exact match) within than array and then find the corresponding value (in that position) in the 1st column. I have used 'name manager' to name these arrays (in columns, rows 2-10).
I have setup the names of the arrays with a drop down list (as per some utube videos). When I try to evaluate the match function (with the array name as a cell reference) i get #value. When I directly type in the name of the array into the match function I get a correct answer.
Should I be using other functions such as indirect, choose, etc instead?
I have two columns both of which lengths will vary depending on the time-frame entered by the user but will be the same as each other for each run of the code. Because of that, I'm trying to create a named range for each column and then execute an Index Match with an Offset off of it. Below is my code which results in an "Object required" error message.
Code:
Dim Ticker As Long, Tick As Range, TIK As Range, RoleDt As Long, RD As Range, endDate As Variant
Ticker = Range("F" & Rows.Count).End(xlUp).Row
RoleDt = Range("E" & Rows.Count).End(xlUp).Row
Set TIK = Range("F2:F" & Ticker)
Set RD = Range("E2:E" & RoleDt)
cell.Formula = "=INDEX(RD,MATCH,(RC[-1],TIK,0)+1)"
Column A contains State names; column B contains a few cities for each of the states. Row 1 contains rank as the header row. Then the table begins in cell C2 with the rates. I have two of these (on separate sheets), one titled w dep (with dependants) and the other w-o dep (without dependants). On a third sheet I have 4 combo boxes.
1.Chooses between Dep or W-O Dep
2.Chooses Rank
3.Chooses State
4.Chooses City
Here are my questions.
•How can I filter down the cities so that if I chose Texas for example, only the cities from Texas would show up in my combo box?
•I have figured out the formula to display the results from the w dep sheet but cannot get the information from the w-o dep sheet. Here is the formula I’m using.......
I have read post re this question but have not been able to answer my problem. I get the error message 'Application defined or object defined error' when running the code below. I should indicate the range counter currently indicated about 6,200 rows that this code will work on and the individual range names in the list of 6,200 rows are spread over at least 20 worksheets.
The code appears to be running but after some time it stops on the line of code 'Range(Cells(i, 1).Value) = Cells(i, 2)'.
Sub PopulateWithImportData()
Dim counter As Integer
counter = Sheets("Imported Data").Range("Counter")
Application. ScreenUpdating = False
Application.Calculation = xlCalculationManual
Worksheets("imported data").Select
Range("a1").Select
i = 1
Do Until i = counter
Range(Cells(i, 1).Value) = Cells(i, 2)
i = i + 1
Loop