I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
Below is the data.
10010
10011
10011
[Code] ....
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I have a financial model (attached) which calculates the final cash flows (in a calculation sheet named 9.Operations, rows 428 to 437) for a particular plot. However,the model has a list of 17 plots in the input sheet (3.Input-Plot Details). The macro must change the plot number in the 9.Operations sheet(cell G11), re-calculate the final cash flows and paste all the final cash flows for 1 to 17 plots in a single separate sheet consecutively.
View 6 Replies View RelatedSimple loop macro.
1) Select/Copy rows 1 thru 35 of column C from "Start" tab.
2) Special Paste/transpose them in row 2 of "Finish" tab (1st 35 columns in row 2 should fill up).
3) Go back to "Start" tab, move exactly three rows down from bottom of previous selection in column C and copy the next 35 rows (rows 38 thru 72 in column C).
4) Again return to "Finish" tab, and special paste/transpose in next row down (row 3 in this case).
5) Continue to repeat this action until all rows of data in column C have been copied and transposed/pasted from "Start" tab to "Finish" tab. Variable number of rows on "Start" tab.
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
Let's say sheet - "delivery" - has a row1 that includes all possible delivery days. So A1 is 1.9.2013, B1 is 15.9.2013, C1 is 1.10.2013 and so on.
I want to make a macro, that will gradually go through whole row 3 in sheet "delivery" and look for "A1" date in sheet "Orders". Sheet "orders" have for example in column B the date of delivery, and in column C product of the delivery.
I want the macro to find all deliveries with "A1" date, and paste all products that will be delivered on this day under cell A1 (sheet delivery). then move on to the cell B1 (sheet delivery) - find all orders in sheet orders, that will be delivered on B1 date, and list all products with this delivery date under cell B1 (sheet delivery).
Example:
Sheet order
A
B
C
Date of delivery
Product
1.9.2013
orange
[Code] ........
Unfortunately simple Pivot table is not able to do this simple list.
I already have code that I believe is supposed to do what I'm trying to accomplish. However, it doesn't fully work. The Macro is below:
VB:
Workbooks.Open Filename:="C:Documents and Settingsplp138DesktopExample 1.xls"
On Error Resume Next
With Workbooks("Example 2.xls")[code]....
Basically, what I'm trying to accomplish is to have a certain range from one file copied, and pasted in the next available (empty) row of another file. While debugging I see that everything is working except for the actual pasting.
I am working with some data that consists of two types of messages: one containing vessel speed and another containing vessel type. Both messages share a common ship identifier number. What I'd like to do is run through column A (ship ID), check column B (ship type), and if column b has a value, to paste that value in all instances of that ship ID.
View 1 Replies View RelatedI have a macro which opens two different hyperlinks in excel. Opened workbooks have are named like 1.asp and 2.asp. Both contains only one spreedsheet. I need to copy these spreedsheets to the Workbook, from which they are opened.
View 4 Replies View RelatedI have a current macro that saves each sheet as their own file. The first 10-15 sheets are not really necessary, so I typically delete them once the macro has run. I am looking to add two things to my current code:
1. Add a tab called Start. Make the macro look for 'Start' tab and then just save each sheet to the right of that as its own file.
2. Save each sheet in the macro as just a copy/paste value. They current have a lot of links and it makes each file close to 3MB. That makes it incredibily difficult to paste all in one email.
Here is the current code:
Sub CreateWorkbooks()
'Creates an individual workbook for each worksheet in the active workbook.
Dim wbDest As Workbook
Dim wbSource As Workbook
Dim sht As Object
Dim strSavePath As String
On Error GoTo ErrorHandler
[Code] ..........
I have a table of data 100's rows 10 cols. In col A is a name like USA - these refer to sheet names in the workbook. The other cols are numbers.
I need to write a macro to start at row A and go down the rows 1 at a time and copy and paste that row to the bottom of the sheet named in Col A.
Actually needs to insert at the bottom of a table in the USA col rather than just paste as there is other data further down.
I have a base excel file for summarizing some data, the problem is that the data comes from a different excel spreadsheet. What I want to do is make a function that pulls the data from another spreadsheet into my base file. It would be easy if it were just one excel sheet, but this job would require where the data is pulled from a data file which has many modified versions.
Can anyone tell me how to do this? The files with the data will be structured the exact same but with different data entered in. I just want a button so I can click the file I want the data from and have it show up on my summarizing base file.
I'm using Excel 2013 on Windows 7.
I have an Excel file which has a macro that sucks in data from a number of separate files (two Excel, a varying number of csv). The macro grabs all the individual files and loads them into one of three worksheets with some formatting, sorting, and structuring on the way. All good so far.
I then need to take two of the worksheets and copy them to a new Workbook which I can send out to some users. So I use the Workbooks.Add method, and use the Selection.Copy on just the data (UsedRange.Rows/Columns.Count to ensure it is only the data) and Selection.PasteSpecial with the xlPasteColumnWidths, xlPasteValues, and xlPasteFormats options to copy the data over. None of the data is filtered. Just straight data.
I would expect the newly added workbook to be smaller than the one with the macros because the one with the macros has two extra sheets that I don't transfer, and the sheets I do transfer are identical.
And that's where it gets weird. The file with the macros and more data is 18.7Mb, but the new one with only two sheets is 24.8Mb. One is .xlsm and the other is .xlsx (because it has no macros).
I've tried opening the new workbook and saving as .xlsm (no material difference to the size) and as .xls (it got even bigger). I've opened the new workbook, gone to the end of the data and deleted all the blank rows and columns, but no effect (because the rows are already empty).
Why would the file with less in it be so much bigger (or bigger at all)?
I have a folder containing 40 single sheet excel workbooks and I would like to automate following tasks:
- Open each excel file (need to open the file so as to update it since it gets the data from another workbook through =formulas)
- Copy paste as values
- Save this as excel html in the same folder as original excel files (keeping the original file name)
- Close (original excel file should not be changed ie formulas should remain in place, only the html file will contain values)
- Since there will always be xHtml files with same name need the macro to replace the excisting file
My abilities with excel are limited to functions, no VBA knowledge other than finding ready codes and pasting them in the module.
Since this routine is to be run almost daily the macro should run all files, instead of one by one.
I just hope that I am not asking too much for excel to handle and I hope that explanation is clear.
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData()
For Each cell In Range("A1:A1") ' Where to look for the date
If cell.Value = "AIM Land Services Ltd." Then ' The date
Range("A5:O350").Select ' What is the range to copy
Selection.Copy ' Copy it
Sheets("Invoice_Log").Select ' Select the Sheet it applies to
Range("A5").Select ' Where to paste the data
[Code] .........
I need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
FC_Macro_Sample.xlsm
How do I create code that will copy and paste 30 rows of data
Copy from filename "Record1", worksheet name "CA3M", in column A and B, and Paste data in filename "Record2", worksheet name "CA3M"
- Column A 30 rows of data paste into A20:A49 of the new file and worksheet
- Column B 30 rows of data paste into E20:E49 of the new file and worksheet, prior to pasting these results remove all dashes "-" eg.0-0-1 = 001
The location of the 30 rows of data to be copied changes, so the code should always look for the following information in the row before and after the 30 rows to copy in column A and B:
- Find the 30 rows of data in Column A and B where the first row immediately follows the row with the cell result "Account Date" and the last row is immediately before the row with the cell result "Previous Page Page".
Also, I will probably have to update the code to repeat this function for several other worksheets within these 2 files after my database is completely built.
I am having trouble creating a macro for an excel file I am working on. I do not have much experience writing macros, so I apologize for any confusion. I have created a simplified version of the file I am attempting to write a macro for and attached it to my post here.
At this point it would be helpful for you to open up the attached file so that you can understand my explanation.
Basically what I want the macro to do is:
1. Match up "Product" on Wksht(Input) with "Product" on Wksht(Data).
2. Copy the "Usage per ton" and "Dollars per ton" values corresponding to the given product from Wksht(Input) to Wksht(Data) for the correct month. (The user will manually enter the month, ie "August 09" into Wksht(Input) each month when he runs the macro.)
++The color fills will not exist on my finished macro. I only put them there to illustrate the values that will be copied and pasted.
I want the macro to be written with Loop commands so that it will check to be sure the product number matches with the given location for pasting the data values. I should also note I use PasteSpecial_Values because of the formulas in the cells on Wksht(Input).
I'm trying to figure out how to copy & paste the following conditional formatting down the column.
The conditional formatting I'm using is in cell A1, D1, G1, J1, M1 (so I have to Ctrl click each cell manually & I then choose to "format the values that rank in the:" "bottom 1" & format it green.
I want to copy and paste that all the way down column A, D, G, J, & M and have the conditial formatting pick for each row, not the whole column. eg. A2, D2, G2, J2, M2... A3, D3, G3, J3, M3...
Example:
from cell b12 to i5, then
From cell d12 to j5 then
From cell d13 to k5 then
From cell d14 to l5 then
[Code]...
Each time back to cell b, i have to add 3 cells, like from b15 to b18.
I would like to automate this process, but i did not know how to make macro increment by 3. Etc. I have hundreds of numbers to deal with.
Is it possible to create a Macro where I minimize the work of copying the data from one tab and pasting it into another tab, in a specific cell..?
Summary:
I have a pivot which contains data like; Location, PO, Date, NCM, Inv & Total. There are different Locations such as AHM, BHU, BLR, CHA, and so on; and there are different PO, Date, Inv, NCM and the Total Amt. Each Location has 2 types; 1st AHM-1 & AHM-2, and so on.
My Requirement is;
I want the data to be pasted automatically in the respective tabs, referring the pivot.
Eg: the Pivot has the below details;
Location
PO
Date
NCM
Inv
Total
AHM
1234567890
15.04.2013
2000000420
13I0MH2I1001
3607.76
[Code] ..........
The Location AHM has two rows which is referred an AHM-1 & AHM-2.
In AHM-1 & AHM -2 The PO should be pasted in cell B27, Date in cell C27, Inv in cell E27, NCM in cell E31, Price in cell F43 and Descpn in cell C41 with that particular month. In short, where the cells are highlighted in color Green.
The sample file is updated in the below link. [URL] ..........
What I need is the code for a loop which copies a formula from cells E1 and E2 and then pastes it, staring at C7 and then every 32 cells down until row 20000.
View 2 Replies View RelatedThe formula attached here is in cell J4. I pulled this formula down to J26. Then copy J4:J26 and paste to M2:M26, P2:P26, until CG2:CG26. I need 26 times to paste to the range. There are even 4 columns distance between two pasting range.
How can write a For Loop to copy and paste to these ranges?
=SUMPRODUCT(--($E$4:$E$10004=RIGHT(I$1,2)),--($C$4:$C$10004=$H3),$D$4:$D$10004)
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update()
Dim bottomrow As Long
Dim My_Range As Range
bottomrow = Cells(Rows.Count, "C").End(xlUp).Row
Set My_Range = Range("A1:Y" & bottomrow)
[Code] .....
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
Template is created where the users copy/paste the data from other file. Data validation has been performed with the following steps:
1. Macro inserts the vlookup formula into column A, which isused for validating data that is entered by user from column B to E.
2. If the data is incorrect the N/A will be displayed in column A and invalid data will behighlighted in red color in column B.
3. This validation goes through the loop and after the loop is finished the pop message will be displayed and macro should stop so the user can correct the data.
4. After the user correct the data, the macro needs to run again to make sure there is no further errors. If there are no errors, thehighlighted cells should be cleared out of color and pop.
Here is the code that runs by command button:
Private Sub CommandButton1_Click()
Call FindNA
End Sub
Sub FindNA()
Dim ResultRange As Range
Dim ResultCell As Range
Dim iRow As Integer
[Code] ......
I need a Macro that can look in column A to find the date, and then drop down one row and move to column B and then copy the data in that cell to column C back up one row.
I've attached the workbook so you'll know what i'm talking about. I need the green cells to be moved to the blue cells all the way down.
COLUMN A =Date
COLUMN B =Empty Row
COLUMN C=Copy Details
COLUMN D=Paste Details
I am looking for a macro that will allow me to the following:
- search column F for "word1", "word2", "word3", and/or "word4"
- then match the search to row on column C data
- then copy/paste row or rows of matched data unto "Sort" worksheet but only data from columns A, B, C, and F
- also, when copying, copy the row above
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
View 2 Replies View Related