Macro Needs Window And Excel To Be Open/reopened To Function
Apr 9, 2007
I have this module that is supposed to delete rows containing some words and those that are entirely empty..
The macro works fine when I open the file for the first time (excel as well) but subsequently if i try to run it again, the macro doesnt work anymore. What could possibly be causing this bug?
Private Sub DeleteRows()
ScreenUpdating = True
Dim Rng1 As Range
Dim X As String
X = " TOTAL"
Do
Set Rng1 = ActiveSheet.UsedRange. Find(X)
If Rng1 Is Nothing Then
Exit Do
Else
Rows(Rng1.Row).Delete
End If
Loop............
View 9 Replies
ADVERTISEMENT
Jun 6, 2002
What's the code for opening a Windows Explorer window from within an Excel Macro?
View 7 Replies
View Related
Apr 21, 2014
I'm trying to find an ID from a new open Internet Explorer Window.
I know that the ID that I'm trying to search for is "rBeginMonth_BeginDate", but my code always says that it's empty.
The code below is partially of what I've done.
[Code] .....
View 1 Replies
View Related
Jun 19, 2014
I have a spread sheet that I have written that has 2 html links in it. The links work, but they only open in one browser tab. How do I get them to open in different tabs? Opening in two different browser sessions would be acceptable too. I have Excel 2007 and IE 9 but the users may have different versions.
View 7 Replies
View Related
Apr 15, 2013
I compared data between excel worksheets all the time, well recently my computer was upgraded from Windows XP to Windows 7 and since then I have not been able to figure out how to have an Excel file to open in the Excel window selected(or last active window) when I have more than one workbook open. Is there a way to do this?
View 5 Replies
View Related
May 2, 2014
I have a project were i have to make a macro and place in a workbook such that as soon as i open that excel file
1. excel workbook is opened in New Excel window
2. Ribbon is hidden for this new window
i have tried with code stated below it hides the ribbon but new excel window is not open
Private sub Workbook_open()
Application.ExecuteExcel4Macro "Show.toolbar(""Ribbon"",False)"
End Sub
View 1 Replies
View Related
Dec 12, 2013
I am using Excel2010.
My sheet displays values collected from a database via an AddIn. The values are updated by pressing CTRL+G (AddIn function).
I have an OnTime macro running SendKeys "^G" to update the values every minute. When the values exceed a certain limit, a sound is played from a custom Alarm function.
This all works as long as the excel window is active.
But if excel is minimized or another window is opened, the values stop updating until Excel is active again.
When the values dont update the sound is not played and that defeats the purpose of the sheet.
View 6 Replies
View Related
Feb 4, 2014
I have a workbook open. When I try to open a separate workbook, it opens already opened workbook (basically linking the workbooks as one). I want to have my workbooks on two separate screens this is preventing that. How to unlink these workbooks.
View 1 Replies
View Related
Mar 23, 2012
This code takes all the data from a listbox and throws it into a sheet so that I can print it. I would like the print window to open ready to print this one sheet but allow the user to make sure the right network printer is selected before hitting print.
Code:
Private Sub cmdPrint_Click()
Dim i As Long
Dim ws As Worksheet
If Me.lstPrintRooms.ListCount = 0 Then
MsgBox "The are no rooms in the list to print"
[Code] .........
View 2 Replies
View Related
Oct 8, 2006
Is it possible for excel to check that a particular window is open and if it is then carry on with a macro
View 9 Replies
View Related
Nov 8, 2007
Is there a way that I can make an excel sheet and save it in a way that when it's opened the person JUST sees the cells in a really simple window...
Not sure if I'm confusing people in how I explain this... but basically I don't want it to show the scroll bars, the A B C D etc and 1 2 3 4 etc, the tool bars... etc. JUST the specified cells in a sheet.
View 9 Replies
View Related
Jan 25, 2014
So, I've been trying to work out a distribution list. So far, my research has shown me how to code to be able to send a message through outlook by typing content into a spreadsheet, but I'm trying to find code that will simply open a new message window in outlook. I don't want to send it through excel as I've found to be possible b/c outlook is asking for permission to send to each recipient on the mailing list and we have a fairly large staff here, so clicking that button 20 times to allow the email to go through is more labor intensive than just verifying who's on the distribution list and sending.
View 3 Replies
View Related
Aug 12, 2009
Say im in sheet 1 at B2. Am looking to create a button so when I press it a small window opens and displays the data that is it sheet 2 (which is just 2 columns of a list of products and price.
Then I for example double click on a product and it will be added in the current cell.
View 14 Replies
View Related
Apr 10, 2004
I am trying to get the caption that is displayed on each window of all the open workbooks. I am using the code below to loop through all the workbook windows, get their handles and finally display their respective captions on a Msgbox.I am having 2 problems:
1- The code loops only once instead of once for each open workbook !
2- The Msgbox displays an empty string instead of the workbook caption !
If I am not mistaken, problem 2 is due to the fact that the Class name"EXCEL7" used in the code refers to a worksheet and not to a workbook. The trouble is I can't figure out what a Workbook Class name is so that I can use it in the FindWindowEx Function
Code:
Private Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, ByVal lpsz2 As String) As Long[code]......
View 9 Replies
View Related
Apr 10, 2004
I am trying to get the caption that is displayed on each window of all the open workbooks. I am using the code below to loop through all the workbook windows, get their handles and finally display their respective captions on a Msgbox.
I am having 2 problems:
1- The code loops only once instead of once for each open workbook !
2- The Msgbox displays an empty string instead of the workbook caption !
If I am not mistaken, problem 2 is due to the fact that the Class name"EXCEL7" used in the code refers to a worksheet and not to a workbook. The trouble is I can't figure out what a Workbook Class name is so that I can use it in the FindWindowEx Function
Private Declare Function FindWindowEx Lib "user32" Alias "FindWindowExA" _
(ByVal hWnd1 As Long, ByVal hWnd2 As Long, ByVal lpsz1 As String, ByVal lpsz2 As String) As Long
Private Declare Function GetWindowText Lib "user32" Alias "GetWindowTextA" _
(ByVal hwnd As Long, ByVal lpString As String, ByVal cch As Long) As Long
Private Sub CommandButton1_Click()
**Dim BookNameLenghth As Long
**Dim strBuffer As String
**Dim bBufferSize As Long
**Dim lParent As Long
**Dim lChild As Long
View 9 Replies
View Related
Aug 17, 2006
In VBA, how do open 2 new windows, and allow for the fact the file name will change (or name the new windows the current file name)? My current file name is "Metal.xls"
Here is what the code looks like now:
Windows("Metal.xls:2").Activate
Windows("Metal.xls:1").Activate
View 3 Replies
View Related
Mar 13, 2008
I have a userform with several buttons on, each doing seperate tasks, three of the buttons however are used to load a workbook stored elsewhere in our central data storage drive. Loading these workbooks is not the problem, the problem is when loading these they load up behind the userform and not in a new window.
View 6 Replies
View Related
Feb 4, 2009
I'm using this code below sucessfully to open a specific folder view window. What i'm looking for is a way to amend it slightly so that when the window opens the 'folder tree' on the left hand side does not show, as it always does at the moment.
View 2 Replies
View Related
Aug 21, 2013
getting the username of an unshared file on network. When I click on file I'll get this message "...already open by " its blank.
I have found 1 code but it is not working on office 2013. VBA function to get username of open file on network?
View 4 Replies
View Related
Oct 5, 2011
The below code opens up the printpreview window. This does not allow to select the correct (or change) printer it will automatic use the default printer.
Is there a way for the code to open the print window so I can change the printer and select number of copies?
Code:
Sub Print_Button()
Dim ws As Worksheet, cell As Range
Set ws = Sheets("main")
Set cell = Range("g2000").End(xlUp)
Do Until cell.Value ""
Set cell = cell.Offset(-1, 0)
Loop
ws.PageSetup.PrintArea = ("A2:" & cell.Address)
ws.PrintPreview
End Sub
View 3 Replies
View Related
Oct 5, 2012
I have to run a report each morning and in once cell I need to pull in the contents of another cell from another worksheet. I'd rather not have to open the additional file each morning to copy and paste special the values so I'd like to add to my current macro to pull this data in automatically. I have to do this for two different reports/portfolios and the data I am pulling in for each portfolio is located in the same exel file but under two different tab names, the portfolio names 2010 and 2045.
Deliverables
The spreadsheet I am pulling data in from is located here:
K:Risk OversightMarket RiskTracking ErrorBARRA
and the file name is: Daily Barra Tracking Error.xls
Tab name would be 2010 for the 2010 portfolio or 2045 for the 2045 portfolio The vlookup will be from "A32:B2500" and I would like to incorpoprate an IFERROR function that returns "" in the event of an error. Column "A" are dates and column "B" is the data I need to pull in.
Receivables I am pulling the data into cell "J23" of a summary report (sheet 2) and would like the vlookup to read something like this:
IFERROR(VLOOKUP("K1"Active.Workbook.Sheets2,[K:Risk OversightMarket RiskTracking ErrorBARRA"&"Daily Barra Tracking Error.xls"(Sheets)]."2010""A32:B2500",2,0),"")
This should return a blank cell if the date cannot be found in the data spreadsheet and return the correct data for teh correct date being referenced in my summary sheet.
how to do the bracketed parts for pulling in the right spreadsheet and tab.
View 9 Replies
View Related
Nov 6, 2011
I use Excel 2003 at work. I'm looking for some code that will Open a folder and then lets the user to select a file then continues to run the macro.
The file name they select will look similar to this K2271011.504 or K3011111.201
View 3 Replies
View Related
May 16, 2014
I have a folder which has a set of files (Files may be anything like excel,pdf,word..etc).My rrequirement is: When i run the macro the first file to last file should open and wait for 5 sec and then close..I mean first time the first file should open and wait for 5 sec and close..Next 2 nd files shoul open and close after 5 sec..next third files should open and close after 5 sec...Like wise till last file..Is this possible to achive through macro code..
View 7 Replies
View Related
Jul 18, 2014
I have created several excel files as I cannot open them all at once since they are too large. So I have to open one excel file whilst closing another.
part1
part2
part3
part4
part5
I want a macro that opens the excel file part 1 and part 2. Then it should close part 1 and after closing part 1 it should open part 3. Once part 3 is open, part 2 should be closed and when part 2 is closed part 4 should open. When part 4 is open, then part 3 should be closed and part 5 should open.
View 1 Replies
View Related
Feb 28, 2009
I have several similar documents open. They each have a macro with the shortcut CTRL + SHFT + T. The problem is each macro is different for each book. When I am working on book X, I don't want macro from book Z to run, but it does.
I need all of them to be open.
View 9 Replies
View Related
Sep 3, 2009
I want to put in an if-then statement in a macro that will check to what kind of report i open so it will automatically know what to do with it. Where do I put that macro? I tried it in auto_open in my personal.xlsb file but it stops before the file actually opens.
View 9 Replies
View Related
Jan 5, 2014
I am an extreme novice to using macros.
I used the 'record macro' feature to create the following: I created a rectangle box on sheet1 of NEW TEST.xlsm to link to the macros incidated below. Niether macro moves on after reaching the Workbooks.Open statement.
I am at a loss. Is there something in Excel that needs to be set? Is there something else that I need to do version of Excel is 14.0.6129.5000 (32 bit) MS Office Professional Plus 2010
What I am trying to accomplish is this: From 'NEW TEST.xlsm', open an excel file on the network, add a new sheet to this network file, calling it 'Pivot'. Then create a pivot table in this new sheet from the data in sheet data1 of this same network file. Then move control of macro / processing back to the NEW TEST file. Eventually I will do more, but for starters, I cannot even get the macro to add / name a new sheet in the network file.
[SIZE=3][COLOR=#000000][FONT=Arial]PS I have attached the NEW TEST.xlsm fikle as we as the data file. NOTE: the data file has been reduced to one day's worth of data, to to the upload file size.Also, my Excel Trustred locations has "Allow trusted locations on my network" checked, and the network location to the data file in trusted user locations.
VB:
Sub Open_Add_Sheet()
Dim filename, filelocation As String
Dim wb As Workbook
filename = "11 Nov, 2013 GDO AHS Agent Productivity Report.xls"
filelocation = "R:acharukAHS ReportsGDOGDO CSR ACTIVITY Report2013" & filename
Set wb = Workbooks.Open(filelocation) '
' Open_Add_Sheet Macro
[Code]....
View 9 Replies
View Related
Feb 24, 2009
I wanted to run a batch file which does something like,
Dir /b >Test.csv
Start Test.csv
And then runs an Excel macro once the workbook is open.
I looked into this and discovered that it’s not really that possible to run an excel macro through batch file but other options were to use ‘Workbook_Open’ etc.
I thought this might cause problems because Test.csv doesn’t contain a macro to auto open and because csv’s usually don’t like macros.
I do however have personal.xlsb which opens every time if that helps.
View 6 Replies
View Related
Oct 19, 2012
I just need a macro to open any excel file may be 2003, or 2007 from a folder.
I did tried Dir but not working. I want the macro in 2007.
View 4 Replies
View Related
May 3, 2014
I have a project were i have to make a macro and place in a workbook such that as soon as i open that excel file
1. excel workbook is opened in New Excel window
2. Ribbon is hidden for this new window.
So when user closes this excel window there is no problem with other workbook ribbon, as there are open in different window
I have tried with code stated below it hides the ribbon but new excel window is not open
Private sub Workbook_open()
Application.ExecuteExcel4Macro "Show.toolbar(""Ribbon"",False)"
End Sub
View 2 Replies
View Related