I need a macro that will clear out all zero's in columns D8:O?
The amount of rows vary, but should never exceed 1000. I'am not wanting any cells to shift. Just the contents deleted.
In other words, if e5 contains the value 0, I need it to not contain anything.
The exception is the total row.see file for example.
I have set up a macro to clear data in COl A from row 2 onwards. I need to amend the code to clear the data in the following columns from row 2 as well
Col C to I and Col L to O
Sub ClearData()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 2 To LR
With Range("A" & i)
.ClearContents
End With
Next i
End Sub
I'm having a problem with a macro clearing a formula in a cell. I have the same type of cell that doesn't have the problem but I can't find the difference between the 2 cells or difference in vb that's making it happen. I have to intentionally cause this to happen but don't see why it's happening. Do I need to attach workbook and describe what's happening? I have been copying and pasting from different sources as well as paying to have it created/started but it was expensive(for me) and I make nothing off of it, just use it at work. I am not proficient in Excel or vb but I'm desperately trying to learn as I go so as not to fork out a few hundred dollars again.
here's atleast the vb for the macros:
VB:
Sub clearclientinfo() '
'
'
'
Sheet5.Select
[Code].....
I'm trying to clear the data on columns Q thru AE on which ever row I am on.
View 3 Replies View RelatedA few days ago I had a list of values in column A, and wanted to display in column B, in the cell where the cursor is when the macro is started (let's call it Bn), the sum of values (An:An-11), where n can be any row where there are values to be added.
"XLD" showed me how to clear the values from the column where the cursor is when the macro is started, and how to display in that cell the sum of 12 values in the adjacent column.
I have a dynamically named range the contents of which I want to clear. However, I also want to clear the cell contents in the next column beside the range. So if my dynamically named range is A20:B40 can I clear the contents of A20:C40 without changing the initially named range. Background: The data I have is the result of an advanced filter. The range is named for printing purposes without the final column.
If I then change one of the raw data I want to run the filter again. To do this I need to clear the first filter.
Range("AIT_Change_Management").ClearContents
I am currently using this Code to search column1 for a Key Word that is entered into textbox "Kunde" on my userform.
[Code] .....
What i would really like to be Abel to do is :
Search for the cell in column1 with =Kunde.Value
Clearcontents of this cell and the 2 adjacent to the right.
i.e. Word is found in A7
Cells A7:C7 contents are cleared and fill Color returned to default colorindex 0
Below is my initial code that can't get past the first line.
if right(cells(2,i),4) = "D_MA" then ..... ?
I'm trying to clear the contents of all data in each column that has the text conaining "D_MA" in that columns row 2. For instance, if cell F2 has 30D_MA, I want the macro to clear all contents in Column "F" -- but to do this for all columns that contain "D_MA" in row 2.
I have written a VBA procedure which is supposed to hide unneeded columns (based on the a number entered in a certain cell. This is working so far. Since I need to sum only the visible cells in a row i need to clear the contents of a range of cells if they will be hidden. Unfortunately the code i have written runs only to the ClearContents and then starts over from the beginning. If i take out the .clearcontents and put .Select for example instead, the code runs perfectly.
Here is the
Sub worksheet_calculate() 'Hide columns that are not needed
Sheet1. Unprotect
Application. ScreenUpdating = False
Dim i As Integer
Dim r As Integer
Dim s As Integer
Dim rngRange As Range
i = 2
i have the following macro when cell value in column "K" changes, it distributes the data accordingly.
however, the issue is, if i change the value in K (which is a date), so another value, it leaves the distribution in tact....i want to apply "clear content" and then make the macro re-apply.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Left(Target.Address, 3) = "$K$" Then
Dim srt As String
[Code].....
I have data in columns a,b,c and d from row 1 to about 200 right now. Every week another 9 rows are added. I wanted to create a macro that will delete the last 9 entries in each column.
I'm trying to figure out code to have only the contents of cell 'a2' cleared when the contents of cell 'a1' is changed. The issue is that both cells are derived from lists and I don't want the formats cleared.
View 9 Replies View Relatedif I had text in column A, I would like to clear all the cells to the right and leave the text in column A.
Also, if I had text in column A and B, I would like to clear the cells to the right.
I've reformatted the spreadsheet, and now some of the data are in merged cells.
The code lnow ooks like below, (Which I thought would work) but it doen't work ,,, and I'm not sure why
Sub Clear_Risk_Data()
If Range("J5:K5,D12,G11:H11,M11:O11") = Empty Then
MsgBox "No data to Clear."
Else
Range("J5:K5,D12,G11:H11,M11:O11").ClearContents
MsgBox "All Data Has Been Cleared", vbInformation
End If
End Sub
My sheet (An excel 2007 macro enabled version), I've just uploaded here, in case anyone needs to view it, I just don't know why it won't work?
[url]
There are just 4 boxes to clear,
Box 1,, is cell J5 & K5
Box2 is cell D 12
Box 3 are cells G11 & H11
& Box 4 are cells M11, N11 & O11
I need code for a macro that will find a min value in a particular column and based on that min value clear the contents of other cells for that min value.
For example, I have dates in column E such as:
200907
200906
200902
200809
200803
200710
200707
Therefore, I need to find all records for 200707 and clear the contents in other cells.
I can't hardcode the min date because that can change from month to month when new files are created. As can the number of rows.
I'm using Excel 2007.
I have a spreadsheet that I enter data for cash flow purposes on a daily basis. At the beginning of each month I need to clear out the data containing values only as well as values beginnining with an = for eg 20000+50000+25000+74000 etc, but not formulas and text
I need the macro to clear the values , including data that has been added up as explaimned above from row 9 onwards and from column C
I have a protected worksheet in which certain calculations are performed based on certain inputs.
For example, let's take Column E:
Starting in cell E4, I have cells in that column which are input cells and further down the column are calculated cells which are locked and whose formulas are hidden.
I was looking for a macro which would go down col E and clear contents of all unlocked cells without messing up any of the protected cells.
Also, there are certain cells in which I want to clear contents and some cells that I want the macro to insert a "0" value.
The input cells are non-contigous.
I have a macro that
- copies rows from one sheet into another sheet based on a set of criteria
- the very very very first time the macro is run, the first row of data should be put into row 7 (formatting reasons)
- however, every other time it's run it should paste into the next clear row.
But, what is happening is that, each time its run, it puts the data into row 7 => overwriting data.
I've used the offset and counter function but perhaps I need to put it in the header of the code to get it working?
My code pasted below:
[Code] .....
This macro clears all the contents of each sheet to which it refers, however, after putting it to use I find that I need it to clear only columns A-G starting at row 10. I am not sure how to modify it to do so though. Actually it would be even better if it would only clear columns A, B, C, E, F, and G.
View 14 Replies View Relatedwhen i password protect my sheet it doesnt let my clear cells macro work on the cells i need it to clear why is this and what way is there around this completes my complex sheet.
View 2 Replies View RelatedMy Workbook with a macro to clear ONLY the highlighted Cells.
The Highlighted Cells can be found on the sheet "Line 5"
I have made a spreadsheet but would love to be able to incorporate multiple 'Clear Data Buttons', (Macros)
that clear cell data.
I have attached several screen shots of my spreadsheet, with the URLs listed below.
(Images 1-6)
http://tinyurl.com/qba57l
http://tinyurl.com/od9upb
http://tinyurl.com/ovaeej
http://tinyurl.com/pctsvj
http://tinyurl.com/oc2qqm
http://tinyurl.com/qdhzge
Spreadsheet (xls & xlsm) in zip format
http://tinyurl.com/qczlap
It is a trading order sheet that I want to use, but also upload to a blog that I have just
started, relating to trading as a free download, hopefully it may benefit some users/visitors etc.
OK, regarding the macros.
I'm not quite sure how it is best to do it.
In total there are 13 'Clear Buttons.'
11 are 'CLEAR DATA' Buttons
12 is a 'Clear ONLY ORDER SHEET DATA' Button.
Finally 13 is a 'Clear All DATA!' Button
I think it's best if I give the cell location of where I would like the macro buttons located and what data they clear.
Clear DATA - Button 1 - (Is in Cell F3) - To Clear Data, Columns D,E,F & Rows 4 to 13)
Clear DATA - Button 2 - (Is in Cell N3) - To Clear Data, Columns G to O & Rows 4 to 13)
Clear DATA - Button 3 - (Is in Cell U3) - To Clear Data, Columns S,T & U & Rows 4 to 13)
Clear DATA - Button 4 - (Is in Cell F15) - To Clear Data, Columns D,E,F & Rows 16 to 25)
Clear DATA - Button 5 - (Is in Cell N15) - To Clear Data, Columns G To O & Rows 16 to 25)
Clear DATA - Button 6 - (Is in Cell U15) - To Clear Data, Columns S,T & U & Rows 16 to 25)................................
I have a worksheet (“A”) that is populated from a second sheet (“B”). The data on “A” changes as necessary using another Macro. Most of the data on sheet “B” is numeric and comes from various formulas and results in numbers with too may digits after the decimal point. I can format sheet “A” to turn 58.22222222 into 58.2 but when I run a Macro to clear the data I lose the formatting. I need to find a way to clear only the data and not the format, or find a way to add a mask on specific columns in the macro that copies and pastes. Here is the Macro to clear the data.
View 3 Replies View RelatedI am trying to create a marco that clears the columns of a named range if the sum of the cells in the range is zero.
View 3 Replies View Relatedmacro code to clear a spread sheet of all of its content? (The extent of the content can vary.)
View 2 Replies View RelatedI have a workbook that I re-use on a weekly basis. The header information must stay intact (Rows 1 and 2). I recorded a macro that would clear all tabs in the workbook, and that macro is:
Code:
Sheets("Sheet1").Select
Rows("3:1865").Select
Selection.Delete Shift:=xlUp
Range("A3").Select
Sheets("Sheet2").Select
Rows("3:1865").Select
Selection.Delete Shift:=xlUp
Range("A3").Select
Which made me curious if there was a VBA code to say "Clear Worksheet" as opposed to having to explicitly list the cells that need to be cleared?
I need multiple macros to copy information from sheet1 to sheet2 and another to copy the information from sheet1 to sheet3 and so on. need a total of 20 macros each to copy information from sheet1 and paste it to the corresponding sheet number. How to do it and this this is what i want to do, Copy roll A-B-C-D,and G but not E-F-H i have formulas that i don't want to clear or re-do every time it is possible to do this.
a B C D E F G H
HarvestDate VarietyL/P Code Label Pakagin Qty Total
1 12/2/2012 Soda 23 3
1 12/12/2012 plants 24 34
1 12/13/2012 socks 25 22
1 12/14/2012 shoes 26 22
1 12/15/2012 tie 27 22
1 12/16/2012 cds 28 22
1 12/17/2012 computer 29 22
1 12/18/2012 tapes 30 22
I am trying to get a macro that will insert a line above whatever line the text "INSERTXYZ" is in. I'm getting that fine but I also want to clear the contents of cells "A:S" on whatever the new row number is.
Can anyone modify this piece to accomplish that? If you need to tear it completely down, I'm interested in simpler way as well.
Cells.Find(What:="INSERTXYZ", After:=ActiveCell).Select
ActiveCell.EntireRow.Select
Selection.EntireRow.Copy
Selection.EntireRow.Insert Shift:=xlDown
Selection.Interior.ColorIndex = xlNone
Application.CutCopyMode = False
ActiveCell.Select
Selection.Range("A:S").ClearContents
I have a macro that copies data into another sheet (OR) from sheet1 (EDS) but as I don't want the data added from the last row I want it to overwrite and clear any data that was there before. However I still want to keep my headings which occupy rows 1 and 2.
This is the code I was using...
Sheets("OR").Select
Rows("2:30").Select
Selection.ClearContents
Sheets("EDS").Select
This is pretty inefficent but it works. I don't want to make a new macro I like keeping it inserted in my current one. However I couldn't figure out how to get it to delete the rows past row 2 (it could go to infinity but I don't think there will ever be more than 30 rows of data).
I have on sheet1 a number (72 at the moment) of Form CheckBoxes.
In simple terms: I would like a macro to look at each CheckBox and remember its state (Checked or Unchecked)
Then, go through and Check All checkboxes
Call MyMacro
Once MyMacro is complete (Filtering & Printing)
Revert the checkboxes to their original state.
The purpose of the checkboxes:
When Checked column on sheet2 is UnHidden
When UnChecked column on sheet2 is Hidden
Or, UnHide All columns on sheet2, run MyMacro, then "re-hide" the columns that were previously hidden.