I have set up a macro to clear data in COl A from row 2 onwards. I need to amend the code to clear the data in the following columns from row 2 as well
Col C to I and Col L to O
Sub ClearData()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 2 To LR
With Range("A" & i)
.ClearContents
End With
Next i
End Sub
I am currently using this Code to search column1 for a Key Word that is entered into textbox "Kunde" on my userform.
[Code] .....
What i would really like to be Abel to do is :
Search for the cell in column1 with =Kunde.Value
Clearcontents of this cell and the 2 adjacent to the right.
i.e. Word is found in A7
Cells A7:C7 contents are cleared and fill Color returned to default colorindex 0
Below is my initial code that can't get past the first line.
if right(cells(2,i),4) = "D_MA" then ..... ?
I'm trying to clear the contents of all data in each column that has the text conaining "D_MA" in that columns row 2. For instance, if cell F2 has 30D_MA, I want the macro to clear all contents in Column "F" -- but to do this for all columns that contain "D_MA" in row 2.
I have data in sheet 1 like below
Custid loc city
123 us newyork
124 uk wales
876 in mumbai
Sheet 2
custid newcustomerid
123 756
124 394
Outputsheet:
Custid loc city
756 us newyork
394 uk wales
876 in mumbai
So it will check sheet1 custid with sheet2 custid. If both matches it will replace custid with newcustid.if cust id not exists it will load sheet1 recprds as usual.
Looking to code a loop to go to sheets whose names begin with "day" and a number and clear a specific range. How would i code this without affecting the other sheets in the book?
View 3 Replies View RelatedWhat I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
I am using arrays to try and move select data in a row between workbooks. I read in the data to an array, I set the value of the range I want to write to to the array. That part works well.
However, the range I am trying to write to is part of an Excel Table (ListObject). There are formulas in that table that I need to keep as formulas. I know (well, believe) that if I populated the data into the array manually and skipped over the formula cells it would not change those cells at all.
How can I (after populating the entire array with data) go back and say "The data at index 3 is really nothing, so exclude it."
I've tried setting the value to Null, Empty, and vbNullString. My array is currently typed as a Variant.
Example:
myArray = Sheet1.Range("A1:A10").Value
myArray(3) = ????????
Sheet2.Range("A1:J1").Value = Application.Transpose(myArray)
I need a macro that will clear out all zero's in columns D8:O?
The amount of rows vary, but should never exceed 1000. I'am not wanting any cells to shift. Just the contents deleted.
In other words, if e5 contains the value 0, I need it to not contain anything.
The exception is the total row.see file for example.
I have a row (will always be row 3) where each cell contains a day of the week, the days repeats for a year or so, making the row almost 400 cells.
Like this,
Mo - Tu - We - Th - Fr - Sa - Su - Mo - Tu - We - Th - Fr - Sa - Su - and so on...
Though, A3 doesn't have to be "Mo" because the days in this case can change (A3 can start with "Tu"), hence I think I need a macro.
So if this row contains a weekend, "Sa or "Su" I want all the cells in the column beneath that which contains a specific value to be cleared.
Example, if "Sa" or "Su" has 3 values in the columns under them, all the values that contain "X" or "Y" has to be cleared.
Like this:
Rows (1,2,3...,)
1----
2----
3 Mo - Tu - We - Th - Fr - Sa - Su - .. and so on..
4 A --- B --- X --- Y --- X --- B --- Y
5 A --- B --- X --- Y --- X --- X --- X
6 A --- B --- X --- Y - --X --- Y --- C
After the macro it should be:
1----
2----
3 Mo - Tu - We - Th - Fr - Sa - Su
4 A --- B --- X --- Y --- X --- B ---
5 A --- B --- X --- Y --- X --- ---
6 A --- B --- X --- Y - --X --- --- C
Notice the two examples in the excel file.
Excelforum.xlsx‎
I'd like to have a sheet with multiple columns of data (say A thru K for instance.). Id like to reserve column A for ONLY imputing an X. The rest of the columns b-K would have data in the cells. I'd like to have a macro that when it saw an X in column A, would copy all of the data in cells B-K in that row, paste it into the next empty row of a second sheet (for history tracking), then go back to the original sheet and continue looking for additional "X"'s and repeat. Once all of the X's were copied, it would "clear" (Not delete because some of the cells would have formulas in them that would need to remain for future use.) the cells based on the "X" then finally move all of the remaining data up to the empty rows to fill in the empty rows. This last piece would be more for esthetics to have a clean looking sheet.
View 1 Replies View RelatedI've reformatted the spreadsheet, and now some of the data are in merged cells.
The code lnow ooks like below, (Which I thought would work) but it doen't work ,,, and I'm not sure why
Sub Clear_Risk_Data()
If Range("J5:K5,D12,G11:H11,M11:O11") = Empty Then
MsgBox "No data to Clear."
Else
Range("J5:K5,D12,G11:H11,M11:O11").ClearContents
MsgBox "All Data Has Been Cleared", vbInformation
End If
End Sub
My sheet (An excel 2007 macro enabled version), I've just uploaded here, in case anyone needs to view it, I just don't know why it won't work?
[url]
There are just 4 boxes to clear,
Box 1,, is cell J5 & K5
Box2 is cell D 12
Box 3 are cells G11 & H11
& Box 4 are cells M11, N11 & O11
I have a spreadsheet that I enter data for cash flow purposes on a daily basis. At the beginning of each month I need to clear out the data containing values only as well as values beginnining with an = for eg 20000+50000+25000+74000 etc, but not formulas and text
I need the macro to clear the values , including data that has been added up as explaimned above from row 9 onwards and from column C
I have a macro that
- copies rows from one sheet into another sheet based on a set of criteria
- the very very very first time the macro is run, the first row of data should be put into row 7 (formatting reasons)
- however, every other time it's run it should paste into the next clear row.
But, what is happening is that, each time its run, it puts the data into row 7 => overwriting data.
I've used the offset and counter function but perhaps I need to put it in the header of the code to get it working?
My code pasted below:
[Code] .....
I have made a spreadsheet but would love to be able to incorporate multiple 'Clear Data Buttons', (Macros)
that clear cell data.
I have attached several screen shots of my spreadsheet, with the URLs listed below.
(Images 1-6)
http://tinyurl.com/qba57l
http://tinyurl.com/od9upb
http://tinyurl.com/ovaeej
http://tinyurl.com/pctsvj
http://tinyurl.com/oc2qqm
http://tinyurl.com/qdhzge
Spreadsheet (xls & xlsm) in zip format
http://tinyurl.com/qczlap
It is a trading order sheet that I want to use, but also upload to a blog that I have just
started, relating to trading as a free download, hopefully it may benefit some users/visitors etc.
OK, regarding the macros.
I'm not quite sure how it is best to do it.
In total there are 13 'Clear Buttons.'
11 are 'CLEAR DATA' Buttons
12 is a 'Clear ONLY ORDER SHEET DATA' Button.
Finally 13 is a 'Clear All DATA!' Button
I think it's best if I give the cell location of where I would like the macro buttons located and what data they clear.
Clear DATA - Button 1 - (Is in Cell F3) - To Clear Data, Columns D,E,F & Rows 4 to 13)
Clear DATA - Button 2 - (Is in Cell N3) - To Clear Data, Columns G to O & Rows 4 to 13)
Clear DATA - Button 3 - (Is in Cell U3) - To Clear Data, Columns S,T & U & Rows 4 to 13)
Clear DATA - Button 4 - (Is in Cell F15) - To Clear Data, Columns D,E,F & Rows 16 to 25)
Clear DATA - Button 5 - (Is in Cell N15) - To Clear Data, Columns G To O & Rows 16 to 25)
Clear DATA - Button 6 - (Is in Cell U15) - To Clear Data, Columns S,T & U & Rows 16 to 25)................................
I have a worksheet (“A”) that is populated from a second sheet (“B”). The data on “A” changes as necessary using another Macro. Most of the data on sheet “B” is numeric and comes from various formulas and results in numbers with too may digits after the decimal point. I can format sheet “A” to turn 58.22222222 into 58.2 but when I run a Macro to clear the data I lose the formatting. I need to find a way to clear only the data and not the format, or find a way to add a mask on specific columns in the macro that copies and pastes. Here is the Macro to clear the data.
View 3 Replies View RelatedWhat i want to do is clear some data within a merged cell but leave the rest.
I have added a sample workbook. The data i want to clear is highlighted in Red so the 11111 will be replaced with ...... and the 09/12/09 will also be replaced with .......
I have a spreadsheet where I am tracking several entries in a table that will keep growing. Three fields are Data Validation Drop Down Lists. The macro below works well to clear the two lists to the right when the first one is changed by the user.
[Code] .....
I want this to affect the rows below it in the table as they are added.
I'm having a problem with a macro clearing a formula in a cell. I have the same type of cell that doesn't have the problem but I can't find the difference between the 2 cells or difference in vb that's making it happen. I have to intentionally cause this to happen but don't see why it's happening. Do I need to attach workbook and describe what's happening? I have been copying and pasting from different sources as well as paying to have it created/started but it was expensive(for me) and I make nothing off of it, just use it at work. I am not proficient in Excel or vb but I'm desperately trying to learn as I go so as not to fork out a few hundred dollars again.
here's atleast the vb for the macros:
VB:
Sub clearclientinfo() '
'
'
'
Sheet5.Select
[Code].....
For various reasons I need to copy a the range "a2:s251" in the sheet "FWD Input" to another sheet but I need to remove any formulas.
To do this I have used the
Sheets("FWD Input").Range("A2:S251").SpecialCells(xlCellTypeFormulas).ClearContents
This works fine if there are formulas in that range, however if there aren't it gives me: " Run time error: 1004 No cells were found"
So I think I need some code that counts the number of cells in the range with formulae in them and either goes ahead if there are some or quits if there aren't.
how to sort data pasted from word into specific columns e.g.
I paste: 1,2,3,4,8 into the ref row, and it poulates as such, leaving out the columns for which there is no corresponding value:
Competency: 1------2--------3-------4------5------6------7------8
Ref: -------WR1----WR1----WR1-----------WR5------------------WR1
=(SUMIF($J:$J, "Player1",$K:$K)+SUMIF($L:$L,"Player1",$M:$M)+SUMIF($N:$N,"Player1",$O:$O))-SUM($I:$I)
This looks up if Player 1 was in the top 3 scoring zones and adds up the players total score.
I have another column in this table of data labelled 'Number of Players'. I was wondering how to lookup the total score for this player in the games he played under 6 players for example and the games he played in where there were other six players.
I've tried using that formula ^^ with variations of IF and SUMIF formulas to try and figure it out, but I keep getting formula errors or it just returns with the total score, and not just with the total score under 6 players.
I am also trying to create a graph of date on the x axis against score to date on the y axis - everytime I try, the x axis is always numbers instead of the date?
adapting the bolded code to search for a specific row where the date displayed in "DAT2" (a date in Column A) occurs in the same row as specific data (e.g CEF1) in column B (note that there will only ever be one combination like this on the worksheet but it could occur in any Row) and then display just that result in "Experimental".
Private Sub CommandButton1_Click()
Unload Me
Dim CellFound As Range
Dim Rng As Range
Dim Wks As Worksheet
If TextBox1 = "" Then
MsgBox "You must enter a Date to Find."
Exit Sub
End If
[code]......
I need copy duplicate data to another sheet, but paste only column(1,2,4,5,6,13,14)
[Code] .....
Cross-Post : [URL] .....
i'm having a hard time with trying to populate data from a userform to a specific column under a specific sheet. I've attached the file if you want to look at it. The file is basically a exam type with user logging and auto score computing.
The file is made of 6 sheets, 1st sheet is the log-in page where takers are required to enter their ID number and last name. 3 sheets of dummy test items, an Admin sheet that computes the score per test item and Database which I'm trying to compile all data in one column.
What I'm trying to do is that when they enter their ID and Last Name and then answer the 3 tests, they will be recorded in the database sheet in 1 column containg their ID, name and all the test results so that checking,grading and identifying who took the test would be easy.
So far I think I've done the part for the scores but I can't seem to get the userform for emp# and last name to populate on the field marked in the database.
I have repetitive task of copying and pasting. Macro to sort some data.
I have time values (sorted in order) in Column A and a value in Column B.
Sheet1 Â AB1TimeValue
200:00:002300:00:002400:00:001500:00:002601:00:004701:00:002802:00:001902:00:0021002:00:0031102:00:0041202:00:0011302:00:002
I need separate the time each hour of data into columns. So the above would become
Sheet1 Â ABCDEF1TimeValueTimeValueTimeValue
200:00:00201:00:00402:00:001300:00:00201:00:00202:00:002400:00:001Â Â 02:00:003500:00:002Â Â 02:00:0046Â Â Â Â 02:00:0017Â Â Â Â 02:00:002
There are a different number of rows of data for each hour and sometimes there might not be any data for a specific hour.
I've been trying to create a formula that will take data with a specific status and put those in a list on a summary worksheet.
On my data worksheet I have two columns a category/ name column and a risk/status column, on my summary page I want to generate a list solely made up of names that have a specific status.
I've attached a sample.
I have a userform where the user will identify a record to delete. I need to search another worksheet (Month) for the event's name which is associated a date. Once it finds this event's name I need to clear the contents of that cell.
Here is the code I am using for the record deletion from the 'Data" worksheet. I need to also locate and clear the cell as stated above.
I need to start with a worksheet without any objects, namely pictures. Without knowing the name of the object, is there a way to clear all objects on a worksheet?
Second: on a different worksheet there are products with pictures with the product number. When a user selects the product number I want to copy that picture and copy it to J42 of the first sheet. My issue is positioning the picture.
I'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.
For instance, in Sheet1:
Chicken
Cow
Donkey
Pig
[Code]....
So the above table would be the result i'm aiming for.
NOTE, its not different workbooks. I'm looking for sheet to sheet macro.
I've attached a file as well if someone wants to have a go at it. There are no codes in it.
I'm trying to clear the data on columns Q thru AE on which ever row I am on.
View 3 Replies View Related
