I have a list of client information on a worksheet. Every client is under a certain "Exp. Code".
The team supports their clients by "Exp. Code".
I would like to create a macro to segregate this data according to worker on different worksheets. Each worker supports multiple Exp.
So I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
View 4 Replies View RelatedThe following URL has a great solution to this problem, I was unsuccessful in implementing it. Excel VBA: Create Worksheets for Each Item in an Excel Table of Data
Need
A macro to copy a pre-set sheet, we can call it a "template sheet", for each name in a pre-set range, a list. This list will have empty cells and names from F9 to F190. For each name i need it to copy the template sheet and place the sheet name within the new sheet. Should a user delete a sheet, activating the macro again should re-create the missing sheet and not just crash (was told there could be an issue).
I am trying to create a copy of the sheet "template" using a list of department numbers from the sheet "list". The following code works sometime but other times it stops without copying a sheet for all the names in the list.
Sub CreateNewSheets()
Dim NewSht As Worksheet, Crow As Integer, NewName As String
Dim c As Range, wks As Worksheet, TempName As String, BaseName As String
Application. ScreenUpdating = False
Set wks = Sheets("List") 'list of department numbers to be copied for a sheet.
I am copying info from a program into the "Input" worksheet - It is from my phone switch of logins and logouts of my employees. I have 11 supervisors and my end goal is to have each one of their coordinators show up in their specific tab automatically with all of their login information, ids, logins, and logouts. I can do the other math for the Marks and break lengths but I am having a hard time with this. I have been trying vlookup, but cannot figure out a way to bring all of the different rows... It only brings over one row.
I have tried to use some of the code from other posts on this sight, but have not had any luck.
What I am looking for it to do is on the Alis worksheet - the light blue sections. I am also finding it difficult in the light purple section also. I am trying to figure out how much time they were on the clock.
I have a master list of names on sheet 1 column A. I want to create a list of names on sheet 2 column A of the people from Sheet 1 column A that have a specific value (Y) in column z sheet 1. I might also want to different numeric values for the Z column
View 7 Replies View RelatedI need to make a Workbook that has hyperlinks in the first sheet that links to a cell in a second sheet and then back again. The only way I have been able to do this is manually create each link in each sheet. I am hoping that this process can be automated as they can not be 'filled' as far as I can see. find attached an example of what I am trying to achieve.
View 2 Replies View RelatedI need to create a macro that will scan a spreadsheet for the number of sheets and then pull data from the same places on each sheet in order to create a summary sheet. Let me try to explain a little better.
The spreadsheet I'm working with has a separate sheet for each new deal our company makes. Each of these sheets is in the same format - we use a template and fill in the data based on that whenever a new deal emerges. The sheets contain basic info about the deal in the first few rows and columns, then some narratives with dates describing the progress of the deal, and then a list of issues and whether or not they have been resolved. The problem is, each of these sheets contains too much info for a quick, high-level overview with the bosses so they've asked me to create something that will pull the basic info, the most recent narrative, and any unresolved issues from each sheet. This way, each time there's an overview scheduled with the bosses, the macro can be run and it will create a new sheet with data from each sheet in the workbook.
Create a macro to export 2 column to a new sheet.
I have attached the sample file, check for reference.
I want to export Month and Monthly percentage column to a new sheet..
Efficiency Report Fo TS.xlsx
I'm able to create a simple User form Drop-down list that references a cell range list. ( as a test for myself) I have 4 separate macros I would like to run individually. Rather than create 4 separate buttons, I'd like to be able to select each one via Drop-Down list.
View 4 Replies View RelatedEXAMPLE: Complete Sheet called "Day1". When day1 is complete you click on button and it then copies itself and creates and renames new sheet to "Day2", then when "Day2" is complete you click on button and it then copies itself and creates and renames new sheet to "Day3", and so on and so forth to "Day30".
View 9 Replies View RelatedI download a daily inventory file from my supplier.
.
I sell only selected products from that file.
.
I would like to use a list of the product part numbers of the products I sell on sheet 2 (Inventory) and have all the results from sheet 1 (ProductFeed) built into an expandable table on sheet two including all the parts numbers (expandable because I will add or delete part numbers from the list) I have listed and not just one part number but several.
.
Second issue: the download file contains part numbers in column "A" with variables like 418, 418_color, 418_size etc.... I would like all part numbers that begin with the number 418 and the ones that contain the variable added to be listed in the new table so I will get a list of all part number 418 and the variables which include 418 in them.
.
I want to return the results of the whole row(s) of the matched data as well in the new table.
.
I have attached a file of the working data that I have with the data I will use although the ProductFeed will change daily which I intend to copy and paste into the table each day.
I have a macro that would create a hyperlink for every one of the files in a folder that a specific cell gave the url address for.
Recently I got moved to a new pc and forgot to migrate my macro's over. In combing back through previous threads... I found the macro, but now it won't work.
[Code] ......
The error that I get is:
Compile error:
Invalid use of property
I get this error at row
Range (Cells(Rows.count, "U").End(xlUp).Offset(1, 0).Address)
Why did the macro used to work and not anymore?
In Excel I recorded a macro by carrying out some operations and then copied the code into VBA code window to the click event of a button expecting the code would operate well but in vain. What is wrong with my operations? By cliking command button placed on a userform I want to copy the date of one column to another and the data thus copied into another column should contain only unique value.
View 4 Replies View RelatedI need a Macro to create a unique, rolling data list. On Sheet 1, a report is pasted(from outside source) in cell A3(Rows 1 & 2 are headers) on a weekly basis. It is always the same amount of columns wide(138). The number of rows will always vary but will never be more than 500.
Here’s what I need for Sheet 2:
-Column A should be a copy from Column A on Sheet 1 (data is ITEMS)
-Column B should be a copy from Column BH on Sheet 1 (data is QUANTITY of items)
-Column C should be a copy from Column BI on Sheet 1 (data is PRICE of items)
Here’s the challenge (when the new report is pasted on Sheet 1):
-Sheet 1. Find new ITEMS not on Sheet 2 and paste them at the end of the report on Sheet 2 along with their QUANTITY and PRICE
-Sheet 1. Find any ITEMS already on Sheet 2, then update new QUANTITY and PRICE from Sheet 1 onto Sheet 2
-Sheet 2. Leave ITEMS alone that are now missing from the new report on Sheet 1
I want to create a Macro that will create a new worksheet when the user so desires using a message box.
The workbook contains 4 tabs, for example, named as follows: (1) template (2) 250 (3) 825 and (4) 975. I want the marco to work as follows:
1- Macro will ask user "please type store number"
2- Macro will then make of copy of "template" and create the new sheet
3- if user types in "860", I want to the macro to name the new sheet "860" and place the new worksheet between sheets 825 and 975.
Also - this may be asking too much but is it also possible to also prevent user from entering non-valid numbers? The valid numbers are 001 - 999. ie; if user enters "1500", return message "invalid entry".
This is what I'm trying to do:
1. When a user clicks on a Drop down box and selects "Add New", I would like a Macro to run
2. I want this Macro to open up a Dialog/Text box to say "Enter New Information" where the user can enter in some text
3. The text that is entered by the user into this box will be added as a new entry into the Drop down box selection
My VBA knowledge is still at a beginner's level and I know how to get a Macro to run based on a cell value. However I don't know how to create a Macro for the dialog box nor do I know how to create a Macro for updating the drop-down items.
I am after some code to create a new worksheet called 'xxxx' in my workbook, and then list all the sheets within the workbook (excluding the newly created 'xxxx' sheet.)
View 4 Replies View RelatedI am trying to create a Macro to pull from a list and then update the charts and print. I have a list that has over 100 clients. I believe I need to loop but I am not familiar with VBAs at all. Below is what I am trying to accomplish.
Sub Update()
'
' Update Macro
'
'
Selection.Copy
ActiveSheet.Next.Select
Range("B2").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Calculate
[Code] ......
I have a table where I have dropdown menu for selecting data and a vlookup for filling other fields.However, I would like to create totals at the bottom of the sheet. But I dont know how many rows I will need because the data to this sheet are added from another sheet in the workbook. I would like to create something like this :
No. Name Weight Amount Total Weight Unit Price Total Price
1. Product 30 2 60 100 200
then I will not have no. 2 , but add new record button that will create a new row and will copy the dropdown menu and the Vlookup function so the format will be the same for product no.2 as it is for the product no.1 ... thus I will not have any unfilled rows in the table and after the last row there will be a totals row that will sum up the whole table... How to do that "add new record button" so that in the table will show up only those rows, that are actually filled with data?
My problem is to create a macro that will list all folders, subfolders and files in an order in excel. So that I know which folders and files belong to which main folder, more like a hierarchy.
For example,
Sourcefolder
Subfolder 1
File1
I have code that list all files in folders and subfolders, but it does not put them in a hierarchy fashion.
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
category(workbookname)Items(sheets)
Vegetables carrot
vegetables brinjal
meat chicken
meat Fish
meat Mutton
grains Wheat
grains Rice
I am looking to create a macro to copy sheet Day(1) and call it Day(2). I would like Y3 to increase one day with the date, I would like Y4 to increase day and 1 and clear data from G35-G65.
View 4 Replies View RelatedI have a data set where the rows contain monthly sales data (from January to December) and the columns contain the names of employees (joe, bob, sue, etc.) and a single "group average" column:
I would like to create a chart for each employee showing the employee's monthly sales vs. group average. For example, the first chart would be for joe...
Then the next chart will be for bob and so forth...
Sheet1
Upon clicking any cell in Sheet1, it will automatically filter based on cell A and B.
Sheet2
Automaticall display filtered criteria based on double click from Sheet1
For example: when I double click on C1, on Sheet2 will automatically diplay filtered data based on A1 and B1 and same thing goes to if I double clik on C2 on Sheet2 will automatically diplay filtered data based on A1 and B2.
I have been trying to create a macro in excel to chart a selection of data and to output the chart on the active sheet where the data was taken (as opposed to a named sheet). So basically, I have about 300 worksheets with data, and I would like to have a button on each page that automatically charts that data when clicked, and outputs the chart to the page where the macro was clicked. However, I have not been able to figure out a relative reference that will allow me to make the LocationasObject reference simply the ActiveSheet as opposed to a specifically named sheet. See my code below, which references an output to a worksheet called "Charts". Right now, all of my charts are outputting to the sheet called "Charts", as opposed to the active sheet.
Sub ConsDiscChart()
ActiveCell.Offset(29, 11).Range("A1").Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlToLeft).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlUp).Select
Selection.End(xlDown).Select
ActiveCell.Offset(0, 1).Range("A1:B1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Offset(0, -1).Range("A1:C24").Select
Charts.Add
ActiveChart.ChartType = xlLineMarkers
ActiveChart.Location Where:=xlLocationAsObject, Name:="Charts"
With ActiveChart
.HasTitle = False
.Axes(xlCategory, xlPrimary).HasTitle = False
.Axes(xlValue, xlPrimary).HasTitle = False
End With
End Sub
Can I create data validation list of the names created in the name box or of the sheet tab names?
View 5 Replies View RelatedI am currently doing an excel database of students application. I want a macro that creates a duplicate of a template sheet and renaming it based on the name of the student. Meaning once a name appears in the name cell, a sheet of that particular name is automatically created. At the same time, i want all the data regarding the applying student to appear the newly created sheet as shown in the attached file.
View 4 Replies View RelatedI have the below VBA but am getting a 1004 error and when I step into each line I do not see the macro populating the cells as designed. The purpose of the macro is to take a list from the "EmployeeBillableHours" worksheet select the entire list s.tarting from row 2, then goto to "Client" worksheet, then starting at cell J6 paste each item on the list and then move 4 cells to the right and paste the next item on the list to the end.
Code:
Sub ClientListtoClientTab()
Dim lr As Long: lr = Worksheets("EmployeeBillableHours").Range("H" & Rows.Count).End(xlUp).Row
[Code].....
I am working on Excel document(Microsoft office-2007) with 2 sheets(Sheet1,Sheet2).
In sheet1 i have a dropdown list and the respective data is saved in Sheet2.On selection of dropdown lists in sheet1 ,respective rows should get copied from Sheet2 to Sheet1.
I am having trouble with the macro command. This is a first for me and I am stuck. I just dont know the how to write the Macro for this.