I have a master list of names on sheet 1 column A. I want to create a list of names on sheet 2 column A of the people from Sheet 1 column A that have a specific value (Y) in column z sheet 1. I might also want to different numeric values for the Z column
View 7 RepliesI have the following table with weeks to display for the holidays and my column H has a drop down list of the first column in the table below with the Named Range, "SNCODE.Season_Codes".
The other two Named Ranges are, "SNCODE.Season_Codes.Start" and "SNCODE.Season_Codes.End"
I need my column K to display a list of weeks from the first week to the last week. For example, the cell in column K for Valentine's Day should have 1, 2, 3, 4.
Basic 1 53
Promotional 1 53
Seasonal Spring 1 13
Seasonal Summer 10 26
Seasonal Fall 23 39
Seasonal Winter 36 53
Valentine's Day 1 4
Halloween 31 40
Christmas 36 48
Attempting to use INDIRECT function to create dependent data validation list (Type). The tricky part is that the drop down options are dependent on the values of two (2) cell values (Brand and Country).
I have used the INDIRECT function before but dependent on ONE cell value only.
Have attached an example to better explain.
Example.jpg‎
Example.xls
I need to create a 2-stage dependent drop down list.
Stage 1:
In cell G7 (on a tab called 'Data'), I have created a drop down list based on a range name called 'Region' .
Stage 2:
In cell G8, I need to create a drop down list which is dependent on the value chosen in G7.
Problem is, I will need to create a dynamic range name here which needs to vlookup or match the value from G7 in a dynamic list of data (the data is on different tab called 'RCA Data' and is spread over columns A:E with row A for headings - the data will go down an undetermined number of rows)
Every time the value in G7 matches a value in the 'RCA data' (the potential matches are stored in column
D) I need the corresponding cell value in column C to be added to the dynamic list. This list then needs to be available to choose from a drop down list in G8.
I'm using dependent drop-down lists. In the first box the user can choose a color which drives a set of options in the second box. (e.g. User selects "Red" and in the second dropdown they can then choose "Red A", "Red B", "Red C", etc.). Right now, if you select "Orange", it will still show "Red A" from the previous selection until the user selects the dropdown in the dependent box to refresh the list of options. Is there a way to make it so that second dropdown box will default to "Orange A"?
I tried writing some code to do this, but I can't seem to make it work. I've attached my file.
I have three individual lists and I am using a formula like this for each of them =OFFSET(Table1,MATCH(F15,Table1,0)-1,1,COUNTIF(Table1,F15),1)
for my final cell I need to create another data validation list which is depenant on the values selected in the previous three lists.. how I would alter the formula to allow me to do that? I tried using and after the match to match all three tables but it never worked
Situation:
I have two drop down lists 1) Country and 2) States/province
Country has list: [US, Canada]
If "US" is selected, [Arizona ,Florida, NewYork] is listed in the 2nd drop down list
If "Canada" is selected, [Alberta, Ontario, Quebec] is listed in the 2nd drop down list
Scenario:
First, I select "US" and choose the states to "Florida"
Next I change the country to "Canada" and forgot to choose province
Then, the 2nd dropdown list is changed to [Alberta, Ontario, Quebec],
BUT the current value is still "Florida"
Probem:
Now I have "Canada" and "Florida" selected in the sheet
Question:
If the primary list is changed, can I make the 2nd drop down list to show a default value (e.g. blank or the first entry i.e. Alberta)?
I'm trying to create a form where you can select names from a list dependant on what depot has been selected
On Sheet 1 along the first row are names of depots, under each of these are a list of names (number of name varies)
On Sheet 2, C2 is a data validation list, with source being =Sheet1!A4:E4
Is it possible to make C3 show a list of the names that's dependant on what's selected in C2
Is it possible to have a worksheet code that would underline a row if a certain value is selected in a dropdown list?
I have a worksheet with data populated across colums A to K, in Column I there is a dropdown list. What I wanted was to be able to understrike the Columns A to K of a particular row is the value in the dropdown list in Column I ="Cancelled". I cannot use Conditional Formatting as I have already used the maximum 3 formats for other features.
So I have a guest list workbook. There are two sheets. On the first one is a list of names on Column A. On Column B is a classification: 'C' if confirmed; "D" for declined; "I" for pending. I want to have all the names with "C" on sheet 1 appear on sheet 2 automatically.
View 4 Replies View RelatedI have a workbook with two sheets. The idea behind the workbook is an Interview Guide to be used just before an Interview. For now my problem is this.
Sheet 2 "Competencies" is just data. It stores competencies with their associated definitions and questions.
Sheet 1 "Control Page" is the sheet where the questions will eventually go. The user (Interviewer) will input data on the first two pages which will include name of candidate, date of interview etc. but they will also select 5 Competencies from the already existing drop down menus on page two. From there as the selections are made I wish for a code to copy the corresponding definition on sheet 'Competencies" to cells lower down in sheet "Control page".
I don't see a place to upload a file as I have a sample of the sheet ready to go.
I'm currently working with 3 dropdown lists depending on each other using data validation and =indirect(). I arranged them like in a top-down approach where you have a mother-list and child-lists (categories-->subCategories-->subCategoryCriteria). The user should easily chose first a category then a subCategory etc... This part works perfectly
My question is: when a user chose in the dropdown list e.g. a category, a subCategory and a subCategoryCriteria and he now maually deletes the value in the highest level, which is the Category (mother-list), all sub level values like subCategory and subCategoryCriteria will stay. It shouldn't be that way, because it's not logical. If you turn a tree upside-down (top-down approach) and cut one of the higher positioned trunks, all lower positioned trunks will fall off as well, right? So, my question is: can I use a conditional formatting or a formula to delete or fade out the value in the lower lists when the higher list value is being deleted?
I tried to use If-formula in combination with indirect in data validation, like =IF(A1="";("");INDIRECT(B1))...just and example.
The value doesnt need to be deleted, it could also be automatically face out like white on white or something. It's just confusing for the user if he deletes the highest choice and the lower choices still stay.
The following URL has a great solution to this problem, I was unsuccessful in implementing it. Excel VBA: Create Worksheets for Each Item in an Excel Table of Data
Need
A macro to copy a pre-set sheet, we can call it a "template sheet", for each name in a pre-set range, a list. This list will have empty cells and names from F9 to F190. For each name i need it to copy the template sheet and place the sheet name within the new sheet. Should a user delete a sheet, activating the macro again should re-create the missing sheet and not just crash (was told there could be an issue).
I am trying to create a copy of the sheet "template" using a list of department numbers from the sheet "list". The following code works sometime but other times it stops without copying a sheet for all the names in the list.
Sub CreateNewSheets()
Dim NewSht As Worksheet, Crow As Integer, NewName As String
Dim c As Range, wks As Worksheet, TempName As String, BaseName As String
Application. ScreenUpdating = False
Set wks = Sheets("List") 'list of department numbers to be copied for a sheet.
I am copying info from a program into the "Input" worksheet - It is from my phone switch of logins and logouts of my employees. I have 11 supervisors and my end goal is to have each one of their coordinators show up in their specific tab automatically with all of their login information, ids, logins, and logouts. I can do the other math for the Marks and break lengths but I am having a hard time with this. I have been trying vlookup, but cannot figure out a way to bring all of the different rows... It only brings over one row.
I have tried to use some of the code from other posts on this sight, but have not had any luck.
What I am looking for it to do is on the Alis worksheet - the light blue sections. I am also finding it difficult in the light purple section also. I am trying to figure out how much time they were on the clock.
I have a list of client information on a worksheet. Every client is under a certain "Exp. Code".
The team supports their clients by "Exp. Code".
I would like to create a macro to segregate this data according to worker on different worksheets. Each worker supports multiple Exp.
I need to make a Workbook that has hyperlinks in the first sheet that links to a cell in a second sheet and then back again. The only way I have been able to do this is manually create each link in each sheet. I am hoping that this process can be automated as they can not be 'filled' as far as I can see. find attached an example of what I am trying to achieve.
View 2 Replies View RelatedI need the drop down menu to update when the user adds a new entry. For example, if the user decides to add companies to the financial table, no matter how many new rows they add, our drop down menu at the top will update to include the new the entries. I want this to be the case in every table. How do I do this?
View 5 Replies View RelatedI download a daily inventory file from my supplier.
.
I sell only selected products from that file.
.
I would like to use a list of the product part numbers of the products I sell on sheet 2 (Inventory) and have all the results from sheet 1 (ProductFeed) built into an expandable table on sheet two including all the parts numbers (expandable because I will add or delete part numbers from the list) I have listed and not just one part number but several.
.
Second issue: the download file contains part numbers in column "A" with variables like 418, 418_color, 418_size etc.... I would like all part numbers that begin with the number 418 and the ones that contain the variable added to be listed in the new table so I will get a list of all part number 418 and the variables which include 418 in them.
.
I want to return the results of the whole row(s) of the matched data as well in the new table.
.
I have attached a file of the working data that I have with the data I will use although the ProductFeed will change daily which I intend to copy and paste into the table each day.
I have a workbook with a hidden sheet ("Template") and a visible sheet("New Job"). I need code so when cell F1 in "New Job" is populated:
1-the sheet is renamed to the value of F1,
2-a new tab is made (a carbon copy of the hidden sheet "Template")
3-the new tab is named "New Tab" and marked as unhidden.
Public Sub Worksheet_Change(ByVal Target As Range)
ActiveSheet.Name = Range("F1").Value
End Sub
Function WorksheetExists(SheetName As String, _
Optional WhichBook As Workbook) As Boolean
Dim WB As Workbook
Set WB = IIf(WhichBook Is Nothing, ThisWorkbook, WhichBook)
On Error Resume Next
WorksheetExists = CBool(Len(WB.Worksheets(SheetName).Name) > 0)
End Function..................
I want to create a spreadsheet, where one column allows the user to choose 'P' or 'C' from a list. No problem. I want the next column to contain options specific to what they choose. So if they choose 'C' they get a different list to choose from than if they would have chosen 'P'.
View 11 Replies View RelatedIs there a way to quickly create a list of all dependent cells?
View 9 Replies View RelatedI created a spreadsheet with a list of cities and attractions in those cities. I want an attraction drop-down menu (cell validation) to be dependent on the city that’s listed in the cell above it. I used the below formula: =INDIRECT(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE(SUBSTITUTE($H$1,"-","_"),", ","__"),". ","__")," ","_"))
This works fine on cities with a dash in them (McGhee-Tyson) or just a normal name (Washington, DC). However, I cannot get the attraction drop-down to work if I select a city with a period (St. Louis, MO) or a space (San Antonio, TX). Am I missing something in the formula? I attached a spreadsheet as an example. I use Excel 2007, but saved the spreadsheet in Excel 97 – 2003 format.
I have been having alot of trouble and have read alot. I can't seem to figure out the problem. I am currently working on an excel sheet that will select a name from the first drop down list. Based on that name five other list will be generated just on the first selection.
View 3 Replies View RelatedI am trying to have a drop down list which is dependant on the result of a cell.
For example, if cell A1= CAT, then cell A2 should have a 'drop down list 1'; if cell A1=DOG, cell A2 would have 'drop down list 2'; if cell A1=RABBIT, cell A2 would have 'drop down list 3' etc.
Creating the drop down list is easy, I just want to know if it's possible to have different drop down lists depending on the result of a cell.
Dependent Dropdowns from a Sorted List:
i have one file here..
how did they created validation here.
is there any macros?
i tried..but i didnt able creat like this.
i got this file in this link.
http://www.contextures.com/xlDataVal13.html
i saw this problem in this post..
http://www.excelforum.com/excel-prog...hierarchy.html
How to do a third dependent list with the last two list depending on the first. The con textures site does not explain this.
View 1 Replies View RelatedB2 should be drop-down list based on the value in B1.
Example: If Function code is 901, the drop down list should contains 3 values: Warehouse, Transport, QC only.
As we have ~100 function codes, formular with IF that I tried -> Data validation IF(B1="901",901,IF(B1="902",902 .... are not applicable.
I tried Excel Data Validation -- Dependent Lists but it didn't works.
My problem is a dependent drop down list that keeps the previous value when a different value is picked in the first drop down list. The dependent drop down needs to change to empty/blank.
The first drop down list is in cell C3.
The dependant drop down list is in cell C4.
The source in C4: =INDIRECT(VLOOKUP(C3,allnames,2,2))
I had a look at various answers on the internet but somehow cannot get it to work (and that is more of a reflection of my own skills than the writers of those answers!).
The only thread I could find on this topic was not resolved. I want to reset the value of a dependent drop down list (in H3) to the first valid choice when F3 is changed.
I have the following code that initially worked but no longer does.
Private Sub Worksheet_Change(ByVal Target As Range)
On Error Goto errHandler
Dim DLRng As Range
If Not Intersect(Target, Me.Range("F3")) Is Nothing Then
If Target.Count > 1 Then Exit Sub
Application.EnableEvents = False
Set DLRng = ActiveWorkbook.Names(Target.Value).RefersToRange
Me.Range("H3").Value = DLRng.Offset(0, 0).Value
End If
exitHandler:
Application.EnableEvents = True
Exit Sub
errHandler:
MsgBox "Could not change dependent cell"
Goto exitHandler
End Sub
I now get the error message ""Could not change dependent cell" every time I pick a different item in the drop down list in cell F3. If I remove the error handler I don't get the error and the code simply doesn't work.