I have a set of numbers (representing time), and I need a macro that will generate a split of these numbers that both have an equal sum (or as close to equal as possible). Also, everytime the macro is run, a different split should be created.
View 8 Replies
I have contarct for amount $5000 with a start date of 1/1/2014 - 3/31/2014 (3 months). I would like to equally split my amount based on my number of months between 1/1/2014 and 3/31/2014 ie $1666.66/per month.
View 4 Replies View RelatedI'm using a CALL Macro to split up a HUGE macro into different pieces:
Code:
Sub RSLDASHBOARDV2()
'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D.
'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D.
'Do Not Modify Code Unless Given Proper Privileges to do so.
Dim APPSPD As Worksheet
With Application
.ScreenUpdating = False
.Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code:
objField2.PivotItems( _
"TRC").Position = 1
objField.PivotItems( _
"MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code:
Sub STATSPIVOT()
'STATS PAGE BASED ON STATS DATA TAB
Sheets("STATS DATA").Select
Dim objTable As PivotTable, objField As PivotField
ActiveWorkbook.Sheets("STATS DATA").Select
Range("A1").Select
[code]...
if a certain cell does not equal zero i want a macro to run. But i'm having trouble getting the logic right. here's what i have so far
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Range("u82").Select
If Active.Selection 0 Then
Call unhide_addABBR
ElseIf Active.Select = 0 Then
Call hide_addABBR
end sub
I have a macro to insert a row and I would like it to be triggered by conditions in a IF statement or whatever is best? Macro has a ctrl+shortcut.
eg =IFa10=a12
do nothing
or run macro
I have a range B2:S47 that I would like a macro to copy and paste values not equal to zero in cells below the range starting from cell B49 so column values align. For example,
X78 0 0 G570 0 G990
Would give me the result,
X78 G570
G990
Using XL07
I have cells that they're values should be equal B6=B11, B7=B12, B8=B13, E6=B14, E7=B15, E8=B16, I want a macro that if the values are not equal then the background should be RED and a pop up message "The values should be equal".
View 9 Replies View RelatedI have file that may contain about 100 or more rows depending on the request. In column A, i have several names that is seperated by comma in ever row so basically what i want to do is to remove each name and insert a new column and paste the removed name in the new column and keep doing that until only one name is left for each row. I would like the code to check every row until the last row of the file and perform the splitting method that i have mentioned above. Pls. note that some row may contain only one name in this case we don't need to copy and insert new column but if the row contains more that one name then i would like to split it as shown below. I have attached file for details. I really appreciate for your help.
Here is an example of the current issue
Mike, David, John
Eric, Dave
Joe, Johnson, Edward, Ellen
Thompson, Adrienne.........
I have a excel sheet that contains about 8000 entries... I need to create a macro to help me. my file is like this:
123
RT4
eliott.billy
mark.garth
elena.david
I would like to split first name and last name. All the ligne that contains "." split it in 2. Example: eliott.billy will become eliott (column A) billy (column B)
I need to split a worksheet into new workshets in the same workbook using customer names in column D which includes subtotals. However, the macro i am using splits the customer name and customer subtotal into different sheets as the customer name now contains "total" so the macro doesn't recognize this is the same customer.
E.G
Customer name
Kwik Fit
Kwit Fit Subtotal
Mail Marketing
Mail Marketing Subtotal
I need the macro to split the above customer names so that the customer name including the subtotal gets split into a new worksheet AND the new worksheet is named after the customer name.
I am aware their are add ins for such tasks but i am using this at work and cannot install any files.
Code:
Sub Lapta()
Dim lastrow As Long, LastCol As Integer, i As Long, iStart As Long, iEnd As Long
Dim ws As Worksheet
[Code]......
Need a Macro to delete all rows containing values less than or equal 300 in column A
View 5 Replies View RelatedI want to split numbers in a cell. At the end of my report there is a text like this ;
Critical Path : 35-36-37-38-39-40-32-9-10-11-12-13-14-15 ;
Total Pressure Loss : 217.1
Pa text row changes in every report but it is always in a1 column is there any way to search critical path and split numbers in text.
My result should be : -35-36-37-38-39-40-32-9-10-11-12-13-14-15-
I need an easy code that searches all of column A and deletes the entire row if the cell has the value "-". It needs to find the last row of data using something like LastRow = Range("A" & Rows.Count).End(xlUp).Row
View 4 Replies View RelatedI'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors
Worksheets("Output").Range("K14").Formula = "Worksheets("Calcs").Range("D17")*worksheets("Calcs").Range("D17").Offset(10+T,0)"
When I record a macro it gives me this, but again, I need the last cell in terms of "T"
ActiveCell.FormulaR1C1 = "=Calcs!R[3]C[-7]*Calcs!R[14]C[-7]"
I'm having trouble with a small vba macro. At the end of the macro I test to see if two variables are equal and then print out true or false. However, for some reason even though the variables are equal vba is not treating them that way. I have put the values that represent the variables on a spreadsheet and used the if(x1=x2) formula and it says it is true, also, when I debug the macro and watch the values when it comes to test the logical expression the numbers are the same. I don't understand why vba does not say that the two variables are equal. I have attached a screenshot of the breakpoint where I double check the values are equal.
View 2 Replies View RelatedI'm using Excel 2000 and I have a spreadsheet with 4 columns (A-D) and many (500+) rows.
Part 1:
#########################################
Colums A & B both contain identical data - a first name and a last name in the format "John Doe".
I want the second word ("Doe") removed from all cells in Column A so that only the first name remains, and I want the first word ("John") to be removed from every cell in Column B so that only the last name remains.
So, where A1 & B1 both started with the data "John Doe" now A1 contains only "John" and B1 contains only "Doe".
#########################################
Part 2:
####################################################
Column C contains addresses in the format:
"#5 - 123 Fake Street, Some City, CA 90210"
There is ALWAYS a comma and a space after the street address, then the name of the city or town followed by more data which may include one or more commas.
I would like everything BEFORE the first comma to remain in column C, and everything AFTER the first comma & space to be moved into Column D of the same row. The first comma and space are not needed again.
So, where C1 started with "#5 - 123 Fake Street, Some City, CA 90210", it now only contains "#5 - 123 Fake Street" and D1 now contains "Some City, CA 90210".
####################################################
I usually copy ready macro from google. And I currently working on a check printing excel for my company to print check. I have googled and extract this macro from an author and place into my excel. But i run into a problem which is, the returned text will exceed the boundaries,
is there a way to spilt the text, lets say from after "dollars " to another appointed cell?
[Code].....
This is my input:
Col A
asde,dsfts-qwsa/001,asdasd-qwsa,asdas
etert,ttyutt-tww/013,dgdd-tww,dsfsaa
.
.
.
.
.
Col B
qwsa
tww
In Col C.. I want the output to be as
asde,asdas
etert,dsfsaa
Requirement as a text:
I need a macro that removes the value in column A based on the value in Col B.
The data that the macro removes is always between the "," (comma).
I have a large workbook with many worksheets which are all grouped into pairs - i.e. Sheet1 & Sheet2 go together, Sheet3 & Sheet4 go together; Sheet5 & Sheet6 go together, etc. etc.
I need a macro to divide this workbook into separate workbooks where each group of worksheets has a separate file of its own and I want to name the new workbooks after the second sheet in each group:
i.e. A new workbook for Sheet1 & Sheet2 called Sheet2.xls; a new workbook for Sheet3 & Sheet4 called Sheet4.xls; a new workbook for Sheet5 & Sheet6 called Sheet6.xls; etc. etc. etc.
I have a huge data which needs to be divided and distributed to team members. What i want to achieve is to split, thru macro/VB, the entries in my main file into several files, say by 50s. I attached files for reference. Whereas, the Dummy.xls is the main file and Book1 & Book2 are the desired output.
View 3 Replies View RelatedI have a macro below which splits the data in my workbook (Attached) into seperate workbooks on the basis of each change in data, and saves the new workbooks with the value available in column A. Everything else works perfectly with this code I just want the code to take the workbook name from Column B, not Column A as it is currently taking.
Sub Test()
Dim Sh As Worksheet
Dim Rng As Range
Dim c As Range
Dim List As New Collection
Dim Item As Variant
[Code] ......
I have a file, with this dummy data
Fruit Country QTy
Apple India 100
Apple USA 200
Orange India 150
Grapes Aus 100
Grapes India 100
I need to macro, wherby it will create 3 files namely apple, orange,grapes and store the relevant rows.
Hence I need a macro to split file into different files based on different values in a column and accordingly name it .
I have Column D containing multiple values that I need to split. The structure is:
Text Text (XYZ) 123 AB C
Text 456 C
Text Text (RST) 7 A CD EF
Text 22
I'd like is to split the cell using a macro rather than formulae so that the resulting cells can be filtered.
The output would be:
Text Text (XYZ)|123|AB|C
Text|456|C
Text Text (RST)|7|A|CD|EF
Text|22|
So the first split would need to be when the number is reached, the second split after the number and then subsequent splits each time a space is encountered (although there may not be any values after the number!).
My code below returns a type mismatch? It is looking at the values in column B which are formatted as text and the output is in column J. An example of a value is 2.1.15 I want to extract 1 (i.e. the central character between two ".").
VB:
Sub ConvertLineNo()
Dim r As Long, TempStr As String
For r = Cells(Rows.Count, "B").End(xlUp).Row To 1 Step -2
TempStr = Cells(r, "B")
TempStr = Split(TempStr, ".")
Cells(r, "J").Value = TempStr
Next
End Sub
I just want a macro to split the hours to a date and time in column A. I just preferred macro rather than a formula.
Ex: [Code] .......
Column B1 should be: [Code] ........
I've also attached the file : hours split.xlsm
I need a macro that can search text cells in column L for a space delimiter, then if the space is present, to split that cell into a row inserted below it, then copy the information in the rest of the row down. I'm not really up on my VBA.
I can assign a number of copies to print by adjusting ActiveWindow.SelectedSheets.PrintOut Copies:= , but what I want it to have the number of copies auto adjust to the value of a cell that contains a formula. I was hoping it would something as simple as Copies:=cell but no luck...
View 2 Replies View RelatedExcel VBA 2010.
I have this problem:
e.g Cells ""
C2 - 128.50 g
C3 - 211.01 g
C4 - 198.50 g
C5 - 179.34 g
I need to split the text into
Cell "C2" = 128.50 and Cell "D2" = g
Cell "C3" = 211.01 and Cell "D2" = g
and so forth
I wanted to avoid using delimited method with space and induce an automated method to format every cell of Column "C" one by one.
I am trying to divide a table of data (7 Columns, 500-1000'ish rows) into individual worksheets based on any unique values in column. There may be anywhere from 10-30 instances of the same value in Column C, and I need to bring all rows of each unique instance into a newly created worksheet to be labelled the same as the value in Column C.
The RAW data will be updated monthly by keeping a template file copying and pasting data, therefore I am hoping to have a "SORT" button with this Macro assigned to it. I have quickly thrown together a sample workbook with how the RAW DATA will be pasted into the file, with additional sheets showing how I would like the data split and organised.
Example: Column A has a mixture of letters and numbers. ie AU1234 or AU5678 Always the letters will be first, but not sure if 2 or 3 letters. Need to insert space between letters and numbers.
I have so far. " =(left(a2,2)) & " " & (mid(a2,3,(len(a2)-2))) " this works if all are only 2 letters...
Now. What I need to do is open a .csv (will do manually) then hit something like ctrl-alt-k to run macro.
Step 1: Insert a column next to A, check rows down and for however many rows, make above formula (include 2 or 3 letters) to insert space between letters and numbers, select the new column, copy, select column a and overwrite with the values from the new column. ie turn 'A2' from "AU1234" to "AU 1234" and 'A3' from "AU4567" to "AU 4567" .
Step 2: Column D has comma delimited fields. Column F also has comma delimited fields. both D and F will always have the same number of fields. D will be something like 1234,2345,3456 ------ in this case 3 fields but could be over 100 fields
F will be something like M0002456 (04P), M0002457 (05P), M1230477 (02A).
Need to split both D and G from row A2 simultaneously from comma fields to rows. copying all other data from row. and insert before the next set of data in what was previously A3 and (in this case *should* be moved down to A5 because of the 2 inserted lines from the 2 extra fields).
E.g.: Column A Row 2 "AU 1234" Column B Row 2 "data1" Column C Row 2 "data2" Column D Row2 "1234" Column E Row 2 "data3" Column F Row 2 "M0002456 (04P)"
Column A Row 3 "AU 1234" Column B Row 3 "data1" Column C Row 3 "data2" Column D Row 3 "2345" Column E Row 3 "data3" Column F Row 3 "M0002457 (05P)"
Column A Row 4 "AU 1234" Column B Row 4 "data1" Column C Row 4 "data2" Column D Row 4 "3456" Column E Row 4 "data3" Column F Row 4 "M1230477 (02A)"
Then carry on to next row which may have only one field and can be ignored/skipped to the next which may have 100 fields which will need to be split to rows and inserted...etc....
Step 3
Remove all the "space Bracket-data-Bracket" ie " (04P) from column F
