I have Column D containing multiple values that I need to split. The structure is:
Text Text (XYZ) 123 AB C
Text 456 C
Text Text (RST) 7 A CD EF
Text 22
I'd like is to split the cell using a macro rather than formulae so that the resulting cells can be filtered.
The output would be:
Text Text (XYZ)|123|AB|C
Text|456|C
Text Text (RST)|7|A|CD|EF
Text|22|
So the first split would need to be when the number is reached, the second split after the number and then subsequent splits each time a space is encountered (although there may not be any values after the number!).
I have 7 rows in the same column of type percentage. I'd like to turn the text of the highest valued cell red. How exactly is that done with contional formatting (vs. IF statements for each cell)?
I am receiving a new report from an external system. Unfortunate the system delivers many information within one cell, and it is not possible to reconfigure. These information are separate by a semi-colon or a semi-colon + space. separate the information in separate cells?
I was just not able to figure out how to write a macro for splitting the cell data into multiple rows with the other column values being duplicated. Just elaborating my problem, its like i have a column in which i have multiple values separted by a comma, So i need to divide all these values on basis of a comma and then copy this value to a new row below, along with the previous column values same for this new row. in my file cost center column is to be worked upon. Can this be done by a macro ?
how to read mutiple values from one cell. For example i want to have one cell for site visits, and there may be more than one. So i want to let the user enter more than one date seperated by a ",". Is there anyway of going about this?
I have a situation where I have source data formatted like this:
Document ID Document Name Author
[Code]....
What I would like to do is to get each author on a separate row. I am able to do that using Text to Columns using the carriage return and then doing a transpose. I've also seen some threads where VBA is used to accomplish similar. However where I am stuck at is getting everything else to drop down accordingly. I.e. with the data set above I'd like to get to:
I have a string of text in one cell on Sheet 1 (ie., A1, Sheet 1), here is a excerpt:
A-dec International Inc., A. Bellotti, A. DEPPELER S.A., etc ...
What I need to do is split the cell into separate rows, using the comma as a delimiter. I will be reading the cell from another sheet and need a formula that will provide me with
A1: A-dec International Inc. A2: A. Bellotti A3: A. DEPPELER S.A.
I usually copy ready macro from google. And I currently working on a check printing excel for my company to print check. I have googled and extract this macro from an author and place into my excel. But i run into a problem which is, the returned text will exceed the boundaries,
is there a way to spilt the text, lets say from after "dollars " to another appointed cell?
I'm trying to find a macro or conditional formatting rule that would automatically hide all rows where all cells from F to X columns in the row are '0', all I can see is how to hide it when zero appears in 1 or 2 cells only.
The spreadsheet has a drop down box, so each time when I select different item from a drop down list I wanted zeros to be hidden automatically.
The formula I'm using is: =VLOOKUP($B724,Sheet1!$A$2:$S$17120,6,FALSE)
The B column in the lookup value has been both TRIMmed and VALUEd. The column that would contain the matches in Sheet1 has also been TRIMmed and VALUEd. I've confirmed that if I manually search for my value in Sheet1 then I find the data I'm looking for, but I always get #NA when this is run.
I have successfully done other VLOOKUPs between different columns in these worksheets, but can't get this one working. Excel version is 2003 SP2 if that makes a difference.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I have a spreadsheet with about 300 products listed in column A. In row 1, I have 30 store listed across. This produces a grid of data with sales for the past 3 months. I would like to easily have a list of the product and store that had 0 sales. I have tried a combination of INDEX/MATCH as an array formula but can't get it to work.
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code: Sub RSLDASHBOARDV2() 'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D. 'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D. 'Do Not Modify Code Unless Given Proper Privileges to do so. Dim APPSPD As Worksheet With Application .ScreenUpdating = False .Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code: objField2.PivotItems( _ "TRC").Position = 1 objField.PivotItems( _ "MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code: Sub STATSPIVOT() 'STATS PAGE BASED ON STATS DATA TAB Sheets("STATS DATA").Select Dim objTable As PivotTable, objField As PivotField ActiveWorkbook.Sheets("STATS DATA").Select Range("A1").Select
I have and issue where I have name in one cell and need to separate them into 2 cells. Trouble is it is a combination of single names, husband and wife, and partners with different surnames. Sample of data is below:
Belinda Smith & Grant Jones Janine Ken & Marie Smith Louie & Betty Johnson Naomi Thomsoon & Craig Brown Narele & Barry Day Nicholas & Julie Smithson S M Bole & Co Jim Morris Danielle & JohnSimpson
This code splits a worksheet into multiple sheets (based on sales person in column A). But when it does it, it deletes the sheets and then re-creates them.
However this messes with my formulas I have linked to the split sheets and turns them into #REF! errors.
I would like to split a worksheet to multiple sheets based on a column header. On browsing through the forums I found the VBA code below.
My problem with is that the code automatically uses only the first column for spiliting into different sheets. But I would like to modify this so that it searches the first row for a matching header specified by me (Eg "Name" , which may be column 10)
Code: Private Sub PagesByDescription() Dim rRange As Range, rCell As Range[code]....
I have a worksheet that has data in columns A to N. The Salesman’s number is in column A and I need to split this first worksheet in to separate worksheets in the same workbook for each salesman.
The spreadsheet contains over 21,000 rows of data, and one of the columns (D I think) contains data as in the two examples below.
What she wants is to split this column at the semi-colons ( and have the column header as the "field" name.
Unfortunately not all the cells have the same number of "fields" as you can see. Some don't have an "addressLineTwo" while others also have "stateprovince".
Is it possible to split the column so each "field" goes into it's own column?
Please note that if a "field" is missing there is not two semi-colons to indicate an empty field. I'm also fairly certain that, between them the two examples below show all possible fields.
Data Examples.
addressLineOne:Road Belen Staana;addressLineTwo:Costado Oeste;city:SAN ANTONIO DE BELEN;highRate:194;latitude:9.97631;longitude:-84.20038;postal4005
Didn't there used to be a "Split" function that split text over two cells? I'm sure I used it years ago, but can't find any mention of it in Excel 2003.
I'm attempting to take a Workbook that contains 1000 Worksheets and split it into 2 separate WB's of 500 WS's each ... basically half it. This could also apply to a WB that contains less than 1000 WS's, but it is highly unlikely it will ever contain more than 1000 WS's.
I'd like each new WB created to be saved in the original path with the original filename followed by a "1", "2", "3" or "a", "b", "c", etc. For example: Original Filename = ImpactAnalysis.xls New Filename 1 = ImpactAnalysis (1).xls or ImpactAnalysis (a).xls New Filename 2 = ImpactAnalysis (2).xls or ImpactAnalysis (b).xls
I've located 2 modules in the forum that are a good start, but each creates a separate WB for each WS, which is a bit cumbersome with up to 1000 WS's in the original WB.
Sub splittest() Dim sht As Worksheet Dim w As Worksheet Application. ScreenUpdating = False Application.DisplayAlerts = False For Each sht In Worksheets Set neww = Workbooks.Add sht.Copy neww.Worksheets(1) With neww .....................
Here's my problem. I have a cell where there are many data strings seperated by ",". Each data string has a seperate value of its own like for e.g: A2: aa,ab,ac
String Value aa 1 ab 1 ac 3
What I want it accomplish is that, split the A2 cell into the different data string entities seperated by ",", then get the corresponding value of each of the data string entity, and to take the average of all the values of the different data string entities.
