I am looking for a macro to replace the values in a range of cells with a specific array for each column heading
Here is what I have
Temp1
Temp2
Temp3
0
0
0
1
1
50
[Code] ....
And here is the expected result of the macro
Temp1
Temp2
Temp3
no
false
min
[Code] ........
Please note there is only one Active Sheet.
Copy paste specific column with specific heading using macros. Roll No
Name
1
John
2
Abdul
3
Baig
1
I Want the Macro to find the column with heading "Name"
2
Copy the list from Name till the last Cell that is B1048576
3
Paste in Sheet2 Cell A1(Please see result in Sheet2)
code to find/replace the letters: "A" with "Active", "P" with "Contract", and "C" with "Settled sale", all in column "Q".
View 2 Replies View RelatedIs there a formula to isolate observations in the same column (different values) and also all have the same column heading like the file attached?
View 2 Replies View RelatedHow to get the Column Alphabet based on the Data it contains or the Column Heading using VBA?
Is it possible to get the Column Alphabet using any Macro or any function that within a Module it can always take the New Column Name during Execution..
Example: I have certain Columns where I have Yes and No Tick using the Wingdings P and Y..
Now these Columns are alternately Placed and there are six columns in all and they are spread over 12 Columns as the Alternate COlumns is reserved for Manual Entries.
Now I intend to increase the Manual Entry Columns but the problem is that every time I do that I need to make changes in my VBA Code.
Is it possible that even when the Columns are Inserted or Deleted in between before or after these columns I dont need to change the Explicit references by changing some approach.
I am not fuly conversant in VBA but use it whenever things are not completely feasible with Formulas AFTER GOOGLING.
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Target, Range("X3:X13")) Is Nothing Then ' You can Change the range here
Cancel = True
[Code]....
As you can see the Ranges are Alternately Placed and there are about 6 such Columns with the above TICKS..
Now, how do I keep it FLoating so that even after changing the COlumn Location it does not need to get Updated i.e. X and Z Column Alphabets..
I am trying to move info from an unformatted sheet to a sheet ready to import into a program. I need to look at the source sheet and if a column heading matches the heading on the destination sheet I need it to move the entire column to the destination sheet.
View 3 Replies View RelatedI want to replace all blank cells in column A with the word "BLANK" but my problem is that I need to tell Excel to stop searching for blank cells in column A once and only once column A is equal to the last data row in the column named "Product Number". I tried this macro but, naturally, it replaces all the empty cells in the WHOLE COLUMN.
I will always have a header column in row 1. The data is below that (data will always start at row 2).
Columns("A:A").Select
Selection.Replace What:="", Replacement:="BLANK", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
How can I change this so that the find/replace macro searches all the way down equal to the last data row in the "Product Number" column?
Below are 2 examples. Example 1 is pre macro and example 2 is post macro.
...............................
Pls help me do a macro that upon clicking a button it will copy and paste a column heading (located in Row1 of Sheet1) to all non-empty worksheets (Sheet 2 to Sheet N) in the workbook simultaneously. Note that each worksheet has no column heading and has the same number of columns as that of the column header in Sheet1. Worksheet 2 to Worksheet N contains data extracted daily.
View 7 Replies View Relatedi want a macro to search all of column A in multiple sheets for a date that has been put into an input box.
the matching dates have data corresponding to them in that row. i want the date and data from the row to then be copied into a new sheet.
I am using excel 2007. I have a worksheet with a list of words I wish to step through this list replacing the selected words in another workbook with nothing (ie deleting them).
I have the following code
Code:
Sub replacewords()
Dim MyWord As String
Dim wbLibrary As Workbook
Dim wbWorking As Workbook
Dim myExcelColumns As Integer
Dim myExcelRows As Integer
Dim MyRow As Integer
Dim MyRange As Range
[code].....
It does not seem to evaluate "myRange";
I have written a macro to convert data from a report exported from Salesforce.com to a format that is acceptable for upload to our website. One of the necessary conversions is to convert values from a Boolean value to a Y/N value. I wrote a macro with a series of search-replace commands such as this:
Code:
'replace 0s and 1s in "Direct Billing" column with appropriate data
Columns("R:R").Select
Selection.Replace What:="0", Replacement:="N", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
This code generates a warning when no "0" values are found:
"Microsoft Office Excel cannot find any data to replace. Check if your search formatting and criteria are defined correctly. If you are sure that matching data exists in this workbook, it may be on a protected sheet. Excel cannot replace data on a protected worksheet."
So I was given the task to translate some procedure instructions in an Excel file from English to Spanish. These are very simple instructions and in most cases repetitive throughout the document. There are a lot of instances where the instructions are the same except for a #. They are meant to be modified within the cell as the text that appears in the cell will be printed exactly as it appears.There are several instructions in the cell, it is basically a long continuous string in the cell. My idea is to create a macro that can search that range of cells for the instruction, replace it with the Spanish equivalent while leaving the original English instruction in the cell.
View 6 Replies View RelatedIm am trying to create a search marco button that allows me to search in multiple worksheets in one work book. I came across this CODE the first part of it works. It pops open user input box and ask for the word that i would like to search but the this error message pops up Runtime error1004 Method 'range" of object'_Global'failed and i dont know what to do
Private Sub SearchButton_Click()
SearchString = InputBox("Enter Search String", "Search")
If SearchString = "" Then Exit Sub
For Each c In Range(myRange)
If InStr(LCase(CStr(c)), LCase(SearchString)) Then
[Code]....
In a large spreadsheet that receives external data, I have codes (U, N or V) allocated at various times to different rows as shown in sample worksheet attached. Elsewhere in the spreadsheet, I need to display (for later export) these codes along with their respective number in a sorted list. Please review the attached:
In the spreadsheet you'll see a column of codes, the next column is the data reference number, then to the right is three columns, one for each code. As displayed in the sample book attached, each Code column is to display the data reference number (from column 2)that matches that column's code.
What formula can I use to list these numbers in the appropriate columns?
I have values in row A and I have values in row C. I want to create a loop to look up xxx and replace it with the values consecutively in row C. Look at example for a better Idea. I found a way to find and replace, but I not sure how to use it with qoutes. I was thinking maybe I dont even need row A and just supply a list and excel could have the chunk of data in the code itself.
View 2 Replies View RelatedI have taken over this spreadsheet for my work, and it is basically a statement in excel. What I want to do is find a list of invoice numbers in column B populated from a remittance, and then replace column F to say a specific thing depending on check number and date paying for that invoice. So if a check printed today I would have it replace column f to say paid 1/31/13 check # xxxxx. Currently I am searching for each invoice indivudually and then replacing with check number and date. There are about 200 invoices per month that I deal with, and it is a big waste of time!
For example from this
invoice #1 / reconciled (DATE)
invoice #2 / reconciled (DATE)
To this:
invoice #1 / paid (DATE) check # (xxxxx)
invoice #2 / paid (DATE) check # (xxxxx)
I would like to have a macro that will hide a column based on the value in the row. I have multiple sheets and if row 4 (or more specific, B4:AL4) contains a zero, then I'd like the whole column to be hidden on that sheet. I'd like to be able to run the macro and it evaluate every worksheet.
View 5 Replies View RelatedI have an email list that I email. Sometimes I get some that doesnt exist anymore. So my program sends email out and respnods to me that says these emails do not exist and gives me the emails. So I manually have to go and find them one at a time on my list to delete by CTRL F. Is there a way to submit all email names to find at once instead of doing one at a time.
View 9 Replies View RelatedI have over 16000 cells with different information in them, each cell is unique. There are parts of these cells that have similar information.
I am looking to search part of the cell, and replace the whole cell with my new description, so I can run pivot tables on it.
I have two worksheets in same workbook.
Sheet1 on columnA contains my data.
Sheet2 on columnA contains the entries I am going to find on Sheet1 colA
columnB contains the entries I am going to replace with
I am currently working with these code but seems I cant make it work:
[Code] .........
I am trying to work out how to nest offset in a code using search replace. The goal is to find a value from cell A1 (example) and replace the values in the cells next to the cell containing samuel and the cell containing samuel.
A sort of search and remove data tool if you like So for example:
[QUOTE]A1: "samuel" (the search criteria)
Search range is: B1:D400
(for example)
Cell B40 = samuel
C40 = Driver
D40 = year
So, the macro is activated and finds "samuel" in B40 and I would like C40 & D40 replaced with "" The code I'm using is below: (this is just replacing the cell containing the search criteria with "test". I would like to nest offset(0,2) & offset(0,3).Value = ""
Sub Macro1()
Range("B1:D400").Select
Selection.Replace What:=Sheets("Sheet1").Range("A1").Value, Replacement:="test", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
I have an array 20 Rows x 42 Columns, which contains a competition draw.
I need to search this array for a unique value and return whatever the time is in the first column on the same row as the value appears, and enter it into column C in the Womens Times sheet.
I also want to return into column D the court number from row 3.
The reason i want this automated is as teams enter / withdraw we may need to drag the games from court to court to fill gaps, so i want the Womens Times sheet to update accordingly.
I have been messing around with index and match, but cannot quite get it to return what i need.
I have attached an example ... on the sheet "Womens Times" in column A there is a list of game numbers ( #1W etc etc) indicating womens game #1 and so on. The main sheet i am using also has a seperate tab for the mens games, hence the designator of W or M on the end of the game number.
I have a datasheet, in which i would like to replace data...
for example, A1 has value of 'a.Male' , A2 has value of 'a.Baby'
and the list goes on...
What i want to do is, find all 'a.'s and replace the whole cell with '1' ...
So after replacing the cells A1 and A2 will be '1' instead of 'a.Male' / 'a.Baby'
If this is any help, i posted somethin i wrote... but it has to be repeated many times... i have a large data set.... I need somethin that will do the job with a single press of a button~
Sub Replace()
'
' Replace Macro
' Macro recorded 2006-11-30 by Jae Heon Choi
'
' Keyboard Shortcut: Ctrl+r
'
Cells.Find(What:="a.", After:=ActiveCell, LookIn:=xlFormulas, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, MatchByte:=False, SearchFormat:=False).Activate
I have a long list of items in one column, with parameters that are all split by an underscore.
However, in some instances, some of the text that is separated by an underscore needs to be joined together.
So for instance I'll have;
This_is_a_very_good_thing
This_is_a_perfect_thing
Where I want the result to be that "good_thing" becomes "good-thing" and "perfect_thing" becomes "perfect-thing".
How can I get this done with a Macro, instead of constantly doing a Vlookup to change this instances.
I want a marco that can "find & replace" in a column, let's say K. Let's just say I want to find "AAA" and replace "BBB" and "CCC" and replace "DDD", I just need the code so I can change it myself. It will be more than 40+ replacement.
View 9 Replies View RelatedAfter much fretting over this (and many other Excel issues), I've decided to seek out some assistance. I've included an example with columns, because I'm not very fluent in Excel terminology.
View 5 Replies View RelatedI have a 2 groups of column headings with a different month and year in each heading so
1st Group of columns range
Columns AJ through AX
Column Heading example "Expense Ratio February 2013......next Column over is "Expense Ratio March 2013"
2nd Group of columns range AY though CE
Column Heading example "Capital Balance February 2013......next Column over is "Capital Balance March 2013"
Each new month I need to add a new Expense Ratio column after the most recent expense ratio Column. (i.e. Find "Expense Ratio March 2013" and I need to add a column after that with heading "Expense Ratio April 2013"
Same thing for Capital Balance - add a new Capital Balance column after the most recent Capital Balance Column. (i.e. Find "Capital Balance March 2013" and I need to add a column after that for "Expense Ratio April 2013"
Because the ranges keep changing month over month, how do i do this.
I have a excel which contains 5 columns in which 5th column data cells has to be replaced with another set of data which have relationship with other 4 columns data.
View 3 Replies View RelatedAn example of my data is:
Column A Column B Column C
ABC DEF Answer 1
ABC GHI Answer 2
ABC JKL Answer 3
I need a formula that checks both column A for text (ABC) and column B for text (JKL, two different criteria) and give 'Answer 3'. There will a lot of data and it will not always be the bottom answer.
The yellow highlighted column F (each Reason) in the sheet2 to be placed as main header in the next column and so on as seen in the sheet 3
If they have two similar item number with 2 different reasons - delete the duplicate item number and place the number in each column according to its reason as seen on row 16 on the sheet3
If they have two number with similar reason - just sum up the number
sample excel 2.xlsx
