I am trying to move info from an unformatted sheet to a sheet ready to import into a program. I need to look at the source sheet and if a column heading matches the heading on the destination sheet I need it to move the entire column to the destination sheet.
View 3 Replies
I m trying to match the values based on the Coulumn B
[IMG][URL]....
;base64,iVBORw0KGgoAAAANSUhEUgAABVYAAALYCAIAAAAYRj5jAAAgAElEQVR4nMy9Z1RU+Z73Oy/uWs9aM
/eZmTtzn5nT3doGoNLOu3KmCEXOQUURUcCAomIgmXOgDYCK5JyhcoQiQ5HNWcE2dNt9uo8dTve
ZM3PCfbF3RYJo95m5rs+qVb0bpMoO8P3s7+/3/zvrwYOL5cCB4dnk5bmTm2tnKCeHYDAnZzA7m2AgK2tg
/347/fv29e/b1793bx
[Code]...
Basically Column O has data that need to be moved to the different worksheet in one workbook.
so If Column O=Bad Number in any row in Column O move to sheet1 or If Column O=Good Number in any row in Column O move to sheet 2 etc.
I have a DATA sheet that is all of the information reported on a monthly basis. This format will never change, but the data will. I have a second sheet called MMUSAGE.
On the MMUSAGE tab, I have identified which headers (in red) from the DATA tab that correspond with the headers in the MMUSAGE tab. Question is: how do I move the data from the DATA tab over to the MMUSAGE tab under the appropriate headers?
Example: IF Product Number on Worksheet(DATA) = Product Code on Worksheet(MMUSAGE) then move all data to Column L.
How to get the Column Alphabet based on the Data it contains or the Column Heading using VBA?
Is it possible to get the Column Alphabet using any Macro or any function that within a Module it can always take the New Column Name during Execution..
Example: I have certain Columns where I have Yes and No Tick using the Wingdings P and Y..
Now these Columns are alternately Placed and there are six columns in all and they are spread over 12 Columns as the Alternate COlumns is reserved for Manual Entries.
Now I intend to increase the Manual Entry Columns but the problem is that every time I do that I need to make changes in my VBA Code.
Is it possible that even when the Columns are Inserted or Deleted in between before or after these columns I dont need to change the Explicit references by changing some approach.
I am not fuly conversant in VBA but use it whenever things are not completely feasible with Formulas AFTER GOOGLING.
Code:
Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Range, Cancel As Boolean)
If Not Intersect(Target, Range("X3:X13")) Is Nothing Then ' You can Change the range here
Cancel = True
[Code]....
As you can see the Ranges are Alternately Placed and there are about 6 such Columns with the above TICKS..
Now, how do I keep it FLoating so that even after changing the COlumn Location it does not need to get Updated i.e. X and Z Column Alphabets..
I am looking for a macro to replace the values in a range of cells with a specific array for each column heading
Here is what I have
Temp1
Temp2
Temp3
0
0
0
1
1
50
[Code] ....
And here is the expected result of the macro
Temp1
Temp2
Temp3
no
false
min
[Code] ........
Please note there is only one Active Sheet.
I have a Meeting Place and Cities Table(too large).An example attached as a file and explained waht is wanted.
View 2 Replies View RelatedI have to write a macro that will copy the values of 'Items' in 'worksheet 2' to 'Items' in 'worksheet 1' ONLY when the 'Title' value is matching in both worksheets AND the value of ' Heading' in worksheet 2 is 'Entry1'.
Example:
Worksheet 1:
Title |Items
David
Bill
John
Worksheet 2:
Title |Items |Heading
David |A, B, C |Entry1
David |A, B |Entry2
Bill |A, B, C |Entry1
Bill |A, B, D |Entry2
John |G, H, J |Entry1
Gerry |G, H, R |Entry1
From the above data, I want the macro to compare 'Worksheet 1' with 'Worksheet 2' and only copy the 'Items' that have a matching 'Title' AND a 'Heading 1' value of 'Entry1'
So the final result should be:
Worksheet 1:
Title |Items
David |A, B, C
Bill |A, B, C
John |G, H, J
I have seen examples of compare used but not sure how to apply it to my case.
I have two different Excel reports and the data needs to be copied from each column on one spreadsheet and pasted to the bottom of the equivalent column on the other spreadsheet.
So, is it possible to get a macro that will copy the data from one column then paste it to the next free cell in the column on the other spreadsheet.
If I could get some code to do one column then this should be enough to get me started and I could apply this to the other columns I need to copy.
I am in need of restructuring a spreadsheet of addresses for mailing purposes. (I tried to find something similar answered previously, but nothing seemed to work for me.)
I have attached a small example spreadsheet below, but our spreadsheets can be hundreds or thousands of rows in length.
I need a macro that will look for the "PO Box" addresses under the column headers named "ADDRESS2" and "ADDRESS3".
The PO Box addresses will need to be moved under the column header "ADDRESS1" within the same row.
It will need to overwrite the text that is already under "ADDRESS1" and delete the text from the "ADDRESS2" and "ADDRESS3" columns - UNLESS the text in 'ADDRESS2" is a PO Box AND "ADDRESS1" begins with "c/o".
If the data in "ADDRESS2" or "ADDRESS3" is anything other than a PO Box it will remain the same. As will "ADDRESS 1".
Basically if there is a PO Box it needs to be in the column named "ADDRESS1" and overwrite anything else that was there. The exception will be for PO Boxes that are in c/o someone else, the PO Box will then need to be listed in the column directly after the column that has c/o.
If the c/o exception will be too difficult the code could just highlight those scenarios and we could fix them manually. We usually do not have a lot of them, but enough that we need to be mindful of them.
The different scenarios are listed in my sample spreadsheet.Also, the code will have to use the column header names in row 1 because those headers are not always in the same column.
I am trying to move a column of numbers based on the information in another column. I've been looking for about a week and find macros that are close but not quite.
In one column it reads Mobile, Home, or is blank. If the number is a Mobile (column R), the area code (column P) needs to move to column S and the phone (column Q) needs to move to column T and the primary phone (column R) needs to move to column U. Home and blank cells remain as they are.
area (P)
phone (Q)
primary phone (R)
col S
col T
col U
[code]....
I have a large document with a lot of names listed. I want to make up new sheets for each person listed. Is there a formula that I can enter that will move the entire row based on the person's name? See attached.
View 3 Replies View RelatedI need write a VBA code that will move an entire row into a new sheet if the value of the last cell says "YES" If the value is blank then Id like it to stay in the current sheet. I would also like it if the cell wont allow any other value other than Yes to be typed.
I found this code here:
Copy, Move and Delete Row, based on Cell Value
THE VERY FIRST CODE REPLIED IN THAT THREAD.
I just cannot seem to get it to work. Simply copying and pasting that into the module doesn't work. I am not very good at VBA and just started taking a course on VBA. Id like to jump into this problem asap as I need it for work.
Basically:
Columns A:E will have values. In Column E I would like to type in Yes if completed. I would like the Macro to run through all of Column E and if the cell value is "YES" then I want it to cut the entire row and paste into a new sheet. In the new sheet I would like it to be pasted into the next available row.
Also can I create this with a ActiveX control button? I would like to have a button that I can click at the end of my work which will run the Macro in sheet 1.
I want to do is copy all rows from the worksheet DATA based on column G (Date) and copy it to a new sheet based on the date (all 2003 on the 2003 sheet and all 2004 on 2004 sheet.....).
I have already created the new sheets including headers minus data. I would like to have all the data moved except the last to Columns AW & AX. I have two hidden sheets in this workbook. Would it be possible to have it auto-populate future entries from the "DATA" worksheet to autofill onto the new sheets?
Just noticed that I titled the Thread with Move but what I am asking for is copy. I cannot change the Thread title.
I have a spreadsheet in which the user will respond to questions using "T" for "True" or "F" for "False". If there is a certain number of T's I would like the macro to take the user to one sheet in the workbook or if there are a certain number of F's I'd like it to take the user to another sheet in the workbook.
View 2 Replies View RelatedI have a set of sheets on a workbook that contain addresses, which are all combined on the first sheet (as you can see in the attached file). I would like to use a formula to compare the addresses on the Main sheet with the other sheets, then return in the D column of Main a colored cell indicating on which sheet the address was found on; different colors for different sheets. I tried to figure out some conditional formatting, but to no avail. Also, on occasion I have spreadsheets with 5 or 6 sheets containing these mixed addresses. Is there a solution that won't be limited to just a few sheets for comparison?
Excel Help.xlsx
I have two sheets:
1. Not yet printed
2. Printed
My data is in sheet 1 (Not yet printed). I would like to move automatically entiry rows (sometimes more then one) to sheet 2 (Printed) based on one cell's value. Here is a screenshot:
For example when I enter into Sheet 2 '264450' then row 2 would have been moved to Sheet 2.
And also with multiple rows, if I enter '264461' then row 4 and row 6 would have been moved to sheet 2 as well. I wouldn't like to enter a value more than once.
I have had several intro programming classes, but not with visual basic. I've noted the problem lines with comments below. The problems are probably very easy syntax error.
Sub list()
Dim counter As Integer
Dim counter2 As Integer
Dim id As Double
Dim id2 As Double
Dim palletnum As Integer
ActiveSheet. Name = "Pallet Detail"
Sheets.Add
ActiveSheet.Name = "Pallet Summary"
Sheets("Pallet Detail").Select
Code:
Private Sub GetColData()
Dim SrchRng As Range
Dim SrchVal As Range
[Code]...
And it is also possible by using Column Number to retrieve the data SrchTxt, which is in a cell in the Row, in which "Roy" is found. This Row in this example is Row 5. Column Number may be anything within the search Range. Column Number is 3 in this example.
In Sheet1 "Poet" is in C1. (SrchTxt)
How to retrieve data of the cell in Row 1 in the column where "Roy" is found?
I have a excel file Sheet 1 is active data Sheet 2 is complete data, How can I make the column move automatic from one sheet to another with out cut/pasting?
View 1 Replies View RelatedI have a sheet called 'TimeRecorded' which will contain lots of rows of data.
If a row contains 'invoice' in column H, then the data in that row, preferably as far as column H, should be moved to the next blank row in a sheet called 'Archived'.
I would like the macro to move every row that contains 'Invoice' in column H to be moved.
i'm trying to create a macro to find any value <> "" from COLUMN B then copy Bx;Cx;Dx and paste into another worksheet with the name of COLUMN A.
And when the cells Cx or Dx is empty should appear 0 into the other worksheet
for example.
sheet1 ..... cell("dx") is empty
a b c d
w 5 3
the macro would copy 5,3,0 and paste into sheet named "w".
i found this code on internet but it's not quite good for me because it copies the hole row. i tried everything to change that but i couldn't.
[url]
(ORIGINAL CODE)
Sub SearchForString()
Dim LSearchRow As Integer
Dim LCopyToRow As Integer
Having a bit of trouble trying to get excel to pick up text in one sheet (sheet 2) and populate cells in another (sheet 1) if the row (row 1) labels and columns (column a) in both sheets match. hope that makes sense? I've tried googling this to no avail, i've also tried index-match however i keep getting errors.
View 3 Replies View RelatedI'd like a formula that'll return the column header by matching a lookup value with a table in the second sheet.
eg: sheet 1
Name
Cell
Region
John
111-2222
[Code] .......
The formula should match the name in A2, John, with value from the table in sheet 2 and return the correct region, this case North.
Copy rows from one Sheet to another based on a separate cell value But specifically, I am trying to copy row values from Columns C through column Z in Worksheet 1 of file POHeader.xlsx to row values Columns N through AK in file POReceiv.xlsx when the (Purchase Order #) values in Column A of each file match.
The reason is behind this is - one file has the unique Purchase Order number as the key without associated parts and the other file has the associated part number as the key with purchase order number attached.
I don't know whether I need to use VBA or if I can just use an index and match function.
Here is the situation:
There is a spreadsheet that I use that has multiple plans in one column for various members. You can see the plan for Robert James and Amanda James is plan 5. If all this information was in column A how would you move the plan type say column C for each member?
For example
Column A
Customer Name
Robert James
Amanda James
Plan 5
Nikki Martinez
James Gross
Plan 6
I have a excel file to keep track of sales pipeline. What I am looking for, is an automated utility or code that will allow excel to automatically move entire rows once a task is completed and can be moved to another sheet. In Prospect sheet I have a column for " sales stage" and here you have to select from a drop down menu, either "Prospect", "semi-qualifed" "Pre-qualified" "verbal" "closed-won" and Lost. What I would like, is that once you have selected one of the sales stage, the entire row or entry, will be automatically moved to a new sheet according to each stage.
View 9 Replies View RelatedI've got 3 pairs of columns and I need to sort through them and align the cells in columns E&F with those in A&B and C&D. The cells I need to match up are the times (columns A, C and E)
Example - convert this:
A...............................B..........C...............................D.........E...............................F......
BID TIME.....................BID.......ASK TIME....................ASK......TRADE TIME................TRADE
30/07/2014 14:21:04.....6.10.....30/07/2014 14:22:37.....6.13.....30/07/2014 14:21:04.....6.13
30/07/2014 14:21:06.....6.11.....30/07/2014 14:22:54.....6.13.....30/07/2014 14:22:37.....6.13
30/07/2014 14:22:37.....6.11.....30/07/2014 14:22:56.....6.13.....30/07/2014 14:22:54.....6.13
30/07/2014 14:22:54.....6.11.....30/07/2014 14:22:56.....6.14.....30/07/2014 14:22:56.....6.13
30/07/2014 14:22:56.....6.11.....30/07/2014 14:22:59.....6.13.....30/07/2014 14:22:59.....6.13
Into this:
BID TIME.....................BID.......ASK TIME....................ASK......TRADE TIME................TRADE
30/07/2014 14:21:04.....6.10.................................................30/07/2014 14:21:04.....6.13
30/07/2014 14:21:06.....6.11........................................................................................
30/07/2014 14:22:37.....6.11.....30/07/2014 14:22:37.....6.13.....30/07/2014 14:22:37.....6.13
30/07/2014 14:22:54.....6.11.....30/07/2014 14:22:54.....6.13.....30/07/2014 14:22:54.....6.13
30/07/2014 14:22:56.....6.11.....30/07/2014 14:22:56.....6.13.....30/07/2014 14:22:56.....6.13
............................................30/07/2014 14:22:56.....6.14............................................
............................................30/07/2014 14:22:59.....6.13.....30/07/2014 14:22:59.....6.13
I don't know VBA so hopefully there's a way of doing this with a basic Excel function.
I am trying to created a spreadsheet for work where I have created to validation drop down boxes, one each box has been selected i want it to return back with the correct answer in the 3rd column.
below are the 3 colums. i have created a validation for column 1 and 2 but when selected i want the final box to = column 3 ie. >=9, =2
120%
12
>=2
130%
13
>=2
140%
[code].....
I am trying to have rows moved from (Schedule) to (Complete) in the attached workbook. The criteria to have the row moved would be the user-selected "Status" list changing to "COMPLETE" in Column G.
I would like to have the row cut and deleted from Sheet4 (Schedule) once "COMPLETE" is selected from the list in Column G with rows below moving up. The row would then be inserted into Sheet2 (Complete) at the top of the list (Row 7) and rows would move down below the new entry. I would also like to have the formatting remain uniform (every other row fill)
